Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Raman opacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Opacity from two-photon processes

Here, the recent iron opacity measurements performed at Sandia National Laboratory by Bailey and collaborators have raised questions about the completeness of the physical models normally used to understand partially ionized hot dense plasmas. We describe calculations of two-photon absorption, which is a candidate for the observed extra opacity. Our calculations do not yet match the experiments but show that the two-photon absorption process is strong enough to require careful consideration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication of highly transparent diamond-like carbon anti-reflecting coating for Si solar cell application

ARC grade highly transparent unhydrogenated diamond-like carbon (DLC) films were produced, directly from a-C target, using RF magnetron sputtering deposition technique, for optoelectronic applications. Optical band gap, transmittance, reflectance, sp{sup 3} fraction, I{sub D}/I{sub G}, density, and refractive index of the films have been estimated with the help of optical tools like Uv-vis spectrophotometer, ellipsometer and micro-Raman. Optimum ARC-qualities have been identified in low-temperature grown DLC films at an Ar pressure of 4 mTorr in the reactor, accomplishing its key requirements for use in silicon solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and characterization of a third order nonlinear optical single crystal: Ethylenediamine-4-nitrophenolate monohydrate

Highlights: • EDA4NPH crystal possesses negative nonlinear refractive index. • The crystal exhibits high third-order NLO susceptibility. • Wide transparency of the crystal makes it suitable for NLO applications. • Dielectric studies substantiate the suitability for electro-optic applications. • The crystal possesses suitable mechanical strength for device fabrication. - Abstract: Bulk crystals of the charge-transfer complex, ethylenediamine-4-nitrophenolate monohydrate, were grown by slow solvent evaporation method from aqueous solution at room temperature. The X-ray diffraction measurements showed that the crystal belongs to centrosymmetric space group C2/c of monoclinic system. The functional groups in the complex were identified using FTIR, FTRaman and FTNMR analyses. The Z-scan measurements revealed the negative nonlinear refractive index of the crystal. The nonlinear absorption coefficient and third order nonlinear optical susceptibility calculated from the measurements were −3.5823 × 10{sup −3} cm/W and 2.3762 × 10{sup −6} esu respectively. The crystal was shown to be highly transparent above 366 nm by UV–vis spectroscopy and a yellow fluorescence was observed from PL spectrum. The TG–DTA and DSC analyses showed that the crystal is thermally stable up to 117.4 °C. The crystals were characterized by dielectric, etching and microhardness studies.

36 MATERIALS SCIENCE↗

Characterization on RF magnetron sputtered niobium pentoxide thin films

Niobium pentoxide (Nb{sub 2}O{sub 5}) thin films with amorphous nature were deposited on microscopic glass substrates at 100°C by rf magnetron sputtering technique. The effect of rf power on the structural, morphological, optical, and vibrational properties of Nb{sub 2}O{sub 5} films have been investigated. Optical study shows the maximum average transmittance of about 87% and the optical energy band gap (indirect allowed) changes between 3.70 eV and 3.47 eV. AFM result indicates the smooth surface nature of the samples. Photoluminescence measurement showed the better optical quality of the deposited films. Raman spectra show the LO-TO splitting of Nb-O stretching of Nb{sub 2}O{sub 5} films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of graphene-like transparent conductive films on dielectric substrates using a modified filtered vacuum arc system

Here, we present a reliable process to deposit transparent conductive films on silicon oxide, quartz, and sapphire using a solid carbon source. This layer consists of partially ordered graphene flakes with a lateral dimension of about 5 nm. The process does not require any catalytic metal and exploits a high current arc evaporation (Φ-HCA) to homogeneously deposit a layer of carbon on heated substrates. A gas atmosphere consisting of Argon or Argon/Hydrogen blend acting as a buffer influences the morphology of the growing film. scanning tunneling microscopy, transmission electron microscopy, and Raman spectra were used for a thorough characterization of the samples in order to optimize the growth parameters. The best carbon layers have a surface resistance of 5.7 × 10{sup 3} Ω{sub ◻} whereas the optical transparency of the coatings is 88% with an excellent homogeneity over areas of several cm{sup 2}. Such results are compatible with most semiconductor fabrication processes and make this method very promising for various industrial applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of Highly Conducting Optically Transparent Films with Multigraphene Structure via Carbonization of Polyimide Langmuir–Blodgett Films

