Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFRACTORY METAL COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Refractory-metal compound impregnation of polytetrafluoroethylene

Process impregnates polytetrafluoroethylene /PTFE/ with rhenium or molybdenum compounds. The refractory metals impregnated PTFE combines chemical inertness with electrical conductivity. They are useful for electro-chemical cells, chemical processing equipment, catalysts, electrostatic charge removal, RF gasketing, and cable shielding.

Leibecki, H. F.↗

Synthesis and structural analysis of Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7}, a new pyrochlore solid solution

This paper presents a study of the synthesis and structural properties of the new pyrochlore-type Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} series. Ten compositions with 0.0{<=}y{<=}0.9 were prepared by solid-state reaction with thermal treatments at 873, 1073 and 1323 K under atmospheric pressure conditions. Structural refinements from X-ray powder diffraction data by the Rietveld method show that all compounds of the Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} solid solution crystallize in a {alpha}-pyrochlore structure. The main structural difference when bismuth is substituted by strontium concerns the x position of the O1 (x, (1/8), (1/8)). This substitution significantly increases the Bi/Sr-O1 distance and diminishes the Ir-O1 distance; this implies that the Ir-O1-Ir bond angle increases. With the Sr substitution, the IrO{sub 6} local configuration goes from a flattened trigonal antiprism, y<0.5, to an elongated one, y>0.5, passing through an octahedral array, y{approx}0.5. The electrical consequences of these structural changes observed in this system are qualitatively explained with electronic structure calculations, this behavior agrees very well with those observed in other pyrochlore systems A{sub 2}M{sub 2}O{sub 7} (A=rare earth cations or Tl{sup +}, Pb{sup 2+}, or Bi{sup 3+}, and M=Ru or Ir). -- Graphical abstract: Electrical behavior of the Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} solid solution. Display Omitted Highlights: {yields} Bi{sub 2-y}Sr{sub y}Ir{sub 2}O{sub 7} crystallizes in the {alpha}-pyrochlore structure. {yields} Local geometry of Ir goes from a flattened trigonal antiprism to an elongated one. {yields} Electrical resistivity increases with the Sr content in the solid solution. {yields} Electronic structure analysis relates resistivity with Sr disorder and bond strength.

36 MATERIALS SCIENCE↗

Reactive oxygen species and oxidative DNA damage mediate the cytotoxicity of tungsten-nickel-cobalt alloys in vitro

Tungsten alloys (WA) have been introduced in an attempt to find safer alternatives to depleted uranium and lead munitions. However, it is known that at least one alloy, 91% tungsten-6% nickel-3% cobalt (WNC-91-6-3), causes rhabdomyosarcomas when fragments are implanted in rat muscle. This raises concerns that shrapnel, if not surgically removable, may result in similar tumours in humans. There is therefore a clear need to develop rapid and robust in vitro methods to characterise the toxicity of different WAs in order to identify those that are most likely to be harmful to human health and to guide development of new materials in the future. In the current study we have developed a rapid visual in vitro assay to detect toxicity mediated by individual WA particles in cultured L6-C11 rat muscle cells. Using a variety of techniques (histology, comet assay, caspase-3 activity, oxidation of 2'7'-dichlorofluorescin to measure the production of reactive oxygen species and whole-genome microarrays) we show that, in agreement with the in vivo rat carcinogenicity studies, WNC-91-6-3 was the most toxic of the alloys tested. On dissolution, it produces large amounts of reactive oxygen species, causes significant amounts of DNA damage, inhibits caspase-3, triggers a severe hypoxic response and kills the cells in the immediate vicinity of the alloy particles within 24 h. By combining these in vitro data we offer a mechanistic explanation of the effect of this alloy in vivo and show that in vitro tests are a viable alternative for assessing new alloys in the future.

