Evaluation of two direct-current methods of plasma production for use in magnetic mirror experiments
Hydrogen plasma production by hot cathode and Philips ionization gauge methods
IONIZATION GAUGE↗
SEARCH · Engineering Papers
Results for “Plasma production”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Departure from corotation of the Io plasma torus - Local plasma production
The departure of the Jovian magnetosphere from rigid corotation is adequately explained by outward plasma transport at distances where L is greater than approximately 10. The departure of 5% observed in the Io plasma torus, however, is too large to be accounted for simply by plasma transport. Local plasma production is proposed as the main factor determining the corotation lag in the torus. The outward pick-up current provided by ionization of neutral atoms is calculated and related to the current produced in the ionosphere by the corotation lag. This leads to an expression giving the corotation lag of the torus as a function of radial distance. Charge transfer is found to be an important process, allowing the majority of the torus mass to be ejected from the magnetosphere in a neutral state. Thus, the mass loading rate is found to be several times that inferred from examination of the corotation lag associated with outward plasma transport.
Pontius, D. H., Jr.↗
Hot ion plasma production in HIP-1 using water-cooled hollow cathodes
A steady-state ExB plasma was formed by applying a strong radially inward dc electric field near the mirror throats. Most of the results were for hydrogen, but deuterium and helium plasmas were also studied. Three water-cooled hollow cathodes were operated in the hot-ion plasma mode with the following results: (1) thermally emitting cathodes were not required to achieve the hot-ion mode; (2) steady-state operation (several minutes) was attained; (3) input powers greater than 40 kW were achieved; (4) cathode outside diameters were increased from 1.2 cm (uncooled) to 4.4 cm (water-cooled); (5) steady-state hydrogen plasma with ion temperatures from 185 to 770 eV and electron temperatures from 5 to 21 eV were produced. Scaling relations were empirically obtained for discharge current, ion temperature, electron temperature, and relative ion density as a function of hydrogen gas feed rate, magnetic field, and cathode voltage. Neutrons were produced from deuterium plasma, but it was not established whether thay came from the plasma volume or from the electrode surfaces.
Reinmann, J. J.↗
Hot ion plasma production in HIP-1 using water-cooled hollow cathodes
The paper reports on hot-ion plasma experiments conducted in a magnetic mirror facility. A steady-state E x B plasma was formed by applying a strong radially inward dc electric field near the mirror throats. Most of the results were for hydrogen, but deuterium and helium plasmas were also studied. Three water-cooled hollow cathodes were operated in the hot-ion plasma mode with the following results: (1) thermally emitting cathodes were not required to achieve the hot-ion mode; (2) steady-state operation (several minutes) was attained; (3) input powers greater than 40 kW were achieved; (4) cathode outside diameters were increased from 1.2 cm (uncooled) to 4.4 cm (water-cooled); (5) steady-state hydrogen plasmas with ion temperatures from 185 to 770 eV and electron temperatures from 5 to 21 eV were produced. Scaling relations were empirically obtained for discharge current, ion temperature, electron temperature, and relative ion density as a function of hydrogen gas feed rate, magnetic field, and cathode voltage.
Reinmann, J. J.↗
Production of dense plasmas in a hypocycloidal pinch apparatus
A high-power pinch apparatus consisting of disk electrodes was developed, and diagnostic measurements to study its mechanism of dense plasma production have been made. The collapse fronts of the current sheets are well organized, and dense plasma foci are produced on the axis with radial stability in excess of 5 microsec. A plasma density greater than 10 to the 18th power per cu cm is determined with Stark broadening and CO2 laser absorption. Essentially complete absorption of a high-energy CO2 laser beam has been observed. A plasma temperature of approximately 1 keV is measured with differential transmission of soft X-rays through thin foils. The advantages of this apparatus over the coaxial plasma focus are improvements in (1) plasma volume, (2) stability, (3) containment time, (4) access to additional heating by laser or electron beams, and (5) the possibility of scaling up to a multiple array for high-power operation.
