Nuclear Data Sheets for A = 111
This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This evaluation for A = 111 updates one by J. Blachot, (2003Bl10), published in Nuclear Data Sheets 100, 179 (2003)
Analysis of high statistics triple coincidence fission γ data from {sup 252}Cf at Gammasphere including angular correlations yielded well-expanded high-spin level schemes with more complete and reliable spin/parity assignments for {sup 82}Ge, {sup 118,120,122}Cd and {sup 114,115}Rh. Both the quasi-particle/hole couplings and quasi-rotational degrees of freedom are implied to play roles in these Cd isotopes. Evidence for triaxial shapes and octupole components in the Cd isotopes is presented. These Cd isotopes may have triaxial deformations. High-spin level schemes of {sup 114,115}Rh have been established for the first time. The existence of a relatively large signature splitting and an yrare band shows typical features of a triaxially deformed nucleus. Possible excited deformed rotational bands are observed, for the first time, in {sup 82}Ge. From the multipole mixing ratio measurement, the ground state configurations of {sup 109,111}Ru, as well as excited states in {sup 103,107}Mo and {sup 111}Ru were determined.
The multipole mixing ratios of {delta}I=1 transitions between levels in rotational bands built on single-particle states in odd neutron nuclei are dependent on the configurations of the states. In particular, the mixing ratio can be used to distinguish between several possible single-particle configurations if interpreted with the particle-axial-rotor model. This work features the first determination of the ground-state configurations of {sup 109,111}Ru. The single-particle structures of the ground states of {sup 101}Zr and {sup 103,105,107}Mo as well as excited states in {sup 103,107}Mo are also investigated, with a new result found in {sup 107}Mo.
The interaction of the dye molecule, N3 (cis-bis(isothiocyanato)bis(2,2{sup '}-bipyridyl-4,4{sup '}-dicarboxylato) -ruthenium(II)), and related ligand molecules with a Au(111) surface has been studied using synchrotron radiation-based electron spectroscopy. Resonant photoemission spectroscopy (RPES) and autoionization of the adsorbed molecules have been used to probe the coupling between the molecules and the substrate. Evidence of charge transfer from the states near the Fermi level of the gold substrate into the lowest unoccupied molecular orbital (LUMO) of the molecules is found in the monolayer RPES spectra of both isonicotinic acid and bi-isonicotinic acid (a ligand of N3), but not for the N3 molecule itself. Calibrated x-ray absorption spectroscopy and valence band spectra of the monolayers reveals that the LUMO crosses the Fermi level of the surface in all cases, showing that charge transfer is energetically possible both from and to the molecule. A core-hole clock analysis of the resonant photoemission reveals a charge transfer time of around 4 fs from the LUMO of the N3 dye molecule to the surface. The lack of charge transfer in the opposite direction is understood in terms of the lack of spatial overlap between the {pi}*-orbitals in the aromatic rings of the bi-isonicotinic acid ligands of N3 and the gold surface.
Electrochemical Stern layers are observed on the surfaces of RuO 2 single crystals in 0.1 M CsF electrolyte. The Stern layers formed at the interfaces of RuO 2 (110) and (100) are compared to the previously reported Stern layer on Pt (111) [Liu et al., J. Phys. Chem. Lett., 9 (2018) 1265]. While the Cs + density profiles at the potentials close to hydrogen evolution reactions are similar, the hydration layers intervening the surface and the Cs + layer are significantly denser on RuO 2 surfaces than that on Pt(111) surface, reflecting the oxygen termination of RuO 2 surfaces. The overall similarities between Stern layers on ruthenium surfaces and platinum surface suggest the universal presence of Stern layers in all well-defined solid-electrolyte interfaces.
