Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ray Analysis Physical Optics Gaussian Beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Recent Trends in the Analysis of Quasioptical Systems

The recent trend in microwave instruments is the use of multiple millimeter and submillimeter wavelength bands. These systems are typically analyzed by using physical optics, Gaussian beams or ray tracing techniques. Physical optics offers high accuracy at the expense of computation time. This trade-off becomes particularly apparent in the analysis of multiple reflector antennas, such as beam waveguide antennas, where physical optics is used to compute the current on each reflector from the current on the previous reflector. At the other end of the spectrum is ray tracing approaches that ignore diffraction effects entirely. These methods are fast but sacrifice the ability to predict some effects accurately. An intermediate approach is to use an appropriate set of expansion functions to model the field between the reflectors. If the set is chosen wisely only a few coefficients need to be determined from each reflector current. The field is then computed at the next reflector through the use of the expansion functions and their coefficients rather than by using the previous reflector current. For a beam waveguide system with no enclosing tubes an excellent set of expansion functions is the Gaussian beam mode set. In many cases a preliminary design which includes the effects on diffraction may be obtained by considering only the fundamental mode and a thin lens model for the reflectors. Higher-order modes are included to model the effects of the curved reflector, which include asymmetric distortion of the beam, cross polarization, and beam truncation. This paper describes a computer code implementing higher-order Gaussian beam scattering by multiple reflector systems. There are four essential steps in the algorithm. (1) Compute the current on the first reflector using physical optics using either a feed model or by an incident set of Gaussian beam modes. (2) Find the direction of propagation for the reflected Gaussian beam-set using ray tracing. (3) Determine the waist size and location for the output beam set by examining the amplitude and phase distribution of the current on the reflector. (4) Compute the amplitudes of the individual modes in the output mode set. These steps are then repeated for each addition reflector in the chain. In each of these cases the previous Gaussian beam set provides the input field for the current calculation. Details of the four steps discussed above will be discussed. Examples will compare results from the Gaussian beam approach to pure physical optics, illustrating both its merits and limitations. Hybrid approaches capable of eliminating some of the limitations will also be discussed.

Hoppe, D. J.↗

The full squeezed CMB bispectrum from inflation

The small-scale CMB temperature we observe on the sky is modulated by perturbations that were super-horizon at recombination, giving differential focussing and lensing that generate a non-zero bispectrum even for single-field inflation where local physics is identical. Understanding this signal is important for primordial non-Gaussianity studies and also parameter constraints from the CMB lensing bispectrum signal. Because of cancellations individual effects can appear larger or smaller than they are in total, so a full analysis may be required to avoid biases. I relate angular scales on the sky to physical scales at recombination using the optical equations, and give full-sky results for the large-scale adiabatic temperature bispectrum from Ricci focussing (expansion of the ray bundle), Weyl lensing (convergence and shear), and temperature redshift modulations of small-scale power. The δN expansion of the beam is described by the constant temperature 3-curvature, and gives a nearly-observable version of the consistency relation prediction from single-field inflation. I give approximate arguments to quantify the likely importance of dynamical effects, and argue that they can be neglected for modulation scales l∼<100, which is sufficient for lensing studies and also allows robust tests of local primordial non-Gaussianity using only the large-scale modulation modes. For accurate numerical results early and late-time ISW effects must be accounted for, though I confirm that the late-time non-linear Rees-Sciama contribution is negligible compared to other more important complications. The total corresponds to f{sub NL} ∼ 7 for Planck-like temperature constraints and f{sub NL} ∼ 11 for cosmic-variance limited data to l{sub max} = 2000. Temperature lensing bispectrum estimates are affected at the 0.2σ level by Ricci focussing, and up to 0.5σ with polarization.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of Partially coherent Wavefront Propagation Calculations for Design of Coherence-Preserving Synchrotron Radiation Beamlines

Ultra-low emittance third-generation synchrotron radiation (SR) sources, such as NSLS-II and MAX-IV, will offer excellent opportunities for further development of experimental techniques exploiting X-ray coherence. However, even in these new SR sources, the radiation produced by relativistic electrons (in undulators, wigglers and bending magnets) will remain only partially coherent in the X-ray spectral range. 'Extraction' of 'coherent portion' of the radiation flux and its transport to sample without loss of coherence must be performed by dedicated SR beamlines, optimized for particular types of experiments. Detailed quantitative prediction of partially coherent X-ray beam properties at propagation through optical elements, which is required for the optimization of such beamlines, can only be obtained from accurate and efficient physical-optics based numerical simulations. Examples of such simulations, made for NSLS-II beamlines, using 'Synchrotron Radiation Workshop' (SRW) computer code, are presented. Special attention is paid to the numerical analysis of the basic properties of partially coherent undulator radiation beam and its distinctions from the Gaussian beam. Performance characteristics of importance for particular beamlines, such as radiation spot size and flux at sample vs size of secondary source aperture for high-resolution microscopy beamlines, are predicted by the simulations.

