Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RHENIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Single rhenium atoms on nanomagnetite: Probing the recharge process that controls the fate of rhenium in the environment

Understanding the redox transitions that control rhenium geochemistry is central to paleoredox and geochronology studies, as well as predicting the fate of chemically similar hazardous oxyanions in the environment such as pertechnetate. However, detailed mechanistic information regarding rhenium redox transitions in anoxic systems is scarce. Here, we performed a comprehensive laboratory study of rhenium redox transitions on variably oxidized magnetite nanoparticle surfaces. Through high-end spectroscopic and microscopic tools, we propose an abiotic transition pathway in which aqueous iron(II) ions in the presence of pure or preoxidized magnetite serve as an electron source to reduce rhenium(VII) to individual rhenium(IV) atoms or small polynuclear species on nanoparticle surfaces. Notably, iron(II) ions recharged preoxidized magnetite nanoparticles exhibit a maghemite core and a magnetite shell, challenging the traditional core-shell magnetite-maghemite model. This study provides a fundamental understanding of redox processes governing rhenium fate and transport in the environment and enables an improved basis for predicting its speciation in geochemical systems.

Science & Technology - Other Topics↗
DOE OSTI2025

Rhenium-Selenido Corroles: Reflections on 5d Metalloporphyrins and Metallocorroles as Triplet Emitters and Photosensitizers

Following the successful synthesis of rhenium-oxido, rhenium-imido, and rhenium-sulfido corroles, a series of para-X-substituted rhenium-selenido triarylcorroles (X = OCH 3 , CH 3 , H, F, CF 3 ) have been prepared in 70–76% yields. A one-pot, two-step procedure was used, analogous to that used for ReS corroles, involving rhenium insertion via high-temperature reaction of Re 2 (CO) 10 and free-base corroles in refluxing decalin, followed by exposure to PCl 3 (which is thought to deoxygenate ReO corroles formed under the reaction) and elemental selenium. An analogous procedure, however, failed to yield rhenium-tellurido corroles, presumably reflecting, according to DFT calculations, the limited stability of these species. Unlike ReO corroles, ReS and ReSe corroles were found not to exhibit phosphorescence in the NIR-I regime (600–1000 nm); nor did they sensitize singlet oxygen formation. In the hope of obtaining a broader perspective of this negative result, we also examined ReN porphyrins and found them not to phosphoresce or to sensitize singlet oxygen formation. These results were explained by DFT and TDDFT calculations in terms of low-energy triplet states, which are not energetic enough to excite molecular oxygen to its lowest singlet state. Whether some of the new Re corroles exhibit phosphorescence in the NIR-II regime remains an interesting question for future investigation.

Aromatic compounds↗
DOE OSTI2026

Ambient Aging of Epitaxial and Polycrystalline Rhenium Thin Films

Extending the lifetime of superconducting qubits requires materials that are resistant to surface oxide formation. Rhenium has emerged as one such promising material. Because grain boundaries can promote material degradation, this project compares epitaxial (single-crystal, no grain boundaries) and polycrystalline (many grain boundaries) rhenium thin films after three years of ambient environmental exposure. Epitaxial rhenium remained free of undesired particles, while polycrystalline rhenium developed higher-oxide surface particles. Epitaxial rhenium demonstrated greater resistance to aging and oxidation, making it a more promising candidate for superconducting qubits. Surface characterization using scanning electron microscopy, energy dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy revealed localized oxygen and nitrogen enrichment together with a Re⁷⁺ oxidation state in the polycrystalline surface particles, consistent with the proposed formation of ammonium perrhenate. Ongoing cleaning and XPS depth profiling will further determine the identity and origin of the surface crystallites.

Wiacek, Wiktoria [William Rainey Harper Coll.]↗
DOE OSTI2026

Ambient Aging of Epitaxial and Polycrystalline Rhenium Thin Films

Extending the lifetime of superconducting qubits requires materials that are resistant to surface oxidation. Rhenium has emerged as one such promising candidate that forms a sub-nanometer oxide. Grain boundaries are known to promote material degradation, and thus, we compare epitaxial (single crystal, no grain boundaries) and polycrystalline (many grain boundaries) rhenium thin films after three years of ambient environmental exposure. Epitaxial rhenium remained free of undesired particles, while polycrystalline rhenium developed surface oxide crystallites. Surface characterization using scanning electron microscopy, energy dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy reveals localized oxygen and nitrogen enrichment, together with a Re⁷⁺ oxidation state in the polycrystalline surface particles, consistent with the proposed formation of ammonium perrhenate. Epitaxial rhenium demonstrated greater resistance to aging and oxidation, making it a more promising candidate for superconducting qubits. Ongoing cleaning and XPS depth profiling will further determine the identity and origin of the surface crystallites.

