SEARCH · Engineering Papers

Results for “Process settings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2023

NSO Processing Scripts (NSO wind loading data set processing scripts) [SWR-23-86]

NREL conducted comprehensive field measurements of the atmospheric turbulent wind conditions and the resulting structural wind loads on parabolic troughs at the Nevada Solar One plant from October 2021 to June, 2023. The measurement set-up included meteorological masts and structural load sensors on four trough rows. Additionally, NREL commissioned a lidar scanning the horizontal plane over the trough field. The high-resolution data set, characterizing the complex flow field and resulting structural loads, is available at https://data.openei.org/submissions/5938. The processing routines published here were used to create the data from the instruments' raw data.

Egerer, Ulrike↗

NASA NTRS1975

Set processing in a network environment

A combination of a local network, a mass storage system, and an autonomous set processor serving as a data/storage management machine is described. Its characteristics include: content-accessible data bases usable from all connected devices; efficient storage/access of large data bases; simple and direct programming with data manipulation and storage management handled by the set processor; simple data base design and entry from source representation to set processor representation with no predefinition necessary; capability available for user sort/order specification; significant reduction in tape/disk pack storage and mounts; flexible environment that allows upgrading hardware/software configuration without causing major interruptions in service; minimal traffic on data communications network; and improved central memory usage on large processors.

Hardgrave, W. T.↗

DOE OSTI2022

Techniques for collective operations in distributed systems

Various embodiments are generally directed to techniques for collective operations among compute nodes in a distributed processing set, such as by utilizing ring sets and local sets of the distributed processing set. In some embodiments, a ring set may include a subset of the distributed processing set in which each compute node is connected to a network with a separate router. In various embodiments, a local set may include a subset of the distributed processing set in which each compute node is connected to a network with a common router. In one or more embodiments, each compute node in a distributed processing set may belong to one ring set and one local set.

Langer, Akhil↗

NASA NTRS1990

Method of up-front load balancing for local memory parallel processors

In a parallel processing computer system with multiple processing units and shared memory, a method is disclosed for uniformly balancing the aggregate computational load in, and utilizing minimal memory by, a network having identical computations to be executed at each connection therein. Read-only and read-write memory are subdivided into a plurality of process sets, which function like artificial processing units. Said plurality of process sets is iteratively merged and reduced to the number of processing units without exceeding the balance load. Said merger is based upon the value of a partition threshold, which is a measure of the memory utilization. The turnaround time and memory savings of the instant method are functions of the number of processing units available and the number of partitions into which the memory is subdivided. Typical results of the preferred embodiment yielded memory savings of from sixty to seventy five percent.

Baffes, Paul Thomas↗

NASA NTRS1992

Stimulated electronic transition concept for an erasable optical memory

A new concept for an erasable optical memory is demonstrated using stimulated electronic transition (SET). Large bandgap semiconductors are suitable materials for the SET medium. The properties of MgS:Eu,Sm and SrS:Eu,Sm as possible media for the SET process are investigated. Quantum storage is achieved in the form of charges in deep levels in the medium and stimulated radiative recombination is used as the reading process. Unlike magneto-optic (M-O) and phase change (PC) processes, optical writing, reading and erasing are achieved without localized heating. The SET process will have an inherently faster data transfer rate and a higher storage density, and the medium will be more durable than the M-O and PC media. A possible application of the SET process in neural networks is also discussed.

Albin, Sacharia↗

NASA NTRS1992

Intelligent process mapping through systematic improvement of heuristics

The present system for automatic learning/evaluation of novel heuristic methods applicable to the mapping of communication-process sets on a computer network has its basis in the testing of a population of competing heuristic methods within a fixed time-constraint. The TEACHER 4.1 prototype learning system implemented or learning new postgame analysis heuristic methods iteratively generates and refines the mappings of a set of communicating processes on a computer network. A systematic exploration of the space of possible heuristic methods is shown to promise significant improvement.