43 PARTICLE ACCELERATORS↗

Application of partially coherent wavefront propagation calculations for design of coherence-preserving synchrotron radiation beamlines

Ultra-low emittance third-generation synchrotron radiation (SR) sources, such as NSLS-II and MAX-IV, will offer excellent opportunities for further development of experimental techniques exploiting X-ray coherence. However, even in these new SR sources, the radiation produced by relativistic electrons (in undulators, wigglers and bending magnets) will remain only partiallycoherent in the X-ray spectral range. 'Extraction' of 'coherent portion' of the radiation flux and its transport to sample without loss of coherence must be performed by dedicated SR beamlines, optimized for particular types of experiments. Detailed quantitative prediction of partially coherent X-ray beam properties at propagation through optical elements, which is required for the optimization of such beamlines, can only be obtained from accurate and efficient physical-optics based numerical simulations. Examples of such simulations, made for NSLS-II beamlines, using 'Synchrotron Radiation Workshop' (SRW) computer code, are presented. Special attention is paid to the numerical analysis of the basic properties of partially coherent undulator radiation beam and its distinctions from the Gaussian beam. Performance characteristics of importance for particular beamlines, such as radiation spot size and flux at sample vs size of secondary source aperture for high-resolution microscopy beamlines, are predicted by the simulations.

43 PARTICLE ACCELERATORS↗

Optical stress on the surface of a particle: Homogeneous sphere

A rigorous solution (generalized Lorenz-Mie theory) and an approximate solution (geometrical optics) are developed for the optical stress distribution on the surface of a homogeneous sphere. Demonstration calculations are made for plane-wave and Gaussian-beam illuminations. The influence of diffracted waves, surface waves, interference effects, caustic points, beam width, and refractive index on the stress is analyzed. The Debye series is used to evaluate the validity of geometrical optics and provides a quantitative analysis of the contribution of rays of different orders.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of the reflective optics for Tore Supra ECEI system

A 2D electron cyclotron emission (ECE) imaging system for Tore Supra is under design for studying the MHD physics of the magnetically confined plasma such as sawteeth, tearing modes, and turbulent fluctuations. Complex beam path due to the tight access in Tore Supra led to the design of reflective optics made of 6 or more large cylindrical/flat mirrors. The total path length of the ECE beam is about 11 m, including almost 4 m inside the vacuum vessel. The imaging property of the optics has been estimated using the Gaussian beam simulation and ray transfer analysis. The possible setups for the optical alignment of the diagnostic and the operation scenarios with single- or dual-array measurement system are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Bessel spatial profile of a soft x-ray laser beam

We report far-field profile measurements of an optical-field-ionized high-order harmonic-seeded soft x-ray laser. We show that the beam transverse profile can be controlled between a regular Gaussian shape and a Bessel profile exhibiting several rings via the infrared laser pump intensity. These experimental data are supported by a complete numerical modeling including a two-dimensional plasma amplifier simulation and a two-level soft x-ray amplification using a Maxwell-Bloch treatment. This model takes into account the experimental high-order harmonic wavefront and intensity before it is numerically amplified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quasi-optical beam tracing module development for millimeter-wave high-wavenumber collective scattering on the NSTX-U and EAST tokamaks

A Python3-based beam tracing code utilizing Quasi-Optics has been developed to track both incident and receiving beams in high-k collective millimeter wave scattering systems within magnetic fusion plasmas. In contrast to existing ray tracing codes that solely consider refraction, this beam tracing code incorporates diffraction phenomena, providing a more comprehensive calculation. Here, this enhanced capability allows for a more accurate calculation of the scattering volume and spatial resolution in high-k collective scattering systems, crucial for evaluating system performance and facilitating data analysis. Unlike Geometrical Optics, Quasi-Optics employs the complex eikonal method, representing a Gaussian beam as a collection of coupled rays to accurately preserve diffraction characteristics. The developed code is intended for application in NSTX-Upgrade and EAST high-k beam tracing analyses, targeting frequencies of 693 GHz and 270 GHz, respectively. The high-k system's primary objective is the observation of electron-scale instabilities. Employing a symplectic integrator, the code ensures numerical accuracy, assessed through the conservation of the Hamiltonian. With its precision and efficiency, the code facilitates rapid inter-shot analyses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The point-spread function of fiber-coupled area detectors

The point-spread function (PSF) of a fiber-optic taper-coupled CCD area detector was measured over five decades of intensity using a 20 mm X-ray beam and 2000-fold averaging. The ‘tails’ of the PSF clearly revealed that it is neither Gaussian nor Lorentzian, but instead resembles the solid angle subtended by a pixel at a point source of light held a small distance (27 mm) above the pixel plane. This converges to an inverse cube law far from the beam impact point. Further analysis revealed that the tails are dominated by the fiber-optic taper, with negligible contribution from the phosphor, suggesting that the PSF of all fiber-coupled CCD-type detectors is best described as a Moffat function.

