SEARCH · Engineering Papers

Results for “Rapid performance assessment approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Design and performance assessment of a dual-mode latent thermal storage integrated heat pump across multiple climate zones

The electrification of space cooling and heating systems risks overloading the existing electrical grid during peak hours. Heat pumps integrated with thermal energy storage (HP-TES) offer a promising solution by shifting peak loads to off-peak hours, reducing grid strains. This work presents the design and assessment of a dual-mode HP-TES that uses a single 22°C phase-change material (PCM) as a heat source or sink in heating and cooling modes, respectively. Performance assessment was conducted using Modelica-based transient models, and full-year simulations were conducted across eight US climate zones using typical weather data. Two HP-TES performance metrics: peak energy reduction and recharge energy increases, were defined by comparing HP-TES energy consumption with base HP peak consumptions. Annual heating demand reductions (40–65%) exceeded cooling demand reductions (15–20%) due to the elimination of peak-hour backup heating. Cooling mode recharge energy requirements (0–10%) were reduced in locations with lower summer nighttime temperatures, while heating recharge requirements were lower than the high base-peak energy demand from backup heating. Simplified rapid methods that were 10 7 times faster than annual simulations were developed to predict seasonal cooling and heating energy reductions, and recharge energy requirements, with maximum deviations of ±2.5% and ±3.5% points. These methods enabled rapid parametric studies that identified optimal location-specific PCM temperatures between 22°C and 27°C, highlighting the need to consider both discharge and recharge energy requirements to achieve sustainable, energy-efficient peak load shifting across various climate zones.

25 ENERGY STORAGE↗

DOE OSTI2025

Replicative Assessment of Spectroscopic Equipment v3.1

The Replicative Assessment of Spectrometric Equipment (RASE) is a software for evaluating the performance of radiation detectors and isotope identification algorithms. It uses a semi-empirical approach to rapidly generate synthetic spectra and inject into detector's software to obtain nuclide identification response. RASE facilitates studies of spectroscopic device performance and a quantitative assessment of its capabilities to correctly distinguish and identify isotopes of interest in realistic scenarios

Sangiorgio, Samuele [Lawrence Livermore National L↗

DOE OSTI2026

Using Artificial Soiling to Rank Anti-Soiling Coatings for Arid Climates

A simple method to evaluate (e.g., screen and rank) the performance of coatings that are fully or partially anti-soiling (AS) is lacking within the PV industry. Artificial soiling may be used as a rapid and economical assessment approach, offering an efficient alternative to time-intensive, site-specific field testing. In this study, we present an artificial soiling method to replicate the anti-soiling performance rankings of two groups of coated glass samples supplied by two manufacturers (group C with CA, CP, and CS coatings; group A with AC coating). These are compared to field aging in two climates: semi-arid Lemoore, California over 4 months, and the hot desert in Mesa, Arizona over 7 months. Both field and indoor performance ranking utilize the transmittance ratio, defined as the optical transmittance between a coated sample and an uncoated reference in each group, as an evaluation metric to assess the effectiveness of the artificial soiling approach in replicating field soiling. It is critical to mimic the dominant field meteorological conditions associated with soiling-prone days and vulnerable times of day during the soiling season. Our results reveal that the use of artificial soiling for field performance ranking among coatings strongly depends on the soil type (composition and particle distribution), dust surface density, and prevalent environmental factors (wetting saturation by humidity, dew condensation extent, and prior weathering history of the coating). The similar rank order relative to the field suggests that the artificial soiling approach presented may be used for down-selecting anti-soiling coatings prior to prolonged field validation.