Ieumwananonthachai, Arthur↗

NASA NTRS1995

Setting priorities for space research: An experiment in methodology

In 1989, the Space Studies Board created the Task Group on Priorities in Space Research to determine whether scientists should take a role in recommending priorities for long-term space research initiatives and, if so, to analyze the priority-setting problem in this context and develop a method by which such priorities could be established. After answering the first question in the affirmative in a previous report, the task group set out to accomplish the second task. The basic assumption in developing a priority-setting process is that a reasoned and structured approach for ordering competing initiatives will yield better results than other ways of proceeding. The task group proceeded from the principle that the central criterion for evaluating a research initiative must be its scientific merit -- the value of the initiative to the proposing discipline and to science generally. The group developed a two-stage methodology for priority setting and constructed a procedure and format to support the methodology. The first of two instruments developed was a standard format for structuring proposals for space research initiatives. The second instrument was a formal, semiquantitative appraisal procedure for evaluating competing proposals. This report makes available complete templates for the methodology, including the advocacy statement and evaluation forms, as well as an 11-step schema for a priority-setting process. From the beginning of its work, the task group was mindful that the issue of priority setting increasingly pervades all of federally supported science and that its work would have implications extending beyond space research. Thus, although the present report makes no recommendations for action by NASA or other government agencies, it provides the results of the task group's work for the use of others who may study priority-setting procedures or take up the challenge of implementing them in the future.

Source record↗

NASA NTRS2017

NASA's In-Space Manufacturing Project: Materials and Manufacturing Process Development Update

The mission of NASA's In-Space Manufacturing (ISM) project is to identify, design, and implement on-demand, sustainable manufacturing solutions for fabrication, maintenance and repair during exploration missions. ISM has undertaken a phased strategy of incrementally increasing manufacturing capabilities to achieve this goal. The ISM project began with the development of the first 3D printer for the International Space Station. To date, the printer has completed two phases of flight operations. Results from phase I specimens indicated some differences in material properties between ground-processed and ISS-processed specimens, but results of follow-on analyses of these parts and a ground-based study with an equivalent printer strongly indicate that this variability is likely attributable to differences in manufacturing process settings between the ground and flight prints rather than microgravity effects on the fused deposition modeling (FDM) process. Analysis of phase II specimens from the 3D Printing in Zero G tech demo, which shed further light on the sources of material variability, will be presented. The ISM project has also developed a materials characterization plan for the Additive Manufacturing Facility, the follow-on commercial multimaterial 3D printing facility developed for ISS by Made in Space. This work will yield a suite of characteristic property values that can inform use of AMF by space system designers. Other project activities include development of an integrated 3D printer and recycler, known as the Refabricator, by Tethers Unlimited, which will be operational on ISS in 2018. The project also recently issued a broad area announcement for a multimaterial fabrication laboratory, which may include in-space manufacturing capabilities for metals, electronics, and polymeric materials, to be deployed on ISS in the 2022 timeframe.

Prater, Tracie↗

DOE OSTI2021

Binder Jet Printing of H13 Tool Steel

ORNL and Carpenter worked on evaluating H13 powders with different powder size distributions for deposition via binder jet additive manufacturing (AM). Binder jet AM has the potential to be a costeffective technique for fabrication of near net shaped tools with complex geometries and internal features such as cooling channels that can improve the production efficiency of injection/compression molding tools. However, a critical challenge in binder jet AM is the densification of the said tool for it to be usable. Powder size distribution can affect the process settings required to deposit the material and the subsequent sintering behavior. In this collaborative effort ORNL and Carpenter demonstrated that the process variables depend on the powder size distribution while the carbon pickup during sintering depends on the binder burnout atmosphere and temperature. On the other hand, there was no noticeable difference in the microstructural evolution of H13 deposited using the different powder size distributions.

