Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Physics - Solid state physics, Materials science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Gapped commensurate antiferromagnetic response in a strongly underdoped model cuprate superconductor

It is a distinct possibility that spin fluctuations are the pairing interactions in numerous unconventional superconductors. In the high-transition-temperature (high-T c ) cuprates, superconductivity emerges upon doping antiferromagnetic Mott insulators, and spin fluctuations might furthermore drive unusual pseudogap phenomena. Here we use magnetic neutron scattering to study the highly underdoped cuprate HgBa 2 CuO 4+δ (hole concentration p ≈ 0.064). In contrast to prior results for other underdoped cuprates, we find no evidence of incommensurate magnetic order associated with spin-density-wave or stripe correlations. Instead, the antiferromagnetic response in both the superconducting and pseudogap states is gapped below Δ AF ≈ 6 meV, commensurate over a wide energy range, and disperses above about 55 meV. Given the pristine nature of HgBa 2 CuO 4+δ , which exhibits high structural symmetry and minimal point disorder effects, this behavior likely signifies the unmasked response of the underlying CuO 2 planes near the Mott-insulating state. These results serve as a benchmark for a refined theoretical understanding of the cuprates.

Materials science↗
DOE OSTI2026

Competition between charge-density-wave and superconducting orders on eight-leg square Hubbard cylinders

The issue of whether d-wave superconductivity (SC) occurs in the square-lattice Hubbard model with U of order of the bandwidth has been one of the most debated issues to emerge from the study of high temperature SC. Here, we report variational results on eight-leg cylinders with next-nearest-neighbor hopping in the range $-0.5t\le t^{\prime} \le 0.25t$ with U = 8t and 12t and doped hole concentrations δ = 1/12 and 1/8. For $t^{\prime} \le 0$, the ground-state appears to be a charge-density wave (CDW) of one sort or another with SC correlations that are extremely short-ranged. In contrast, in some cases, the local magnetic order has a correlation length greater than half the cylinder width - suggestive that magnetic order might also arise in the 2D limit. For $t^{\prime} \le 0$, our results depend more strongly on boundary conditions (periodic vs antiperiodic), making it still harder to correctly guess whether SC or CDW correlations dominate in the 2D limit. These results were obtained employing matrix-product states with bond dimensions large enough that energy differences as small as 10 −3 t per site can be resolved.

materials science↗
DOE OSTI2025

Intercalated chalcogenides Fe 1/4 TaS 2 and Fe 1/3 TaS 2 under extreme pressure—temperature conditions

Intercalation is an important strategy for enhancing functionality in complex chalcogenides. This is because layered materials can be endowed with intriguing properties by filling the van der Waals gap with various ions and molecules, which, in addition to their unique chemistry, break symmetry in new ways. In order to explore the properties of intercalated metal dichalcogenides under extreme pressure-temperature conditions, we combine diamond anvil cell techniques, Raman scattering spectroscopy, magnetic susceptibility, and first-principles calculations to reveal the pressure–temperature phase diagram of Fe 1/3 TaS 2 . This system hosts a compression-driven structural phase transition to a polar state as well as remnant charge density wave signatures deriving from the host lamella of the 2H-parent compound. We also explore the role of different A-site patterns and determine that, by comparison, Fe 1/4 TaS 2 is soft and flexible due to the lower metal density inside the van der Waals gap. These findings open the door to entirely new states of matter with exciting property combinations, including metallicity, polarity, chirality, and altermagnetism – depending upon the conditions – that can support a wide range of spintronics and phononics applications.

Materials science↗
DOE OSTI2026

Reaching quantum critical point by adding nonmagnetic disorder in single crystals of superconductor (Ca 𝑥 ⁢Sr 1−𝑥 ) 3 ⁢Rh 4 ⁢Sn 13