14 SOLAR ENERGY↗

DOE OSTI2025

Report on the Integration of Experimental and Modeling Data for Initial Equivalence Study of Mechanical Performance in Irradiated LPBF 316 Stainless Steel

To ensure the rapid development, deployment, and use of advanced nuclear technologies, faster qualification approaches are needed. Typically, the primary pathway uses traditional data packages consistent with the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, which does not consider the environmental effects the material will experience such as corrosion and radiation damage. Examining radiation effects requires a significant amount of space in US facilities at the Advanced Test Reactor and the High Flux Isotope Reactor (HFIR) and suffers from natural gradients in temperature and neutron flux profiles. Ion irradiation may enable rapid assessment of radiation-induced damage to a material and is proposed as part of an accelerated materials qualification framework through the Advanced Materials and Manufacturing Technologies program. To enhance the utility of ion irradiation as an examination tool, this report provides the initial assessment of engineering-relevant properties of microstructures produced from ion irradiation in the near-surface volume. Nanoindentation, Vickers hardness, and known tensile properties were brought together with simple mathematical models and experimental data for an initial equivalence study of the mechanical performance of irradiated laser powder bed fusion (LPBF) 316 stainless steels across length scales. Direct observation of the calculated ion irradiation yield stress and measured neutron irradiation yield stress at 2 dpa showed that both datasets exhibit the same trend with irradiation temperature and overlap within an acceptable band of stress values. Ion irradiations at 10 dpa serve as a prediction of properties to compare to postirradiation examination of HFIR-irradiated LPBF 316H further in the program. This work is a significant demonstration of the Licensing Approach with Ions and Neutrons, which uses ion irradiations to generate mechanical property information more rapidly than through neutron irradiations.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Mechanical Property Assessment of Unirradiated Cladding After Exposure to Time at Temperature

Light water reactors in the United States are operated within inherent safety limits designed to account for anticipated operational occurrences (AOOs). Unlike more severe reactor transients, these events permit the potential reuse of reactor cladding, highlighting the nuanced role of thresholds in influencing reactor efficiency compared to design-basis or beyond-design-basis transient conditions. The threshold designated for AOO peak cladding and fuel temperatures are currently grounded around thermal hydraulic limits such as surpassing the critical heat flux (CHF), rather than in fuel-cladding material performance. This CHF criterion therefore represents a conservative approach to AOO transients during the reactor lifetime. Extending this threshold to higher temperatures than CHF can result in additional operation efficiency gains. Here, a material performance-based approach is assessed to better understand the physical material limits of short time scale exposures to elevated temperatures. This approach, termed time at temperature (t@T), references fuel cladding microstructural and mechanical response to rapid temperature transients in absence of radiation damage. The results of this work are expected to help identify margin for the United States reactor fleet, which could be utilized to increase operational efficiencies through decreased reactor outages.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

JUSTIFI: Software for Improving Performance Objectives via Energy Efficiency

With growing energy supply concerns and rising costs, energy efficiency is a critical component of industrial energy resilience and competitiveness by directly reducing energy operating costs. Energy efficiency projects in manufacturing also yield valuable benefits to other key metrics, such as improved quality, reduced maintenance costs, improved safety, decreased pollution, and enhanced productivity. However, it is difficult to receive approval for energy efficiency projects, so implementation rates are low, even when meeting capital project payback period criteria. The inclusion and quantification of non-energy benefits (NEBs) in the decision-making process for energy efficiency projects can improve the overall financial payback period while demonstrating a positive impact on the firm's key performance metrics and business strategy. Despite their significant financial and strategic value, NEBs are rarely factored into decision-making due to lack of tools to effectively identify and quantify them. Therefore, a comprehensive and integrative approach is needed for the rapidly evolving energy landscape. To address these challenges, through funding from U.S. Department of Energy, our new assessment methodology integrates common continuous improvement six sigma concepts, such as the DMAIC process, and a protocol of guiding questions, into energy efficiency assessments to identify NEBs. We have also developed open-source software, JUSTIFI, to guide users through this process, data collection, and quantification. It is designed to be used concurrently with DOE energy system analysis software suite, MEASUR. Our methodology and tools inform energy assessors, firm engineering, decision makers, and workforce seeking to increase energy resilience and to maximize benefits aligned with performance metrics.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2026

JUSTIFI: Software for Improving Performance Objectives via Energy Efficiency

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Exploring the Landscape of Distributed Graph Clustering on Leadership Supercomputers

