Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RHODIUM 100”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Seedless Polyol Synthesis and CO Oxidation Activity of Monodisperse (111) and (100)-Oriented Rhodium Nanocrystals in Sub-10 nm Sizes

Monodisperse sub-10 nm (6.5 nm) sized Rh nanocrystals with (111) and (100) surface structures were synthesized by a seedless polyol reduction in ethylene glycol, with poly(vinylpyrrolidone) as a capping ligand. When using [Rh(Ac){sub 2}]{sub 2} as the metal precursor, (111)-oriented Rh nanopolyhedra containing 76% (111)-twined hexagons (in 2D projection) were obtained; whereas, when employing RhCl{sub 3} as the metal precursor in the presence of alkylammonium bromide, such as tetramethylammonium bromide and trimethyl(tetradecyl)ammonium bromide, (100)-oriented Rh nanocubes were obtained with 85% selectivity. The {l_brace}100{r_brace} faces of the Rh nanocrystals are stabilized by chemically adsorbed Br{sup -} ions from alkylammonium bromides, which led to (100)-oriented nanocubes. Monolayer films of the (111)-oriented Rh nanopolyhedra and (100)-oriented Rh nanocubes were deposited on silicon wafers in a Langmuir-Blodgett trough to make model 2D nanoarray catalysts. These nanocatalysts were active for CO oxidation by O{sub 2}, and the turnover frequency was independent of nanoparticle shape, consistent with that previously observed for Rh(111) and Rh(100) single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Data Sheets for A = 100

The evaluated experimental data are presented for 15 known nuclides of mass 100 (Kr, Rb, Sr, Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag, Cd, In, Sn). High spin excitations are known for {sup 100}Sr, {sup 100}Zr, {sup 100}Mo, {sup 100}Tc, {sup 100}Ru, {sup 100}Rh, {sup 100}Pd, {sup 100}Ag, and {sup 100}Cd. The neutron capture data are available for {sup 100}Tc and {sup 100}Ru. Particle transfer data exist for structures in {sup 100}Nb, {sup 100}Mo, {sup 100}Tc and {sup 100}Ru. The two-neutrino {beta}{beta} decay mode in {sup 100}Mo is fully established with measured half-life and population of the g.s. and 1130,0+ state in {sup 100}Ru. The absolute energy of the isomer in {sup 100}Nb is now well established from recent Penning-trap mass measurements. Excited state data are nonexistent for {sup 100}Kr, {sup 100}Rb and {sup 100}Sn; and only one excited state is known in {sup 100}In. Except for isotopic identification, no information is available for the decay of the {sup 100}Kr isotope and very little is known about the decay properties of the {sup 100}Sn isotope. In the case of {sup 100}Pd, there are many recent studies of high-spin structures but the agreement in the orderings of the {gamma}-ray cascades and {gamma}-ray inventory between various studies remains poor at high (>9 MeV) excitation energies. The energy difference between the g.s. an isomer in {sup 100}Y has recently been precisely measured in Penning-Penning-trap mass measurements, however, the assignments of the two previously known half-lives and J{pi}'s to the respective states (g.s. and the 145-keV isomer) in {sup 100}Y remains to be established. Static moments in {sup 100}Y have also been recently measured for one of these states in {sup 100}Y but it is not definitely known as to which of the two states (g.s. or the isomer) is connected with these measurements. This work supersedes earlier full evaluations of A = 100 by 1997Si09, 1990Si05 and 1974Ko37.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Recoil-Implantation Of Multiple Radioisotopes Towards Wear Rate Measurements And Particle Tracing In Prosthetic Joints

