SEARCH · Engineering Papers

Results for “Plot extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Quality control and crop characterization framework for multi-temporal UAV LiDAR data over mechanized agricultural fields

Recent developments in remote sensing are enabling automatic, high resolution, and non-destructive survey of agriculture fields, providing the key basis for advancing plant breeding. Among the used remote sensing modalities, LiDAR has attracted wide attention for its ability to directly provide accurate 3D information. Despite the increasing utilization of LiDAR technology in phenotyping, there is still a lack of effective quality control strategies, in particular, quality control of LiDAR data collected on a multi-temporal basis. This study proposes a targetless framework for multi-temporal LiDAR data quality control and crop characterization in mechanized agricultural fields. Features extracted from the fields – terrain patches and row/alley locations – are utilized for evaluating the vertical and planimetric relative accuracy of the point clouds. Row/alley locations in the field are automatically identified from the point clouds based on the assumption that higher point density and/or higher elevation correspond to plant locations. The performance of the proposed quality control strategies is evaluated using multi-temporal datasets collected in agricultural fields of different sizes, orientation, crops, and growth stages. The result shows that the net vertical and planimetric discrepancies between multi-temporal point clouds are ±3 cm and ±8 cm, respectively. While the former reflects the actual accuracy of the point clouds, the latter is a combined effect of the LiDAR point cloud accuracy, rasterization artifacts, crop type, growth pattern, and wind condition during data acquisition. In terms of row and alley detection, the result shows that the proposed strategy achieves high performance and can deal with different planting orientation, crop types, growth stages, canopy cover, and planting density. In conclusion, this study presents a quality control framework for multi-temporal LiDAR data. Finally, the row and alley detection leads to automated extraction of plots, and hence facilitates the use of remotely sensed data for automated phenotyping.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

XRF-XFS-XAS-Auto v1.0 - Beta release

This software allows to analyze XRF maps, XFS spectra and XAS spectra collected at the Advanced Light Source's Beamline 10.3.2. Features include: 1) XRF maps: - process XRF maps, all elemental maps are saved as bmp automatically and labeled with the incident energy used, the scale bar is also labeled and can be controlled. - XRF elemental correlation plots, save the correlation plots automatically - Extract single or multiple transects in XRF maps on one or several regions of interest, each transect profile is numbered and saved in a corresponding folder, along with the corresponding maps showing transect location. 2) XFS spectra - save in log10 scale the XFS spectra, either a single or multiple files all at once. The files are saved as .bmp. - XFS spectra are labeled according to tabulated fluorescence emission lines. 3) XAS spectra - allows to plot individual scalers in the raw data. - allows calibration of the spectra using an Io internal glitch present in all spectra and performing 1st derivative. - Least-square linear combination fitting of XANES or extended XANES spectra using a database of standards using 1, 2 or 3 components maximum. It also provides the 5 top combinations and provide the user for the possibility of saving the 2nd, 3rd, 4th and 5th best combinations in addition to the best one. The processed spectra (pre-edge background substracted, post-edge normalized), the fits and residuals are automatically saved. A table of the component, with fit% and SSN is provided and saved automatically as well.

Fakra, Sirine↗

DOE OSTI2024

Novel principal component analysis tool based on python for analysis of complex spectra of time-of-flight secondary ion mass spectrometry

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a powerful surface analysis tool, which can simultaneously provide elemental, isotopic, and molecular information with part per million (ppm) sensitivity. However, each spectrum may be composed of hundreds of ion signals, which makes the spectra data complex. Principal component analysis (PCA) is a multivariate analysis technique that has been widely used to figure out the variances among samples in ToF-SIMS spectra data analysis and is showing great success in the explanation of complex ToF-SIMS spectra. So far, several software tools have been developed for PCA of ToF-SIMS spectra; however, none of them are freely available. Such a situation leads to some difficulties in extending applications of PCA to various research fields. More importantly, it has long been challenging for common researchers to understand PCA plots and extract chemical differences among samples. In this work, we developed a new and flexible software tool (named “advanced spectra pca toolbox”) based on python for PCA of complex ToF-SIMS spectra along with an easy-to-read manual. It can generate data analysis reports automatically to explain chemical differences among samples, allowing less experienced researchers to easily understand tricky PCA results. Moreover, it is expandable and compatible with artificial intelligence/machine learning functions. Pure goethite and different lignin adsorbed goethite samples were used as a model system to demonstrate our new software tool, proving that our software tool can be readily used in complex spectra data processing. Our new software tool is open-source, convenient, flexible, and expandable. We expect this open-source tool will benefit the ToF-SIMS community.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

FuelsGen

This toolset generates heterogeneous spatial layouts, aimed at representing forest fuels applicable to wildland fire modeling. Methods are included for calibrating (fitting) this model to data extracted from plot survey information.