Wiacek, Wiktoria [Fermilab]↗
DOE OSTI2026

Ambient Aging of Epitaxial and Polycrystalline Rhenium Thin Films

Extending the lifetime of superconducting qubits requires materials that are resistant to surface oxidation. Rhenium has emerged as one such promising candidate that forms a sub-nanometer oxide. Grain boundaries are known to promote material degradation, and thus we compared epitaxial (single crystal, no grain boundaries) and polycrystalline (many grain boundaries) rhenium thin films after three years of ambient environmental exposure. Epitaxial rhenium remained free of undesired particles, while polycrystalline rhenium developed surface oxide crystallites. Surface characterization using scanning electron microscopy, energy dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy reveals localized oxygen and nitrogen enrichment together with a Re⁷⁺ oxidation state in the polycrystalline surface particles, consistent with the proposed formation of ammonium perrhenate. Epitaxial rhenium demonstrated greater resistance to aging and oxidation, making it a more promising candidate for superconducting qubits. Ongoing cleaning and XPS depth profiling will further determine the identity and origin of the surface crystallites.

Wiacek, Wiktoria [William Rainey Harper Coll.]↗
DOE OSTI2024

Rhenium-Sulfido and -Dithiolato Corroles: Reflections on Chalcophilicity

The high-temperature (~180 °C) reaction between free-base meso-triarylcorroles and Re 2 (CO) 10 , followed by exposure to PCl 3 and thiols (or elemental sulfur), affords rhenium-sulfido (ReS) corroles in 67-76% yields. The use of shorter reaction times, lower temperatures (~130 °C), and a dithiol (e.g., ethane-1,2-dithiol) also allows the isolation of rhenium-dithiolato corroles, presumptive intermediates on the path to ReS corroles. The ReS corroles exhibit high thermal stability and two reversible oxidations and reductions in their cyclic voltammograms, with redox potentials nearly identical to those observed for analogous ReO corroles. The electrochemical HOMO-LUMO gaps of the complexes, at 2.2 eV, are consistent with ligand-centered oxidation and reduction. The UV-vis spectra of ReS corroles, on the other hand, differ significantly from those of their ReO counterparts. Scalar-relativistic DFT calculations suggest that this difference reflects low-energy LUMO+2 and LUMO+3 levels, consisting of Re-S π-antibonding interactions; the ReO corroles, in contrast, exhibit a larger LUMO+1/LUMO+2 gap, as expected for a relatively classical Gouterman-type metalloporphyrin analogue. The high stability of ReS corroles is consistent with geochemists' view of rhenium as a moderately chalcophilic element (i.e., one that partitions into sulfide melts) as well as with a recent quantitative analysis of thiophilicity, which indicates that rhenium's oxophilicity and thiophilicity are essentially evenly balanced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B 2 Dumbbells

Transition metal borides are known due to their attractive mechanical, electronic, refractive, and other properties. A new class of rhenium borides was identified by synchrotron single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells between 26 and 75 GPa. Recoverable to ambient conditions, compounds rhenium triboride (ReB 3 ) and rhenium tetraboride (ReB 4 ) consist of close-packed single layers of rhenium atoms alternating with boron networks built from puckered hexagonal layers, which link short bonded (~ 1.7 angstrom) axially oriented B 2 dumbbells. The short and incompressible Re-B and B-B bonds oriented along the hexagonal c-axis contribute to low axial compressibility comparable with the linear compressibility of diamond. Sub-millimeter samples of ReB 3 and ReB 4 were synthesized in a large-volume press at pressures as low as 33 GPa and used for material characterization. Crystals of both compounds are metallic and hard (Vickers hardness, H V = 34(3) GPa). Geometrical, crystal-chemical, and theoretical analysis considerations suggest that potential ReB x compounds with x > 4 can be based on the same principle of structural organization as in ReB 3 and ReB 4 and possess similar mechanical and electronic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic, Magnetic, and Computational Investigations on a Series of Rhenium(III) Cyclopentadienide β-diketiminate Halide and Pseudohalide Complexes

