Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RUPTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Machine Learning Augmented Predictive and Generative Model for Rupture Life in Ferritic and Austenitic Steels

The Larson-Miller parameter (LMP) offers an efficient and fast scheme to estimate the creep rupture life of alloy materials for high temperature applications. However, owing to poor generalizability and dependence on the constant C, which is typically not known a-priori, estimations using the Larson-Miller parameter often result in suboptimal performance for a wide range of materials. At best it is useful in comparing alloys of similar composition. In this work, three machine learning (ML) schemes were developed for rupture life prediction for 9-12% Cr ferritic-martensitic steels and austenitic stainless steels, i.e., a hierarchical model to parameterize LMP using the LMP constant C to compute rupture life, a hierarchical model to parameterize both C and LMP to compute rupture life, and a direct prediction of rupture life. Specifically, we show that the third scheme, using a gradient boosting algorithm, can be used to train ML models for very accurate prediction of rupture life in a variety of alloys (Pear-son Correlation Coefficient > 0.9 for 9-12% Cr and > 0.8 for austenitic stainless steels). In addition, the Shapley value was used to quantify feature importance, making the model interpretable by identifying the effect of various features on the model performance. Furthermore, a variational autoencoder-based generative model was built by conditioning on the experimental dataset to sample hypothetical synthetic candidate alloys from the learnt joint distribution not existing in both 9-12 % Cr ferritic-martensitic steel and austenitic stainless steel datasets. Finally, based on the predictive and generative model, a reinforcement learning strategy has been proposed to guide experimentalists into designing better heat resistant alloys.

Mamun, Md Osman G.↗

Insights into Slip-Rate Time Functions, Rupture Parameter Correlations, and Ground Motions from Validated Multicycle Earthquake Ruptures

Earthquake strong-motion predictions using kinematic source modeling require knowledge of the slip-rate functions (SRFs) along the rupture and their distinct characteristics in asperities, background (off-asperity) areas and near the surface. Here, in this study we analyzed SRFs from well-validated, self-consistent, and fully dynamic rupture models from earthquake cycles obeying a rate-and-state friction law, from our companion study (Galvez et al., 2021). The shapes of SRFs in asperities are well described by the regularized Yoffe function (RYF), which has only two parameters: rise time T r and smoothing time T s , which control the generation of long- and short-period ground motions, respectively. In background areas, we demonstrate that, in addition to the primary rupture, multiple secondary ruptures may also nucleate from rupture heterogeneities related to asperities, resulting in SRFs with multiple peaks. Because it is impossible to fit a multiple-peak SRF by the single-peak RYF, we describe SRFs in background areas in an effective way by fitting their amplitude spectra with the RYF spectra. Such spectrally effective RYFs capture salient aspects of seismic-wave generation and can be used in rupture generators for strong motion prediction. We found that small T s values correlate with small characteristic weakening distances, large peak slip rates (PSRs), and large rupture velocities. T r values are larger in background areas and smaller in asperities. Within the shallow aseismic zone, T s values approximately quadruple whereas T r values approximately double. Because of this dominant T s increase, PSR values decrease in the near-surface zone. These features indicate that the generation of strong motions by the near-surface portions of the rupture is negligible in the studied scenarios.

Geosciences↗

Seismic rupture and ground accelerations induced by CO 2 injection in the shallow crust

We present that because of the critically stressed nature of the upper crust, the injection of large volumes of carbon dioxide (CO 2 ) into shallow geological reservoirs can trigger seismicity and induce ground deformations when the injection increases the fluid pressure in the vicinity of potentially seismic faults. The increased fluid pressure reduces the strength against fault slip, allowing the stored elastic energy to be released in seismic events that can produce felt ground accelerations. Here, we seek to explore the likelihood ground motions induced by a CO 2 injection using hydromechanical modelling with multiphase fluid flow and dynamic rupture, including fault-frictional weakening. We extend the previous work of Cappa and Rutqvist, in which activation of a normal fault at critical stress may be possible for fast rupture nucleating by localized increase in fluid pressure and large decrease in fault friction. In this paper, we include seismic wave propagation generated by the rupture. For our assumed system and injection rate, simulations show that after a few days of injection, a dynamic fault rupture of few centimetres nucleates at the base of the CO 2 reservoir and grows bilaterally, both toward the top of the reservoir and outside. The rupture is asymmetric and affects a larger zone below the reservoir where the rupture is self-propagating (without any further pressure increase) as a result of fault-strength weakening. The acceleration and deceleration of the rupture generate waves and result in ground accelerations (~0.1–0.6 g) consistent with observed ground motion records. Finally, the maximum ground acceleration is obtained near the fault, and horizontal accelerations are generally markedly higher than vertical accelerations.

