Quantifying Aleatoric and Epistemic Uncertainties in RLC Circuits with Data-consistent Inversion.
Abstract not provided.
Yen, Tian Yu↗
SEARCH · Engineering Papers
Results for “RLC circuit”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-speed feedback control of an oscillating magnetic helicity injector using a graphics processing unit
A real-time control system has been developed to control the amplitude, phase, and offset of bulk plasma parameters inside an oscillating magnetic helicity injector. Control software running entirely on an Nvidia Tesla P40 graphical processing unit is able to receive digitizer inputs and send response patterns to a Pulse Width Modulation (PWM) controller with a minimum control loop period of 12.8μs. With an input digitization rate of 10 MS/s, a three-parameter proportional integral differential controller is shown to be sufficient to inform the PWM controller to drive the desired oscillating plasma waveform with a frequency of 16.6 kHz that is located near the resonance of a coupled RLC circuit. In particular, the temporal phase of the injector waveform is held within 10 degrees of the target value. Control is demonstrated over the toroidal modal structure of the imposed magnetic perturbations of the helicity injection system, allowing a new class of discharges to be studied.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Analysis and mitigation of an oscillating background on hybrid complementary metal-oxide semiconductor (hCMOS) imaging sensors at the National Ignition Facility
Nanosecond-gated hybrid complementary metal-oxide semiconductor imaging sensors are a powerful tool for temporally gated and spatially resolved measurements in high energy density science, including inertial confinement fusion, and in laser diagnostics. However, a significant oscillating background excited by photocurrent has been observed in image sequences during testing and in experiments at the National Ignition Facility (NIF). Characterization measurements and simulation results are used to explain the oscillations as the convolution of the pixel-level sensor response with a sensor-wide RLC circuit ringing. Finally, data correction techniques are discussed for NIF diagnostics, and for diagnostics where these techniques cannot be used, a proof-of-principle image correction algorithm is presented.
42 ENGINEERING↗
Tradeoffs in single stage drift step recovery diode generator design
A high-voltage generator of nanosecond pulses utilizing a drift step recovery diode (DSRD) as an opening switch in the compression section is designed to operate at peak voltages of 4 kV and repetition rates of 2 MHz in burst mode at reduced voltages. The generator is used to perform empirical studies on the output metrics of a DSRD generator with a focus on matching the circuit of the reverse current loop parameters and DSRD to the load. The dynamic impedance introduced by nonlinear elements in the DSRD was investigated with respect to the driving circuit by varying the number of DSRDs connected in series. Experimental results indicate that optimization of the driving circuit for the DSRD is key to minimizing losses and achieving optimal pulse compression. Furthermore, the results also indicate trends in DSRD performance as larger storage inductances and longer pumping times are used, limiting the pulse compression capabilities of a single stage DSRD generator.
Electrical properties and parameters↗
Spark Channel Dynamics of Electrostatic Discharges (Rev. 1) [Slides]
To model spark discharges, this work implemented, verified, and validated: 1-D radial conservative Lagrangian hydrodynamic scheme (with heat conduction); Eddington/P1 radiative transfer approximation, time-implicit scheme; RLC circuit solver, time-implicit scheme (adaptable to other circuit types). Novel analytics EOS fit for air up to temperatures of ~150,000 K. Novel "seed" electron concept to initialize finite conductivity in spark without pre-heating the air in the channel, as typically used in spark modeling literature. Reasonable, if conservative (from an engineering viewpoint), agreement with experimental data for indirect (circuit) and direct (interferometry) measurements of spark. Many potential avenues of future work: Two-temperature dryodynamics (requires two-temperature EOS development); 2-D axisymmetric geometry for axial (z) variation, modeling delectric electrodes; Kinetic equations for time-dependent charged species populations.
42 ENGINEERING↗
Study of the Design and Characteristics of a Modified Pulsed Plasma Thruster with Graphite and Tungsten Trigger Electrodes
The paper presents experimental results for a modified pulsed plasma thruster (PPT) with solid propellant, using a coaxial anode–cathode design. Graphite from pencil leads served as propellant, and a tungsten trigger electrode was tested to reduce carbonization effects. Experiments were performed in a vacuum chamber at 0.001 Pa, employing diagnostics such as discharge current/voltage recording, power measurement, ballistic pendulum, time-of-flight (TOF) method, and a Faraday cup. Current and voltage waveforms matched an oscillatory RLC circuit with variable plasma channel resistance. Key discharge parameters were measured, including current pulse duration/amplitude and plasma channel formation/decay dynamics. Impulse bit values, obtained with a ballistic pendulum, reached up to 8.5 μN·s. Increasing trigger capacitor capacitance reduced thrust due to unstable “pre-plasma” formation and partial pre-discharge energy loss. Using TOF and Faraday cup diagnostics, plasma front velocity, ion current amplitude, current density, and ion concentration were determined. Tungsten electrodes produced lower charged particle concentrations than graphite but offered better adhesion resistance, minimal carbonization, and stable long-term performance. The findings support optimizing trigger electrode materials and PPT operating modes to extend lifetime and stabilize thrust output.