Lee, J. H.↗
Dense plasma focus production in a hypocycloidal pinch
A type of high-power pinch apparatus consisting of disk electrodes was developed, and diagnostic measurements to study its mechanism of dense plasma production were made. The collapse fronts of the current sheets are well organized, and dense plasma focuses are produced on the axis with radial stability in excess of 5 microns. A plasma density greater than 10 to the 18th power/cubic cm was determined with Stark broadening and CO2 laser absorption. A plasma temperature of approximately 1 keV was measured with differential transmission of soft X-rays through thin foils. Essentially complete absorption of a high-energy CO2 laser beam was observed. The advantages of this apparatus over the coaxial plasma focus are in (1) the plasma volume, (2) the stability, (3) the containment time, (4) the easy access to additional heating by laser or electron beams, and (5) the possibility of scaling up to a multiple array for high-power operation.
Lee, J. H.↗
Production of a dense thermonuclear plasma by a pulsed high intensity field emission discharge.
Dense thermonuclear plasma production in Th-D by high energy intense electron beam from pulsed high intensity field emission discharge
Winterberg, F.↗
Production of superheated hydrogen plasma using induction heating of cold plasma and dc plasma enhancement
Production of superheated hydrogen plasma by induction heating of cold plasma and direct current plasma enhancement
HYDROGEN PLASMA↗
Pair production of plasma vortices.
Plasma vortex filaments produced in pairs as shown by image converter photographs of interfaces between magnetic field and accelerated plasma
VORTEX GENERATOR↗
Production of plasma with variable, radial electric fields
A device is described suitable for plasma wave experiments requiring relatively large, variable, radial electric fields perpendicular to a static magnetic field. By separately adjusting the potentials of two independent, coaxial discharge plasmas, the authors produced plasmas with a radial electric field E sub r less than approximately 5 V/cm.
Kustom, B.↗
A phenomenological model for orificed hollow cathodes
A quartz hollow tube cathode was used to determine the operating conditions within a mercury orificed hollow cathode. Insert temperature profiles, cathode current distributions, plasma properties profile, and internal pressure-mass flow rate results are summarized and used in a phenomenological model which qualitatively describes electron emission and plasma production processes taking place within the cathode. By defining an idealized ion production region within which most of the plasma processes are concentrated, this model is expressed analytically as a simple set of equations which relate cathode dimensions and specifiable operating conditions, such as mass flow rate and discharge current, to such important parameters as emission surface temperature and internal plasma properties. Key aspects of the model are examined.
Siegfried, D. E.↗
Carbon dioxide as working gas for laboratory plasmas
Measurements with a RF probe, retarding potential analyzer and mass spectrometer in a laboratory plasma tank were performed using the gases CO2, N2, A and He in order to compare their properties as working gases for laboratory plasma production. The overall result of that CO2 leads to higher plasma densities at lower neutral-gas pressures as well as to a larger Maxwellian component of the electron population, while the electron temperature is lower than that when N2, A and He are used.
Kist, R.↗
Photon pair production in astrophysical transrelativistic plasmas
Photon pair-production processes in marginally relativistic (transrelativistic) accretion plasmas are investigated in both Planckian and non-Planckian cases. Pair production in a plasma with an equilibrium (Planck) spectrum is reviewed, and pair-concentration calculations are performed for three general non-Planckian situations most relevant to black-hole accretion scenarios: steady-state transrelativistic plasmas of relatively high density characterized by a pure bremsstrahlung spectrum, a comptonized bremsstrahlung spectrum, and an unsaturated Compton scattering spectrum. The results obtained indicate that for transrelativistic temperatures (600 million to 6 billion K) photon pair production is not generally a dominant process for a plasma with a pure bremsstrahlung spectrum, but becomes dominant for plasmas where comptonization is important. It is also shown that photon pair-creation processes in a transrelativistic bremsstrahlung-radiating plasma that is more than marginally optically thick to Compton scattering significantly alter the plasma's spectrum by forcing it to become black-body before it reaches relativistic temperatures. Pair production and instabilities in unsteady-state plasmas are briefly considered
Stoeger, W. R.↗
Magnetically confined plasma solar collector
The possibility of using a plasma medium for collecting solar energy in space is examined on the basis of a concept involving an orbiting magnetic bottle in which a solar-energy-absorbing plasma is confined. A basic system uses monatomic cesium as working fluid. Cesium evaporates from a source and flows into the useful volume of a magnetic bottle where it is photoionized by solar radiation. Ions and electrons lost through the loss cones are processed by a recovery system, which might be a combination of electromagnetic devices and heat engines. This study concentrates on the plasma production processes and size requirements, estimates of the magnetic field required to confine the plasma, and an estimate of the system parameters for a 10 GW solar collector using cesium.