58 GEOSCIENCES↗

Liver Hydatid Cyst with Transdiaphragmatic Rupture and Lung Hydatid Cyst Ruptured into Bronchi and Pleural Space

The aim of this case study is to present effectiveness of percutaneous drainage as a treatment option of ruptured lung and liver hydatid cysts. A 65-year-old male patient was admitted with complicated liver and lung hydatid cysts. A liver hydatid cyst had ruptured transdiaphragmatically, and a lung hydatid cyst had ruptured both into bronchi and pleural space. The patient could not undergo surgery because of decreased respiratory function. Both cysts were drained percutaneously using oral albendazole. Povidone-iodine was used to treat the liver cyst after closure of the diaphragmatic rupture. The drainage was considered successful, and the patient had no recurrence of signs and symptoms. Clinical, laboratory, and radiologic recovery was observed during 2.5 months of catheterization. The patient was asymptomatic after catheter drainage. No recurrence was detected during 86 months of follow-up. For inoperable patients with ruptured liver and lung hydatid cysts, percutaneous drainage with oral albendazole is an alternative treatment option to surgery. The percutaneous approach can be life-saving in such cases.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Rupturing of Biological Spores As a Source of Secondary Particles in Amazonia

Airborne biological particles, such as fungal spores and pollen, are ubiquitous in the Earth’s atmosphere and play an important role in the atmospheric environment and climate, impacting air quality, cloud formation, and the Earth’s radiation budget. The atmospheric transformations of airborne biological spores at elevated relative humidity remain poorly understood and their climatic role is uncertain. Using an environmental scanning electron microscope (ESEM), we observed rupturing of Amazonian fungal spores and subsequent release of nanometer to submicron size fragments after exposure to high humidity. We find that fungal fragments contain elements of inorganic salts (e.g., Na and Cl). They are hygroscopic in nature with a growth factor up to 2.3 at 96% relative humidity, thus they may potentially influence cloud formation. Due to their hygroscopic growth, light scattering cross sections of the fragments are enhanced by up to a factor of 10. Furthermore, rupturing of fungal spores at high humidity may explain the bursting events of nanoparticles and may provide insight into new particle formation in Amazonia.

Environmental Molecular Sciences Laboratory↗

Can Surgeons Assess CT Suitability for Endovascular Repair (EVAR) in Ruptured Abdominal Aortic Aneurysm? Implications for a Ruptured EVAR Trial

The purpose of this study was to determine whether surgeons without formal radiological training are able to assess suitability of patients with ruptured abdominal aortic aneurysms (AAA) for EVAR. The CT scans of 20 patients with AAA were reviewed under timed conditions by six vascular surgeons. Twenty minutes was allocated per scan. They were asked to determine if each aneurysm would be treatable by EVAR in the emergency setting and, if so, to measure for device selection. The results were then compared with those of a vascular radiologist. Six surgeons agreed on the suitability of endovascular repair in 45% of cases (95% CI, 23.1-68.5%; 9/20 scans; {kappa} = 0.41 [p = 0.01]) and concurred with the radiologist in eight of these. Individually, agreement ranged from 13 to 16 of the 20 scans, 65-80% between surgeons. The kappa value for agreement between all the surgeons and the radiologist was 0.47 (p = 0.01, moderate agreement). For the individual surgeons, this ranged from 0.3 to 0.6 (p = 0.01). In conclusion, while overall agreement was moderate between the surgeons and the radiologist, it is clear that if surgeons are to assess patients for ruptured EVAR in the future, focused training of surgical trainees is required.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dynamic Approach to Dependency Analysis in Human Reliability Analysis: Application in a Stream Generator Tube Rupture Scenario