42 ENGINEERING↗

NASA NTRSDate not supplied

In Pursuit of CFD-based Wind Tunnel Calibrations

Computational fluid dynamic simulations of models tested in wind tunnels require a high level of fidelity and accuracy, particularly for the purposes of CFD validation efforts. Considerable effort is required to ensure a sufficient characterization of both the physical geometry of the wind tunnel, the thermodynamics of the tunnel, and flow conditions in the test section. The condition setting process among subsonic wind tunnels, closed or open throat, is generally the same, though they can differ in specific details of the thermodynamics. The derivation, application, and error estimation of condition setting and calibration is discussed. Computational flow solutions of the high-speed leg of the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel are used to evaluate the calibration process and discuss calibration curve sensitivities. Duplicating the characteristics of a particular wind tunnel is difficult at best. A calibration curve derived from the computational method is the most consistent method to use for tunnel condition setting.

wind tunnel↗

NASA NTRS1987

The Penn State astronomical image processing system

The needs of modern astronomy for image processing set demanding standards in simultaneously requiring fast computation speed, high-quality graphic display, large data storage, and interactive response. An innovative image processing system was designed, integrated, and used; it is based on a supermicro architecture which is tailored specifically for astronomy, which provides a highly cost-effective alternative to the traditional minicomputer installation. The paper describes the design rationale, equipment selection, and software developed to allow other astronomers with similar needs to benefit from the present experience.

Truax, Ryland J.↗

DOE OSTI2022

Nonradiative Recombination via Charge-Transfer-Exciton to Polaron Energy Transfer Limits Photocurrent in Organic Solar Cells

Here, a recombination and exciton loss mechanism is reported in organic solar cells involving energy transfer between charge transfer (CT) excitons and polarons, impacting photocurrent generation, particularly in the near-infrared where polaronic transitions typically reside. This process sets a low-energy cut-off in the external quantum efficiency spectrum of an excitonic donor/acceptor interface, determined by the low-energy polaron absorption peak and the CT state reorganization energy. Furthermore, this process explains the deviation from unity and bias dependence of the CT state's internal quantum efficiency at low photon energies. This process is demonstrated in a variety of systems and it is hypothesized that CT state to polaron energy transfer recombination may be responsible for a share of nonradiative recombination in all organic photovoltaics and can explain numerous experimentally observed device trends regarding photocurrent generation and energy losses. Overall, this work enhances the understanding of photophysical processes in organic materials and allows the design of systems that can avoid this recombination pathway.

14 SOLAR ENERGY↗

NASA NTRS2003

The Effect of Gravity on the Combustion Synthesis of Porous Biomaterials

Production of highly porous composite materials by traditional materials processing is limited by difficult processing techniques. This work investigates the use of self propagating high temperature (combustion) synthesis (SHS) to create porous tricalcium phosphate (Ca3(PO4)2), TiB-Ti, and NiTi in low and microgravity. Combustion synthesis provides the ability to use set processing parameters to engineer the required porous structure suitable for bone repair or replacement. The processing parameters include green density, particle size, gasifying agents, composition, and gravity. The advantage of the TiB-Ti system is the high level of porosity achieved together with a modulus that can be controlled by both composition (TiB-Ti) and porosity. At the same time, NiTi exhibits shape memory properties. SHS of biomaterials allows the engineering of required porosity coupled with resorbtion properties and specific mechanical properties into the composite materials to allow for a better biomaterial.

Castillo, M.↗

DOE OSTI2021

Higgs flavor phenomenology in a supersymmetric left-right model with parity

In this paper, we focus on the supersymmetric model with left-right (LR) symmetry, that is especially proposed in our previous work [ 1 ]. In this model, there are four Higgs doublets in order to realize the Standard Model (SM) fermion masses and the Cabibbo-Kobayashi-Maskawa matrix. The heavy Higgs doublets unavoidably have flavor changing couplings to the SM fermions and induce flavor-changing neutral currents at tree level. We study broader parameter space than the previous work with including the renormalization group corrections to the Yukawa couplings between the LR breaking scale, \( \mathcal{O} \) (10 13 ) GeV, and the supersymmetry breaking scales, \( \mathcal{O} \) (100) TeV. The CP violating observable in K – \( \overline{K} \) mixing, ϵ K , strongly constrains the model, so that heavy Higgs mass should be heavier than \( \mathcal{O} \) (100) TeV. We study the lepton flavor violating (LFV) processes setting heavy Higgs masses to be 170 TeV. The branching ratios of μ → 3 e and the μ – e conversion can be larger than 10 - 16 that could be covered by the future experiments. We also study the degree of fine-tuning in the parameter region that predicts testable LFV processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Process and feedstock driven microstructure for laser powder bed fusion of 316L stainless steel