We have studied (001) surface terminated cerium oxide nanoparticles grown on a ruthenium substrate using physical vapor deposition. Their morphology, shape, crystal structure, and chemical state are determined by low-energy electron microscopy and micro-diffraction, scanning probe microscopy, and synchrotron-based X-ray absorption spectroscopy. Square islands are identified as CeO 2 nanocrystals exhibiting a (001) oriented top facet of varying size; they have a height of about 7 to 10 nm and a side length between about 50 and 500 nm, and are terminated with a p(2 × 2) surface reconstruction. Micro-illumination electron diffraction reveals the existence of a coincidence lattice at the interface to the ruthenium substrate. The orientation of the side facets of the rod-like particles is identified as (111); the square particles are most likely of cuboidal shape, exhibiting (100) oriented side facets. Lastly, the square and needle-like islands are predominantly found at step bunches and may be grown exclusively at temperatures exceeding 1000 °C.
Column chromatographic methods have been developed to separate no-carrier-added 111 Ag from proton irradiated thorium targets and associated fission products as an ancillary process to an existing 225 Ac separation design. In this paper, we report the separation of 111 Ag both prior and subsequent to 225 Ac recovery using CL resin, a solvent impregnated resin (SIR) that carries an organic solution of alkyl phosphine sulfides (R 3 P = S) and alkyl phosphine oxides (R 3 P = O). The recovery yield of 111 Ag was 93 ± 9% with a radiochemical purity of 99.9% (prior) and 87 ± 9% with a radiochemical purity of 99.9% (subsequent to) 225 Ac recovery. Both processes were successfully performed with insignificant impacts on 225 Ac yields or quality. Measured equilibrium distribution coefficients for silver and ruthenium (a residual contaminant) on CL resin in hydrochloric and nitric acid media are reported, to the best of our knowledge, for the first time. Finally and additionally, measured cross sections for the production of 111 Ag and 110m Ag for the 232 Th(p,f) 110m,111 Ag reactions are reported within.
We have analyzed the low-temperature thermodynamic properties of spin ice in the staggered and direct (acting along the [111] axis) fields for rare-earth oxides with the chalcolamprite structure and general formula Re{sub 2}{sup 3+}Me{sub 2}{sup 4+}O{sub 7}{sup 2-}. Calculations have been performed in the cluster approximation. The results have been compared with experimental temperature dependences of heat capacity and entropy for Dy{sub 2}Ti{sub 2}O{sub 7} compound for different values of the external field in the [111] direction. The experimental data and calculated results have also been compared for the Pr{sub 2}Ru{sub 2}O{sub 7} compound with the antiferromagnetic ordering of magnetic moments of ruthenium ions, which gives rise to the staggered field acting on the system of rare-earth ions. The calculated temperature dependences of heat capacity and entropy are in good agreement with experimental data.
Rutile RuO 2 is known to exhibit high catalytic activity for the oxygen evolution reaction (OER) and large pseudocapacitance associated with redox of surface Ru, however the mechanistic link between these properties and the role of pH is yet to be understood. Here we report that the OER activities of the (101), (001) and (111) RuO 2 surfaces were found to increase while the potential of a pseudocapacitive feature just prior to OER shifted to lower potentials (“super-Nernstian” shift) with increasing pH on the reversible hydrogen electrode (RHE) scale. This behavior is in contrast to the (100) and (110) surfaces that have pH-independent Ru redox and OER activity. The link in catalytic and pseudocapacitive behavior illustrates the importance of this redox feature in generating active sites, building new mechanistic understanding of the OER.
