Engineering PapersSearch

SEARCH · Engineering Papers

Results for “Probability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A New Probability Table Methodology with Covariances on Probability Tables

Through this work, we test a new methodology of evaluating probability tables informed by a combination of physics models and experimental data. This methodology uses generalized least squares to produce a joint mean and covariance for average cross sections and probability tables. This methodology has been tested and validated using total Monte Carlo. Attempts were made to parameterize the probability table using a formulation provided in. Although the normal inverse Gaussian fit was successful for the total cross section probability distribution, the rational-function fit to the capture, inelastic, and fission cross sections was unsuccessful due to time constraints.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS

Estimation of the probability of error without ground truth and known a priori probabilities

The probability of error or, alternatively, the probability of correct classification (PCC) is an important criterion in analyzing the performance of a classifier. Labeled samples (those with ground truth) are usually employed to evaluate the performance of a classifier. Occasionally, the numbers of labeled samples are inadequate, or no labeled samples are available to evaluate a classifier's performance; for example, when crop signatures from one area from which ground truth is available are used to classify another area from which no ground truth is available. This paper reports the results of an experiment to estimate the probability of error using unlabeled test samples (i.e., without the aid of ground truth).

Havens, K. A.

Partially coherent scattering in stellar chromospheres. II - The first-order escape probability method. III - A second-order escape probability method

Approximate analytic expressions are derived for resonance-line wing diagnostics, accounting for frequency redistribution effects, for homogeneous slabs, and slabs with a constant Planck function gradient. Resonance-line emission profiles from a simplified conceptual standpoint are described in order to elucidate the basic physical parameters of the line-forming layers prior to the performance of detailed numerical calculations. An approximate analytic expression is derived for the dependence on stellar surface gravity of the location of the Ca II and Mg II resonance-line profile peaks. An approximate radiative transfer equation using generalized second-order escape probabilities, applicable even in the presence of nearly coherent scattering in the damping wings of resonance lines, is derived. Approximate analytic solutions that can be applied in special regimes and achieve good agreement with accurate numerical results are found.

Gayley, K. G.

The probability of flaw detection and the probability of false calls in nondestructive evaluation equipment

The space industry has developed many composite materials that have high durability in proportion to their weights. Many of these materials have a likelihood for flaws that is higher than in traditional metals. There are also coverings (such as paint) that develop flaws that may adversely affect the performance of the system in which they are used. Therefore there is a need to monitor the soundness of composite structures. To meet this monitoring need, many nondestructive evaluation (NDE) systems have been developed. An NDE system is designed to detect material flaws and make flaw measurements without destroying the inspected item. Also, the detection operation is expected to be performed in a rapid manner in a field or production environment. Some of the most recent video-based NDE methodologies are shearography, holography, thermography, and video image correlation.

Temple, Enoch C.

Divide and conquer: separating the two probabilities in seismic phase picking

There are two fundamental probabilities in the seismic phase picking process—the probability of the existence of a seismic phase (detection probability) and the probability associated with the phase arrival time estimation (timing probability). The nearly ubiquitous approach in developing deep learning phase picking models is to use a kernel, such as a truncated Gaussian, to mask the labelled phase arrival time and train a segmentation model. Once a model is trained, the times of the peaks in the output are taken as phase arrival times (picks), and the height of the peaks are taken as ‘probability’ of the picks. Here, we show that this ‘probability’ represents neither the detection nor the timing probability because this approach forces the output to follow the shape of the kernel. We introduce an approach using two models to estimate these two distinct probabilities. We use a binary classifier with a calibrated confidence to address the detection probability and a multiclass classifier to obtain a probability mass function to address the timing probability. This new approach can make the deep learning-based phase picking process more interpretable and provide options to logically control seismic monitoring workflows.