Here in the pursuit of improving additively manufactured (AM) component quality and reliability, fine-tuning critical process parameters such as laser power and scan speed is a great first step toward limiting defect formation and optimizing the microstructure. However, the synergistic effects between these process parameters, layer thickness, and feedstock attributes (e.g. powder size distribution) on part characteristics such as microstructure, density, hardness, and surface roughness are not as well-studied. In this work, we investigate 316L stainless steel density cubes built via laser powder bed fusion (L-PBF), emphasizing the significant microstructural changes that occur due to altering the volumetric energy density (VED) via laser power, scan speed, and layer thickness changes, coupled with different starting powder size distributions. This study demonstrates that there is not one ideal process set and powder size distribution for each machine. Instead, there are several combinations or feedstock/process parameter ‘recipes’ to achieve similar goals. This study also establishes that for equivalent VEDs, changing powder size can significantly alter part density, GND density, and hardness. Through proper parameter and feedstock control, part attributes such as density, grain size, texture, dislocation density, hardness, and surface roughness can be customized, thereby creating multiple high-performance regions in the AM process space.

316L stainless steel↗

DOE OSTI2019

Printed Conductive Transparent Films for the Fabrication of Sensors by Aerosol Inkjet Systems

Fabrication of sensors using additive manufacturing printers holds the promise for low-cost sensors for continuous and real time monitoring of physical and chemical parameters in industrial settings. Aerosol inkjet systems have demonstrated the capability to print small feature sizes with high precision using a variety of materials. Here, advances in nanomaterials suitable for use by such printers raises the possibility of having transparent, conductive films and sensors. Typically, transparent conductive films are fabricated using metallic oxides and complicated procedures on rigid substrates. In this paper, we present the results of the combination of silver nanowires formulations and aerosol inkjet systems for the fabrication of transparent conductive films by printing and its characterization. Implications for utilization of conductive, transparent sensors in manufacturing and industrial processes settings are discussed.

42 ENGINEERING↗

DOE OSTI2019

Printed Conductive Transparent Films for the Fabrication of Sensors by Aerosol Inkjet Systems

Fabrication of sensors using additive manufacturing printers holds the promise for low-cost sensors for continuous and real time monitoring of physical and chemical parameters in industrial settings. Aerosol inkjet systems have demonstrated the capability to print small feature sizes with high precision using a variety of materials. Advances in nanomaterials suitable for use by such printers raises the possibility of having transparent, conductive films and sensors. Typically, transparent conductive films are fabricated using metallic oxides and complicated procedures on rigid substrates. In this paper, we present the results of the combination of silver nanowires formulations and aerosol inkjet systems for the fabrication of transparent conductive films by printing and its characterization. Further, implications for utilization of conductive, transparent sensors in manufacturing and industrial processes settings are discussed.

42 ENGINEERING↗

NASA NTRS1993

Identification of cometary and asteroidal particles in stratospheric IDP collections

He release temperature curves were determined for a specially processed set of 5 microns to 15 microns stratospheric IDP's whose masses, densities, and compositions were accurately measured. The He release temperature in combination with atmospheric entry calculations yields a most probable entry velocity for each particle and association with either an asteroidal (low velocity) or cometary (high velocity) origin. It was found that over half of the 5-15 microns IDP's have entry velocities consistent with asteroidal origin and that at least 20 percent have cometary origins. A few of the asteroidal particles are porous aggregates and it appears that there may be close material similarities among some primitive asteroids and comets. In the processing of individual 5 microns IDP's and determination of entry velocities, a few dozen microtome slices that can be used for a variety of detailed TEM, IR, and ion probe studies were preserved. These procedures provide laboratory samples that can be generically associated with asteroids and comets and are in a sense a limited sample return mission from these primitive bodies.

Brownlee, D. E.↗