Here the low-valent rhenium(I) salt Na[Re(η 5 -Cp)(BDI)] (BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate) was shown to react with various halide and chalcogenolate reagents, leading to the isolation of a series of rhenium(III)-halide and -pseudohalide complexes: Re(X)(η 5 -Cp)(BDI) (1-X, X = F, Cl, Br, I; 2, X = OTf) and Re(ER)(η 5 -Cp)(BDI) (3-ER, ER = SBn, SeBn, TePh). The 1 H NMR spectra of these complexes displayed sharp resonances shifted several ppm from typical diamagnetic regions, as well as distinct chemical shift trends down both the halide (with the exception of F) and chalcogenolate series, with both Cp and BDI backbone peaks moving downfield with increasing atomic number. Subsequent magnetic susceptibility measurements of the rhenium(III) halides 1-Cl, 1-Br, and 1-I indicated that these complexes display temperature-independent paramagnetism (TIP), with χ TIP values of 7.41(44) × 10 -4 to 1.50(51) × 10 -3 cm 3 mol -1 . Multireference complete active space self-consistent field (CASSCF) computations incorporating spin-orbit state mixing revealed small energy separations (1.7-3.0 kcal/mol) between thermally isolated ground states and the first excited spin-orbit states for the rhenium halides, confirming that low-lying excited states are responsible for the observed TIP behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development of Quantum Computing Interconnect Based on Aerosol Jet Printing and Electrochemical Deposition of Rhenium

The electrodeposition of rhenium on to a metal seed layer on flexible substrates is presented as a means to creating superconducting flexible cable connectors in an enabling plug-and-play approach for quantum computing. Cryogenic quantum electronics are currently connected using masses of stainless-steel coaxial cables that are bulky, rigid - both in form and design - and lead to significant joule heating, thermal noise, and cross talk. Here, we present an unprecedented approach to integrate an aerosol jet printed (AJP) metal seed layer with rhenium electrodeposition on a flexible substrate in the advancement of superconducting interconnect technologies. Silver and gold were printed using the ‘Nanojet’ aerosol jet printer on Kapton films. Adhesion of gold was found to be far superior to that of silver and adhesion on roughened Kapton surpassed that of its smooth counterpart. Electrodeposition of rhenium was successful on both silver and gold and an amorphous Re film was confirmed by XRD. Results for both materials are presented however due to the poor adhesion of silver to Kapton it was ruled out as a viable candidate. Composite materials were characterized by profilometry, EDS, XRD and FIBSEM. Electrical measurements of the composite at ambient temperature showed a critical temperature (T c ), where the resistance drops to 0, of 5.8 K, well above 4.2 K, the temperature of liquid helium. Stress-strain tests of the Ag-Re and Au-Re composites on roughened and smooth Kapton were completed. Cyclic flexure testing (200 cycles) to 1.25% strain showed smooth Kapton samples reach a stress of ~16 MPa, while Kapton roughened with sandpaper, reaches ~20MPa of stress for the same 1.25% strain.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis and characterization of rhenium chalcogenides for nuclear waste management

A new synthetic approach to binary rhenium (Re) chalcogenides was investigated to aid in the preparation of analogous technetium (Tc) compounds for Tc waste management efforts. The Boron-Chalcogen Mixture (BCM) method was utilized for the first time to prepare polycrystalline powders of ReS 2 , ReSe 2 , and Re 2 Te 5 using a perrhenate, NaReO4, as a rhenium source. Single crystals of ReS 2 were also synthesized using the combined BCM and molten flux methods by adding a K 2 CO 3 flux to the reagent mixture. Thermal analysis using TGA/DSC revealed negligible changes from ambient temperature up to ∼300 °C followed by the oxidation of the Re chalcogenides. High Temperature PXRD was used to investigate the crystallinity of ReS 2 at various temperatures revealing an increase in crystallinity up to 275 °C followed by a decrease in crystallinity due to oxidation. The research presented herein demonstrates a significant step towards technetium waste treatment efforts.

Boron chalcogen mixture (BCM) method↗
DOE OSTI2025

A high-temperature heat flux sensor using the transverse Seebeck effect in elemental rhenium

Heat flux sensors compatible with hot environments are critical to advance aerospace, materials, and energy generation technologies that cope with extreme thermal conditions. In this work, we report on the development and characterization of a high-temperature heat flux sensor using the transverse Seebeck effect in rhenium single crystals. The sensor leverages refractory alloys and ceramics compatible with temperatures exceeding 1000 °C. The heat flux sensor was characterized from room temperature to 500 °C using a temperature-controlled calibration facility. At constant temperature, the sensor’s voltage output is linear with respect to the absorbed heat flux. The responsivity of the sensor varies with temperature, from 1.3 μV/(W/cm 2 ) at room temperature to −3.2 μV/(W/cm 2 ) at 500 °C, increasing monotonically in magnitude after changing sign from positive to negative at approximately 300 °C. The experimental results are in good agreement with analytical predictions of the sensor’s temperature-dependent responsivity, which suggest a further increase in magnitude up to −7.4 μV/(W/cm 2 ) at 1000 °C. These results highlight the unique characteristics of rhenium as a TSE transducer. The design offers compatibility with a wide range of operating temperatures and yields a measurement sensitivity that increases as the environmental conditions become more challenging.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Methane Generation from CO 2 with a Molecular Rhenium Catalyst