This study demonstrates a new method of radioisotope labeling of ultra-high molecular weight polyethylene inserts in prosthetic joints for wear studies. The radioisotopes {sup 97}Ru, {sup 100}Pd, {sup 100}Rh, and {sup 101m}Rh are produced in fusion evaporation reactions induced by {sup 12}C ions in a {sup 92}Zr target foil. The fusion products recoil-implant into ultra-high molecular weight polyethylene plugs, machined to fit into the surface of the inserts. During laboratory simulations of the joint motion, a wear rate of the labeled polyethylene may be measured and the pathways of wear debris particles can be traced by detecting characteristic gamma-rays. The concentration profiles of the radioisotopes extend effectively uniformly from the polyethylene surface to a depth of about 4 {mu}m. The multiplicity of labeling and the use of several gamma-ray lines aids with avoiding systematic measurement uncertainties. Two polyethylene plugs were labeled and one was fitted into the surface of the tibial insert of a knee prosthesis, which had been worn in. Actuation over close to 100,000 cycles with a 900 N axial load and a 24 deg. flexion angle removed (14{+-}1)% of the gamma-ray activity from the plug. Most of this activity dispersed into the serum lubricant identifying this as the important debris pathway. Less than 1% activity was transferred to the femoral component of the prosthesis and the measured activity on the tibial tray was insignificant. Assuming uniform wear across the superior surface of the insert, a wear rate of (12{+-}3) mm{sup 3}/Megacycle was determined. This is consistent with wear rate measurements under similar conditions using other techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A simple description of doublet bands in mass around 100

The structure of doublet bands associated with neutron 0h{sub 11/2} and proton 0g{sub 9/2} orbital in the doubly-odd nuclei, {sup 98-104}Tc and {sup 100-106}Rh is studied theoretically using the quadrupole coupling model. The calculated energy levels and electromagnetic transitions are in excellent agreement with experimental data. The internal structure of the yrast states is discussed in terms of the QCM wave functions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mn Monolayer Modified Rh for Syngas-to-Ethanol Conversion: A First-Principles Study

Rh is unique in its ability to convert syngas to ethanol with the help of promoters. We performed systematic first-principles computations to examine the catalytic performance of pure and Mn modified Rh(100) surfaces for ethanol formation from syngas. CO dissociation on the surface as well as CO insertion between the chemisorbed CH{sub 3} and the surface are the two key steps. The CO dissociation barrier on the Mn monolayer modified Rh(100) surface is remarkably lowered by {approx}1.5 eV compared to that on Rh(100). Moreover, the reaction barrier of CO insertion into the chemisorbed CH{sub 3} group on the Mn monolayer modified Rh(100) surface is 0.34 eV lower than that of methane formation. Thus the present work provides new mechanistic insight into the role of Mn promoters in improving Rh's selectivity to convert syngas to ethanol.

03 NATURAL GAS↗

Structure of a zinc oxide ultra-thin film on Rh(100)

The structural parameters of ultra-thin zinc oxide films on Rh(100) are investigated using low-energy electron diffraction intensity (LEED I–V) curves, scanning tunneling microscopy (STM), and first-principles density functional theory (DFT) calculations. From the analysis of LEED I–V curves and DFT calculations, two optimized models A and B are determined. Their structures are basically similar to the planer h-BN ZnO(0001) structure, although some oxygen atoms protrude from the surface, associated with an in-plane shift of Zn atoms. From a comparison of experimental STM images and simulated STM images, majority and minority structures observed in the STM images represent the two optimized models A and B, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organometallic Synthesis of Bimetallic Cobalt‐Rhodium Nanoparticles in Supported Ionic Liquid Phases (Co x Rh 100− x @SILP) as Catalysts for the Selective Hydrogenation of Multifunctional Aromatic Substrates

Abstract The synthesis, characterization, and catalytic properties of bimetallic cobalt‐rhodium nanoparticles of defined Co:Rh ratios immobilized in an imidazolium‐based supported ionic liquid phase (Co x Rh 100− x @SILP) are described. Following an organometallic approach, precise control of the Co:Rh ratios is accomplished. Electron microscopy and X‐ray absorption spectroscopy confirm the formation of small, well‐dispersed, and homogeneously alloyed zero‐valent bimetallic nanoparticles in all investigated materials. Benzylideneacetone and various bicyclic heteroaromatics are used as chemical probes to investigate the hydrogenation performances of the Co x Rh 100− x @SILP materials. The Co:Rh ratio of the nanoparticles is found to have a critical influence on observed activity and selectivity, with clear synergistic effects arising from the combination of the noble metal and its 3d congener. In particular, the ability of Co x Rh 100− x @SILP catalysts to hydrogenate 6‐membered aromatic rings is found to experience a remarkable sharp switch in a narrow composition range between Co 25 Rh 75 (full ring hydrogenation) and Co 30 Rh 70 (no ring hydrogenation).