Dependency analysis in human reliability analysis (HRA) is a method of adjusting the failure probability of a given action by considering the impact of the action preceding it. It plays a role in reasonably accounting for human actions in the context of probabilistic safety assessments (PSAs), preventing PSA results from being estimated too optimistically based on the HRA results. Nevertheless, the existing dependency methods present a couple of challenges in that the quantification approaches rarely explain the adjustment of human error probabilities (HEPs). For this reason, the authors’ previous research has pointed out challenges of the existing dependency approaches and conceptually, theoretically proposed a performance shaping factor (PSF)-based dynamic dependency analysis method for HRA in order to complement the existing dependency methods. The current paper explores the latest version of the method and guidance for applying it to a steam generator tube rupture (SGTR) scenario.

99 GENERAL AND MISCELLANEOUS↗

Do voids nucleate at grain boundaries during ductile rupture? [Do voids initiate at grain boundaries during ductile rupture?]

In the absence of pre-existing failure-critical defects, the fracture or tearing process in deformable metals loaded in tension begins with the nucleation of internal cavities or voids in regions of elevated triaxial stress. While ductile rupture processes initiate at inclusions or precipitates in many alloys, nucleation in pure metals is often assumed to be associated with grain boundaries or triple junctions. This study presents ex situ observations of incipient, subsurface void nucleation in pure tantalum during interrupted uniaxial tensile tests using electron channeling contrast (ECC) imaging, electron backscatter diffraction (EBSD), transmission Kikuchi diffraction (TKD) and transmission electron microscopy (TEM). Instead of forming at grain boundaries, voids initiated at and grew along dislocation cell and cell block boundaries created by plastic deformation. Most of the voids were associated with extended, lamellar deformation-induced boundaries that run along the traces of the {110} or {112} planes, though a few voids initiated at low-angle dislocation subgrain boundaries. In general, a high density of deformation-induced boundaries was observed near the voids. TEM and TKD demonstrate that voids initiate at and grow along cell block boundaries. Two mechanisms for void nucleation in pure metals, vacancy condensation and stored energy dissipation, are discussed in light of these results. In conclusion, the observations of the present investigation suggest that voids in pure materials nucleate by vacancy condensation and subsequently grow by consuming dislocations.

36 MATERIALS SCIENCE↗

Strain partition and rupture analysis of notched tensile multilayered steel specimens

Highlights: • In situ SEM tensile experiments were performed to investigate the fracture processes. • In situ synchrotron x-ray diffraction were carried out to study the microscopic deformation in MLS steel. • The changing trends of the strain in the austenite layer and martensitic layer have been revealed. - Abstract: Multilayered steel composites consisting of alternating martensitic and austenite layers were successfully fabricated with a combination of high strength and ductility. In situ SEM tensile experiments were performed to investigate the fracture processes. Results indicated that the martensitic layer distributed between two ductile austenite layers has better deformation ability, and the dimple fracture mode dominated the fracture of the whole specimen. In situ synchrotron microbeam X-ray diffraction experiments were carried out to study the microscopic deformation in austenitic layer and martensitic layer ahead of notch root under incremental tensile loading. Results indicated that for austenite layer, the maximum strain is located in the middle of the layer at the lower applied load. When at the higher applied load, larger strain is concentrated on the notch root. For martensitic layer, uniform strain is distributed at the region at the lower applied load, with increasing the applied load, small strain appears in the middle of martensitic layer. However, the variation in the strain in the martensitic layer is relatively smaller, which is actually affected by both the notch and the ferrite content in the martensitic layer. The changing trends of the strain in the austenite layer and martensitic layer can still show the better combination of brittle martensitic phase and ductile austenite phase.

