Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polarized target”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

NMR Measurements for Solid Polarized Targets at Jefferson Lab

Jefferson Lab's solid polarized targets rely on Nuclear Magnetic Resonance techniques to measure the enhanced polarization provided under Dynamic Nuclear Polarization. Upcoming polarized target experiments in JLab's Hall B present challenging conditions which would benefit from improvements to traditional NMR techniques. For decades, JLab has utilized Liverpool Q Meters for NMR measurements, but these are aging and no longer produced. The polarized target group at Bochum has successfully produced replacement Q Meters with modern components, and we are following their example, exploring new designs for both an analog and a digital Q Meter system. Unlike recent experiments in Halls A and C, the new Hall B target will require external NMR coils, resulting in a weaker signal. In addition, two separate target cells will be utilized, each held at different magnetic fields, allowing them to be polarized in opposing directions, but complicating the NMR measurement. We present the challenges presented by the new Hall B target, lay out plans for improvements to our NMR system, and show results of initial tests of our designs.

Maxwell, James↗

Target polarization for {sup 2}H-vector(e,e{sup '}p)n at GeV energies

We perform a fully relativistic calculation of the {sup 2}H-vector(e,e{sup '}p)n reaction in the impulse approximation employing the Gross equation to describe the deuteron ground state, and we use the SAID parametrization of the full NN scattering amplitude to describe the final state interactions (FSIs). The formalism for treating target polarization with arbitrary polarization axes is discussed, and general properties of some asymmetries are derived from it. We show results for momentum distributions and angular distributions of various asymmetries that can only be accessed with polarized targets.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NMR Polarization Measurements for Jefferson Lab's Solid Polarized Targets

Solid polarized targets rely on Nuclear Magnetic Resonance techniques to provide accurate measurements of the enhanced polarization provided by Dynamic Nuclear Polarization. Upcoming polarized target experiments in Jefferson Lab's Hall B present challenging conditions which demand improvements to traditional NMR methods. We will discuss the changes prompted by the new Hall B target, lay out plans for improvements to our NMR system, and show results of initial tests of our designs.

Maxwell, James↗

DVCS with longitudinally polarized target using CLAS at 6 GeV

Deeply Virtual Compton Scattering (DVCS) is one of the simplest processes that can be described in terms of Generalized Parton Distributions (GPDs). The target single-spin asymmetry (target SSA) in the reaction ep-vector{yields}ep{gamma} is directly proportional to the imaginary part of the DVCS amplitude, and gives access to a combination of GPDs namely H-tilde, H, and E. This asymmetry will be measured in a dedicated experiment at Jefferson Lab using the CEBAF 6-GeV polarized electron beam, a polarized solid-state {sup 14}NH{sub 3} target, and the CEBAF Large Acceptance Spectrometer (CLAS) together with the Inner Calorimeter (IC). The expected asymmetry from leading-order calculations is in the range of 20% to 40%, depending on the kinematics and on the GPD model used. The DVCS amplitude will be mapped out in the Q{sup 2} region from 1 to 4 GeV{sup 2}, x{sub B} from 0.15 to 0.55 and -t from 0.1 to 2 GeV{sup 2} providing new constraints on the GPDs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamically polarized target for the g{sup p}{sub 2} and G{sup p}{sub E }experiments at Jefferson Lab

Recently, two experiments were concluded in Hall A at Jefferson Lab which utilized a newly assembled, solid, polarized hydrogen target. The primary components of the target are a new, high cooling power {sup 4}He evaporation refrigerator, and a re-purposed, superconducting split-coil magnet. It has been used to polarize protons in irradiated NH{sub 3} at a temperature of 1 K and at fields of 2.5 and 5.0 tesla. Maximum polarizations of 55% and 95% were obtained at those fields, respectively. To satisfy the requirements of both experiments, the magnet had to be routinely rotated between angles of 0°, 6°, and 90° with respect to the incident electron beam.