Gattiker, James↗

DOE OSTI2025

BatteryPro: A Python Toolkit for Battery Data Analysis and Machine Learning Predictions

Analyzing battery test data for research & development can be time-consuming since battery tests often run on the order of months to years, generating large volumes of data. BatteryPro is a comprehensive Python package and software designed to facilitate advanced analysis and performance predictions for battery test data. Developed for battery researchers, it supports data types from widely used battery testing instruments, including MACCOR and Biologic cycling systems. The software provides a variety of tools for extracting and plotting key battery parameters such as time, voltage, capacity, current, and pressure. In addition to its extensive data analysis capabilities, BatteryPro features a dedicated machine learning module that employs a Bayesian Gaussian Mixture Model (GMM) to predict battery performance and degradation. Users can generate synthetic capacity fade data, calculate fade metrics, and leverage predictive models to forecast long-term battery behavior. The software's graphical user interface (GUI) enhances usability, allowing researchers to upload, merge, and analyze multiple data files with full customizability. The GUI also supports machine learning predictions, enabling users to fit models and make predictions based on selected data and parameters. BatteryPro is built using QtDesigner, scikit-learn, matplotlib, and pandas, ensuring a high level of customization, flexibility, and accuracy in battery data analysis. This tool aims to empower researchers with the ability to perform detailed battery analysis and make informed predictions, ultimately advancing the field of battery research.

25 - ENERGY STORAGE↗

DOE OSTI2022

Optical emissivity dataset of multi-material heterogeneous designs generated with automated figure extraction

Optical device design is typically an iterative optimization process based on a good initial guess from prior reports. Optical properties databases are useful in this process but difficult to compile because their parsing requires finding relevant papers and manually converting graphical emissivity curves to data tables. Here, we present two contributions: one is a dataset of thermal emissivity records with design-related parameters, and the other is a software tool for automated colored curve data extraction from scientific plots. We manually collected 64 papers with 176 figures reporting thermal emissivity and automatically retrieved 153 colored curve data records. The automated figure analysis software pipeline uses Faster R-CNN for axes and legend object detection, EasyOCR for axes numbering recognition, and k-means clustering for colored curve retrieval. Additionally, we manually extracted geometry, materials, and method information from the text to add necessary metadata to each emissivity curve. Finally, we analyzed the dataset to determine the dominant classes of emissivity curves and determine the underlying design parameters leading to a type of emissivity profile.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Impedance-Based State-of-Health Estimation for Lithium-Ion Battery Management Systems

This paper discusses an impedance-based state-of-health (SOH) estimation for lithium-ion battery management systems. Features obtained from the Nyquist plot of the electrochemical impedance spectroscopy (EIS) are utilized to estimate the SOH. Two commercial lithium-ion batteries were aged (cycled) in the laboratory to collect aging and impedance data. An algorithm for SOH estimation is presented and evaluated. The performance evaluation results show that the SOH features extracted from the Nyquist plot can be utilized for SOH estimation. Estimated SOH values can be then utilized in various battery management systems (BMS) functions such as for calibrating the available capacity, adjusting charging/discharging strategies, and protection.