36 MATERIALS SCIENCE↗

Dynamic Rupture Simulations of the Mw7.2 1992 Landers,California, Earthquake

An important part of the simulation technique implemented in the Recipe is the earthquake rupture characterization based on established empirical scaling relationships between source parameters and seismic moment. The scaling relationships used in the rupture characterization are derived from recorded data and are tested against dynamic and kinematic rupture models of crustal earthquakes. Currently, a revised three-stage source scaling relationship between the source rupture area and seismic moment of inland crustal earthquakes, initially proposed by Irikura and Miyake, is being used. Recent analysis of results obtained with the Recipe for the 2016 M7.1 Kumamoto earthquake performed by several researchers, including the PI, Arben Pitarka, indicate that in order to reproduce the near-fault long-period ground motions and the permanent displacements, observed during surface-rupturing earthquakes, the recipe needs modifications to the kinematic rupture parametrization in the shallow crustal weak zone. In particular, improvements are required in characterizing the slip rate function at shallow depths, above the sesimogenic zone. The main objective of this research project was the development of a dynamic rupture model for the Mw7.2 1992 Landers, California earthquake. The dynamic rupture model was used to derive kinematic rupture parameters, such as slip, slip-rate, rupture time distributions, and slip rate functions in the weak (0-4km) and seismogenic crustal zones. In addition to the knowledge gained from the dynamic rupture modeling of Chi-chi, Ridgecrest, Kumamoto and other crustal earthquakes, studied by the PI, the rupture characterization of the Landers earthquake can be helpful in updating the conventional recipe for broadband ground motion simulations of crustal earthquakes with shallow rupture. The project emphasizes the need for performing physics-based earthquake rupture modeling which ultimately will inform further improvements of rupture characterization. In particular, the modeling of rupture dynamics for recorded earthquakes, and numerical simulations for different rupture scenarios, provides physical constrains on slip evolution in time and space, used in adjustments of empirical source scaling relationships for large crustal earthquakes.

58 GEOSCIENCES↗

Toward tsunami early warning system in Indonesia by using rapid rupture durations estimation

Indonesia has Indonesian Tsunami Early Warning System (Ina-TEWS) since 2008. The Ina-TEWS has used automatic processing on hypocenter; Mwp, Mw (mB) and Mj. If earthquake occurred in Ocean, depth < 70 km and magnitude > 7, then Ina-TEWS announce early warning that the earthquake can generate tsunami. However, the announcement of the Ina-TEWS is still not accuracy. Purposes of this research are to estimate earthquake rupture duration of large Indonesia earthquakes that occurred in Indian Ocean, Java, Timor sea, Banda sea, Arafura sea and Pasific ocean. We analyzed at least 330 vertical seismogram recorded by IRIS-DMC network using a direct procedure for rapid assessment of earthquake tsunami potential using simple measures on P-wave vertical seismograms on the velocity records, and the likelihood that the high-frequency, apparent rupture duration, T{sub dur}. T{sub dur} can be related to the critical parameters rupture length (L), depth (z), and shear modulus ({mu}) while T{sub dur} may be related to wide (W), slip (D), z or {mu}. Our analysis shows that the rupture duration has a stronger influence to generate tsunami than Mw and depth. The rupture duration gives more information on tsunami impact, Mo/{mu}, depth and size than Mw and other currently used discriminants. We show more information which known from the rupture durations. The longer rupture duration, the shallower source of the earthquake. For rupture duration greater than 50 s, the depth less than 50 km, Mw greater than 7, the longer rupture length, because T{sub dur} is proportional L and greater Mo/{mu}. Because Mo/{mu} is proportional L. So, with rupture duration information can be known information of the four parameters. We also suggest that tsunami potential is not directly related to the faulting type of source and for events that have rupture duration greater than 50 s, the earthquakes generated tsunami. With available real-time seismogram data, rapid calculation, rupture duration discriminant can be completed within 4-5 min after an earthquake occurs and thus can aid in effective, accuracy and reliable tsunami early warning for Indonesia region.

