Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RUTHENIUM 92”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 92

Nuclear structure and decay data pertaining to all nuclides with mass number A = 92 (As, Se, Br, Kr, Rb, Sr, Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd) have been compiled and evaluated, and incorporated into the ENSDF data file. All literature available by 15 September 2012 has been considered. This evaluation supersedes the previous publication for this mass chain (Coral M. Baglin, Nuclear Data Sheets 91, 423 (2000) (November 2000 cutoff date)), and subsequent unpublished reevaluations by C.M. Baglin for {sup 92}Kr (January 2004 literature cut-off) and {sup 92}Sr (August 2003 literature cut-off).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mass measurements in the vicinity of the r p-process and the {nu} p-process paths with the Penning trap facilities JYFLTRAP and SHIPTRAP

The masses of very neutron-deficient nuclides close to the astrophysical r p- and {nu} p-process paths have been determined with the Penning trap facilities JYFLTRAP at JYFL/Jyvaeskylae and SHIPTRAP at GSI/Darmstadt. Isotopes from yttrium (Z=39) to palladium (Z=46) have been produced in heavy-ion fusion-evaporation reactions. In total, 21 nuclides were studied, and almost half of the mass values were experimentally determined for the first time: {sup 88}Tc, {sup 90-92}Ru, {sup 92-94}Rh, and {sup 94,95}Pd. For the {sup 95}Pd{sup m}, (21/2{sup +}) high-spin state, a first direct mass determination was performed. Relative mass uncertainties of typically {delta}m/m=5x10{sup -8} were obtained. The impact of the new mass values has been studied in {nu} p-process nucleosynthesis calculations. The resulting reaction flow and the final abundances are compared with those obtained with the data of the Atomic Mass Evaluation 2003.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Role of thermal and photobeta decays in processes of nucleosynthesis of problematic p nuclei of {sup 113}In, {sup 115}Sn, {sup 92},{sup 94}Mo, and {sup 96},{sup 98}Ru in massive stars

The temperature dependence of the rates of {sup 113}Cd {yields}{sup 113}In, {sup 115}In {yields}{sup 115}Sn, {sup 92}Zr{yields}{sup 92}Nb {yields}{sup 92}Mo, {sup 94}Zr{yields}{sup 94}Nb {yields}{sup 94}Mo, {sup 96}Mo {yields}{sup 96}Tc{yields}{sup 96}Ru, and {sup 98}Mo{yields}{sup 98}Tc{yields}{sup 98}Ru thermal beta transitions was studied at temperatures of massive-star matter in the range of 1 Multiplication-Sign 10{sup 8}-6 Multiplication-Sign 10{sup 9} K. These decays are the possible channel of synthesis of the p nuclei of {sup 113}In, {sup 115}Sn, {sup 92},{sup 94}Mo, and {sup 96},{sup 98}Ru. The abundances of these nuclei present a challenge for models that study the explosivemechanism of synthesis. The contribution of photobeta decay to the synthesis of the aforementioned p nuclei was estimated. It was shown that the channel of thermal beta decay for {sup 113}In, {sup 115}Sn, {sup 94}Mo, and {sup 98}Ru p nuclei and the channel of photobeta decay for the {sup 96}Mo p nucleus could be efficient at the high-temperature quasiequilibrium stage of massive-star evolution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Recoil-Implantation Of Multiple Radioisotopes Towards Wear Rate Measurements And Particle Tracing In Prosthetic Joints

This study demonstrates a new method of radioisotope labeling of ultra-high molecular weight polyethylene inserts in prosthetic joints for wear studies. The radioisotopes {sup 97}Ru, {sup 100}Pd, {sup 100}Rh, and {sup 101m}Rh are produced in fusion evaporation reactions induced by {sup 12}C ions in a {sup 92}Zr target foil. The fusion products recoil-implant into ultra-high molecular weight polyethylene plugs, machined to fit into the surface of the inserts. During laboratory simulations of the joint motion, a wear rate of the labeled polyethylene may be measured and the pathways of wear debris particles can be traced by detecting characteristic gamma-rays. The concentration profiles of the radioisotopes extend effectively uniformly from the polyethylene surface to a depth of about 4 {mu}m. The multiplicity of labeling and the use of several gamma-ray lines aids with avoiding systematic measurement uncertainties. Two polyethylene plugs were labeled and one was fitted into the surface of the tibial insert of a knee prosthesis, which had been worn in. Actuation over close to 100,000 cycles with a 900 N axial load and a 24 deg. flexion angle removed (14{+-}1)% of the gamma-ray activity from the plug. Most of this activity dispersed into the serum lubricant identifying this as the important debris pathway. Less than 1% activity was transferred to the femoral component of the prosthesis and the measured activity on the tibial tray was insignificant. Assuming uniform wear across the superior surface of the insert, a wear rate of (12{+-}3) mm{sup 3}/Megacycle was determined. This is consistent with wear rate measurements under similar conditions using other techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Complementary optical-potential analysis of {alpha}-particle elastic scattering and induced reactions at low energies