60 APPLIED LIFE SCIENCES↗

Nonequivalent Yb{sup 3+} centres in Y{sub 1-x}Yb{sub x}Al{sub 3}(BO{sub 3}){sub 4} laser crystals

The absorption spectra of nonlinear laser crystals Y{sub 1-x}Yb{sub x}Al{sub 3}(BO{sub 3}){sub 4} grown from bismuth-lithium-molybdate and potassium-molybdate solution-melts are comparatively studied by high-resolution Fourier spectroscopy. The differences observed in the fine structure of the absorption spectra are correlated with the variations in the solution-melt composition and in the concentrations of bismuth and molybdenum impurities in the crystals. It is shown that the concentration of the molybdenum impurity (the main factor hindering lasing in the UV spectral region) in the single crystals grown from the bismuth-lithium-molybdate solutions is more than an order of magnitude smaller than in the crystals grown using the potassium-molybdate solution-melt. The described method can be used for express analysis of the quality of UV laser crystals and for improving the solution-melt technologies of growth of laser crystals and crystals used for generation of the fourth harmonic of Nd:YAG laser radiation. (active media)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermal crystal growth of the potassium niobate and potassium tantalate family of crystals

Single crystals of KNbO{sub 3} (KN), KTaO{sub 3} (KT), and KTa{sub 1-x}Nb{sub x}O{sub 3} (x=0.44, KTN) have been prepared by hydrothermal synthesis in highly concentrated KOH mineralizer solutions. The traditional problems of inhomogeneity, non-stoichiometry, crystal striations and crystal cracking resulting from phase transitions associated with this family compounds are minimized by the hydrothermal crystal growth technique. Crystals of good optical quality with only minor amounts of metal ion reduction can be grown this way. Reactions were also designed to provide homogeneous distribution of tantalum and niobium metal centers throughout the KTN crystal lattice to maximize its electro-optic properties. Synthesis was performed at relatively low (500-660 {sup o}C) temperatures in comparison to the flux and Czochralski techniques. This work represents the largest crystals of this family of compounds grown by hydrothermal methods to date. -- Graphical Abstract:

36 MATERIALS SCIENCE↗

Supported oxorhenate catalysts prepared by thermal spreading of metal Re{sup 0} for methanol conversion to methylal

TiO{sub 2}-anatase and SiO{sub 2} supported oxorhenate catalysts were prepared by an original and simple technique based on the oxidative dispersion of metallic rhenium under dry conditions. The dispersion process of the supported oxorhenate phase as a function of the rhenium coverage and the support properties are discussed on the base of in situ characterization. The structures of the as prepared catalysts were found to be comparable to those of materials prepared using the incipient wetness impregnation technique. The absence of water in the preparation technique has made it possible to highlight the role of the hydration level on the rhenium oxide volatilization. The as-prepared Re/TiO{sub 2} catalysts were found to be effective for the direct conversion of methanol to methylal. - Graphical Abstract: Evolution of the 900-1000 cm{sup -1} region of the Raman spectrum of a mixture of metal rhenium with anatase TiO{sub 2} K03 upon heating in pure O{sub 2}. Highlights: > Supported rhenium catalysts can be easily prepared from metal Re. > This dry process is mainly a CVD immediately followed by rhenium deposition. > Hydration of the oxorhenate phase is dependent on the support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the phase formation of sputtered hafnium oxide and oxynitride films

Hafnium oxynitride films are deposited from a Hf target employing direct current magnetron sputtering in an Ar-O{sub 2}-N{sub 2} atmosphere. It is shown that the presence of N{sub 2} allows for the stabilization of the transition zone between the metallic and the compound sputtering mode enabling deposition of films at well defined conditions of target coverage by varying the O{sub 2} partial pressure. Plasma analysis reveals that this experimental strategy facilitates control over the flux of the O{sup -} ions which are generated on the oxidized target surface and accelerated by the negative target potential toward the growing film. An arrangement that enables film growth without O{sup -} ion bombardment is also implemented. Moreover, stabilization of the transition sputtering zone and control of the O{sup -} ion flux without N{sub 2} addition is achieved employing high power pulsed magnetron sputtering. Structural characterization of the deposited films unambiguously proves that the phase formation of hafnium oxide and hafnium oxynitride films with the crystal structure of HfO{sub 2} is independent from the O{sup -} bombardment conditions. Experimental and theoretical data indicate that the presence of vacancies and/or the substitution of O by N atoms in the nonmetal sublattice favor the formation of the cubic and/or the tetragonal HfO{sub 2} crystal structure at the expense of the monoclinic HfO{sub 2} one.

36 MATERIALS SCIENCE↗

Oxide-metal compound ceramics.

