Nuclear Data Sheets for A = 97
The 1993 evaluation of A = 97 (1993Ar09) was updated using data available prior to Nov. 19, 2009.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The 1993 evaluation of A = 97 (1993Ar09) was updated using data available prior to Nov. 19, 2009.
Cross sections for radiative capture of neutrons have been measured for stable isotopes of Ru with mass numbers 96,102, and 104. From separate irradiations using thermal and epithermal neutrons, independent values for the thermal cross section and effective resonance integral have been determined. Spectroscopic studies of the gamma rays emitted in the decays of {sup 97,103,105}Ru have enabled improvements in the precision of the energies and intensities of the radiations along with corresponding improvements in the beta-decay feeding intensities and the energies of the levels in the respective daughter nuclei. Similar spectroscopic measurements of the decays of {sup 105}Rh (daughter of {sup 105}Ru) and {sup 96}Tc (produced from n,p reactions on {sup 96}Ru) have resulted in improved gamma-ray energies and intensities in those decays.
This study demonstrates a new method of radioisotope labeling of ultra-high molecular weight polyethylene inserts in prosthetic joints for wear studies. The radioisotopes {sup 97}Ru, {sup 100}Pd, {sup 100}Rh, and {sup 101m}Rh are produced in fusion evaporation reactions induced by {sup 12}C ions in a {sup 92}Zr target foil. The fusion products recoil-implant into ultra-high molecular weight polyethylene plugs, machined to fit into the surface of the inserts. During laboratory simulations of the joint motion, a wear rate of the labeled polyethylene may be measured and the pathways of wear debris particles can be traced by detecting characteristic gamma-rays. The concentration profiles of the radioisotopes extend effectively uniformly from the polyethylene surface to a depth of about 4 {mu}m. The multiplicity of labeling and the use of several gamma-ray lines aids with avoiding systematic measurement uncertainties. Two polyethylene plugs were labeled and one was fitted into the surface of the tibial insert of a knee prosthesis, which had been worn in. Actuation over close to 100,000 cycles with a 900 N axial load and a 24 deg. flexion angle removed (14{+-}1)% of the gamma-ray activity from the plug. Most of this activity dispersed into the serum lubricant identifying this as the important debris pathway. Less than 1% activity was transferred to the femoral component of the prosthesis and the measured activity on the tibial tray was insignificant. Assuming uniform wear across the superior surface of the insert, a wear rate of (12{+-}3) mm{sup 3}/Megacycle was determined. This is consistent with wear rate measurements under similar conditions using other techniques.
We have measured the half-life of the electron-capture (ec) decay of {sup 97}Ru in a metallic environment, both at low temperature (19 K), and also at room temperature. We find the half-lives at both temperatures to be the same within 0.1%. This demonstrates that a recent claim that the ec decay half-life for {sup 7}Be changes by 0.9%{+-}0.2% under similar circumstances certainly cannot be generalized to other ec decays. Our results for the half-life of {sup 97}Ru, 2.8370(14) d at room temperature and 2.8382(14) d at 19 K, are consistent with, but much more precise than, previous room-temperature measurements. In addition, we have also measured the half-lives of the {beta}{sup -}-emitters {sup 103}Ru and {sup 105}Rh at both temperatures, and found them also to be unchanged.
The {sup 92}Mo({alpha},n){sup 95}Ru, {sup 94}Mo({alpha},n){sup 97}Ru, and {sup 112}Sn({alpha},{gamma}){sup 116}Te cross sections were measured at the upper end of the p-process Gamow window between 8.2 and 11.1 MeV. Our results are slightly lower than global Hauser-Feshbach calculations from the code NON-SMOKER, but still within the uncertainty of the prediction. The {sup 112}Sn({alpha},{gamma}){sup 116}Te cross section agrees well with a recently measured thick-target cross section in the same energy range. For the {sup 92,94}Mo({alpha},n) reactions the present data close to the reaction thresholds could eliminate previous uncertainties within a factor of 20, and we can present now useful comparisons to statistical model calculations with different optical potentials.
Cross sections for (n,2n) (n,p) (n,{alpha}), and (n,d*){sup 1} reactions have been measured on ruthenium isotopes at the neutron energies of 13.5 to 14.8 MeV using the activation technique in combination with high-resolution gamma-ray spectroscopy. Data are reported for the following reactions: {sup 104}Ru(n,2n){sup 103}Ru, {sup 98}Ru(n,2n){sup 97}Ru, {sup 96}Ru(n,2n){sup 95}Ru, {sup 96}Ru(n,p){sup 96}Tc{sup g}, {sup 96}Ru(n,p){sup 96}Tc{sup m}, {sup 104}Ru(n,p){sup 104}Tc, {sup 102}Ru(n,p){sup 102}Tc{sup m}, {sup 104}Ru(n,{alpha}){sup 101}Mo, {sup 102}Ru(n,{alpha}){sup 99}Mo, {sup 96}Ru(n,{alpha}){sup 93}Mo{sup m}, and {sup 96}Ru(n,d*){sup 95}Tc{sup m}. Results were discussed and compared with the previous works.