A previously derived semi-microscopic analysis based on the Double Folding Model, for {alpha}-particle elastic scattering on A{approx}100 nuclei at energies below 32 MeV, is extended to medium mass A{approx}50-120 nuclei and energies from {approx}13 to 50 MeV. The energy-dependent phenomenological imaginary part for this semi-microscopic optical model potential was obtained including the dispersive correction to the microscopic real potential, and used within a concurrent phenomenological analysis of the same data basis. A regional parameter set for low-energy {alpha}-particles entirely based on elastic scattering data analysis was also obtained for nuclei within the above mentioned mass and energy ranges. Then, an ultimate assessment of ({alpha},{gamma}), ({alpha},n), and ({alpha},p) reaction cross sections considered target nuclei from {sup 45}Sc to {sup 118}Sn and incident energies below {approx}12 MeV. The former diffuseness of the real part of optical potential as well as the surface imaginary potential depth have been found to be responsible for the actual difficulties in the description of these data, and modified in order to obtain an optical potential which describes equally well both the low-energy elastic scattering and induced reaction data for {alpha}-particles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Optically Pure C 1 -Symmetric Cyclic(alkyl)(amino)carbene Ruthenium Complexes for Asymmetric Olefin Metathesis

An expedient access to the first optically pure ruthenium complexes containing C 1 -symmetric cyclic (alkyl)(amino)carbene (CAAC) ligands is reported. Furthermore, they demonstrate excellent catalytic performances in asymmetric olefin metathesis with high enantioselectivities (up to 92% ee). Preliminary mechanistic insights provided by DFT models highlight the origin of the enantioselectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The alpha-cluster model applied to {sup 96}Ru

The states of {sup 96}Ru are investigated in terms of the a alpha+ core structure. The ground state band of the alpha+{sup 92}Mo system is obtained through a local cluster-core potential which includes a fixed set of parameters employed in other mass regions. The calculated spectrum gives a good general description of the experimental {sup 96}Ru levels. The reduced alpha-widths, B(E2) transition rates and rms intercluster separations are determined for the members of the ground state band. The results show that the model can reproduce the order of magnitude of the experimental B(E2) values without the use of effective charges and indicate that the first members of the ground state band present a stronger alpha-cluster character. Predictions concerning a negative parity band of the alpha+{sup 92}Mo system are also shown.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nucleosynthesis in neutrino-driven, aspherical supernova explosion of a massive star

We examine explosive nucleosynthesis of p-nuclei during a delayed neutrino-driven, aspherical supernova explosion aided by standing accretion shock instability, based on two-dimensional hydrodynamic simulations of the explosion of a 15M{sub {center_dot}} star. We find that p-nuclei are mainly produced through {gamma}-processes, and that the nuclei lighter than {sup 92}Mo are abundantly synthesized in slightly neutron-rich bubbles with electron fractions of Y{sub e}{<=}0.48. {sup 94}Mo, {sup 96}Ru, and {sup 98}Ru, are underproduced compared with the solar system, as in the spherical model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 116

This evaluation for A = 116 updates one by J. Blachot, (2001Bl07) published in Nuclear Data Sheets 92, 455 (2001)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Defense Waste Processing Facility Nitric-Glycolic Flowsheet Chemical Process Cell Chemistry: Part 2