Refractory oxide-metal joining and blend-uniting to produce compound ceramics of uniform or gradient composition

CERAMICS↗

Theoretical studies on the relationship between the thermionic work functions of refractory-metal intermetallic compounds and their electronic and crystal structures Final summary report

The Group VIA-Re binary systems are characterized by the presence of several intermediate phases. The u phase is present in all of the systems, but the a-Mn phases occur in only the Mo-Re and W-Re systems. The occurrence of these intermediate phases appears to be governed largely by electronic factors and is predictable on the basis of electron/atom ratio. The thermionic work functions of the intermediate phase materials were experimentally determined. function and the screening of the outermost electrons in the Group VIA metals was found. A correlation between the work As might be expected for purely metallic substances, the work functions were relatively high, in the range 4. 5 to 5. 0 eV, and in each case were bracketed by the work functions of the pure constituents. A discontinuous change in the average work function with composition is proposed, based on a thermodynamical treatment of the electron vapor.

REFRACTORY METAL↗

Preparation, crystal structure, and superconductive characteristics of new oxynitrides (Nb{sub 1-x}M{sub x})(N{sub 1-y}O{sub y}) where M=Mg, Si, and x{approx}y

New niobium oxynitrides containing either magnesium or silicon were prepared at 1000 deg. C by ammonia nitridation of oxide precursors obtained via the citrate route. The products had rock-salt type crystal structures. Crystallinity was improved by annealing in 0.5 MPa N{sub 2} and the final compositions were (Nb{sub 0.95}Mg{sub 0.05})(N{sub 0.92}O{sub 0.08}) at 1500 deg. C and (Nb{sub 0.87}Si{sub 0.09{open_square}0.04})(N{sub 0.87}O{sub 0.13}) at 1200 deg. C. The magnesium and oxide ions partially co-substitute the niobium and nitride ions in the octahedral sites of the {delta}-NbN lattice, respectively. Silicon ions were also successfully doped together with oxide ions into the rock-salt type NbN lattice. The Si doped product exhibited relatively large displacement at the octahedral sites and was accompanied by a small amount of cation vacancies. Superconductivity was improved by annealing to obtain critical temperatures/volume fractions of T{sub c}=17.6 K/100% for Mg- and T{sub c}=16.2 K/95% for the Si-doped niobium oxynitrides. - Graphical Abstract: Doped silicon ions substituting Nb in (Nb{sub 0.87}Si{sub 0.09{open_square}0.04})(N{sub 0.87}O{sub 0.13}) introduced a large displacement at the 4a site mainly because of the accompanied vacancy. The silicon ions may also be slightly shifted from the regular octahedral 4a site (green) towards the interstitial tetrahedral site (red) statistically in the rock-salt type lattice. Highlights: > New superconducting niobium oxynitrides containing either magnesium or silicon were prepared. > Their annealed products had chemical compositions of (Nb{sub 0.95}Mg{sub 0.05})(N{sub 0.92}O{sub 0.08}) and (Nb{sub 0.87}Si{sub 0.09{open_square}0.04})(N{sub 0.87}O{sub 0.13}) in the rock-salt type structure. > Their superconductivities were T{sub c}/volume fraction=17.6 K/100% and 16.2 K/95%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bixbyite- and anatase-type phases in the system Sc-Ta-O-N

The aim of our study was to modify the basis compound ss-TaON, which crystallizes in the monoclinic baddeleyite-type, by incorporation of appropriate dopant ions, in order to obtain anion-deficient cubic fluorite-type phases, which are of interest as solids with mobile nitrogen ions. For this purpose, scandium-doped tantalum oxide nitrides were prepared by ammonolysis of amorphous oxide precursors. An unexpected variety of phases with different structural features was observed: bixbyite-type phases of general composition Sc{sub x}Ta{sub 1-x}(O,N){sub y} with 0.33{<=}x{<=}1 and 1.7{<=}y{<=}1.9, yellow colored metastable anatase-type phases such as Sc{sub 0.1}Ta{sub 0.9}O{sub 1.2}N{sub 0.8} or Sc{sub 0.15}Ta{sub 0.85}O{sub 1.3}N{sub 0.7} and, additionally, anosovite-type phases Sc{sub x}Ta{sub 3-x}O{sub 2x}N{sub 5-2x} with 0{<=}x{<=}1.05. Selected phases were investigated by UV/vis spectroscopy. Anatase- and anosovite-type compounds show brilliant colors. In the anatase-type phase, a possible anion ordering was examined by theoretical methods. Additionally, energy calculations on phase stability were performed for Sc{sub x}Ta{sub 1-x}O{sub 1+2x}N{sub 1-2x} in the baddeleyite, rutile, and anatase structure types with varying amounts of dopants. - Graphical abstract: New anatase- and bixbyite-type phases obtained as single-phase samples in the system Sc-Ta-O-N.