The rapid growth of large-scale datasets in fields like biology and social networks has driven the need for advanced graph analytics techniques. Community detection, a fundamental task in graph analytics, identifies closely connected groups of nodes within a network, providing valuable insights across various disciplines. This study focuses on two classic community detection methods, the Louvain algorithm and Markov Clustering (MCL), and evaluates the performance of two prominent distributed community detection algorithms: HiPDPL-GPU, our prior implementation, and HipMCL. We conduct experiments on GPU-accelerated heterogeneous HPC systems, Summit and Frontier, to assess their performance under varying conditions. Our objective is to identify the strengths and weaknesses of these algorithms in terms of scalability, and quality of solutions. We evaluate these algorithms on a diverse set of 70+ networks spanning 13 domains, with sizes ranging up to 4.2 billion edges. Our results demonstrate that HiPDPL-GPU consistently outperforms HipMCL, especially for large-scale networks. HiPDPL-GPU achieves significantly faster runtimes (47x to 1439x), higher modularity scores, and improved scalability. These findings highlight HiPDPL-GPU as a promising solution for efficient and effective large-scale graph analytics in diverse application domains, and provide insights into the feasibility of using MCL-based approaches for certain application domains.

Community detection, graph algorithms↗

DOE OSTI2026

Computational Design of Interlayers for Thermally Stable Compositionally Graded Coatings on Nickel Alloys

To extend the service life of Ni-based superalloys, refractory metal coatings are often used. However, direct bonding between metals with dissimilar crystal structure promotes brittle intermetallic phase formation. This work presents a computational thermodynamic framework for high throughput design of functionally graded interlayers to suppress deleterious phases that may form at the interlayer. The Thermo-Calc software package was used to screen candidate metallic interlayer elements based on stability of solid-solution phases. Vanadium was identified as a promising interlayer due to its consistent suppression of intermetallic phases. Temperature-dependent phase diagram mapping between 600 and 1000 °C guided selection of a compositional pathway that significantly reduced intermetallic formation compared to directly joining the Ni-based and Nb refractory alloys. Time–temperature–transformation analysis was performed to assess whether equilibrium-predicted phases are kinetically accessible along regions of the graded path where non-solid-solution phases are not fully suppressed. The methodology was further applied to additional Ni-based alloy and coating systems, illustrating its transferability as an approach for rapid computational design of graded interlayers in dissimilar high-temperature materials.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Exploring the Functional Performance of a Commercial High-Temperature Photopolymer Resin for Vat Photopolymerized Injection Molding Tools

Additive manufacturing (AM) presents a promising approach for rapid tooling, offering significant reductions in production costs and lead times compared to that of conventional moldmaking processes. This work examines the fabrication of molds for injection molding through vat photopolymerization (VPP) AM, using a commercially available photopolymer resin intended for high temperature applications (High Temp V2 resin). The photorheological behavior of the resin is examined to evaluate its curing kinetics and mechanical development during polymerization, ensuring suitability for mold fabrication. The thermal and mechanical properties of the printed photopolymer resin are characterized, alongside assessments of dimensional accuracy and surface finish, which are critical factors influencing the performance and quality of injection molded parts. Additionally, specimens produced using VPP-fabricated molds are evaluated and benchmarked against those molded with traditional metal molds.

Jones, Haley W. [Savannah River National Laborator↗

DOE OSTI2025

Deep learning model for fast, science-based forecasting of fluid migration along faults in geologic carbon storage scenarios

Effective long-term geologic storage depends on robust site selection and credible, science-based forecasting of subsurface behavior to ensure storage integrity. For this work, we develop a deep learning–based reduced-order model (ROM) to quantify potential carbon dioxide (CO₂) and brine migration through geological faults. The ROM combines a Transformer model for binary classification and a Stacked Ensemble for regression, trained on a comprehensive dataset generated from 1400 physics-based reservoir simulations. Key geologic and operational parameters—including fault geometry, reservoir structure, and injection conditions—were systematically varied to capture a wide range of fluid migration scenarios. The ROM accurately predicts the onset of migration, cumulative migration volumes of both CO₂ and brine, and associated migration rates, as compared to an independent set of validation simulations, while significantly reducing computational cost compared to traditional simulation methods. Model performance was evaluated across diverse fault configurations, revealing that shallow reservoir geometry and fault angle are among the most influential factors governing migration behavior. Sensitivity analysis using SHapley Additive exPlanations (SHAP) provided interpretability, revealing distinct patterns in how geological and operational features drive transient versus cumulative migration outcomes. The ROM’s ability to rapidly simulate fault migration scenarios enables efficient sensitivity analyses, scenario evaluations, and decision support for site selection and monitoring design. This approach enhances the safety, scalability, and long-term operational performance of geologic carbon storage (GCS) systems by providing a robust, interpretable tool for predicting subsurface fluid migration and assessing fault-related migration potential.