Rengshausen, Simon↗

Developing Robust Ceria-Supported Catalysts for Catalytic NO Reduction and CO/Hydrocarbon Oxidation

Synthesis of robust and hydrothermally stable PGM/ceria materials for NO, CO, and hydrocarbon abatement remains a formidable challenge, as ceria and PGMs are known to sinter severely >800 °C under hydrothermal conditions, leading to irreversible activity loss. In this work, we tackle this challenge by synthesizing well-defined catalysts with atomically dispersed rhodium supported on ceria with varying abundance of (100), (101), and (111) facets. Evaluation of these catalysts for NO reduction by CO as well as CO and propylene oxidation under model and industrially relevant conditions reveals pronounced reactivity and stability differences. Different modes of interaction of Rh ions with the ceria facets and their facile reducibility were shown to be the crucial parameters controlling reactivity, resulting in pronounced activity and stability variations. Facet-dependent poisoning of surfaces by nitrites was identified as the main reason for deactivation of the catalysts at low temperature, which is mitigated for (111) ceria facets. (111)-enriched ceria nanoparticles survive very harsh hydrothermal aging at 950 °C by maintaining and preserving (111) facets, unlike other ceria nanoparticles which sinter into poorly defined shapes. Thus, putting atomically dispersed PGM sites on (111) ceria facets lead to the catalytic material with the highest activity and stability for all studied reactions, providing the pathway to catalysts that can endure extremely harsh hydrothermal aging conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A versatile elevated-pressure reactor combined with an ultrahigh vacuum surface setup for efficient testing of model and powder catalysts under clean gas-phase conditions

A small-volume reaction cell for catalytic or photocatalytic testing of solid materials at pressures up to 1000 Torr has been coupled to a surface-science setup used for standard sample preparation and characterization under ultrahigh vacuum (UHV). The reactor and sample holder designs allow easy sample transfer from/to the UHV chamber, and investigation of both planar and small amounts of powder catalysts under the same conditions. The sample is heated with an infrared laser beam and its temperature is measured with a compact pyrometer. Combined in a regulation loop, this system ensures fast and accurate temperature control as well as clean heating. The reaction products are automatically sampled and analyzed by mass spectrometry and/or gas chromatography (GC). Unlike previous systems, our GC apparatus does not use a recirculation loop and allows working in clean conditions at pressures as low as 1 Torr while detecting partial pressures smaller than 10{sup −4} Torr. The efficiency and versatility of the reactor are demonstrated in the study of two catalytic systems: butadiene hydrogenation on Pd(100) and CO oxidation over an AuRh/TiO{sub 2} powder catalyst.