36 MATERIALS SCIENCE↗

Production of High Purity Niobium Ingots at CBMM

CBMM is a fully integrated company, from the mine to the end line of the production chain, supplying different niobium products to the world market: ferroniobium, nickelniobium, niobium pentoxide and high purity metallic niobium. This high purity metallic niobium has long been known to exhibit superconductivity below 9.25 Kelvin. This characteristic has the potential to bring technological benefits for many different areas such as medicine, computing and environment. This paper presents the raw material requirements as well as CBMM experience on producing high purity niobium ingots. The results prove that CBMM material can be the best solution for special applications such as low cost superconductive radiofrequency cavities.

36 MATERIALS SCIENCE↗

CO{sub 2} reduction by group 6 transition metal suboxide cluster anions

Reactions between small group 6 transition metal suboxide clusters, M{sub x}O{sub y}{sup -} (M={sup 98}Mo or {sup 186}W; x=1-4; y{<=}3x) and both CO{sub 2} and CO were studied in gas phase using mass spectrometric analysis of high-pressure, fast flow reaction products. Both Mo{sub 2}O{sub y}{sup -} and W{sub 2}O{sub y}{sup -} show evidence of sequential oxidation by CO{sub 2} of the form, M{sub 2}O{sub y}{sup -}+CO{sub 2}{yields}M{sub 2}O{sub y+1}{sup -}+CO for the more reduced species. Similar evidence is observed for the trimetallic clusters, although Mo{sub 3}O{sub 6}{sup -} appears uniquely unreactive. Lower mass resolution in the M{sub 4}O{sub y}{sup -} range precludes definitive product mass assignments, but intensity patterns suggest the continued trend of sequential oxidation of the more reduced end of the M{sub 4}O{sub y}{sup -} oxide series. Based on thermodynamic arguments, cluster oxidation by CO{sub 2} is possible if D{sub 0}(O-Mo{sub x}O{sub y}{sup -})>5.45 eV. Although simple bond energy analysis suggests that tungsten oxides may be more reactive toward CO{sub 2} compared to molybdenum oxides, this is not born out experimentally, suggesting that the activation barrier for the reduction of CO{sub 2} by tungsten suboxide clusters is very high compared to analogous molybdenum suboxide clusters. In reactions with CO, suboxides of both metal-based oxides show CO addition, with the product distribution being more diverse for Mo{sub x}O{sub y}{sup -} than for W{sub x}O{sub y}{sup -}. No evidence of cluster reduction by CO is observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-dimensional WO{sub 3} and its hydrate: One-step synthesis, structural and spectroscopic characterization

We report on a one-step hydrothermal growth of one-dimensional (1D) WO{sub 3} nanostructures, using urea as 1D growth-directing agent and a precursor free of metals other than tungsten. By decreasing the pH of the starting solution, the size of the nanostructures was reduced significantly, this development being accompanied by the realization of phase pure hexagonal WO{sub 3} nanorods (elimination of monoclinic impurity phase) and a red shift in optical absorption edge. Surface analyses indicated the presence of reduced tungsten species in the WO{sub 3} nanostructures, which increased two-fold in a hydrated WO{sub 3} phase obtained with further decrease in pH. We suggest that oxygen vacancies are responsible for this defect state in WO{sub 3}, while protons are responsible or contribute significantly to the same in the hydrated phase. - Graphical abstract: The figure illustrates the role of pH in morphological and absorption edge evolution of WO{sub 3} (hydrate) as well as the variation in the concentration of defect electrons between anhydrous and hydrated WO{sub 3}. Highlights: Black-Right-Pointing-Pointer WO{sub 3} nanorods prepared in a one step procedure. Black-Right-Pointing-Pointer HCl (aq) enables phase pure WO{sub 3} nanorods. Black-Right-Pointing-Pointer HCl (aq) induces significant reduction in dimension of and red shift in absorption edge of nanorods. Black-Right-Pointing-Pointer W{sup 5+} detected in hydrothermal WO{sub 3} phase, the concentration of which increases in the hydrated phase. Black-Right-Pointing-Pointer W{sup 5+} from the two phases due to different positive defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ X-ray absorption spectroscopic investigation of the electrochemical conversion reactions of CuF{sub 2}-MoO{sub 3} nanocomposite