42 ENGINEERING↗

DOE OSTI2025

Benchmarking universal machine learning interatomic potentials for rapid analysis of inelastic neutron scattering data

The accurate calculation of phonons and vibrational spectra remains a significant challenge, requiring highly precise evaluations of interatomic forces. Traditional methods based on the quantum description of the electronic structure, while widely used, are computationally expensive and demand substantial expertise. Emerging universal machine learning interatomic potentials (uMLIPs) offer a transformative alternative by employing pre-trained neural network surrogates to predict interatomic forces directly from atomic coordinates. This approach dramatically reduces computation time and minimizes the need for technical knowledge. In this paper, we produce a phonon database comprising nearly 5000 inorganic crystals to benchmark the performance of several leading uMLIPs. We further assess these models in real-world applications by using them to analyze experimental inelastic neutron scattering data collected on a variety of materials. Through detailed comparisons, we identify the strengths and limitations of these uMLIPs, providing insights into their accuracy and suitability for fast calculations of phonons and related properties, as well as the potential for real-time interpretation of neutron scattering spectra. Our findings highlight how the rapid advancement of AI in science is revolutionizing experimental research and data analysis.

inelastic neutron scattering↗

DOE OSTI2026

A Benchmarking Framework for Evaluating Large Language Model Capabilities in Nuclear Reactor Safety Applications

Large language models (LLMs) are increasingly capable of answering technical questions, synthesizing domain knowledge, and supporting engineering workflows. For nuclear science and engineering, these capabilities require careful, domain-specific evaluation before they can be credibly incorporated into safety-related activities, regulatory review, or technical decision support. This paper presents preliminary results from benchmarking framework for evaluating LLM capabilities in nuclear contexts. The framework is organized into three evaluation categories: nuclear fundamentals, general dual-use knowledge, and plant specific knowledge. These categories are intended to distinguish general nuclear engineering competence from broader technical reasoning and more context-dependent nuclear knowledge. Initial evaluations focus on nuclear fundamentals using questions representative of the knowledge expected of a nuclear professional engineer. Results indicate that contemporary frontier models perform at a high level and substantially exceed the performance of older model generations, with some models approaching saturation of the current benchmark. These findings suggest both the rapid improvement of LLM capabilities in specialized technical domains and the need for more discriminating evaluation methods. The paper presents the benchmark structure, preliminary model-comparison results, and ongoing work. This work supports development of verifiable, responsible, and safety-conscious methods for assessing AI systems in nuclear engineering applications.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

DOE OSTI2026

Intercomparison of flood inundation models across land use types and hydrological flood stages

Flood Inundation Mapping (FIM) model selection is a key operational decision because accurate, rapid mapping underpins early warning and resource allocation. FIM performance is context-dependent and can vary with hydrograph phase, land-use/land-cover (LULC), and the evaluation benchmark. Intercomparison studies typically assess a single near-peak snapshot against one reference dataset. Here, we provide a context-stratified intercomparison across (i) multiple hydrograph phases, (ii) LULC classes, and (iii) benchmark types, for five FIM approaches spanning a wide range of physical complexity and operational cost (TRITON, LISFLOOD-FP, HEC-RAS 2D, ARC-Curve2Flood, and OWP HAND-FIM). We use the Hurricane Matthew flood (2016) in the Neuse River Basin, North Carolina, USA, as a case study. Using high-resolution remote sensing-derived flood inundation maps, hand-labeled points, and building footprints, we assess model skill across two rising and two falling hydrograph limbs and across major LULC types. Results show that model rankings shift systematically across contexts: LISFLOOD-FP ranks highest in three of four flood phases, while TRITON leads during one rising limb phase; LISFLOOD-FP performs best in vegetated areas, whereas HEC-RAS improves relative performance in agricultural and urban areas; and benchmark choice influences conclusions, with LISFLOOD-FP performing best for flooded-building detection in the late falling limb, while TRITON ranks highest against hand-labeled points. We also report representative wall-clock runtimes for each workflow to provide use-case context for operational feasibility. Together, these results offer transferable guidance for model selection and for designing large-scale, benchmark-aware FIM intercomparison studies.