The conversions of nitrite to nitrate, the destruction of glycolate, and the conversion of glycolate to formate and oxalate were modeled for the Nitric-Glycolic flowsheet using data from Chemical Process Cell (CPC) simulant runs conducted by Savannah River National Laboratory (SRNL) from 2011 to 2016. The goal of this work was to develop empirical correlation models to predict these values from measurable variables from the chemical process so that these quantities could be predicted a-priori from the sludge or simulant composition and measurable processing variables. The need for these predictions arises from the need to predict the REDuction/OXidation (REDOX) state of the glass from the Defense Waste Processing Facility (DWPF) melter. This report summarizes the work on these correlations based on the aforementioned data. Previous work on these correlations was documented in a technical report covering data from 2011-2015. This current report supersedes this previous report. Further refinement of the models as additional data are collected is recommended. The glass REDOX depends on the concentrations of nitrate and manganese (oxidants), and of glycolate, formate, oxalate, carbon, and antifoam (reductants) in the melter feed. The waste sludge contains nitrite, nitrate, manganese (Mn), and oxalate. Virtually all of the nitrite is converted to nitrate or NO+NO 2 +N 2 O gases in the CPC. The portion of the nitrite converted to nitrate increases the amount of nitrate in the sludge. The amount of glycolate in the final melter feed depends on the amount of the glycolic acid feed that is destroyed. Similarly, the amounts of formate and oxalate formed during the decomposition of glycolic acid are required. The material balance on carbon was found to not close in most cases. Generally, there was less carbon at the end of testing compared to the inputs. The most uncertain product variable was glycolate, so material balances were performed where the glycolate concentration was adjusted, usually upward, to close the balance. Correlation versus the original, as-measured, data was generally poor, but correlation against the material balance adjusted values was greatly improved. It was also shown that the correlation of the measured REDOX versus the predicted REDOX was much better when the material balance adjusted glycolate values were used. Three data series were primarily used during the regressions of the data; these series were 1) Sludge Batch 9 NG flowsheet simulant runs NG51-62 (SB9-NG); 2) Scaled Runs + Bounding Hydrogen Runs (SR+BH); and 3) Runs GN43-50 and 57 (43-50,57). The glycolate destruction was found to correlate with acid stoichiometry (AS), percent reducing acid (PRA), and for some data series, headspace to simulant volume ratio (HSV), mercury (Hg), and nitrate. Although glycolate destruction for pairs of data series (e.g., [SB9-NG] and [SR+BH]) were found to depend on HSV, the combination of all three data series was not found to have significant dependence on this variable. The best model for glycolate destruction depended on AS, nitrate, and Hg. This model predicted the product glycolate compositions of the data to within 92-106%. The conversion of glycolate to formate was high when noble metals and Hg were not present, with values up to 100%. When noble metals and Hg were present, this conversion ranged from zero to 7%, and was dependent on AS. Lower AS gave higher conversions to formate. The conversion to oxalate was found to depend on the AS and the initial concentration of nitrite. An alternative fit versus AS and the form of ruthenium (Ru) used is a possible alternative. This fit was somewhat less statistically significant. This second model predicts that more oxalate is formed when Ru-nitrosyl nitrate is used rather than Ru chloride. The conversion of glycolate to oxalate ranged from zero to 6%. The conversion of nitrite to nitrate depended primarily on AS and PRA, with HSV and Hg being significant when these variables were varied. For multiple series of data, nitrite was also needed to SRNL-STI-2017-00172 5HYLVLRQ viL distinguish between data series, and the effect of HSV became insignificant. The best model for nitrite to nitrate conversion depended on AS, PRA, nitrite, and Hg. The 95% confidence intervals on the predicted values of glycolate destruction, glycolate to oxalate conversion, and nitrite to nitrate conversion were used to determine the uncertainty in the predicted REDOX when starting with only the composition of the sludge, AS, and PRA. Using the 95% confidences on an individual value (that is the confidence in getting a particular value for one single test as opposed to what the mean would be for multiple tests), the uncertainty in the predicted REDOX was calculated. The uncertainty in the actual product composition glycolate, oxalate, formate, and nitrate concentrations translated to an uncertainty in the REDOX value of ±0.1,which is approximately the uncertainty claimed in the REDOX model itself.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Plaque Brachytherapy for Uveal Melanoma: A Vision Prognostication Model