Multigraphene films have been for the first time obtained on the surface of quartz glass via carbonization of polyimide Langmuir–Blodgett films. The Raman spectra of the films show bands G and D and a broad band at 2300–3200 cm{sup –1}, which are characteristic of graphite-like films. The transmission electron microscopy demonstrated that the films are constituted by “stacks” of layers spaced by 0.36 nm. The surface resistance of the 5-nm-thick films was 1.2 ± 0.2 kΩ, and the transmittance was 87% at λ = 550 nm. The transmittance was 97% in the IR part of the spectrum and 70–80% in the UV part.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Irreversible thermochromic response of RF sputtered nanocrystalline BaWO{sub 4} films for smart window applications

We report irreversible thermochromic behaviour of BaWO{sub 4} (BWO) films for the first time. BWO films have been deposited at different substrate temperatures (RT, 200, 400, 600 and 800 °C) using RF magnetron sputtering in pure argon plasma. BWO films deposited at 800 °C exhibit crystalline nature. Also, BWO films deposited in the temperature range of 400 - 600 °C exhibit WO{sub 3} as a secondary phase and its weight percentage decreases with an increase in deposition temperature, whereas the films deposited at 800 °C exhibited pure tetragonal phase. FESEM images revealed that as the average particle sizes of the films are higher as compared with the thickness of the films and is explained based on Avrami type nucleation and growth. The transmittance of the films decreases with an increase in deposition temperature up to 600 °C and increases thereafter. Films deposited at 600 °C show ≤ 20% transmittance, looking at the films deposited at room temperature and 800 °C exhibits 90 and 70%, respectively. The refractive index and extinction coefficient of the films show profound dependence on crystallinity and packing density. The optical bandgap of BWO films increases significantly with an increase in O{sub 2}% during the deposition. The optical bandgap of the BWO films deposited at different temperatures in pure argon plasma, are in the range of 3.7 to 3.94 eV whereas the films deposited at 600 °C under different O{sub 2} plasma are in the range of 3.6 - 4.5 eV. The formations of colour centres are associated with the oxygen vacancies, which are clearly seen from the optical bandgap studies. The observed irreversible thermochromic behaviour in BWO films is attributed to the presence of oxygen vacancies that arises due to the electrons trapped at oxygen vacancies causing an inter valence charge transfer of W{sup 5+} to W{sup 6+} and is confirmed through the change in the optical density (ΔOD). Further, the Raman spectra are being used to quantify the presence of oxygen vacancies and the formation of pure BWO phase. The obtained optical responses of BWO films are promising for solar cell and smart window applications.

36 MATERIALS SCIENCE↗

Growth, structural and optical characterization of L-histidine 4-nitrophenolate (LHPNP) single crystals for NLO applications

Using slow evaporation solution growth technique, single crystals of L-histidine-4-nitro phenolate has been grown from the solution. Structural analyses were carried out by powder x-ray diffraction, FT-Raman, Fourier Transform Infrared and Nuclear Magnetic Resonance spectral methods to conform the grown crystals. Thermal stability of the grown crystals was studied by thermo-gravimetric (TG) and differential thermal analyses (DTA). UV-Vis spectral analysis has been carried out to find the transparency of the grown crystal. Nonlinear optical property has been confirmed by Kurtz powder technique. The PL measurements were carried out in Perkin Elmer LS 55 Luminescence spectrometer using 410 nm as excitation wavelength. The observed properties have confirmed that the grown crystal is suitable for nonlinear optical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thickness modulated MoS{sub 2} grown by chemical vapor deposition for transparent and flexible electronic devices