58 GEOSCIENCES↗

Dynamic simulation of CO 2 -injection-induced fault rupture with slip-rate dependent friction coefficient

It is known that poro-elastic stress and effective stress reduction associated with deep underground fluid injection can potentially trigger shear rupture along pre-existing faults. We modeled an idealized CO 2 injection scenario, to assess the effects on faults in the first phase of a generic CO 2 aquifer storage operation. We used coupled multiphase fluid flow and geomechanical numerical modeling to evaluate the stress and pressure perturbations induced by fluid injection and the response of a nearby normal fault. Slip-rate dependent friction and inertial effects have been taken into account during rupture. Contact elements have been used to take into account the frictional behavior of the rupture plane. We investigated different scenarios of injection rate to induce rupture on the fault, employing various fault rheologies. Published laboratory data on CO 2 -saturated intact and crushed rock samples, representative of a potential target aquifer, sealing formation and fault gouge, have been used to define a scenario where different fault rheologies apply at different depths. Nucleation of fault rupture takes place at the bottom of the reservoir, in agreement with analytical poro-elastic stress calculations, depending on injection-induced reservoir inflation and the tectonic stress scenario. For the stress state considered here, the first triggered rupture always produces the largest rupture length and slip magnitude, both of which correlate with the fault rheology. Velocity weakening produces larger ruptures and generates larger magnitude seismic events. Heterogeneous faults have been considered including velocity-weakening or velocity strengthening sections inside and below the aquifer, with the upper sections being velocity-neutral. Nucleation of rupture in a velocity-strengthening section results in a limited rupture extension, both in terms of maximum slip and rupture length. For a heterogeneous fault with nucleation in a velocity-weakening section, the rupture may propagate into the overlying velocity-neutral section, if the extent of velocity-weakening and associated friction drop are large enough.

58 GEOSCIENCES↗

Dynamic Rupture Modeling of the M7.1, 2019 Ridgecrest, California, Earthquake

An important part of the simulation technique implemented in the strong motion prediction recipe developed in Japan, originally proposed by Irikura and Miyake (2011) is the earthquake rupture characterization that is based on established empirical scaling relationships between source parameters and seismic moment. These scaling relationships and rupture characterization are derived from recorded data and are tested by simulations. Recent analysis of results obtained with the Recipe for the 2016 M7.1 Kumamoto earthquake performed by several researchers, indicate that in order to reproduce near-fault long-period ground motions with permanent displacements, typical for earthquakes with surface rupturing, the recipe needs modifications. In particular, improvements are required in characterizing the rupture kinematics at shallow depths, above the seismogenic zone (Irikura et al., 2019). Modeling of rupture dynamics for recorded earthquakes, and numerical simulations for different rupture scenarios, provides physical constrains on slip evolution in time and space, which can be used in adjustments of empirical source scaling relationships for large crustal earthquakes. In this study we mainly focused on rupture dynamics modeling of the 2019 M7 Ridgecrest, California earthquake. The characterization of the kinematic rupture model derived from the dynamic rupture models of this earthquake can inform further refinements of rupture modeling proposed by the Recipe. Through different rupture scenarios we investigated potential relationships between characteristics of Long Period Ground Motion Generation Area (LMGA), used in the Recipe, and asperity depth and rupture initiation.