Purpose: To generate a vision prognostication model after plaque brachytherapy for uveal melanoma. Methods and Materials: All patients with primary single ciliary body or choroidal melanoma treated with iodine-125 or ruthenium-106 plaque brachytherapy between January 1, 2005, and June 30, 2010, were included. The primary endpoint was loss of visual acuity. Only patients with initial visual acuity better than or equal to 20/50 were used to evaluate visual acuity worse than 20/50 at the end of the study, and only patients with initial visual acuity better than or equal to 20/200 were used to evaluate visual acuity worse than 20/200 at the end of the study. Factors analyzed were sex, age, cataracts, diabetes, tumor size (basal dimension and apical height), tumor location, and radiation dose to the tumor apex, fovea, and optic disc. Univariate and multivariable Cox proportional hazards were used to determine the influence of baseline patient factors on vision loss. Kaplan-Meier curves (log rank analysis) were used to estimate freedom from vision loss. Results: Of 189 patients, 92% (174) were alive as of February 1, 2011. At presentation, visual acuity was better than or equal to 20/50 and better than or equal to 20/200 in 108 and 173 patients, respectively. Of these patients, 44.4% (48) had post-treatment visual acuity of worse than 20/50 and 25.4% (44) had post-treatment visual acuity worse than 20/200. By multivariable analysis, increased age (hazard ratio [HR] of 1.01 [1.00-1.03], P=.05), increase in tumor height (HR of 1.35 [1.22-1.48], P<.001), and a greater total dose to the fovea (HR of 1.01 [1.00-1.01], P<.001) were predictive of vision loss. This information was used to develop a nomogram predictive of vision loss. Conclusions: By providing a means to predict vision loss at 3 years after treatment, our vision prognostication model can be an important tool for patient selection and treatment counseling.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Nuclear matrix elements from direct lifetime or cross-section measurements

The method of simultaneous lifetime and g factor measurements using a plunger device and the RDDS and TDRIV techniques is introduced. Results on lifetimes and hyperfine-interaction parameters for 2{sup +}{sub 1} states in {sup 104-108}Pd, {sup 96,98,104}Ru, and {sup 92,94}Zr, using a plunger device. Another method to obtain electromagnetic matrix elements is direct cross section measurements using NRF. The method is outlined, and some recent results on {sup 76}Se are shown.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TYPE Ia SUPERNOVAE AS SITES OF THE p-PROCESS: TWO-DIMENSIONAL MODELS COUPLED TO NUCLEOSYNTHESIS

Beyond Fe, there is a class of 35 proton-rich nuclides, between {sup 74}Se and {sup 196}Hg, called p-nuclei. They are bypassed by the s and r neutron capture processes and are typically 10-1000 times less abundant than the s- and/or r-isotopes in the solar system. The bulk of p-isotopes is created in the 'gamma processes' by sequences of photodisintegrations and beta decays in explosive conditions in both core collapse supernovae (SNe II) and in Type Ia supernovae (SNe Ia). SNe II contribute to the production of p-nuclei through explosive neon and oxygen burning. However, the major problem in SN II ejecta is a general underproduction of the light p-nuclei for A < 120. We explore SNe Ia as p-process sites in the framework of a two-dimensional SN Ia delayed detonation model as well as pure deflagration models. The white dwarf precursor is assumed to have reached the Chandrasekhar mass in a binary system by mass accretion from a giant/main-sequence companion. We use enhanced s-seed distributions, with seeds directly obtained from a sequence of thermal pulse instabilities both in the asymptotic giant branch phase and in the accreted material. We apply the tracer-particle method to reconstruct the nucleosynthesis by the thermal histories of Lagrangian particles, passively advected in the hydrodynamic calculations. For each particle, we follow the explosive nucleosynthesis with a detailed nuclear reaction network for all isotopes up to {sup 209}Bi. We select tracers within the typical temperature range for p-process production, (1.5-3.7) x 10{sup 9} K, and analyze in detail their behavior, exploring the influence of different s-process distributions on the p-process nucleosynthesis. In addition, we discuss the sensitivity of p-process production to parameters of the explosion mechanism, taking into account the consequences on Fe and alpha elements. We find that SNe Ia can produce a large amount of p-nuclei, both the light p-nuclei below A = 120 and the heavy-p nuclei, at quite flat average production factors, tightly related to the s-process seed distribution. For the first time, we find a stellar source able to produce both light and heavy p-nuclei almost at the same level as {sup 56}Fe, including the debated neutron magic {sup 92,} {sup 94}Mo and {sup 96,} {sup 98}Ru. We also find that there is an important contribution from the p-process nucleosynthesis to the s-only nuclei {sup 80}Kr, {sup 86}Sr, to the neutron magic {sup 90}Zr, and to the neutron-rich {sup 96}Zr. Finally, we investigate the metallicity effect on p-process production in our models. Starting with different s-process seed distributions for two metallicities Z = 0.02 and Z = 0.001, running two-dimensional SN Ia models with different initial composition, we estimate that SNe Ia can contribute to at least 50% of the solar p-process composition. A more detailed analysis of the role of SNe Ia in Galactic chemical evolution of p-nuclei is in preparation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