43 PARTICLE ACCELERATORS↗

Measurement of Single- and Double-Spin Asymmetries in Deep Inelastic Pion Electroproduction with a Longitudinally Polarized Target

We report the first measurement of the transverse momentum dependence of double-spin asymmetries in semi-inclusive production of pions in deep-inelastic scattering off the longitudinally polarized proton. Data have been obtained using a polarized electron beam of 5.7 GeV with the CLAS detector at the Jefferson Lab (JLab). Modulations of single spin asymmetries over the azimuthal angle between lepton scattering and hadron production planes {phi} have been measured over a wide kinematic range in Bjorken x and virtual photon squared four-momentum Q{sup 2}. A significant nonzero sin2{phi} single spin asymmetry was observed for the first time indicating strong spin-orbit correlations for transversely polarized quarks in the longitudinally polarized proton.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Future Polarized Target Program at Jefferson Lab

Polarized targets have played a crucial role in Jefferson Lab's exploration of nuclear structure over the past four decades. The three original experimental halls have seen 19 separate installations of polarized solid or gas targets for use in the particle physics scattering experiments, and this trend will continue in the next decade. Five polarized target systems are in preparation for use at JLab in the coming years. Hall B will see the use of two solid polarized targets, one longitudinally polarized to the beam, the other transversely, as well as a novel 3He gas polarized target. In Hall C, new experiments will augment the tensor polarization in dynamically polarized solids. Plans are under development to bring a polarized solid target to Jefferson Lab's photon beam hall, Hall D, for the first time. To support these efforts, the JLab polarized target group is building a test laboratory to develop dynamic nuclear polarization techniques, as well as an apparatus to irradiate target material using electrons from JLab's injector test facility. In this talk, we will explore the development progress and plans for each of these efforts.

Maxwell, James [Thomas Jefferson National Accelera↗

Polarized target nuclear magnetic resonance measurements with deep neural networks

Continuous-wave Nuclear Magnetic Resonance (CW-NMR) operated in constant-current mode has served as a foundational technique for polarization measurement in solid-state dynamically polarized targets within nuclear and high-energy physics experiments for several decades, and it remains an essential tool. Conventional Q-meter-based phase-sensitive detection is critical for precise real-time determination of target polarization during scattering runs. However, the accuracy and reliability of these measurements are frequently compromised by elevated noise levels, baseline drift, and systematic uncertainties arising from signal isolation and fitting, ultimately degrading the overall experimental figure of merit. In this work, we report the first successful application of neural network architectures to continuous-wave NMR polarization metrology. By leveraging advanced machine learning techniques for signal extraction and denoising, we achieve a substantial reduction of fitting uncertainties under a variety of realistic simulated and experimental conditions. These improvements translate directly into more robust real-time (online) polarization monitoring and higher precision in subsequent offline analysis. By reducing analysis-induced uncertainty, the resulting methodology can improve the effective figure of merit for scattering experiments employing dynamically polarized targets and provides a new toolset for NMR-based polarimetry in high-energy and nuclear physics.

Metrology↗

Polarization buildup in stored p and p-bar beams interacting with a polarized target

The kinetics of the polarization buildup in the interaction of stored protons or antiprotons with a polarized target is considered. It is demonstrated that for events where a projectile remains in the beam the polarization buildup is completely due to the spin-flip transitions. However, the corresponding effect turns out to be negligibly small for a hydrogen gas target as well as for a pure electron target. For the latter, the filtering mechanism also does not provide a noticeable beam polarization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A new cw-NMR Q-meter for dynamically polarized targets for particle physics

Polarized solid targets produced via Dynamic Nuclear Polarization rely on Continuous-Wave Nuclear Magnetism Resonance measurements to accurately determine the degree of polarization of bulk samples polarized to nearly 100%. Since the late 1970's phase sensitive detection methods have been utilized to observe the magnetization of a sample as a small change in inductance under RF excitation near the Larmor frequency of the nuclear species of interest, using a device known as a Q-meter. Liverpool Q-meters, produced in the UK in the 80's and 90's, have been the workhorse devices for these targets for decades, however their age and scarcity has meant new systems are needed. In conclusion, we describe a Q-meter system designed and built at Jefferson Lab in the Liverpool style to have comparable electronic performance with several improvements to update and adapt the devices for modern use.

Dynamic nuclear polarization↗

Analysis of the Ammonia Target Polarization

The EG4 experiment (The proton/deuteron g1 structure function and GDH sum at low Q{sup 2}) ran in JLab Hall B in early 2006. The goal was to extend our knowledge of the deuteron and proton spin structure to the lowest possible momentum transfer (0.015<Q{sup 2}<0.2 GeV{sup 2}) in the resonance region (W<2 GeV). In particular, the experiment will allow for the first time to test precisely the Chiral Perturbation Theory Calculations in a domain where it is expected to be valid. Polarized deuterons in ND{sub 3} ammonia were used as the scattering targets in the EG4 experiment. There are three different ways to determine the ND{sub 3} target polarization: the 'area method' and the 'peak ratio method' that extract the target polarization from the NMR signals, and the scattering asymmetry method. Polarization results obtained from these methods will be compared and the error related to each method will be discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Analysis of the Ammonia Target Polarization

