Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “QUENCHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Analysis of iron-chromium-aluminum samples exposed to accident conditions followed by quench in the QUENCH-19 experiment

The QUENCH-19 experiment was a first-of-its-kind full-bundle test simulating accident conditions followed by water quench on accident-tolerant fuel (ATF) cladding. Here, a type of FeCrAl(Y) alloy, B136Y3, was developed at Oak Ridge National Laboratory and tested at the Karlsruhe Institute of Technology using Kanthal APM corner rods, a shroud, and Kanthal AF spacer grids. Testing conditions were similar to those in QUENCH-15—which tested ZIRLO cladding behavior—so that B136Y3 and ZIRLO cladding could be compared. QUENCH-19 consisted of an initial pre-oxidation heating followed by a transient. Then, a maximum power hold, which was not present in QUENCH-15, was executed to extend the heating period for the FeCrAl(Y) rods. Finally, a rapid water quench was executed that was similar to emergency core coolant system (ECCS) actuation. Compared with the ZIRLO rods in QUENCH-15, the bundle in QUENCH-19 released significantly less H 2 (9.2 g vs. 47.6 g) and achieved a much lower maximum temperature (1455°C vs. 1880°C). Furthermore, no breakaway oxidation was observed in QUENCH-19. Metallographic mounts revealed that despite the symmetry of the setup, at elevations near the maximum temperature, cladding and thermocouples were heavily damaged, substantial melting and oxidation occurred, and the cladding underwent chemical interaction with the thermocouple sheaths. Additionally, the ZrO 2 spacers detrimentally interacted with the cladding, leading to mixed oxide debris and the full destruction of some rods. Additional failure was found in certain cooler rods that may have risen due to the high thermal expansion coefficient of FeCrAl alloys. This paper presents an analysis of this work, which suggests that FeCrAl cladding can chemically survive anticipated loss-of-coolant accident events followed by rapid ECCS quench if the correct geometry and core design are present.

36 MATERIALS SCIENCE↗
DOE OSTI2020

“Mirror” magnet experiment for quench studies, quench analysis techniques development and in support of superconducting magnet modeling

In order to progress on various research points related to superconducting magnets, we suggest performing series of tests with induced and natural quenches on a mirror magnet, probably using a “11 T” coil. The “mirror” is to have voltage taps instrumented on half the strands, on both coil ends. It is to be instrumented with multiple spot-heaters, of the order of ten, in designated pole-turn areas. Instrumentation is to include quench antenna array facing the inner coil surface, as well as acoustic sensors on the inner layer pole. Further, acoustic sensors at the magnet ends and an acoustic calibration transducer are to be installed. Thus, we are to test sensitivity and precision of acoustic and quench antenna (QA) array sensors, both at close proximity to the coil, and we are to test and commission acoustic on-magnet real-time “calibration”. New or extended DAQ will be tested as well. In addition to diagnostic development, the purpose of the magnet experiment is to investigate current redistribution in the coil, both during quenching and in operating conditions; to assess voltage build up across strands and in the coil segments during quenching, to explore voltage signature differentiation between different type of quenches; to improve modeling of processes during quenching and for magnet design purposes. In this experiment, we expect to be able to characterize the processes during a quench in unprecedented details.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

13 C-Isotope-Assisted Assessment of Metabolic Quenching During Sample Collection from Suspension Cell Cultures

Metabolomics and fluxomics are core approaches to directly profile and interrogate cellular metabolism in response to various genetic or environmental perturbations. In order to accurately measure the abundance and isotope enrichment of intracellular metabolites, cell culture samples must be rapidly harvested and cold-quenched to preserve the in vivo metabolic state of the cells at the time of sample collection. When dealing with suspension cultures, this process is complicated by the need to separate the liquid culture media from cellular biomass prior to metabolite extraction. Here, we examine the efficacy of several commonly used metabolic quenching methods, using the model cyanobacterium Synechocystis sp. PCC 6803 as an example. Multiple 13 C-labeled compounds, including 13 C-bicarbonate, 13 C-glucose and 13 C-glutamine, were used as tracers during the sample collection and cold-quenching process to assess the extent of metabolic turnover after cells were harvested from culture flasks. We show that the combination of rapid filtration followed by 100% cold (–80°C) methanol quenching exhibits the highest quenching efficiency, while mixing cell samples with a partially frozen 30% methanol slurry (–24°C) followed by centrifugation is slightly less effective at quenching metabolism but enables less laborious sample processing. By contrast, rapidly mixing the cells with a saline ice slurry (~0°C) is less effective as indicated by high isotope-labeling rates after sample harvest, while mixing the cells with 60% cold methanol (–65°C) prior to centrifugation causes significant metabolite loss. Furthermore, this study demonstrates a rigorous, quantitative, and broadly applicable method for assessing the metabolic quenching efficacy of protocols used for sample collection in metabolomics and fluxomics studies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