Two-dimensional (2D) materials have been a great interest as high-performance transparent and flexible electronics due to their high crystallinity in atomic thickness and their potential for variety applications in electronics and optoelectronics. The present study explored the wafer scale production of MoS{sub 2} nanosheets with layer thickness modulation from single to multi-layer by using two-step method of metal deposition and CVD process. The formation of high-quality and layer thickness-modulated MoS{sub 2} film was confirmed by Raman spectroscopy, AFM, HRTEM, and photoluminescence analysis. The layer thickness was identified by employing a simple method of optical contrast value. The image contrast in green (G) channel shows the best fit as contrast increases with layer thickness, which can be utilized in identifying the layer thickness of MoS{sub 2}. The presence of critical thickness of Mo for complete sulphurization, which is due to the diffusion limit of MoS{sub 2} transformation, changes the linearity of structural, electrical, and optical properties of MoS{sub 2}. High optical transparency of >90%, electrical mobility of ∼12.24 cm{sup 2} V{sup −1} s{sup −1}, and I{sub on/off} of ∼10{sup 6} characterized within the critical thickness make the MoS{sub 2} film suitable for transparent and flexible electronics as compared to conventional amorphous silicon (a-Si) or organic films. The layer thickness modulated large scale MoS{sub 2} growth method in conjunction with the layer thickness identification by the nondestructive optical contrast will definitely trigger development of scalable 2D MoS{sub 2} films for transparent and flexible electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

RAMAN SCATTERING BY MOLECULAR HYDROGEN AND NITROGEN IN EXOPLANETARY ATMOSPHERES

An important source of opacity in exoplanet atmospheres at short visible and near-UV wavelengths is Rayleigh scattering of light on molecules. It is accompanied by a related, albeit weaker process—Raman scattering. We analyze the signatures of Raman scattering imprinted in the reflected light and the geometric albedo of exoplanets, which could provide information about atmospheric properties. Raman scattering affects the geometric albedo spectra of planets in the following ways. First, it causes filling-in of strong absorption lines in the incident radiation, thus producing sharp peaks in the albedo. Second, it shifts the wavelengths of spectral features in the reflected light causing the so-called Raman ghost lines. Raman scattering can also cause a broadband reduction of the albedo due to wavelength shifting of a stellar spectrum with red spectral index. Observing the Raman peaks in the albedo could be used to measure the column density of gas, thus providing constraints on the presence of clouds in the atmosphere. Observing the Raman ghost lines could be used to spectroscopically identify the main scatterer in the atmosphere, even molecules like H{sub 2} or N{sub 2}, which do not have prominent spectral signatures in the optical wavelength range. If detected, ghost lines could also provide information about the temperature of the atmosphere. In this paper, we investigate the effects of Raman scattering in hydrogen- and nitrogen-dominated atmospheres. We analyze the feasibility of detecting the signatures of Raman scattering with the existing and future observational facilities, and of using these signatures as probes of exoplanetary atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗

Growth and characterization of new semiorganic nonlinear optical and piezoelectric lithium sulfate monohydrate oxalate single crystals

Highlights: • A new semiorganic single crystal of LSO grown by slow evaporation technique. • Morphological studies of the LSO crystal deduced by BFDH law. • In the UV–vis spectrum wide transparent region and large band gap were found. • SHG is equal to KDP crystal and d{sub 33} was found to be equal to 6pC/N. • Grown crystal belongs to softer category. - Abstract: New semiorganic crystal of lithium sulfate monohydrate oxalate (LSO) for nonlinear application was synthesized by controlled slow evaporation method. The growth rate of various planes of the grown crystal was estimated by morphological study. Single crystal XRD analysis confirmed that the crystal belongs to triclinic lattice with space group P1. High transparency (∼95%) with large band gap (4.57 eV) was analyzed by UV–vis studies. FTIR and Raman spectroscopy were used to identify various functional groups present in the LSO crystal. SHG efficiency was found to be equal to the KDP crystal. Thermal stability (up to 117.54 °C) and melting point (242 °C) of the crystal were studied by TG-DTA. In dielectric measurements, the value of dielectric constant decreases with increase in frequency. Hardness studies confirmed soft nature of crystals. The piezoelectric coefficient was found to be 6pC/N along [0 0 1].