The EG4 experiment (The proton/deuteron g{sub 1} structure function and Gerasimov-Drell-Hearn (GDH) sum at low Q{sup 2}) ran in JLab Hall B in early 2006. The goal was to extend our knowledge of the deuteron and proton spin structure to the lowest possible momentum transfer (0.015<Q{sup 2}<0.2 GeV{sup 2}) in the resonance region (W<2 GeV). In particular, the experiment will allow for the first time to test precisely the Chiral Perturbation Theory Calculations in a domain where it is expected to be valid. Polarized deuterons in ND{sub 3} ammonia were used as the scattering targets in the EG4 experiment. There are three different ways to determine the ND{sub 3} target polarization: the 'area method' and the 'peak ratio method' that extract the target polarization from the nuclear magnetic resonance (NMR) signals, and the scattering asymmetry method. Polarization results obtained from these methods will be compared and the error related to each method will be discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Solid Polarized Target Development Facility at Jefferson Lab

Solid polarized targets are a crucial tool used in scattering experiments to investigate different properties of the nucleon. The equipment used to produce, measure, and maintain conditions for the polarized material is complex in comparison to nonpolarized targets. This, in combination with the frequency of polarized experiments run at Jefferson Lab, limits the opportunity to refine and build upon experience gained from previously constructed targets. To address this, the Jefferson Lab Target Group has begun the construction of a permanent facility dedicated to creating and testing material for Dynamic Nuclear Polarization. The design elements and manufacture of the test cryostat along with the incorporation of other DNP associated equipment will be presented.

Brock, James [Thomas Jefferson National Accelerato↗

Solid Polarized Targets and Applications

Examples are given of dynamically polarized targets in use today and how the subsystems have changed to meet the needs of todays experiments. Particular emphasis is placed on target materials such as ammonia and lithium deuteride. Recent polarization studies of irradiated materials such as butanol, deuterated butanol, polyethylene, and deuterated polyethylene are presented. The operation of two non-DNP target systems as well as applications of traditional DNP targets are briefly discussed.

36 MATERIALS SCIENCE↗

Beam Commissioning Result of Polarized Target at SpinQuest

SpinQuest is a fixed-target experiment at Fermilab to measure the Drell-Yan process using transversely polarized NH$_3$ and ND$_3$ targets and unpolarized 120-GeV proton beam. In the Drell-Yan process, a quark in one scattering hadron and an anti-quark in the other hadron annihilate into a virtual photon and then decay into a muon (lepton) pair. The angular distribution of final-state muon pairs with respect to the target polarization is sensitive to the Sivers function of light antiquarks in the nucleon, which is one of the eight Transverse Momentum Dependent (TMD) parton distribution functions. The intensity of the proton beam is as high as $10^{12}$ protons/second, in order to accumulate the required statistics of Drell-Yan events. The polarized target system at SpinQuest has been carefully designed to accommodate such a high beam intensity. It is equipped with an evaporation refrigerator with a cooling power of around 5 W at 1 K. The target temperature is maintained at 1 K even under heat load caused by the proton beam and the DNP microwave. The target system and the spectrometer were commissioned with the proton beam from May through July 2024. The experimental setup of SpinQuest and the performance of the target system during the beam commissioning is reported.

Nakano, Kenichi [Virginia U.]↗

Adiabatic fast passage spin manipulation measurements in solid polarized targets

Adiabatic fast passage (AFP) is a rapid method for reversing nuclear polarization and manipulating spin populations in polarized solid targets, avoiding the long repolarization times associated with dynamic nuclear polarization (DNP). We report AFP measurements in a 5 T, 1 K polarized-target system for irradiated 15 NH 3 , irradiated 14 ND 3 , and butanol-based materials prepared either with TEMPO doping or by irradiation. We also present a joint manipulated-lineshape analysis for spin-1 targets and demonstrate that vector and tensor polarizations can be extracted from AFP-manipulated deuteron NMR spectra even when the populations are not described by a single Boltzmann spin temperature. In conclusion, we report a reproducible polarization- and direction-dependent AFP response in a large irradiated 15 NH 3 sample. These ammonia results are presented as empirical observations under the specific sample–coil conditions of the experiment, with possible circuit-mediated mechanisms such as radiation damping or superradiant behavior discussed but not assigned as a definitive cause.

Adiabatic fast passage↗