What drives galaxy quenching? A deep connection between galaxy kinematics and quenching in the local Universe

ABSTRACT We develop a 2D inclined rotating disc model, which we apply to the stellar velocity maps of 1862 galaxies taken from the MaNGA survey (SDSS public Data Release 15) . We use a random forest classifier to identify the kinematic parameters that are most connected to galaxy quenching. We find that kinematic parameters that relate predominantly to the disc (such as the mean rotational velocity) and parameters that characterize whether a galaxy is rotation- or dispersion-dominated (such as the ratio of rotational velocity to velocity dispersion) are not fundamentally linked to the quenching of star formation. Instead, we find overwhelmingly that it is the absolute level of velocity dispersion (a property that relates primarily to a galaxy’s bulge/spheroidal component) that is most important for separating star-forming and quenched galaxies. Furthermore, a partial correlation analysis shows that many commonly discussed correlations between galaxy properties and quenching are spurious, and that the fundamental correlation is between quenching and velocity dispersion. In particular, we find that at fixed velocity dispersion, there is only a very weak dependence of quenching on the disc properties, whereby more discy galaxies are slightly more likely to be forming stars. By invoking the tight relationship between black hole mass and velocity dispersion, and noting that black hole mass traces the total energy released by active galactic nuclei (AGNs), we argue that these data support a scenario in which quenching occurs by preventive feedback from AGNs. The kinematic measurements from this work are publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

On the mechanical behavior of a Nb 3 Sn superconducting coil during a quench: Two-dimensional finite element analysis of a quench heater protected magnet

New high-field accelerator magnets based on $Nb_3Sn$ superconductors are pushing the boundaries of magnet design and quench protection towards new limits. While their large stored energies and current densities result in a very challenging scenario for magnet protection, their great electromagnetic forces create also new requirements in terms of magnet design and stress management techniques. Furthermore, the strain sensitivity of $Nb_3Sn$ cables turns the electro-mechanical limits of the conductor into a parameter of the highest importance, where conductor degradation becomes a critical aspect in magnet operation. The coupling of all the above-mentioned considerations during quench is a case of special interest that adds further complexity to the design of $Nb_3Sn$ magnets. The objective of this paper is to provide a complete two-dimensional investigation of the coil and magnet structure mechanics during a quench event. Here, the analysis is performed using a combination of finite element codes that provide the necessary input for the mechanical study. The core of the modelling strategy relies on a thermal-electric model, whose results are directly used as loads in the mechanical simulation. In doing so, the stress evolution during and after a quench is obtained. We focus for this time in the analysis of a quench heater protected magnet, where dynamic effects are of less importance in contrast to other protection systems like CLIQ.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Light yield quenching and quenching remediation in liquid scintillator detectors

Quenching of light emission from an LAB based scintillator by the addition of organic amines and carboxylic acids is examined. Chemical functional groups of the quenching agents play an important role in this reduction. It is shown that "salt" formation at a 1:1 mole ratio in a mixed amine-acid system, reduces quenching by a factor of ~ 2. Supporting NMR spectra are presented. Finally, this "quenching neutralization" has the potential to reduce the light loss incurred when metals complexed with quenching agents are loaded into organic scintillators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Antisolvent‐Mediated Air Quench for High‐Efficiency Air‐Processed Carbon‐Based Planar Perovskite Solar Cells

Perovskite solar cells (PSCs) have becoma a leading low‐cost photovoltaic technology, achieving power conversion efficiencies (PCEs) of up to 26.1%. However, their commercialization is hindered by stability issues and the need for controlled processing environments. Carbon‐electrode‐based PSCs (C‐PSCs) offer enhanced stability and cost‐effectiveness compared to traditional metal‐electrode PSCs, i.e., Au and Ag. However, processing challenges persist, particularly in air conditions where moisture sensitivity poses a significant hurdle. Herein, a novel air processing technique is presented for planar C‐PSCs that incorporates antisolvent vapors, such as chlorobenzene, into a controlled air‐quenching process. This method effectively mitigates moisture‐induced instability, resulting in champion PCEs exceeding 20% and robust stability under ambient conditions. The approach retains 80% of initial efficiency after 30 h of operation at maximum power point without encapsulation. This antisolvent‐mediated air‐quenching technique represents a significant advancement in the scalable production of C‐PSCs, paving the way for future large‐scale deployment.