First-principles kinetic Monte Carlo (1p-kMC) simulations for CO oxidation on two RuO 2 facets, RuO 2 (110) and RuO 2 (111), were coupled to the computational fluid dynamics (CFD) simulations package MFIX, and reactor-scale simulations were then performed. 1p-kMC coupled with CFD has recently been shown as a feasible method for translating molecular scale mechanistic knowledge to the reactor scale, enabling comparisons to in situ and online experimental measurements. Only a few studies with such coupling have been published. This work incorporates multiple catalytic surface facets into the scale-coupled simulation, and three possibilities were investigated: the two possibilities of each facet individually being the dominant phase in the reactor, and also the possibility that both facets were present on the catalyst particles in the ratio predicted by an ab initio thermodynamics-based Wulff construction. When lateral interactions between adsorbates were included in the 1p-kMC simulations, the two surfaces, RuO 2 (110) and RuO 2 (111), were found to be of similar order-of-magnitude in activity for the pressure range of 1 × 10 –4 bar to 1 bar, with the RuO 2 (110) surface-termination showing more simulated activity than the RuO 2 (111) surface-termination. Coupling between the 1p-kMC and CFD was achieved with a lookup table generated by the error-based modified Shepard interpolation scheme. Isothermal reactor scale simulations were performed and compared to two separate experimental studies, conducted with reactant partial pressures of ≤0.1 bar. Simulations without an isothermality restriction were also conducted and showed that the simulated temperature gradient across the catalytic reactor bed is <0.5 K, which validated the use of the isothermality restriction for investigating the reactor-scale phenomenological temperature dependences. The approach with the Wulff construction based reactor simulations reproduced a trend similar to one experimental data set relatively well, with the (110) surface being more active at higher temperaures; in contrast, for the other experimental data set, our reactor simulations achieve surprisingly and perhaps fortuitously good agreement with the activity and phenomenological pressure dependence when it is assumed that the (111) facet is the only active facet present. Lastly, the active phase of catalytic CO oxidation over RuO 2 remains unsettled, but the present study presents proof of principle (and progress) toward more accurate multiscale modeling from electrons to reactors and new simulation results.
SrRuO{sub 3} (SRO) thin films with different thickness (2–70 nm) have been grown on (001), (110), and (111) SrTiO{sub 3} substrates. The (001)-SRO films (2–8 nm) exhibited smooth flat surfaces whereas the (110)- and (111)-SRO films featured a faceted island structure. Room temperature resistivity and residual resistivity are the lowest for the (111)-SRO films (30–70 nm). Over all thicknesses, we observed enhanced magnetization in the (111)-SRO films (∼4 μ{sub B}/Ru) compared with that for the (001)- and (110)-SRO films (∼2 μ{sub B}/Ru and ∼3 μ{sub B}/Ru, respectively), suggesting a low-spin state t{sub 2g}(3↑,1↓), high-spin state t{sub 2g}(3↑)e{sub g}(1↑), and mixed low- and high-spin states for the (001)-, (111)-, and (110)-SRO films, respectively. The dependence of resistivity on temperatures near T{sub C} follows a power law with exponent β = 0.312 and β = 0.363 for the (110)- and (111)-SRO films, respectively. These critical exponents are consistent with magnetic data with scaling law M = C (T{sub C} − T){sup β}. At low temperatures, dM/dT and dρ/dT show a linear relationship in the temperature range for the Fermi liquid. These results suggest that the intrinsic electrical and magnetic transport properties are coupled.
The growth orientation dependence of strain relaxation and the dielectric properties were investigated for (001)- and (111)-epitaxial (Ba,Sr)TiO{sub 3} films. The films were deposited on SrRuO{sub 3}/SrTiO{sub 3} and SrTiO{sub 3} substrates using rf magnetron sputtering. The residual strain was found to be remarkably different between the two orientations, although these lattice mismatches are identical; the strain relaxation of the (001)-epitaxial films is significantly slower than that of the (111)-epitaxial films and is promoted only when the growth rate is very low ({<=}5 nm/h). The observed orientation dependence is discussed with the surface energy for both growth orientations, which influences the growth mode of the films. Due to the large contrast of the strain in the (001)- and (111)-epitaxial films, the paraelectric to ferroelectric phase transition temperature of the (001)-epitaxial films is much higher than that of unstrained bulks, while the (111)-epitaxial films show a phase transition temperature corresponding to that of unstrained bulks regardless of the growth rates.
Bi{sub 0.95}Ce{sub 0.05}FeO{sub 3} (BCFO) thin films were grown on SrRuO{sub 3}/TiO{sub 2}/SiO{sub 2}/Si(100) substrates via radio frequency sputtering. The BCFO thin film has a (111) orientation with a high phase purity. Improved dielectric behavior is observed for the BCFO thin film as compared with that of pure bismuth ferrite thin film. A large remanent polarization of 2P{sub r} {approx} 183.9 {mu}C/cm{sup 2} is induced in the BCFO thin film, owing to the (111) orientation and the introduction of Ce. The local phase decomposition induced by larger depolarization fields and the oxygen vacancies dominates the fatigue resistance of the BCFO thin film.