We have used X-ray absorption spectroscopy at the Cu K-edge to investigate the electrochemical conversion reaction of 20 nm size 85 wt% CuF{sub 2}-15 wt% MoO{sub 3} nanocomposite under in situ conditions. The nanocomposite was prepared by high energy milling. Upon discharge, the lithiation reaction with the nanocomposite resulted in the formation of nanophase metallic Cu, which is consistent with the conversion of CuF{sub 2} into Cu and LiF. Based on XANES and Fourier transforms of EXAFS spectra, we show that the discharge process proceeded via the formation of highly dispersed Cu particles. Based on the coordination number of the first shell of Cu, the average size of the Cu particles was estimated to be in the 1-3 nm range in the fully discharged state. -- Graphical Abstract: Comparison of Fourier transform of in situ Cu K-edge EXAFS spectra for a fully discharged CuF{sub 2{center_dot}}MoO{sub 3} nanocomposite in a nonaqueous Li cell with that of a Cu foil. Quantitative analysis of the Fourier transforms confirmed that the discharge mechanism for the nanocomposite proceeds via the reaction CuF{sub 2}+2Li{yields}Cu+2LiF. The discharge product of Cu is in the form of highly dispersed nanoparticles. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure of ultrathin heteroepitaxial superconducting YBa{sub 2}Cu{sub 3}O{sub 7-x} films

The atomic structures of ultrathin YBa{sub 2}Cu{sub 3}O{sub 7-x} (YBCO) films on SrTiO{sub 3}(001) (STO) and (La{sub x}Sr{sub 1-x})(Al{sub y}Ta{sub 1-y})O{sub 3}(001) (LSAT) were investigated with sub-Angstrom resolution using surface x-ray diffraction and the phase-retrieval direct-method difference map using the constraints of atomicity and film shift (DCAF). The model-independent electron densities which emerge from random initializations in DCAF are exceedingly stable. The films grow with a well-defined stacking sequence even when grown on substrates with mixed terrace termination. Only very minor out-of-plane deviations from bulk YBCO are observed in the film structures, although they are perfectly strained to the substrate and are therefore tetragonal. The films are superconducting, with critical temperatures for growth on STO and LSAT of 43 K and 70 K, respectively. These results have important implications for reliable structure determination of technologically relevant complex-metal oxide surfaces and interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Absence of the hyperfine magnetic field at the Ru site in ferromagnetic rare-earth intermetallics

The Moessbauer effect (ME) is frequently used to investigate magnetically ordered systems. One usually assumes that the magnetic order induces a hyperfine magnetic field, B{sub hyperfine}, at the ME active site. This is the case in the ruthenates, where the temperature dependence of B{sub hyperfine} at {sup 99}Ru sites tracks the temperature dependence of the ferromagnetic or antiferromagnetic order. However this does not happen in the rare-earth intermetallics, GdRu{sub 2} and HoRu{sub 2}. Specific heat, magnetization, magnetic susceptibility, Moessbauer effect, and neutron diffraction have been used to study the nature of the magnetic order in these materials. Both materials are found to order ferromagnetically at 83.1 and 15.3 K, respectively. Despite the ferromagnetic order of the rare-earth moments in both systems, there is no evidence of a correspondingly large B{sub hyperfine} in the Moessbauer spectrum at the Ru site. Instead the measured spectra consist of a narrow peak at all temperatures which points to the absence of magnetic order. To understand the surprising absence of a transferred hyperfine magnetic field, we carried out ab initio calculations which show that spin polarization is present only on the rare-earth site. The electron spin at the Ru sites is effectively unpolarized and, as a result, B{sub hyperfine} is very small at those sites. This occurs because the 4d Ru electrons form broad conduction bands rather than localized moments. These 4d conduction bands are polarized in the region of the Fermi energy and mediate the interaction between the localized rare-earth moments.

36 MATERIALS SCIENCE↗