Walters, C. T.↗
Spontaneous magnetic field generation in hypervelocity impacts
Hypervelocity impacts of meteoroids onto early planetary surfaces may have generated short-lived magnetic fields. The high specific power densities of the impacts, plasma production in the ejecta clouds, and the chemically layered targets of the meteoroids are analyzed in describing the evolution of the magnetic fields. Durations from about one millionth of a minute to one minute, as well as strengths up to 100 tesla, are posited for the impact-generated magnetic fields. The analogy of magnetic-field generation in laser-target experiments is also mentioned. The acquisition of shock remanence and thermoremanence by the ejecta and nearby rock following impact is discussed.
Srnka, L. J.↗
Magnetic field and shock effects and remanent magnetization in a hypervelocity impact experiment
The impact of aluminum projectiles onto high-alumina terrestrial basalt blocks at 13-15 km/s in the presence of a variable magnetic field is studied. Plasma production but not field production was detected, and characteristics of the remanence and the shocked basalt are reported. Mineralogical data suggest that the magnetization acquired in the material near the craters is shock remanence. The experimental results might indicate that shock effects or possibly thermoremanence in ejecta fragments, may be responsible for part of the magnetization of the lunar surface.
Srnka, L. J.↗
Rotationally-induced Birkeland current systems
Rotational effects which are negligible in earth's magnetosphere become dominant in the magnetospheres of the outer planets where they give rise to Birkeland current circuits coupling the ionospheric and magnetospheric motions. The centrifugal force of corotation produces an azimuthal ring current in the magnetosphere while the Coriolis force produces a current parallel to the plasma flow. The acceleration current also becomes significant when deviations from strict corotation are appreciable. In general, none of these currents are divergence-free, and closure is provided by ionospheric conduction currents via connecting Birkeland currents. Thus the ionospheric conductivity regulates magnetospheric motions much as it does in the terrestrial case. The effects of such currents have been clearly observed in the magnetospheres of Jupiter and Saturn. Birkeland current circuits also transmit planetary angular momentum to external sinks such as conducting satellites (e.g., Io), plasma production sites (e.g., the Io torus), and/or the surrounding solar wind (as proposed for Uranus).
Hill, T. W.↗
Neutrino, gamma-ray, electron, and positron production in an ultrarelativistic plasma
Neutrino, gamma-ray, electron and positron production resulting from inelastic proton-proton collisions in a highly relativistic plasma such as may exist in extragalactic radio or gamma-ray burst sources is examined. The source functions of primary (pions, kaons, and neutrons) and secondary (photons, electrons, positrons and neutrinos) products of relativistic nuclear collisions are computed for the cases of power law and Maxwellian relativistic proton distributions. It is shown that in plasma which is optically thin to interactions between the plasma and secondary gamma-rays, electrons and positrons, only a small fraction of the initial energy is emitted in the observable form of neutrinos and gamma rays. In an optically thick plasma on the other hand, most of the energy of the relativistic protons is found to be equally divided between gamma rays and neutrinos, although only the neutrinos may escape freely to be observed.
Marscher, A. P.↗