Multiferroic (Bi{sub 0.90}La{sub 0.10})(Fe{sub 0.95}Mn{sub 0.05})O{sub 3} (BLFMO) thin films were deposited on SrRuO{sub 3} (SRO) buffered Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates with variable buffer layer thicknesses by using off-axis radio frequency sputtering. The orientation of BLFMO thin films is dependent on the SRO buffer layer thickness, which leads to a change in ferroelectric behavior. Due to the low leakage currents arising from the orientation change in association with the variation in SRO buffer layer thickness and the La and Mn codoping, well saturated P-E hysteresis loops (2P{sub r}approx210.0 muC/cm{sup 2} and 2E{sub c}approx525.5 kV/cm) are shown for the (111)-oriented BLFMO thin film at room temperature and 1 kHz. It also demonstrates little ferroelectric fatigue on 10{sup 9} switching cycles. Moreover, the BLFMO thin film exhibits the enhanced magnetic behavior as compared to pure BFO thin films, due to the canting of antiferromagnetically ordered spins.
Thermal transport properties at the metal/MoS{sub 2} interfaces are analyzed by using an atomistic phonon transport model based on the Landauer formalism and first-principles calculations. The considered structures include chemisorbed Sc(0001)/MoS{sub 2} and Ru(0001)/MoS{sub 2}, physisorbed Au(111)/MoS{sub 2}, as well as Pd(111)/MoS{sub 2} with intermediate characteristics. Calculated results illustrate a distinctive dependence of thermal transfer on the details of interfacial microstructures. More specifically, the chemisorbed case with a stronger bonding exhibits a generally smaller interfacial thermal resistance than the physisorbed. Comparison between metal/MoS{sub 2} and metal/graphene systems suggests that metal/MoS{sub 2} is significantly more resistive. Further examination of lattice dynamics identifies the presence of multiple distinct atomic planes and bonding patterns at the interface as the key origins of the observed large thermal resistance.
Polycrystalline samples of La{sub 18}Li{sub 8}Rh{sub 4}MO{sub 39} (M=Ti, Mn, Ru) have been prepared by a solid-state method and studied by neutron powder diffraction. They are isostructural with La{sub 18}Li{sub 8}Rh{sub 5}O{sub 39} and adopt the cubic space group Pm3{sup -bar }n with a {approx}12.22 A. Their structure consists of a La-O framework containing intersecting channels that run along <111>. These channels are occupied by chains made up of alternating, face-sharing trigonal-prismatic and octahedral coordination polyhedra; there are two crystallographically distinct types of octahedral site. The prisms are occupied by Li and the transition metals are disordered over the two octahedral sites. - Graphical abstract: The substitution of Ti, Mn or Ru into La{sub 18}Li{sub 8}Rh{sub 5}O{sub 39} results in the loss of the cation ordering seen in the parent compound.
Experimental and theoretical details concerning the directional elastic peak electron spectroscopy are presented. The application of this experimental method to the identification of a crystalline structure of surface layers is shown for Cu(111) and Ru(0001), which enables the analysis of different surface terminations associated with different sequences of atoms along the surface normal. Theoretical data are obtained by applying the multiple scattering theory and different sources of phase shifts. The quantitative analysis performed by an R-factor reveals almost the same populations of A and B terminated (0001) terraces and proves explicitly the presence of steps of atomic height on the clean Ru(0001) surface. This is not the case for the Cu(111) surface, where the terrace termination does not affect the distribution of atomic directions within the first few atomic layers. The averaging of theoretical data versus scattering volume defined by the sphere radius R{sub max} around the emitter site is discussed in view of the computation time optimization. - Highlights: • We examined the structure and surface termination of fcc and hcp monocrystals. • Crystalline structure within the first few atomic layers was determined by DEPES. • Multiple scattering formalism was used to obtain theoretical results. • Populations of terraces with different terminations were determined. • Scattering parameters are discussed in the context of computation time optimization.