36 MATERIALS SCIENCE↗

Structural, optical and dielectric properties of Ce{sup 3+}, Pr{sup 3+}, Nd{sup 3+} doped LaF{sub 3} hexagonal nanoparticles

Well dispersed, elongated and hexagonal LaF{sub 3}: Ce{sup 3+}, Pr{sup 3+}, Nd{sup 3+} nanocrystals have been synthesized by microwave assisted technique. X-ray diffraction (XRD) studies indicates the formation of nanocrystals with unit cell parameters a = b = 7.144 A{sup 0}, c = 7.281 A{sup 0}, (c/a = 1.019) and unit cell volume of 321.86 (A{sup 0}){sup 3} of average crystallite size 21 nm have been traced by from XRD analysis and it is close agreement with transmission electron microscope (TEM) analysis. Ultra-violet (UV) absorption spectrum shows an edge at 250 nm indicating presence of wide transparency window region between 200 nm-800 nm. Fundamental groups have been observed in the Fourier transformation infrared (FTIR) and FT-Raman spectra. The blue luminescent properties of the nanoparticles were investigated by excitation and emission spectra. Room temperature Electrical and dielectric properties were studied for the synthesized nanocrystals the values of conductivity & resistivity is found to be in the order of 10{sup −6} Scm{sup −1} and resistivity 10{sup 5} Ω cm. Low dielectric constant value was observed in the LaF{sub 3}: Ce{sup 3+}, Pr{sup 3+}, and Nd{sup 3+} nanocrystals at high frequency indicating its suitability for electro optics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cationic coordination compound Cs{sub 2}Hg{sub 3}I{sub 8} for IR NLO material: Synthesis, crystal growth and characterizations

Single crystals Cs{sub 2}Hg{sub 3}I{sub 8} of dimensions 5 × 3 × 4 mm{sup 3} were grown by solution growth method at room temperature and structurally characterized by single crystal X – ray diffraction. Cs{sub 2}Hg{sub 3}I{sub 8} compound crystallizes in a noncentrosymmetric space group Cm with the crystal data of a = 7.4415 Å, b = 21.6629 Å, c = 7.6726 Å, α, β = 90°, γ = 108.05° and Z = 2. The grown crystals were characterized by powder X – ray diffraction analysis and the various diffraction planes are indexed. The presence of functional groups was identified qualitatively by Fourier transform infrared and FT – Raman spectral analyses. Ultraviolet – visible spectral analyses shows that the crystal has low UV cut off at 388 nm combined with very good transparency of 98 % in a wide range. The optical band gap was estimated to be 3 eV. Mechanical hardness of the grown crystal Cs{sub 2}Hg{sub 3}I{sub 8} was determined. The dielectric response of the crystal with varying frequencies was studied. Differential scanning calorimetry (DSC) analysis shows that the grown crystal has very good thermal stability up to 97.5°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bandgap measurements and the peculiar splitting of E{sub 2}{sup H} phonon modes of In{sub x}Al{sub 1-x}N nanowires grown by plasma assisted molecular beam epitaxy

The dislocation free In{sub x}Al{sub 1-x}N nanowires (NWs) are grown on Si(111) by nitrogen plasma assisted molecular beam epitaxy in the temperature regime of 490 °C–610 °C yielding In composition ranges over 0.50 ≤ x ≤ 0.17. We study the optical properties of these NWs by spectroscopic ellipsometry (SE), photoluminescence, and Raman spectroscopies since they possesses minimal strain with reduced defects comparative to the planar films. The optical bandgap measurements of In{sub x}Al{sub 1-x}N NWs are demonstrated by SE where the absorption edges of the NW samples are evaluated irrespective of substrate transparency. A systematic Stoke shift of 0.04–0.27 eV with increasing x was observed when comparing the micro-photoluminescence spectra with the Tauc plot derived from SE. The micro-Raman spectra in the NWs with x = 0.5 showed two-mode behavior for A{sub 1}(LO) phonons and single mode behavior for E{sub 2}{sup H} phonons. As for x = 0.17, i.e., high Al content, we observed a peculiar E{sub 2}{sup H} phonon mode splitting. Further, we observe composition dependent frequency shifts. The 77 to 600 K micro-Raman spectroscopy measurements show that both AlN- and InN-like modes of A{sub 1}(LO) and E{sub 2}{sup H} phonons in In{sub x}Al{sub 1-x}N NWs are redshifted with increasing temperature, similar to that of the binary III group nitride semiconductors. These studies of the optical properties of the technologically important In{sub x}Al{sub 1-x}N nanowires will path the way towards lasers and light-emitting diodes in the wavelength of the ultra-violet and visible range.