47 OTHER INSTRUMENTATION↗

Regularities of femtosecond filamentation in the case of superposition of Gaussian and annular laser beams

The self-action of high-power femtosecond laser beams with a radiation wavelength of 800 nm (formed by superposition of Gaussian and annular beams) in air is theoretically modelled. A detailed analysis of self-focusing and filamentation of this radiation is performed based on the numerical solution of the spectral equation of the unidirectional propagation of a wave packet with allowance for the nonlinearity of the medium, and by tracing averaged diffraction-optical rays. It is shown that, in terms of the diffraction-beam optics, the outer annulus forms a waveguide, which facilitates self-trapping of the central part of the combined beam, supplying the light energy to the filament. The spatial stability of this waveguide depends on the energy stored in the annulus and on the distance from the latter to the beam axis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-photon fluorescence microscopy signal formation in highly scattering media: theoretical and numerical simulation

Using the radiative transfer theory and Monte Carlo simulations, we analyse the effect of scattering in a medium and of the size of the detector pinhole on the formation of the fluorescent signal in standard two-photon fluorescence microscopy (TPFM) systems. The theoretical analysis is based on a small-angle diffusion approximation of the radiative transfer equation, adapted to calculate the propagation of focused infrared radiation in media similar to the biological tissues in their optical properties. The accuracy of the model is evaluated by comparing the calculated excitation intensity in a highly scattering medium with the results of Monte Carlo simulations. To simulate a tightly focused Gaussian beam by the Monte Carlo method, the so called 'ray-optics' approach that correctly takes into account the finite size and shape of the beam waist is applied. It is shown that in the combined confocal and two-photon scanning microscopy systems not equipped with an external 'nondescanned' detector, the scattering significantly affects both the nonlinear excitation efficiency in the medium and the fluorescence collection efficiency of the system. In such systems, the rate of the useful TPFM signal in-depth decay is 1.5 - 2 times higher than in systems equipped with a 'nondescanned' detector. (application of lasers and laser-optical methods in life sciences)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase-space analysis and experimental results for secondary focusing at X-ray beamlines

Micro-focusing optical devices at synchrotron beamlines usually have a limited acceptance, but more flux can be intercepted if such optics are used to focus secondary sources created by the primary optics. Flux throughput can be maximized by placing the secondary focusing optics close to or exactly at the secondary source position. However, standard methods of beamline optics analysis, such as the lens equation or matching the mirror surface to an ellipse, work poorly when the source-to-optics distance is very short. In this paper the general characteristics of the focusing of beams with Gaussian profiles by a 'thin lens' are analysed under the paraxial approximation in phase space, concluding that the focusing of a beam with a short source-to-optics distance is distinct from imaging the source; slope errors are successfully included in all the formulas so that they can be used to calculate beamline focusing with good accuracy. A method is also introduced to use the thin-lens result to analyse the micro-focusing produced by an elliptically bent trapezoid-shaped Kirkpatrick-Baez mirror. The results of this analysis are in good agreement with ray-tracing simulations and are confirmed by the experimental results of the secondary focusing at the 18-ID Bio-CAT beamline (at the APS). The result of secondary focusing carried out at 18-ID using a single-bounce capillary can also be explained using this phase-space analysis. A discussion of the secondary focusing results is presented at the end of this paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase-matching analysis in high-order harmonic generation with nonzero orbital angular momentum Laguerre-Gaussian beams

Through high-order harmonic generation driven by intense ultrashort vortex infrared or midinfrared lasers, a nonzero orbital angular momentum can be imprinted onto extreme ultraviolet (XUV) or soft-x-ray (SXR) light pulses. Here we simulate the generation of vortex XUV harmonics in the gas medium as well as their propagation in vacuum till reaching the far field. In this work, we find that the intensity and phase of generated high harmonics are very sensitive to the position of gas jet with respect to the laser focus. The topological charge of the $\textit{q}$th harmonic is found to be $\textit{q}$ times that of the driving Laguerre-Gaussian beam. Each harmonic in the far field appears as a single ring in the transverse plane with an invariant diameter which is scalable with the fundamental topological charge only when the gas jet is placed after the laser focus. The underlying phase-matching mechanism is analyzed by examining the spatial map of the coherence length and by calculating the evolution of harmonic emission in the medium. We anticipate this work to stimulate interest in generating intense vortex XUV or SXR attosecond pulses for probing dynamics of molecules where special molecular features are difficult to be detected with linear or circular XUV or SXR pulses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