Al-Smadi, Mohammad↗

DOE OSTI2026

Modeling Multi-View Impedance-Based Cross-Geometry SOH Estimator for Li-ion Batteries

Abstract: Accurately estimating battery’s State of Health (SOH) remains challenging when models must generalize across cell designs and operating conditions. Most Electrochemical Impedance Spectroscopy (EIS)-based approaches either (i) hand-engineer a few Nyquist-plot features for shallow models—fast but does not generalize across geometries—or (ii) learn directly from Nyquist plots with deep networks, which removes manual feature extraction, yet still limited to a single plot type. As a result, cross-geometry robustness and deployability on constrained Internet of Things (IoT) devices remain open problems. We propose a compact Convolutional Neural Network (CNN) (∼ 10k parameters) that takes multi-representation EIS inputs—Nyquist (real/imaginary) and phase–magnitude (|Z|/ϕ) stacked as four channels, so the model can learn complementary degradation signatures while remaining small enough for fast inference. We build a dataset from cyclic aging of two geometries (LG INR18650MJ1 cylindrical cells and LIR2032 coin cells), acquire EIS every ten cycles from 10 kHz to 10 mHz (10 points/decade), and evaluate with leave-one-cell-out testing strategy. We further study fusion vs. single-representation inputs and assess feasibility for on-device deployment (e.g., NVIDIA Jetson device). The results show that training on multiple EIS representations improves SOH estimation accuracy and cross-geometry generalization compared to single-representation models, which uses only Nyquist or phase–magnitude plots. This design targets accurate, generalizable SOH prediction without manual feature engineering while enabling practical real-time use.

Bakr, Ahmed [The University of Alabama (UA)]↗

DOE OSTI2021

Implementation of Plot File Testing in the DYNA3D/ParaDyn Software Quality Assurance Suite

Automated testing of DYNA3D/ParaDyn plot files was added to the DYNA3D/ParaDyn software quality assurance (SQA) test suite. The new capability extracts select data from the plot files generated during each verification run and compares it to the same baseline answers used to verify the problem. Deviations between baseline answers and plot file values are reported in the same manner as solution discrepancies, and differences in precision levels between the baseline answers and plot file results are accounted for. The new testing leverages the existing SQA test suite framework and test problems and the Python Mili reader and minimally increases the overall run time (< 5%) of the SQA test suite. This new capability provides incremental end-toend testing of the most common DYNA3D/ParaDyn simulation workflows.

42 ENGINEERING↗

DOE OSTI2023

Row selection in remote sensing from four-row plots of maize and sorghum based on repeatability and predictive modeling

Remote sensing enables the rapid assessment of many traits that provide valuable information to plant breeders throughout the growing season to improve genetic gain. These traits are often extracted from remote sensing data on a row segment (rows within a plot) basis enabling the quantitative assessment of any row-wise subset of plants in a plot, rather than a few individual representative plants, as is commonly done in field-based phenotyping. Nevertheless, which rows to include in analysis is still a matter of debate. The objective of this experiment was to evaluate row selection and plot trimming in field trials conducted using four-row plots with remote sensing traits extracted from RGB (red-green-blue), LiDAR (light detection and ranging), and VNIR (visible near infrared) hyperspectral data. Uncrewed aerial vehicle flights were conducted throughout the growing seasons of 2018 to 2021 with data collected on three years of a sorghum experiment and two years of a maize experiment. Traits were extracted from each plot based on all four row segments (RS) (RS1234), inner rows (RS23), outer rows (RS14), and individual rows (RS1, RS2, RS3, and RS4). Plot end trimming of 40 cm was an additional factor tested. Repeatability and predictive modeling of end-season yield were used to evaluate performance of these methodologies. Plot trimming was never shown to result in significantly different outcomes from non-trimmed plots. Significant differences were often observed based on differences in row selection. Plots with more row segments were often favorable for increasing repeatability, and excluding outer rows improved predictive modeling. These results support long-standing principles of experimental design in agronomy and should be considered in breeding programs that incorporate remote sensing.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Dry Season Transpiration and Soil Water Dynamics in the Central Amazon