36 MATERIALS SCIENCE↗

Dy{sup 3+}-doped Ga–Sb–S chalcogenide glasses for mid-infrared lasers

Highlights: • Novel Ga–Sb–S chalcogenide glasses doped with Dy{sup 3+} ions were synthesized. • The glasses show good thermal stability and excellent infrared transparency. • The glasses show low phonon energy and intense mid-infrared emissions. • The mid-infrared emissions have high quantum efficiency. • The mid-infrared emissions have large stimulated emission cross sections. - Abstract: Novel Ga–Sb–S chalcogenide glasses doped with different amount of Dy{sup 3+} ions were prepared. Their thermal stability, optical properties, and mid-infrared (MIR) emission properties were investigated. The glasses show good thermal stability, excellent infrared transparency, very low phonon energy (∼306 cm{sup −1}), and intense emissions centered at 2.95, 3.59, 4.17 and 4.40 μm. Three Judd–Ofelt intensity parameters (Ω{sub 2} = 8.51 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 2.09 × 10{sup −20} cm{sup 2}, and Ω{sub 6} = 1.60 × 10{sup −20} cm{sup 2}) are obtained, and the related radiative transition properties are evaluated. The high quantum efficiencies and large stimulated emission cross sections of the MIR emissions (88.10% and 1.11 × 10{sup −20} cm{sup 2} for 2.95 μm emission, 75.90% and 0.38 × 10{sup −20} cm{sup 2} for 4.40 μm emission, respectively) in the Dy{sup 3+}-doped Ga–Sb–S glasses make them promising gain materials for the MIR lasers.

36 MATERIALS SCIENCE↗

Effects of titanium nanoparticles on self-cleaning and structural features of zinc-magnesium-phosphate glass

Graphical abstract: Water contact angle for sample S2, S3, S4 and S5. The water contact angle increased with increased the titanium NPs content (mol%). - Highlights: • ZnO–MgO–P{sub 2}O{sub 5} embedded TiO{sub 2} NPs prepared by conventional melt-quenching method. • The amorphous nature is confirmed by X-ray diffraction spectroscopy. • The structural characteristics of glasses is investigated using FTIR and Raman. • Wettability of the glasses surface by water contact angle. - Abstract: The loss of glass transparency on surface pollutants contamination unless inhibited not only causes vision obscurity but also responsible for major aesthetic damages of cultural heritage. It is due to the sticking of fine dirt particles on wetting layers, a complex process with several possible ramifications still to be clarified. We report the influence of titanium dioxide or titania (TiO{sub 2}) nanoparticles (NPs) on the structural and self-cleaning properties of zinc–magnesium–phosphate glasses. Following melt-quenching method glass samples of optimized composition (42 − x)P{sub 2}O{sub 5}–8MgO–50ZnO–xTiO{sub 2} with x = 0, 1, 2, 3 and 4 mol% are prepared. XRD patterns verified their amorphous nature and TEM images revealed the nucleation of TiO{sub 2} NPs of average diameter ≈4.05 ± 0.01 nm. Fourier transform infrared (FTIR) spectra displayed four absorption band centred at 1618–3438 cm{sup −1}, 902– 931 cm{sup −1}, 757–762 cm{sup −1} and 531–560 cm{sup −1}. Raman spectra exhibited four peaks each accompanied by a blue-shift. Water contact angle is found to increase with the increase of titanium NPs concentration into the amorphous matrix. This knowledge can be used to set up strategies and selective treatments to preventing glass transparency loss via the modification of self-cleaning attributes.

36 MATERIALS SCIENCE↗

Structural properties of ZnO:Al films produced by the sol–gel technique

ZnO:Al films are produced by sol–gel deposition at temperatures of 350–550°C, using different types of reagents. Atomic-force microscopy, X-ray diffraction analysis, Raman spectroscopy, and optical transmittance measurements are used to study the dependence of the structural, morphological, and optical properties of the ZnO:Al coatings on the conditions of deposition. The optical conditions for the production of ZnO:Al layers with preferred orientation in the [001] direction and distinguished by small surface roughness are established. The layers produced in the study possess optical transmittance at a level of up to 95% in a wide spectral range and can be used in optoelectronic devices.

36 MATERIALS SCIENCE↗