36 MATERIALS SCIENCE↗

Nuclear structure studies close to N = Z = 50

The level structures in {sup 98,99}Rh, and {sup 99}Pd nuclei have been investigated through in beam γ-ray spectroscopic techniques following the {sup 75}As({sup 28}Si, xpyn) fusion-evaporation reaction at E{sub lab} = 120 MeV. These investigations were carried out using Indian-National-Gamma-Array (INGA) consisting of Compton-suppressed clover detectors at the Inter-University Accelerator Centre, New Delhi. The level structures observed in {sup 99}Pd, and {sup 98,99}Rh have been established up to ∼ 11 MeV, 10 MeV and 16 MeV excitation energy and spin ∼ 23ħ, 23ħ, and 28ħ respectively. In the doubly-odd {sup 98}Rh nucleus, new band structures and isomeric states have been identified at lower spins and new states below the previously identified 2{sup +} ground state (T{sub 1/2} = 8.5 m) are identified. In the present work {sup 99}Rh structure have been observed similar to {sup 101}Rh which is based on p{sub 1/2} and g{sub 9/2} orbitals. Various positive and negative parity states in these nuclei are observed to be energetically more favored with respect to the neighboring ones, and are likely to be the maximally aligned states obtained by angular momentum coupling of the valence particles (holes). The level structures observed in {sup 99}Pd have been interpreted in the framework of a microscopic theory based on the deformed Hartree-Fock (HF) and angular momentum projection techniques. Band structures at low excitation energy are based on the low-Ω νg{sub 7/2} and νd{sub 5/2} orbitals, have been observed in {sup 99}Pd. Band structure at higher spins are reproduced with the ν(g{sub 7/2}){sup 2}⊗ν(g{sub 9/2}){sup −1}⊗ν(h{sub 11/2}){sup 2}⊗π(g{sub 9/2}){sup 6} configurations. Observation of new E1 transitions linking the opposite parity νh{sub 11/2} and νd{sub 5/2} bands provide fingerprints of possible octupole correlations in {sup 99}Pd. The extracted values of the B(E1)/B(E2) ratios for the lower levels in the νh{sub 11/2} band are ∼ 10{sup −7} [fm]{sup −2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards the studies of proton ground-state radioactivities below {sup 100}Sn

The discovery potential for new proton-emitting isotopes of elements with atomic numbers 35<Z<47 in a classical implantation-decay experiment is analyzed. In particular, proton separation energies and half-lives as well as the production and detection methods are discussed for nuclei below {sup 100}Sn. Fusion-evaporation reactions studied by means of the Recoil Mass Separator at the Holifield Radioactive Ion Beam Facility (HRIBF) at Oak Ridge National Laboratory are compared to heavy-ion fragmentation based studies at the National Superconducting Cyclotron Laboratory using the A1900 separator. The l = 4 proton emitters {sup 93}Ag and {sup 89}Rh are identified as primary candidates to be discovered.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantification of breast density with dual energy mammography: A simulation study

Breast density, the percentage of glandular breast tissue, has been identified as an important yet underutilized risk factor in the development of breast cancer. A quantitative method to measure breast density with dual energy imaging was investigated using a computer simulation model. Two configurations to measure breast density were evaluated: the usage of monoenergetic beams and an ideal detector, and the usage of polyenergetic beams with spectra from a tungsten anode x-ray tube with a detector modeled after a digital mammography system. The simulation model calculated the mean glandular dose necessary to quantify the variability of breast density to within (1/3)%. The breast was modeled as a semicircle 10 cm in radius with equal homogenous thicknesses of adipose and glandular tissues. Breast thicknesses were considered in the range of 2-10 cm and energies in the range of 10-150 keV for the two monoenergetic beams, and 20-150 kVp for spectra with a tungsten anode x-ray tube. For a 4.2 cm breast thickness, the required mean glandular doses were 0.183 {mu}Gy for two monoenergetic beams at 19 and 71 keV, and 9.85 {mu}Gy for two polyenergetic spectra from a tungsten anode at 32 and 96 kVp with beam filtrations of 50 {mu}m Rh and 300 {mu}m Cu for the low and high energy beams, respectively. The results suggest that for either configuration, breast density can be precisely measured with dual energy imaging requiring only a small amount of additional dose to the breast. The possibility of using a standard screening mammogram as the low energy image is also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chemical Hydrogen Storage Using Polyhedral Borane Anions and Aluminum-Ammonia-Borane Complexes