58 GEOSCIENCES

Development of a Nonlinear Probability of Collision Tool for the Earth Observing System

The Earth Observing System (EOS) spacecraft Terra, Aqua, and Aura fly in constellation with several other spacecraft in 705-kilometer mean altitude sun-synchronous orbits. All three spacecraft are operated by the Earth Science Mission Operations (ESMO) Project at Goddard Space Flight Center (GSFC). In 2004, the ESMO project began assessing the probability of collision of the EOS spacecraft with other space objects. In addition to conjunctions with high relative velocities, the collision assessment method for the EOS spacecraft must address conjunctions with low relative velocities during potential collisions between constellation members. Probability of Collision algorithms that are based on assumptions of high relative velocities and linear relative trajectories are not suitable for these situations; therefore an algorithm for handling the nonlinear relative trajectories was developed. This paper describes this algorithm and presents results from its validation for operational use. The probability of collision is typically calculated by integrating a Gaussian probability distribution over the volume swept out by a sphere representing the size of the space objects involved in the conjunction. This sphere is defined as the Hard Body Radius. With the assumption of linear relative trajectories, this volume is a cylinder, which translates into simple limits of integration for the probability calculation. For the case of nonlinear relative trajectories, the volume becomes a complex geometry. However, with an appropriate choice of coordinate systems, the new algorithm breaks down the complex geometry into a series of simple cylinders that have simple limits of integration. This nonlinear algorithm will be discussed in detail in the paper. The nonlinear Probability of Collision algorithm was first verified by showing that, when used in high relative velocity cases, it yields similar answers to existing high relative velocity linear relative trajectory algorithms. The comparison with the existing high velocity/linear theory will also be used to determine at what relative velocity the analysis should use the new nonlinear theory in place of the existing linear theory. The nonlinear algorithm was also compared to a known exact solution for the probability of collision between two objects when the relative motion is strictly circular and the error covariance is spherically symmetric. Figure I shows preliminary results from this comparison by plotting the probabilities calculated from the new algorithm and those from the exact solution versus the Hard Body Radius to Covariance ratio. These results show about 5% error when the Hard Body Radius is equal to one half the spherical covariance magnitude. The algorithm was then combined with a high fidelity orbit state and error covariance propagator into a useful tool for analyzing low relative velocity nonlinear relative trajectories. The high fidelity propagator is capable of using atmospheric drag, central body gravitational, solar radiation, and third body forces to provide accurate prediction of the relative trajectories and covariance evolution. The covariance propagator also includes a process noise model to ensure realistic evolutions of the error covariance. This paper will describe the integration of the nonlinear probability algorithm and the propagators into a useful collision assessment tool. Finally, a hypothetical case study involving a low relative velocity conjunction between members of the Earth Observation System constellation will be presented.

McKinley, David P.

Structural Aspects of Neutron Survival Probabilities

The neutron survival probability (and related quantities including probabilities of extinction and initiation) is a central element of the broader stochastic theory of neutron populations and finds application in fields including reactor start-up, analysis of reactor power bursts and criticality accidents, and safeguards. In a full neutron transport formulation, the equation governing the single-neutron survival probability is a backward or adjoint-like integro-partial differential equation with the added complexity of being highly nonlinear. Analogous formulations of this equation exist in the context of many approximate theories of neutron transport, with the point kinetics formulation having received significant theoretical attention since the 1940s. This work continues this tradition by providing a novel analysis of the single-neutron survival probability equation using the tools of boundary layer theory. The analysis reveals that the “fully dynamic” solution of the single-neutron survival probability equation—and some key probability distributions derived from it—may be cast as a singular perturbation around the underlying quasi-static single-neutron probability of initiation. In this perturbation solution, the expansion parameter is the ratio of the neutron generation time to a macroscopic time scale characterizing the overall system evolution; this interpretation illuminates some of the fundamental structural aspects of neutron survival phenomena.

97 MATHEMATICS AND COMPUTING

On differentiating the probability of error in multipopular feature selection

A method of linear feature selection for n dimensional observation vectors which belong to one of m populations is presented. Each population has a known apriori probability and is described by a known multivariate normal density function. Specifically we consider the problem of finding a k x n matrix B of rank k (k n) for which the transformed probability of misclassification is minimized. Providing that the transformed a posterior probabilities are distinct theoretical results are obtained which, for the case k = l, give rise to a numerically tractable formula for the derivative of the probability of misclassification. It is shown that for the two population problem this condition is also necessary. The dependence of the minimum probability of error on the a priori probabilities is investigated. The minimum probability of error satisfies a uniform Lipschitz condition with respect to the a priori probabilities.

Peters, B. C.