58 GEOSCIENCES↗

MECHANISTIC MULTIPHYSICS MODELING OF CLADDING RUPTURE IN NUCLEAR FUEL RODS DURING LOSS-OF-COOLANT ACCIDENT CONDITIONS

The Loss of Coolant Accident (LOCA) is a design basis accident that is included as part of the safety analysis of nuclear power plants. As the nuclear industry desires to increase the cycle length and discharge burnup of existing nuclear power plants they must demonstrate safe operation during a LOCA on high burnup fuel. During a LOCA transient on high burnup fuel rods, the rods may undergo a process known as fuel fragmentation, relocation, and dispersal (FFRD). To permit dispersal, the cladding encapsulating the fuel must rupture with an opening size large enough to allow the fragmented fuel particles to release. Current licensing tools used by industry and the United States Nuclear Regulatory Commission are limited in geometric fidelity and materials that can be analyzed. These simulation tools generally employ a quasi-two-dimensional (1.5D or Layered1D) or 2D-RZ axisymmetric geometric representations exclusively. While a valid approach under some instances, there are times when important physics have an asymmetric behavior in the fuel rod. Examples include fuel fragmentation, thermal-hydraulic boundary conditions, and cladding rupture, all of which are important for LOCA analysis. As industry pursues burnup extensions it must be demonstrated that fuel dispersal can be mitigated or eliminated. To do this, an understanding of the rupture opening after cladding failure is required. This work presents the development of a model for predicting the size and location of the rupture opening in failed fuel rods during LOCA conditions using advanced modeling and simulation tools. In order to supply the rupture model with appropriate boundary conditions, improvements to fuel fragmentation, axial relocation and oxidation modeling were required. First, the eXtended Finite Element Method (XFEM) is used to mechanistically predict the number of fuel fragments that form due to material strength randomization, criteria for strength randomization, mesh density, power ramping rates and irradiation effects. These predictions with associated uncertainty were compared to empirical correlations developed for UO2 verifying that they can be used with increased confidence in subsequent axial relocation analyses. Secondly, a new first-of-its-kind Layered2D computational framework was developed that provides the ability to apply azimuthally varying boundary conditions while providing discrete layers to track fuel movement during the LOCA. An existing fuel axial relocation model developed for Layered1D was extended to work within the Layered2D framework. A large sensitivity study was performed on the initial version of the model to identify modeling parameters of particular importance, with the emissivity used for radiation after blowdown being the primary source of uncertainty. Then, a simplistic approach to incorporate mechanical degradation of the cladding due to oxidation was also developed to investigate the impact of reduced cladding thickness on predictions of the time to failure of cladding tubes. It was found that the cladding will typically rupture prior to a reduction in thickness that is sufficient to impact the rupture behavior. A model was then developed for predicting cladding rupture that transfers the cladding surface temperatures, rod internal and external pressures, fast neutron fluence, and fast neutron flux from a more detailed Layered1D, Layered2D, or 2D-RZ analysis to a 3D cladding only analysis. Comparisons of the rupture model to a few experiments indicate reasonable predictions. The rupture model was then applied to two accident tolerant fuel concepts (FeCrAl and Cr-coated Zircaloy) where it predicted that both ATF concepts would have smaller rupture openings and delayed rupture times than the standard Zircaloy-4 cladding material under identical loading conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Model for determining rupture area in Zircaloy cladding under LOCA conditions

The dispersal of nuclear fuel through a cladding rupture opening during a transient event is the primary safety concern preventing the United States nuclear industry from extending burnup beyond a peak rod average burnup of 62 GWd/tU. The majority of research thus far has prioritized understanding, or at a minimum prioritized quantifying, fuel fragmentation and pulverization as a function of burnup and to a lesser extent onset temperature. Early high burnup loss-of-coolant accident tests performed at the Halden Boiling Water Reactor evaluated the impact of relocation on cladding temperature, whereas historical and recent cladding burst tests focused primarily on generating data related to cladding balloon and burst timing. However, very little effort has been put forth to develop a relationship for determining the rupture opening dimensions for Zircaloy cladding tubes bursting during a simulated light water reactor loss-of-coolant accident. This is significant because high burnup loss-of-coolant accident data suggest dispersal could be limited by the size of the rupture opening or rupture dimensions, thereby minimizing the safety concern. Therefore, the purpose of this research is to build a database composed of all simulated loss-of-coolant accident data to develop an empirical model that conservatively captures the rupture opening dimensions and translates those dimensions to rupture area. Analysis of the experimental data indicates the rupture dimensions are strongly correlated to the peak balloon strain. This relationship is leveraged to develop a rupture length empirical correlation as a function of peak balloon strain and a rupture width empirical correlation as a function of rupture length. Outliers in the experimental data are identified and discussed. Finally, the rupture opening empirical model is presented in such a way for general implementation into high fidelity fuel performance codes or fuel performance codes used for safety analyses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