Nikrou, Parvaneh [University of Alabama]↗

DOE OSTI2026

Model-based, in-situ, non-destructive qualification and certification of parts made by autonomous additive manufacturing

To address the significant productivity challenges associated with the qualification and certification (Q&C) tasks of additively manufactured (AM) parts, which have traditionally relied on rigorous post‐build inspection and testing, we propose an integrated framework that combines model‐based qualification and certification (MBQ&C) with autonomous additive manufacturing (AAM). MBQ&C employs high‐fidelity predictive models, developed within the Integrated Computational Materials Engineering (ICME) paradigm, to simulate process–structure–property–performance relationships for assessing a part’s fitness for use. Since predictive models are commonly machine learning (ML)-based or reduced-order surrogates of validated physics models, they run efficiently, enabling timely inference. In parallel, the self-driving AAM utilises ML-based adaptive, closed‐loop control strategies to avoid, mitigate, or repair defects and anomalies during fabrication, thereby increasing the likelihood of producing acceptable parts. A key feature of the combined AAM-MBQ&C framework is that predictive models explicitly incorporate defects or anomalies that persist after the build, using instance-specific data captured via in-situ sensing. This customisation enables a build‐specific assessment of fitness for use, rather than relying on nominal or generic parameters. Such individualised evaluation provides a robust basis for Q&C-related acceptance decisions relating to each build. Additionally, the rapid solution capabilities of ML or reduced-order models enable the determination of a part’s suitability for service shortly after build completion. As the framework matures, it has the potential to substantially reduce reliance on conventional point‐design approaches—such as time‐consuming post‐build computed tomography scanning and costly destructive testing. Thus, the AAM-MBQ&C framework represents a transformative, scalable strategy for quality assurance of AM components, as parts produced within a stable, validated, and certified envelope can be certified with reduced testing. Key benefits include: (1) significant gains in Q&C productivity through efficient, model-centric assessment; (2) performance-based classification of defects into critical and non-critical categories; (3) the ability to predict potential deviations in the performance of parts affected by real-time, adaptive process control interventions relative to those produced under a certified process, and (4) the enabling of virtual Q&C for service environments that are difficult, hazardous, or impractical to access or reproduce experimentally. Collectively, these capabilities strengthen the business case for AM, particularly for high‐consequence and mission‐critical applications. Finally, although this work focuses on powder-based AM, the proposed techniques could be extended to AM processes employing alternative feedstock forms.

Gunasegaram, Dayalan↗

DOE OSTI2026

Ecological Insights from Transferable Plant Biomass Mapping across the Arctic using High-resolution Structure-from-Motion and LiDAR Data