Fundamental knowledge on the energetics at the interface between a water layer and a metal catalyst is essential so as to understand the roles that water can play in the synthesis, activation and regeneration of noble metal-based catalysts. Here, we report the direct measurement of the enthalpy of water adsorption (Δh ads ) on activated carbon (C) and activated C-supported Ru nanoparticles, which are promising catalyst as applied to the hydrogenation/hydrodeoxygenation (HDO) of oxygenates (phenolics, aldehydes, etc.). Specifically, the near-zero coverage enthalpy of water adsorption on a C-supported Ru catalyst is -75.3 ± 0.4 kJ/(mol water), suggesting favorable water–metal binding. This is much more exothermic than that on C, which has an enthalpy of adsorption of -50.3 ± 1.3 kJ/(mol water). Despite the favorable initial binding, the magnitudes of enthalpies of water condensation on C and Ru-C indicate that overall, their surfaces are both hydrophobic. Moreover, the experimentally-measured near-zero coverage water adsorption enthalpy at the Ru sites is in very good agreement with our density functional theory based calculations. At low coverages, we obtain a water binding energy of -61.7 kJ/(mol water), which increases to -78.1 kJ/(mol water) at saturation. Complementary results are also obtained from a thermal analysis, which employed a thermogravimetric analysis–differential scanning calorimetry–mass spectrometry (TG-DSC-MS), a spectroscopic investigation using ex situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and a morphological evaluation with transmission electron microscopy (TEM). We point out that in carbon-supported metal catalysts, such as Ru-C, a strong hydration at near-zero coverage and relative weak water-surface interactions occurs upon saturation. Such heterogeneity is essential and crucial for catalytic hydrogenation/HDO reactions that involve balanced interactions among the water-rich reactant mixture and nonpolar organic products.
Two isotopically-characterized targets of high-purity (99.84±0.03%) 235 U-oxide and a neutron dosimetry package were exposed to a pulsed neutron irradiation using the Godiva critical assembly at the National Criticality Experiments Research Center. Following irradiation, the fissioned targets were counted with a broad-energy germanium detector. Estimates of the total fissions for each target were made using measurements of well-known fission products. The total fission values were then used to measure the fission yields of 21 fission products with half-lives between 636 and 119,700 seconds. Mean values of seventeen of the measured fission products fell within the 95% confidence level of the Evaluated Nuclear Data Files VII.1/b (ENDF/B-VII.1) using the larger of the two uncertainties: 84g Br, 89 Rb, 91 Sr, 93 Y, 97 Zr, 101 Mo, 105 Ru, 128 Sn, 129 Sb, 130g Sb, 131 Sb, 131m Te, 133 I, 135 I, 141 Ba, 142 Ba, and 142 La. Seven isotopes were measured to better precision than is listed in the ENDF/B-VII.1 database: 89 Rb, 93 Y, 128 Sn, 129 Sb, 130g Sb, 131m Te, and 133 I. Four of the measured isotopes were found to be statistically different from the ENDF/B-VII.1 database: 94 Y, 134 Te, 134 I, and 138 Xe. Two of the isotopic analyses conducted in this paper fit the parent and daughter data simultaneously. The parent-daughter pairs measured in this way were the 134 Te/I and 142 Ba/La pairs. The fission yield results obtained in this way are unique, especially for 134 I, because the parent and daughter half-lives are so close. Here, given the limited number of direct measurements of the 134 Te/I pair from fast neutron induced fission and the seemingly high estimate for 134 Te from previous work, it is likely that the value in this paper is more accurate; however, additional measurements of this pair are needed to validate this assertion.