Decision analysis with approximate probabilities

This paper concerns decisions under uncertainty in which the probabilities of the states of nature are only approximately known. Decision problems involving three states of nature are studied. This is due to the fact that some key issues do not arise in two-state problems, while probability spaces with more than three states of nature are essentially impossible to graph. The primary focus is on two levels of probabilistic information. In one level, the three probabilities are separately rounded to the nearest tenth. This can lead to sets of rounded probabilities which add up to 0.9, 1.0, or 1.1. In the other level, probabilities are rounded to the nearest tenth in such a way that the rounded probabilities are forced to sum to 1.0. For comparison, six additional levels of probabilistic information, previously analyzed, were also included in the present analysis. A simulation experiment compared four criteria for decisionmaking using linearly constrained probabilities (Maximin, Midpoint, Standard Laplace, and Extended Laplace) under the eight different levels of information about probability. The Extended Laplace criterion, which uses a second order maximum entropy principle, performed best overall.

Whalen, Thomas

A Simple, Velocity Dependent, Collision Probability Algorithm for Small Combined Hard Body Radii Close Approach Events

Over the last few years progress has been made in the velocity dependent collision probability problem. Recent progress in this problem has been approached via integration of the probability flux into the surface of the combined hard body object. The algorithm presented uses the surface flux approach and is designed to compute the collision probability rate between two objects given their time dependent states and state error covariance matrices. With regards to the computation of the collision probability (Pc) rate, two major differences exist between the development of this algorithm and the usual Pc algorithm. First, the shape of the at-risk volume is assumed to be a cube rather than a sphere. The size of the cube is chosen so that it circumscribes the usual hard body sphere chosen for the spherical Pc problem. This will result in half the length of a side of the cube being equal to the hard body radius (HBR) of the sphere. Second, it is assumed that the HBR of the cube is much smaller than the smallest combined position uncertainty (σ(sub min) > 5*HBR) at each time point of evaluation. This is necessary as the actual collision probability calculation is based on a first order, small variable expansion in the position components of the Gaussian probability density function. This leads to the collision probability rate being to second order in the combined HBR. The collision probability rate is in a concise, closed form containing exponential and error functions.

Frisbee, Joe

NASA Lewis Launch Collision Probability Model Developed and Analyzed

There are nearly 10,000 tracked objects orbiting the earth. These objects encompass manned objects, active and decommissioned satellites, spent rocket bodies, and debris. They range from a few centimeters across to the size of the MIR space station. Anytime a new satellite is launched, the launch vehicle with its payload attached passes through an area of space in which these objects orbit. Although the population density of these objects is low, there always is a small but finite probability of collision between the launch vehicle and one or more of these space objects. Even though the probability of collision is very low, for some payloads even this small risk is unacceptable. To mitigate the small risk of collision associated with launching at an arbitrary time within the daily launch window, NASA performs a prelaunch mission assurance Collision Avoidance Analysis (or COLA). For the COLA of the Cassini spacecraft, the NASA Lewis Research Center conducted an in-house development and analysis of a model for launch collision probability. The model allows a minimum clearance criteria to be used with the COLA analysis to ensure an acceptably low probability of collision. If, for any given liftoff time, the nominal launch vehicle trajectory would pass a space object with less than the minimum required clearance, launch would not be attempted at that time. The model assumes that the nominal positions of the orbiting objects and of the launch vehicle can be predicted as a function of time, and therefore, that any tracked object that comes within close proximity of the launch vehicle can be identified. For any such pair, these nominal positions can be used to calculate a nominal miss distance. The actual miss distances may differ substantially from the nominal miss distance, due, in part, to the statistical uncertainty of the knowledge of the objects positions. The model further assumes that these position uncertainties can be described with position covariance matrices. With these, and some additional simplifying assumptions, a closed-form solution for the probability of collision is obtained. This solution provides clear insights into how each of the independent parameters affects the probability of collision. It shows that for a given maximum probability of collision and prior knowledge of the objects position uncertainties and sizes, only knowledge of the nominal closest approach distance is required to make the launch/no launch decision. The model was completed and used for the mission assurance COLA analysis for the Cassini spacecraft, which was launched on a Titan IV/Centaur rocket on October 15, 1997. Although the model was specifically developed for the Cassini mission, it is clearly applicable for other launches as well. The effect of COLA closures on the launch window is shown. The bar represents the entire 140-min launch window on October 15, 1997; the blackened areas represent the loss of launch opportunities due to the potential for a collision with an orbiting object.