Warmer temperatures, permafrost thaw, and increased wildfire activity are driving rapid ecological change across the Arctic, significantly altering plant productivity and aboveground biomass (AGB). These rapid changes highlight the urgent need to improve monitoring of vegetation dynamics in the Earth’s northern ecosystems, where high spatiotemporal heterogeneity occurs at scales finer than those captured by traditional satellite observations. The growing use of Unoccupied Aerial Systems (UASs) presents an opportunity to overcome this limitation. Yet, the diversity of UAS platforms, sensors, and data collection and processing workflows presents challenges for developing standardized, generalizable approaches. To address this challenge, we compiled 672 AGB plots co-located with 183 UAS-based Structure-from-Motion (SfM) or Light Detection and Ranging (LiDAR) surveys collected across the Arctic. Here, we: (1) evaluated the generalizability of UAS-derived canopy structure derived from high-resolution SfM and LiDAR for estimating AGB, (2) assessed scaling errors and their sources in two recent satellite-based AGB products derived from Landsat and MODIS, and (3) demonstrated the use of high-resolution AGB maps to quantify biomass variation across tundra plant functional types (PFTs) and to monitor post-fire recovery. Our results show that both SfM and LiDAR accurately captured AGB and its variability across tundra PFTs using a Random Forest (RF) model (overall RMSE: 0.336 kg/m2), with mapping performance varying slightly by region and data source. Using UAS-derived AGB maps as a benchmark, we identified systematic biases in satellite-derived AGB products, largely attributable to the magnitude of AGB and structural heterogeneity within coarse-resolution pixels. Applying our model to repeat UAS surveys following a tundra fire on Seward Peninsula, we observed rapid AGB recovery in non-shrub patches, with biomass recovering to pre-fire levels within 2 years. In contrast, shrub patches recovered more slowly, with AGB gains continuing over 2–4 years through both in-patch growth and lateral expansion (via dispersal) into remaining burned areas. Overall, these findings demonstrate the generalizability of UAS-based SfM and LiDAR data for estimating tundra AGB and highlight the potential of our approach to be broadly applied to generate high-quality AGB data for ecological monitoring and model benchmarking across the Arctic.

Yang, Daryl [ORNL] (ORCID:0000000317057823)↗

DOE OSTI2025

Burnup Monitoring for Pebble Bed Reactor Systems

A pebble burnup monitoring system is a required component for domestic reactor safety and safeguards applications associated with pebble bed reactors (PBRs). One of the main requirements of a PBR burnup monitoring system is that it needs to be capable of rapid measurements to assess the burnup of each individual pebble to determine whether to recirculate it in the reactor or discard it as spent fuel. This report considers three different approaches for a burnup monitoring system for pebbles discharged from the reactor core in a pebble bed modular reactor-400: • passive gamma spectrometry measurement, • passive neutron coincidence measurement, and • active neutron counter based on the differential die-away technique. Conceptual designs have been created for each of these detectors, and preliminary analysis has been performed using Monte Carlo N-Particle and Oak Ridge Isotope Generation code simulations. The advantages and practical limitations (e.g., high radiation background) of each system were identified. Simulations suggest that each of the three measurement techniques can be successfully employed to distinguish between pebbles based on their number of passes through the core and to quantify the burnup of pebbles.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

A call to standardize metrics for monitoring baleen whales near marine construction activities

Effective monitoring is necessary to protect marine mammal species during the construction of offshore infrastructure. The tools for detecting or monitoring marine mammals span traditional (e.g., visual observers, optical cameras), to newer (e.g., passive acoustic monitoring, infrared cameras, tags), and emerging (e.g., satellite imagery, environmental DNA, dimethyl sulfide concentration) technologies. Some are better suited for use during offshore development; however, peer-reviewed literature does not typically evaluate and report on the performance of these various technologies. We define a minimum set of metrics related to efficacy (i.e., confusion matrix, precision and recall, probability of missed mitigation), detection range (i.e., maximum and reliable detection range, spatial resolution), and data delivery (i.e., detection latency, system reliability, temporal resolution) that we recommend are needed to assess the utility of monitoring technologies for this purpose. Following a literature review of relevant studies, we highlight which publications reported these metrics and used multiple technologies to compare relative performance. We also emphasize the benefits of multi-modal approaches and recommend performance assessments through modeling or large-scale collaborative field testing. These metrics will standardize data collection, reporting, and analysis; promote consistent and comparable results; and foster collaboration among developers, regulatory agencies, and scientists. This may lead to the co-development of technology that achieves multiple goals, has greater application, and can answer research questions while collecting data to fulfill permitting requirements. These metrics may also inform decisions on what systems regulatory agencies might consider using and reduce monitoring costs, which is critical to support the marine sector's rapid growth alongside marine mammal conservation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