With current observations and future projections of more intense and frequent droughts in the tropics, understanding the impact that extensive dry periods may have on tree and ecosystem-level transpiration and concurrent carbon uptake has become increasingly important. Here, we investigate paired soil and tree water extraction dynamics in an old-growth upland forest in central Amazonia during the 2018 dry season. Tree water use was assessed via radial patterns of sap flow in eight dominant canopy trees, each a different species with a range in diameter, height, and wood density. Paired multi-sensor soil moisture probes used to quantify volumetric water content dynamics and soil water extraction within the upper 100 cm were installed adjacent to six of those trees. To link depth-specific water extraction patterns to root distribution, fine root biomass was assessed through the soil profile to 235 cm. To scale tree water use to the plot level (stand transpiration), basal area was measured for all trees within a 5 m radius around each soil moisture probe. The sensitivity of tree transpiration to reduced precipitation varied by tree, with some increasing and some decreasing in water use during the dry period. Tree-level water use scaled with sapwood area, from 11 to 190 L per day. Stand level water use, based on multiple plots encompassing sap flow and adjacent trees, varied from ∼1.7 to 3.3 mm per day, increasing linearly with plot basal area. Soil water extraction was dependent on root biomass, which was dense at the surface (i.e., 45% in the upper 5 cm) and declined dramatically with depth. As the dry season progressed and the upper soil dried, soil water extraction shifted to deeper levels and model projections suggest that much of the water used during the month-long dry-down could be extracted from the upper 2–3 m. Results indicate variation in rates of soil water extraction across the research area and, temporally, through the soil profile. These results provide key information on whole-tree contributions to transpiration by canopy trees as water availability changes. In addition, information on simultaneous stand level dynamics of soil water extraction that can inform mechanistic models that project tropical forest response to drought.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Reply to: Low-frequency quantum oscillations in LaRhIn 5 : Dirac point or nodal line?

We thank G.P. Mikitik and Yu.V. Sharlai for contributing this note and the cordial exchange about it. First and foremost, we note that the aim of our paper is to report a methodology to diagnose topological (semi)metals using magnetic quantum oscillations. Thus far, such diagnosis has been based on the phase offset of quantum oscillations, which is extracted from a “Landau fan plot”. A thorough analysis of the Onsager–Lifshitz–Roth quantization rules has shown that the famous π-phase shift can equally well arise from orbital or spin magnetic moments in topologically trivial systems with strong spin-orbit coupling or small effective masses. Therefore, the “Landau fan plot” does not by itself constitute a proof of a topologically nontrivial Fermi surface. In the paper at hand, we report an improved analysis method that exploits the strong energy dependence of the effective mass in linearly dispersing bands. This leads to a characteristic temperature dependence of the oscillation frequency which is a strong indicator of nontrivial topology, even for multi-band metals with complex Fermi surfaces. Three materials, Cd 3 As 2 , Bi 2 O 2 Se and LaRhIn5 served as test cases for this method. Linear band dispersions were detected for Cd 3 As 2 , as well as the F ≈ 7 T pocket in LaRhIn 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

SPRUCE Phospholipid Fatty Acid (PLFA) Abundances, August 2021-June 2022

This data set provides the results for phospholipid fatty acid analysis (PLFA) of peat samples collected from ambient plots in the SPRUCE experiment site, with experimental plot samples still being processed. The samples used to generate this data set were collected on 2021-08-23 and 2022-06-21. This data set includes abundances for groups of lipids indicating total biomass, fungi, Gram-positive bacteria, Gram-negative bacteria, actinomycetes, and anaerobic bacteria. This data set contains one file in comma separate (*.csv) format. Samples: On each sampling date, cores extending to 200 cm were collected and subsampled at 10 cm intervals from 0 and 100 cm and 25 cm intervals below 100 cm depth in Plot 7 and 21. During the lipid extraction procedure, samples were pooled into the following depth increments in order to obtain sufficient material to achieve adequate lipid yield: 0-10, 10-20, 20-30, 30-50, 50-100, and 100-150, and 150-200 cm.

actinomycetes↗

DOE OSTI2022

Soil organic matter, tree communities, and fungal communities across mycorrhizal gradients in the Eastern United States