Bollenbacher, Gary

Time-Dependent Satellite Explosion Probabilities for Long-Term Orbital Debris Environment Modeling

On-orbit accidental explosions are a significant contributor to the growth of the orbital debris population. Certain types of satellites have been seen to exhibit different behaviors and timelines of explosions. Recent assessments of on-orbit explosions for three categories of satellites – Russian Sistema Obespecheniya Zapuska (SOZ, Proton 4th stage attitude and ullage motors) units, spacecraft, and rocket bodies – suggest that on-orbit explosions can be modeled using a continuous, time-dependent probability of explosion. This paper discusses the methodology for developing a time-dependent probability of explosion as a function of the satellite’s orbital lifetime based on historical explosions. The SOZ units are found to be best modeled by a modified Gaussian probability distribution, with the peak probability of explosion occurring around 10.4 years on-orbit. Spacecraft and rocket bodies both exhibit exponentially decaying explosion probabilities, with rocket bodies showing fast-, medium-, and slow-time modes of decay. Total cumulative probabilities of explosion are approximately 57% for SOZ units, 4% for spacecraft, and 2% for rocket bodies. Examples of implementation in a simulation of the orbital debris environment using NASA's long-term evolutionary model are given, showing the overall explosion behavior over two centuries is significantly different from that using a previously implemented constant-probability type-dependent explosion rate model and provides a better representation of the historical explosion record.

Alyssa P Manis

Probability of Hydrogen Ignition: A Landscape Review and Gaps Assessment

The primary hazard of a leak from a hydrogen system is due to the immediate or delayed ignition of the fuel leading to a jet flame or explosion. Therefore, understanding the hydrogen ignition probability is critical for analyzing the risk of hydrogen systems. This report reviews the current understanding of hydrogen ignition mechanisms and methods for modeling their probability. The stoichiometry, ignition strength, and ignition source temperature are all important characteristics that can affect both the probability of ignition and the outcome of the subsequent combustion event. A brief review of diffusion ignition demonstrates that ignition probability models must account for seemingly spontaneous ignition of hydrogen in addition to scenarios where the ignition source is readily identified. State-of-the art models for both immediate and delayed ignition probabilities are presented, including different physical aspects of the scenarios (e.g., flow rate, ignition source characteristics) that are considered in the different modeling approaches. Current models often fail to account for the unique properties of hydrogen compared to other fuels, and most lack rigorous validation with hydrogen as a fuel. A fault tree framework is proposed to systematically evaluate the probability of ignition by integrating various ignition mechanisms and their uncertainties. Furthermore, this type of framework could enable additional insights into the most important mechanisms and would enable uncertainty quantification in risk assessment modeling. Recommendations for future research include the need for experimental validation of ignition models and the development of comprehensive methodologies that incorporate the specifics of hydrogen behavior in real-world scenarios.

hydrogen

Incompatible Stochastic Processes and Complex Probabilities

The definition of conditional probabilities is based upon the existence of a joint probability. However, a reconstruction of the joint probability from given conditional probabilities imposes certain constraints upon the latter, so that if several conditional probabilities are chosen arbitrarily, the corresponding joint probability may not exist.

Probabilities Mathematics

Dynamical Simulation of Probabilities

It has been demonstrated that classical probabilities, and in particular, probabilistic Turing machine, can be simulated by combining chaos and non-Lipschitz dynamics, without utilization of any man-made devices(such as random number generators). Self-orgainizing properties of systems coupling simulated and calculated probabilities and their link to quantum computations are discussed. Special attention was focused upon coupled stochastic processes, defined in terms of conditional probabilities, for which joint probability does not exist. Simulations of quantum probabilities are also discussed.

number generators quantum probabilities

Error probability performance of unbalanced QPSK receivers

A simple technique for calculating the error probability performance and associated noisy reference loss of practical unbalanced QPSK receivers is presented. The approach is based on expanding the error probability conditioned on the loop phase error in a power series in the loop phase error and then, keeping only the first few terms of this series, averaging this conditional error probability over the probability density function of the loop phase error. Doing so results in an expression for the average error probability which is in the form of a leading term representing the ideal (perfect synchronization references) performance plus a term proportional to the mean-squared crosstalk. Thus, the additional error probability due to noisy synchronization references occurs as an additive term proportional to the mean-squared phase jitter directly associated with the receiver's tracking loop. Similar arguments are advanced to give closed-form results for the noisy reference loss itself.

Simon, M. K.