The atomic-level tunability of molecular structures is a compelling reason to develop homogeneous catalysts for challenging reactions such as the electrochemical reduction of carbon dioxide to valuable C 1 –C n products. Of particular interest is methane, the largest component of natural gas. Herein, we report a series of three isomeric rhenium tricarbonyl complexes coordinated by the asymmetric diimine ligands 2-(isoquinolin-1-yl)-4,5-dihydrooxazole ( quin-1-oxa ), 2-(quinolin-2-yl)-4,5-dihydrooxazole ( quin-2-oxa ), and 2-(isoquinolin-3-yl)-4,5-dihydrooxazole ( quin-3-oxa ) that catalyze the reduction of CO 2 to carbon monoxide and methane, albeit the latter with a low efficiency. To our knowledge, these complexes are the first examples of rhenium(I) catalysts capable of converting carbon dioxide into methane. Re(quin-1-oxa)(CO) 3 Cl ( 1 ), Re(quin-2-oxa)(CO) 3 Cl ( 2 ), and Re(quin-3-oxa)(CO) 3 Cl ( 3 ) were characterized and studied using a variety of electrochemical and spectroscopic techniques. In bulk electrolysis experiments, the three complexes reduce CO 2 to CO and CH 4 . When the controlled-potential electrolysis experiments are performed at -2.5 V (vs Fc +/0 ) and in the presence of the Brønsted acid 2,2,2-trifluoroethanol, methane is produced with turnover numbers that range from 1.3 to 1.8. Isotope labeling experiments using 13 CO 2 atmosphere produce 13 CH 4 ( m / z = 17) confirming that methane originates from CO 2 reduction. Theoretical calculations are performed to investigate the mechanistic aspects of the 8e – /8H + reduction of CO 2 to CH 4 . Overall, a ligand-assisted pathway is proposed to be an efficient pathway in the formation of CH 4 . Delocalization of the electron density on the (iso)quinoline moiety upon reduction stabilizes the key carbonyl intermediate leading to additional reactivity of this ligand. These results should aid the development of more robust catalytic systems that produce CH 4 from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Infrared Spectroelectrochemical Insights into Rhenium-Based Supramolecular Assemblies for Electron Storage and Transfer

Three supramolecular square assemblies featuring Re(CO)3Cl corners and monodentate pyridyl linkers [4,4′-bipyridine, (1a), pyrazine (2a), and 1,2-di(4-pyridyl)ethylene (3a), where a denotes the native state] were synthesized and studied via infrared spectroelectrochemistry (IR-SEC). IR-SEC revealed that the length of the bridging ligand and degree of electronic coupling in rhenium squares greatly impact the reduction pathway in both inert and CO2 atmospheres; notably, the squares are capable of interacting with CO2 after only ligand reduction, thereby avoiding the need for an additional reductive event to generate the rhenium anion. This mechanism differs from that of mononuclear complexes, highlighting how unique redox properties can be endowed by electronic coupling in supramolecular systems.

Koehne, Sydney Marie↗
DOE OSTI2021

Shear strength measurements and hydrostatic compression of rhenium diboride under high pressures

Shear strength measurements have been carried out on rhenium diboride, ReB 2 , to a pressure of 74 GPa using a Radial X-ray Diffraction (R-XRD) technique in a diamond anvil cell using platinum as an internal x-ray pressure standard. The R-XRD result has provided a unique insight into the deformation of hexagonal crystal lattice under non-hydrostatic compression and variation of shear strength with increasing pressure. From R-XRD data, we have estimated hydrostatic component of compression to determine an equation of state of rhenium diboride yielding a bulk modulus of K 0 = 366 ± 25 GPa with a pressure derivative $K^{'}_{0}$ = 4.3 ± 0.5 in good agreement with hydrostatic density functional theory calculations. Here, the average lower bound of shear strength (τ) from various diffraction planes was then calculated using the measured interplanar d-spacing (d m ) and hydrostatic component of d-spacing (d p ) to be shown to approach 6.7 ± 0.4 GPa at 70 GPa. Our results show that the anisotropic compression effects observed in ReB 2 under hydrostatic compression are correlated to electronic structure changes under compression as predicted by theoretical calculations.

36 MATERIALS SCIENCE↗