Phase 1. Hydrolysis of borohydride compounds offer the potential for significant hydrogen storage capacity, but most work to date has focused on one particular anion, BH4-, which requires high pH for stability. Other borohydride compounds, in particular polyhedral borane anions offer comparable hydrogen storage capacity without requiring high pH media and their long term thermal and hydrolytic stability coupled with non-toxic nature make them a very attractive alternative to NaBH4. The University of Missouri project provided the overall program focal point for the investigation of catalytic hydrolysis of polyhedral borane anions for hydrogen release. Due to their inherent stability, a transition metal catalyst was necessary for the hydrolysis of polyhedral borane anions. Transition metal ions such as cobalt, nickel, palladium and rhodium were investigated for their catalytic activity in the hydrolysis of nido-KB11H14, closo-K2B10H10, and closo-K2B12H12. The rate of hydrolysis follows first-order kinetics with respect to the concentration of the polyhedral borane anion and surface area of the rhodium catalyst. The rate of hydrolysis depends upon a) choice of polyhedral borane anion, c) concentration of polyhedral borane anion, d) surface area of the rhodium catalyst and e) temperature of the reaction. In all cases the yield of hydrogen was 100% which corresponds to ~7 wt% of hydrogen (based on material wt%). Phase 2. The phase 2 of program at the University of Missouri was focused upon developing aluminum ammonia-boranes (Al-AB) as chemical hydrogen storage materials, specifically their synthesis and studies of their dehydrogenation. The ammonia borane molecule (AB) is a demonstrated source of chemically stored hydrogen (19.6 wt%) which meets DOE performance parameters except for its regeneration from spent AB and elemental hydrogen. The presence of an aluminum center bonded to multiple AB residues might combine the efficiency of AB dehydrogenation with an aluminum mediated hydrogenation process leading to reversibility. The Al-AB complexes have comparable hydrogen capacity with other M-AB and have potential to meet DOE’s 2010 and 2015 targets for system wt%.

08 HYDROGEN↗

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Candidate multiple chiral doublets nucleus {sup 106}Rh in a triaxial relativistic mean-field approach with time-odd fields

The configuration-fixed constrained triaxial relativistic mean-field approach is extended by including time-odd fields and applied to the study of the candidate multiple chiral doublets (M{chi}D) nucleus {sup 106}Rh. The energy contribution from time-odd fields and microscopical evaluation of center-of-mass correction as well as the modification of triaxial deformation parameters {beta},{gamma} due to the time-odd fields are investigated. The contributions of the time-odd fields to the total energy are 0.1-0.3 MeV, and they modify slightly the {beta},{gamma} values. However, the previously predicted multiple chiral doublets still exist.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Characterization of a cold cathode Penning ion source for the implantation of noble gases beneath 2D monolayers on metals: Ions and neutrals

Argon ion kinetic energy spectra at different discharge voltages (between 480 and 600 V) of a commercial cold cathode ion source IQP10/63 are reported. The high kinetic energy cut-off depends on the discharge voltage and the corresponding plasma potential due to excess positive charges which is found to be about 136 V. Exposure of single layer hexagonal boron nitride on rhodium to the beam of the ion source leads to the formation of nanotents, i.e., stable atomic protrusions. A positive bias voltage is applied to the target sample to block the positive ions produced by the ion source. However, application of a positive bias potential (800 eV), which is higher than the kinetic energy cut-off, still allows the formation of nanotents and its observation with scanning tunneling microscopy. This indicates that the ion source also produces neutral atoms with kinetic energies higher than the penetration threshold across a single layer of hexagonal boron nitride.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence of high-pressure rhodium sesquioxide in the rhodium/gamma-alumina catalytic system

Abstract: We report an investigation of Rh-containing nanostructures dispersed on -alumina. This system is representative of many common heterogeneous catalysts that consist of transition metals dispersed on a high surface area support. Previous atomic-resolution Z-contrast STEM observations have shown the Rh particles to exist as thin rafts on the (100) surface of -alumina. This finding is intriguing given that the preferred surface exposure of -alumina is (110). Here we present first-principles density functional studies and simulated Z-STEM imaging suggesting that these Rh-containing structures consist of the high-pressure rhodium sesquioxide (II) phase growing on the surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