Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECIPROCATING ENGINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Modular instrumentation system for real-time measurements and control on reciprocating engines

An instrumentation system was developed for reciprocating engines. Among the parameters measured are the indicated mean effective pressure, or theoretical work per cycle, and the mass fraction burn rate, a measure of the combustion rate in the cylinder. These computations are performed from measured cylinder pressure and crankshaft angle and are available in real time for the experimenter. A 100 or 200 consecutive-cycle sample is analyzed to reduce the effect of cyclic variations in the engine. Data are displayed in bargraph form, and the mean and standard deviation are computed. Other instruments are also described.

Rice, W. J.↗
NASA NTRS1981

Flight test method for the determination of reciprocating engine cooling requirements

It is pointed out that the effective cooling of aircraft reciprocating engines is still a problem area for the general aviation industry. Miley et al. (1981) have reported the results of an investigation of problems associated with cooling and installation aerodynamics. A description is given of a flight test procedure which was developed in connection with the considered investigation. It is shown that the test procedure provides valid cooling requirements data for a particular installation. The data are in terms of easily measurable parameters. The employment of the test procedure, which is based on the NACA cooling correlation method, can lead to more effective cooling installations and the solution of existing cooling problems.

Miley, S. J.↗
NASA NTRS1978

Simpler valve for reciprocating engines

Simpler design eliminating camshafts, cams, and mechanical springs should improve reliability of hydrazine powered reciprocating engines. Valve is expected to improve efficiency, and reduce weight of engines in range up to 50 horsepower.

Akkerman, J. W.↗
NASA NTRS1984

Practical flight test method for determining reciprocating engine cooling requirements

It is pointed out that efficient and effective cooling of air-cooled reciprocating aircraft engines is a continuing problem for the general aviation industry. Miley et al. (1981) have reported results of a study regarding the controlling variables for cooling and installation aerodynamics. The present investigation is concerned with experimental methods which were developed to determine cooling requirements of an instrumented prototype or production aircraft, taking into account a flight test procedure which has been refined and further verified with additional testing. It is shown that this test procedure represents a straightforward means of determining cooling requirements with minimal instrumentation. Attention is given to some background information, the development history of the NACA cooling correlation method, and the proposed modification of the NACA cooling correlation.

Ward, D. T.↗
NASA NTRS1979

Hydrazine monopropellant reciprocating engine development

A hydrazine fueled piston engine for providing 11.2 kW was developed to satisfy the need for an efficient power supply in the range from 3.7 to 74.6 kW where existing nonair-breathing power supplies such as fuel cells or turbines are inappropriate. The engine was developed for an aircraft to fly to 21.3 km and above and cruise for extended periods. A remotely piloted aircraft and the associated flight control techniques for this application were designed. The engine is geared down internally (2:1) to accommodate a 1.8 m diameter propeller. An alternator is included to provide electrical power. The pusher-type engine is mounted onto the aft closure of the fuel tank, which also provides mounting for all other propulsion equipment. About 20 hrs of run time demonstrated good efficiency and adequate life. One flight test to 6.1 km was made using the engine with a small fixed-pitch four-bladed propeller. The test was successful in demonstrating operational characteristics and future potential.

Akkerman, J. W.↗
NASA NTRS1979

Hydrazine monopropellant reciprocating engine development

A hydrazine-fueled piston-type engine for providing 11.2 kW (15 hp) has been developed to satisfy the need for an efficient power supply in the range from 3.7 to 74.6 kW (5 to 100 hp) where existing nonair-breathing power supplies such as fuel cells or turbines are inappropriate. The engine was developed for an aircraft to fly to 21.3 km (70,000 ft) and above and cruise for extended periods. The NASA Hugh L. Dryden Flight Research Center developed a remotely piloted aircraft and the associated flight control techniques for this application. About 20 hr of run time have demonstrated good efficiency and adequate life. One flight test to 6.1 km (20,000 ft) has been made using the engine with a small fixed-pitch four-bladed propeller. The test was successful in demonstrating operational characteristics and future potential.

Akkerman, J. W.↗
NASA NTRS1981

Reciprocating engines

An intake valve arrangement for positively controlling the opening and closing of the poppet valve in a hot gas cylinder in a hydrazine powered engine is described. The poppet valve is operated by the piston and gas pressure only. The poppet valve uses a pneumatic spring which holds the poppet valve against the piston while the valve is opened and closed. To accomplish this, a poppet valve is slidably mounted in a pneumatic spring chamber which reaches a pressure approaching the gas supply pressure and, during the opening of the valve, the spring chamber retains enough pressure to hold the poppet valve onto the piston. In addition, the bottom of the poppet valve can have a suction cup type configuration to hold the poppet valve on the piston during the down stroke.

Akkerman, J. W.↗
NASA NTRS1981

Preliminary study of temperature measurement techniques for Stirling engine reciprocating seals

Methods of determining the contact surface temperature in reciprocating seals are investigated. Direct infrared measurement of surface temperatures of a rod exiting a loaded cap seal or simulated seal are compared with surface thermocouple measurements. Significant cooling of the surface requires several milliseconds so that exit temperatures may be considered representative of internal contact temperatures.

Wilcock, D. F.↗
NASA NTRS1983

Computed and measured turbulence in axisymmetric reciprocating engines

The turbulent flowfield of a spark-ignition engine affects strongly the combustion characteristics of the engine. The flowfield depends on the design of the combustion chamber and the intake system. The present investigation is concerned with the effect of chamber design, and engine operating conditions on top dead center turbulence prior to ignition. It is shown that many of the trends which were identified in earlier studies can be obtained from a single model. The employed model takes into account a two-dimensional axisymmetric flowfield. Attention is given to governing equations, boundary and initial conditions, a comparison of the computed results with measurements, and the effect of swirl and squish.

Grasso, F.↗