14 SOLAR ENERGY↗
DOE OSTI2024

Reductive Dynamic and Static Excited State Quenching of a Homoleptic Ruthenium Complex Bearing Aldehyde Groups

A new homoleptic Ru polypyridyl complex bearing two aldehyde groups on each bipyridine ligand, [Ru(dab) 3 ](PF 6 ) 2 , where dab is 4,4′-dicarbaldehyde-2,2′-bipyridine, was synthesized, characterized, and utilized for iodide photo-oxidation studies. In acetonitrile (CH 3 CN) solution, the complex displayed an intense metal-to-ligand charge transfer (MLCT) absorbance maximum at 475 nm (ε = 22,000 M –1 cm –1 ) and an infrared (IR) band at 1712 cm –1 assigned to the pendent aldehyde groups. Visible light excitation in air-saturated solution resulted in room temperature photoluminescence (PL) with a maximum at 675 nm, a quantum yield, ϕ PL = 0.048, and an excited state lifetime, τ ο = 440 ns, from which radiative and nonradiative relaxation rate constants were extracted, k r = 9.1 × 10 4 s –1 and knr = 1.8 × 10 6 s –1 . Pulsed visible light excitation yielded transient UV–vis and IR absorption spectra consistent with an MLCT excited state; relaxation occurred with the maintenance of two isosbestic points in the visible region, and a lifetime that agreed with that measured by time-resolved PL. Cyclic voltammetry studies in a CH 3 CN solution with 0.1 M TBAPF 6 electrolyte revealed a quasi-reversible oxidation, E°(Ru III/II ) = +1.25 V vs. Fc +/0 , and three sequential one-electron reductions at −1.10, −1.25, and −1.54 V vs. Fc +/0 . Here, an excited state reduction potential of E°(Ru *2+/+ ) = +0.89 V vs. Fc +/0 was estimated with the Rehm–Weller expression. Titration of tetrabutylammonium iodide, TBAI, into a CD 3 CN solution of [Ru(dab) 3 ](PF 6 ) 2 resulted in significant shifts in the aldehyde H atom and 3,3′-biypridyl resonances that were analyzed with a 1:1 equilibrium model, from which K eq = 460 M –1 was extracted, increasing to 5800 M –1 when the solvent was changed to acetone-d 6 . Iodide titrations resulted in a significant quenching of the [Ru(dab) 3 ] *2+ lifetime and quantum yield in both CH 3 CN and acetone solvents. In CH 3 CN, the quenching was mainly dynamic and well described by the Stern–Volmer model, from which a quenching rate constant, k q , of 4.5 × 10 10 M –1 s –1 and an equilibrium constant, K eq , of 8.3 × 10 3 M –1 were obtained. In acetone, the static quenching pathway by iodide was greatly enhanced, with a K eq of 1.2 × 10 4 M –1 and a higher k q of 9.2 × 10 10 M –1 s –1 .

Aldehydes↗
DOE OSTI2022

Programmable heating and quenching for efficient thermochemical synthesis

Conventional thermochemical syntheses by continuous heating under near-equilibrium conditions face critical challenges in improving the synthesis rate, selectivity, catalyst stability and energy efficiency, owing to the lack of temporal control over the reaction temperature and time, and thus the reaction pathways. As an alternative, we present a non-equilibrium, continuous synthesis technique that uses pulsed heating and quenching (for example, 0.02 s on, 1.08 s off) using a programmable electric current to rapidly switch the reaction between high (for example, up to 2,400 K) and low temperatures. The rapid quenching ensures high selectivity and good catalyst stability, as well as lowers the average temperature to reduce the energy cost. Using CH4 pyrolysis as a model reaction, our programmable heating and quenching technique leads to high selectivity to value-added C2 products (>75% versus <35% by the conventional non-catalytic method and versus <60% by most conventional methods using optimized catalysts). Our technique can be extended to a range of thermochemical reactions, such as NH 3 synthesis, for which we achieve a stable and high synthesis rate of about 6,000 μmol g Fe –1 h –1 at ambient pressure for >100 h using a non-optimized catalyst. Furthermore, this study establishes a new model towards highly efficient non-equilibrium thermochemical synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quench conditioning device. Vibrational quench conditioning

Recently a new type of device, capacitor-based, aiming to eliminate or reduce superconducting magnet training was developed and tested at FNAL. I’ll review its main characteristics and principles of operation, make relevant comparisons and conclusions. Separately, I’ll discuss somewhat similar concepts based on induced vibrations in magnets, but I’ll extend this topic to cover both training reduction and quench protection. Those will be discussed at conceptual level, arguing about feasibility of such an approach and the need for more focused research on the topic, including simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Reconstructing thermal quantum quench dynamics from pure states

Simulating the nonequilibrium dynamics of thermal states is a fundamental problem across scales from high-energy to condensed-matter physics. Quantum computers may provide a way to solve this problem efficiently. Preparing a thermal state on a quantum computer is challenging, but there exist methods to circumvent this by computing a weighted sum of time-dependent matrix elements in a convenient basis. Further, while the number of basis states can be large, in this paper we show that it can be reduced by simulating only the largest density matrix elements by weight, capturing the density matrix to a specified precision. Leveraging Hamiltonian symmetries enables further reductions. This approach paves the way to more accurate thermal-state dynamics simulations on near-term quantum hardware.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