We collected these data to investigate how mycorrhizal associations are related to soil C and N across four sites in the eastern U.S. broadleaf forest biome, which capture broad variability in climate and tree species. Our sites represented each of the four ecoregions in the eastern United States temperate forest—warm continental (New Hampshire), hot continental (Wisconsin), Prairie (Illinios), and subtropical (Georgia). This breadth naturally provided tree species diversity and allowed us to also investigate how soil C and N are related to canopy tree and EcM fungal community composition. Specifically, we analyzed the effects of mycorrhizal association, canopy tree family, and EcM fungal taxa on the proportion of C and N associated with soil minerals (MAOM) and bulk soil C:N. These are plot level data from forests in New Hampshire, Georgia, Wisconsin, and Illinois. The plots are 10 m in radius and vary across gradients of ectomycorrhizal tree basal area. Within each plot, data include the basal area of all trees >2 cm in diameter identified to species, the abundance of different fungal taxa based on ITS sequences, and the %C, %N, C:N of bulk soil and of soil density fractions (free light, occluded light, and particulate) as well as the proportion of soil C and N within each fraction. The soil data (both organic matter and fungal communities) are from the top 10 cm of the mineral soil. This also includes a meta-analysis of leaf litter k and C:N values for the tree species present in the forests.The "Tree_BA_ALL.csv" files include the basal area of all trees >2 cm in diameter at breast height within our 10 cm radii plots. The "Soil_Data_Final.csv" file contains the soil carbon and nitrogen in bulk and density fractions (concentrations as well as proportion for free light fraction (fLF), occluded light fraction (oLF), and heavy or dense fraction (HF), oxalate extractable iron and aluminum concentrations, as well as the geographic coordinates of each plot's location. The "FungiNonRelative.csv" file contains the abundances of fungal taxa identified via ITS sequencing for each plot (with the exception of 4 plots from GA where there was not enough quality DNA to extract).The "R_ReadyK.csv" and "R_Ready_CN.csv" files contain leaf litter decomposition constant (k) and C:N values from the literature for the tree species found at our sites.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Plot2Spectra: an automatic spectra extraction tool

Scientists cannot easily make use of numerical data encoded in plot images, such as of spectroscopy data, in scientific literature. Plot2Spectra was developed to use computer vision tools to automatically digitize plot images.

Jiang, Weixin↗

DOE OSTI2024

HTESP (High-throughput electronic structure package): A package for high-throughput ab initio calculations

High-throughput ab initio calculations are the indispensable parts of data-driven discovery of new materials with desirable properties, as reflected in the establishment of several online material databases. The accumulation of extensive theoretical data through computations enables data-driven discovery by constructing machine learning and artificial intelligence models to predict novel compounds and forecast their properties. Efficient usage and extraction of data from these existing online material databases can accelerate the next stage materials discovery that targets different and more advanced properties, such as electron–phonon coupling for phonon-mediated superconductivity. However, extracting data from these databases, generating tailored input files for different ab initio calculations, performing such calculations, and analyzing new results can be demanding tasks. Here, in this work, we introduce a software package named “HTESP” (High-Throughput Electronic Structure Package) written in Python and Bash languages, which automates the entire workflow including data extraction, input file generation, calculation submission, result collection and plotting. Our HTESP will help speed up future computational materials discovery processes.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Impedance Modeling for Mixed Conductors with Simultaneous Insertion & Electrocatalytic Reactions: A Case Study of Transition-Metal Hydroxides in Aqueous Electrolyte

Electrochemical impedance spectroscopy (EIS) is commonly used to investigate the kinetics of mixed ionic–electronic conductor (MIEC) electrodes. Across various applications, MIECs exhibit ionic (e.g., insertion) and/or electronic (e.g., electrocatalytic) charge transfer reactions at the electrode/electrolyte interface. Bulk storage and transport of charge carriers also couple with these interfacial reactions. Here, we build a generalized, physics-based impedance model for MIECs with an ion-blocking current collector and explore how bulk and interfacial resistance, chemical capacitance, and DC polarization affect the impedance response. Using transition metal hydroxides as a case study, we provide guidance on extracting reaction kinetics or bulk resistance from the Nyquist plots in interface- or bulk-controlled conditions, respectively. Generalizing our EIS analysis enables a robust analysis of MIEC kinetics for a diverse set of systems.

36 MATERIALS SCIENCE↗

DOE OSTI2024

High-throughput electronic structure package

We introduce HTESP (High-Throughput Electronic Structure Package), an automated tool designed for high-throughput ab initio calculations. HTESP simplifies the entire workflow, including data extraction, input files generation, calculation submission, result collection, and plotting. The package is implemented in Python and Bash languages. In this paper, we provide detailed information about the package, its installation process and some illustrative examples to demonstrate its usage. Additionally, the package includes comprehensive online documentation on input parameters and tutorials to assist users.

Nepal, NirajK↗