Kinetic and isotopic assessments combined with theoretical calculations shed light on the mechanistic differences in terms of the number of hydrogen addition steps and the electronic charges of reactive hydrogen in the catalytic sequence leading to the Ar−OCH 3 scission of 2-methoxyphenol occurring at various interfaces of vapor−Ru, cyclohexane−Ru, and water−Ru. At vapor−Ru and cyclohexane−Ru interfaces, the initial hydrogen adatom (H*) additions on the phenyl ring disrupt its aromaticity, as a step required to occur before kinetically relevant Ar−OCH 3 scission on an ensemble of Ru sites. The number of H* addition events prerequisite to the formation of the kinetically relevant Ar−OCH 3 scission transition state, however, is larger at the cyclohexane−Ru interface than those at the vapor−Ru and water−Ru interfaces. The preferential solvation of 2-methoxyphenol derived reaction precursors and H* weakens their adsorption on Ru sites, which leads to a decrease in the activation barrier for the third H* addition step and in turn a larger number of H* additions. At the water−Ru interface, water as a polar protic solvent promotes the Ar−OCH 3 scission by enabling a mechanistically distinct catalytic route an adjacent water molecule from the solvent layer assists with the intramolecular proton shuttling from the hydroxyl group (−OH) to the vicinal methoxy group (−OCH 3 ) of 2-methoxyphenol, evolving a highly charged transition state that is further stabilized by the water solvent layer, thereby leading to Ar−OCH 3 scission rate constants that are much higher than those at the vapor−Ru interface and, when comparing at the same H 2 chemical potential, higher Ar−OCH 3 scission turnovers. Furthermore, these distinct mechanistic details of the Ar−OCH 3 scission at various reaction interfaces, inferred from experiment and theory, illustrate how a solvent either solvates reaction intermediates and transition states or directly participates in the formation of kinetically relevant transition states, leading to changes in the free energy landscape, thus rewriting the catalytic fates in hydrodeoxygenation reactions.
We present a density-functional theory based kinetic Monte Carlo study of CO oxidation at the (111) facet of RuO{sub 2}. We compare the detailed insight into elementary processes, steady-state surface coverages, and catalytic activity to equivalent published simulation data for the frequently studied RuO{sub 2}(110) facet. Qualitative differences are identified in virtually every aspect ranging from binding energetics over lateral interactions to the interplay of elementary processes at the different active sites. Nevertheless, particularly at technologically relevant elevated temperatures, near-ambient pressures and near-stoichiometric feeds both facets exhibit almost identical catalytic activity. These findings challenge the traditional definition of structure sensitivity based on macroscopically observable turnover frequencies and prompt scrutiny of the applicability of structure sensitivity classifications developed for metals to oxide catalysis.
The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. Although density functional theory is widely used in the computational chemistry community, the most popular density functional, B3LYP, has some serious shortcomings: (i) it is better for main-group chemistry than for transition metals; (ii) it systematically underestimates reaction barrier heights; (iii) it is inaccurate for interactions dominated by mediumrange correlation energy, such as van der Waals attraction, aromatic-aromatic stacking, and alkane isomerization energies. We have developed a variety of databases for testing and designing new density functionals. We used these data to design new density functionals, called M06-class (and, earlier, M05-class) functionals, for which we enforced some fundamental exact constraints such as the uniform-electron-gas limit and the absence of self-correlation energy. Our M06-class functionals depend on spin-up and spin-down electron densities (i.e., spin densities), spin density gradients, spin kinetic energy densities, and, for nonlocal (also called hybrid) functionals, Hartree-Fock exchange. We have developed four new functionals that overcome the above-mentioned difficulties: (a) M06, a hybrid meta functional, is a functional with good accuracy “across-theboard” for transition metals, main group thermochemistry, medium-range correlation energy, and barrier heights; (b) M06- 2X, another hybrid meta functional, is not good for transition metals but has excellent performance for main group chemistry, predicts accurate valence and Rydberg electronic excitation energies, and is an excellent functional for aromatic-aromatic stacking interactions; (c) M06-L is not as accurate as M06 for barrier heights but is the most accurate functional for transition metals and is the only local functional (no Hartree-Fock exchange) with better across-the-board average performance than B3LYP; this is very important because only local functionals are affordable for many demanding applications on very large systems; (d) M06-HF has good performance for valence, Rydberg, and charge transfer excited states with minimal sacrifice of ground-state accuracy. In this Account, we compared the performance of the M06-class functionals and one M05-class functional (M05-2X) to that of some popular functionals for diverse databases and their performance on several difficult cases. The tests include barrier heights, conformational energy, and the trend in bond dissociation energies of Grubbs’ ruthenium catalysts for olefin metathesis. Based on these tests, we recommend (1) the M06-2X, BMK, and M05-2X functionals for main-group thermochemistry and kinetics, (2) M06-2X and M06 for systems where main-group thermochemistry, kinetics, and noncovalent interactions are all important, (3) M06-L and M06 for transition metal thermochemistry, (4) M06 for problems involving multireference rearrangements or reactions where both organic and transition-metal bonds are formed or broken, (5) M06-2X, M05-2X, M06-HF, M06, and M06-L for the study of noncovalent interactions, (6) M06-HF when the use of full Hartree-Fock exchange is important, for example, to avoid the error of self-interaction at longrange, (7) M06-L when a local functional is required, because a local functional has much lower cost for large systems.