A Quench Detection and Monitoring System for Superconducting Magnets at Fermilab

A quench detection system was developed for protecting and monitoring the superconducting solenoids for the Muon-to-Electron Conversion Experiment (Mu2e) at Fermilab. The quench system was designed for a high level of dependability and long-term continuous operation. It is based on three tiers: Tier-I, FPGA-based Digital Quench Detection (DQD); Tier-II, Analog Quench Detection (AQD); and Tier-3, the quench controls and data management system. The Tier-I and Tier-II are completely independent and fully redundant systems. The Tier-3 system is based on National Instruments (NI) C-RIO and provides the user interface for quench controls and data management. It is independent from Tiers I & II. The DQD provides both quench detection and quench characterization (monitoring) capability. Both DQD and AQD have built-in high voltage isolation and user programmable gains and attenuations. The DQD and AQD also includes user configured current dependent thresholding and validation times. A 1 st article of the three-tier system was fully implemented on the new Fermilab magnet test stand for the HL-LHC Accelerator Up-grade Project (AUP). It successfully provided quench protection and monitoring (QPM) for a cold superconducting bus test in November 2020. The Mu2e quench detection design has since been implemented for production testing of the AUP magnets. A detailed description of the system along with results from the AUP superconducting bus test will be presented.

monitoring↗
DOE OSTI2022

Quenching time-scales in the IllustrisTNG simulation

ABSTRACT The time-scales for galaxy quenching offer clues to its underlying physical drivers. We investigate central galaxy quenching time-scales in the IllustrisTNG 100-1 simulation, their evolution over time, and the pre-quenching properties of galaxies that predict their quenching time-scales. Defining quenching duration τq as the time between crossing specific star formation rate (sSFR) thresholds, we find that ${\sim} 40{{\ \rm per\ cent}}$ of galaxies quench rapidly with τq < 1 Gyr, but a substantial tail of galaxies can take up to 10 Gyr to quench. Furthermore, 29 per cent of galaxies that left the star-forming main sequence (SFMS) more than 2 Gyr ago never fully quench by z = 0. While the median τq is fairly constant with epoch, the rate of galaxies leaving the SFMS increases steadily over cosmic time, with the rate of slow quenchers being dominant around z ∼ 2–0.7. Compared to fast quenchers (τq < 1 Gyr), slow-quenching galaxies (τq > 1 Gyr) were more massive, had more massive black holes, had larger stellar radii, and accreted gas with higher specific angular momentum (AM) prior to quenching. These properties evolve little by z = 0, except for the accreting gas AM for fast quenchers, which reaches the same high AM as the gas in slow quenchers. By z = 0, slow quenchers also have residual star formation in extended gas rings. Using the expected relationship between stellar age gradient and τq for inside-out quenching we find agreement with Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) integral field unit (IFU) observations. Our results suggest the accreting gas AM and potential well depth determine the quenching time-scale.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Unraveling the Luminescence Quenching Mechanism in Strong and Weak Quantum-Confined CsPbBr 3 Triggered by Triarylamine-Based Hole Transport Layers

Luminescence quenching by hole transport layers (HTLs) is one of the major issues in developing efficient perovskite light-emitting diodes (PeLEDs), particularly prominent in blue-emitting devices. While a variety of material systems have been used as interfacial layers, the origin of such quenching and the type of interactions between perovskites and HTLs are still ambiguous. Here, we present a systematic investigation of the luminescence quenching of CsPbBr 3 by a commonly employed hole transport polymer, Poly(9,9-dioctylfluorene-alt-N-(4-sec-butylphenyl)-diphenylamine) (TFB) in LEDs. Strong and weakly quantum-confined CsPbBr 3 (nanoplatelets (NPLs)/nanocrystals (NCs)) are rationally selected to study the quenching mechanism by considering the differences in their morphology, energy level alignments, and quantum confinement. The steady-state and time-resolved Stern-Volmer plots unravel the dominance of dynamic and static quenching at lower and higher concentrations of TFB, respectively, with maximum quenching efficiency of 98%. The quenching rate in NCs is faster than in NPLs owing to their longer PL lifetimes and weak quantum confinement. The ultrafast transient absorption results support these dynamics and rule out the involvement of Forster or Dexter energy transfer. Finally, the 1D 1 H and 2D NOESY NMR study confirms the exchange of native ligands at the NCs surface with TFB, leading to dark CsPbBr 3 -TFB ensemble formation accountable for luminescence quenching. This highlights the critical role of the triarylamine functional group on TFB (also the backbone of many HTLs) in the quenching process. These results shed light on the underlying reasons for the luminescence quenching in PeLEDs and will help to choose the interfacial layers rationally for developing efficient LEDs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