Faraday cup↗
Analog Quantum Simulation of the Dynamics of Open Quantum Systems with Quantum Dots and Microelectronic Circuits
We introduce a general setup for the analog quantum simulation of the dynamics of open quantum systems based on semiconductor quantum dots electrically connected to a chain of quantum RLC electronic circuits. The dots are chosen to be in the regime of spin-charge hybridization to enhance their sensitivity to the RLC circuits while mitigating the detrimental effects of unwanted noise. In this context, we establish an experimentally realizable map between the hybrid system and a qubit coupled to thermal harmonic environments of arbitrary complexity that enables the analog quantum simulation of open quantum systems. We assess the utility of the simulator by numerically exact emulations that indicate that the experimental setup can faithfully mimic the intended target even in the presence of its natural inherent noise. We further provide a detailed analysis of the physical requirements on the quantum dots and the RLC circuits needed to experimentally realize this proposal that indicates that the simulator can be created with existing technology. The approach can exactly capture the effects of highly structured non-Markovian quantum environments typical of photosynthesis and chemical dynamics, and offer clear potential advantages over conventional and even quantum computation. The proposal opens a general path for effective quantum dynamics simulations based on semiconductor quantum dots.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Simulating a pulsed-power-driven plasma with ideal MHD
We describe a simple practical numerical method for simulating plasma driven within a vacuum chamber by a pulsed power generator. Typically, in this type of simulation, the vacuum region adjacent to the plasma is approximated as a highly resistive, light fluid; this involves computationally expensive solvers describing the diffusion of the magnetic field through this fluid. Instead, we provide a recipe for coupling pulsed power generators to the magnetohydrodynamics (MHD) domain by approximating the perfectly insulating vacuum as a light, perfectly conducting, inviscid MHD fluid and discuss the applicability of this counter-intuitive technique. This much more affordable ideal MHD representation is particularly useful in situations where a plasma exhibits interesting three-dimensional phenomena, either due to the design of the experiment or due to developing instabilities. We verified that this coupling recipe works by modeling an exactly solvable flux compression generator as well as a self-similar Noh-like solution and demonstrated convergence to the theoretical solution. We also showed examples of simulating complex three-dimensional pulsed power devices with this technique. We release our code implementation to the public.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Spark Channel Dynamics of Electrostatic Discharges
When two differently-charged objects are brought in close proximity to each other, the resulting high electric fields can cause electron avalanche breakdown of the air gap separating the objects, a process known as electrostatic discharge (ESD). If enough initial charge is stored on the objects, the electrical breakdown can proceed to ionize the air to such a degree that a highly conductive filament of plasma forms in the gap, known as a spark channel. The spark electrically bridges the air gap, resulting in a rapid pulse of current that neutralizes the charge difference. The current pulse produces significant heating of the gas in the spark, resulting in dissociation, ionization, thermal radiation, and hydrodynamic expansion. ESD presents a hazard to electrically-sensitive devices, with consequences such as economic losses (e.g. damaged electronics) or unsafe response (e.g. unintended ignition of flammable gas mixtures, initiation of detonators, etc.). For this thesis, the ESD spark is taken to occur between two conducting electrodes, with the spark channel being axisymmetric in a cylindrical coordinate system centered on the channel. An RLC-type circuit is used for the discharge model of the ESD event. The spark is treated as a time-dependent resistance that is in series with a capacitance, an inductance, and (optionally) a load resistance representing a “victim” component under threat from the ESD event. The primary motivation of this work is to use a numerical hydrodynamic model to understand the energy dissipation and transport processes in the spark. The model consists of the compressible Euler equations of mass, momentum, and energy conservation together with an Eddington/P1 approximation for thermal radiation transport. To close the hydrodynamic system, an equation of state (EOS) was fitted from tabular data for air that accounts for the dissociation and ionization of air species. The hydrodynamic equations are solved using a conservative Lagrangian finite volume method. These partial differential equations are coupled to the circuit equations by calculation of the spark resistance via numerical integration of the electrical conductivity of the channel. Computational results are compared against experimental measurements of discharge current and radial density of the spark channel.
42 ENGINEERING↗