The Remeika series superconductor, (Ca 𝑥 ⁢Sr 1−𝑥 ) 3 ⁢Rh 4 ⁢Sn 13 , shows a rare nonmagnetic quantum critical point (QCP) associated with the continuous charge-density wave (CDW) and structural transition under the “dome” of superconductivity achieved by tuning composition and applying pressure. Here, we use a nonmagnetic pointlike disorder induced by 2.5 MeV electron irradiation to suppress the CDW and drive the system to and even beyond the QCP. This conclusion is based on a clear evolution of temperature-dependent resistivity, 𝜌⁡(𝑇), from the Fermi liquid to the non-Fermi liquid regime with increasing amount of disorder. Starting on the CDW side, below the suggested QCP concentration of 𝑥 𝑐 =0.9, added disorder resulted in a progressively larger linear term and a reduced quadratic term in 𝜌⁡(𝑇). Nearly perfect 𝑇−linear dependence is observed at the dose at which long-range CDW order is suppressed to 𝑇=0, consistent with the expectations. We refine the QCP location in this system and place it in the interval between 𝑥=0.75 and 0.85. Our results strongly support the concept that the disorder can tune the system to the quantum critical regime and even beyond. It follows from the argument by Imry and Ma that any ordered phase is unstable toward quenched disorder. Introduced in a controlled way, this disorder becomes a nonthermal tuning parameter likely applicable to a variety of different systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Generalized geometric speed limits for quantum observables

Leveraging quantum information geometry, we derive generalized quantum speed limits on the rate of change of the expectation values of observables. These bounds subsume and, for Hilbert space dimension ≥3, tighten existing bounds—in some cases by an arbitrarily large multiplicative constant. Our theoretical results are supported by illustrative examples and an experimental demonstration using a superconducting qutrit. We also derive two upper bounds on the generalized quantum Fisher information in terms of the condition number of the density matrix. One of these bounds applies only to coherent dynamics and depends also on the variance of the Hamiltonian. The other bound depends also on the so-called Wigner-Yanase skew information. These bounds generalize well-known bounds on the symmetric logarithmic derivative quantum Fisher information and are tighter than the existing bounds for sufficiently mixed states (e.g., for sufficiently high temperature thermal states).

open quantum systems & decoherence↗
DOE OSTI2026

Variation in surface properties as error sources in dynamic temperature measurements

Most temperature measurement methods rely upon the assumption of a single uniform source as part of the analysis in inferring an observed temperature T from the surface of a material. This is true for the radiometric and spectroscopic methods we rely upon in shock physics. However, there are obvious cases where this is a poor assumption that can cause large errors in analysis, such as the measurement of emission from a surface composed of more than one material, such as a rusted surface of Fe and Fe 2 O 3 , or a multi-material surface that could be produced through alloying methods (e.g., mokume gane) or 3D printing. Here we perform an initial examination of the effects of varied surface properties upon the analysis using idealized test data to constrain when we may have better confidence in the resulting calculations. We also examine the structures of the fits to test whether, in principle, comparing the fit with ideal gray bodies would reveal such a structure and enable the researcher to identify when a two-temperature fitting model should be used instead of a single- T model or a wavelength-dependent emissivity model.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantitative kinetic rules for plastic strain-induced α - ω phase transformation in Zr under high pressure

Plastic strain-induced phase transformations (PTs) and chemical reactions under high pressure are broadly spread in modern technologies, friction and wear, geophysics, and astrogeology. However, because of very heterogeneous fields of plastic strain $E$ p and stress σ tensors and volume fraction c of phases in a sample compressed in a diamond anvil cell (DAC) and impossibility of measurements of σ and $E$ p , there are no strict kinetic equations for them. Here, we develop a kinetic model, finite element method (FEM) approach, and combined FEM-experimental approaches to determine all fields in strongly plastically predeformed Zr compressed in DAC, and specific kinetic equation for α-ω PT consistent with experimental data for the entire sample. Since all fields in the sample are very heterogeneous, data are obtained for numerous complex 7D paths in the space of 3 components of the plastic strain tensor and 4 components of the stress tensor. Kinetic equation depends on accumulated plastic strain (instead of time) and pressure and is independent of plastic strain and deviatoric stress tensors, i.e., it can be applied for various above processes. Our results initiate kinetic studies of strain-induced PTs and provide efforts toward more comprehensive understanding of material behavior in extreme conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

UNR Grant Proposal Contribution

The work of Carrier et. al. (citation needed for Matt’s effect of surface roughness on phase transitions/ETI paper) demonstrates that 1D and 2D resistive magnetohydrodynamic (MHD) simulations can reliably model exploding aluminum rods driven by megaampere currents. Close agreement between simulation results and photonic Doppler velocimetry data from the Mykonos electrothermal instability (METI-II) campaign builds confidence in predictive modelling capabilities for pulsed-power HED experiments. Furthermore, 2D MHD simulations show how machined features and micro-scale surface roughness can seed the electrothermal instability (ETI). Surface roughness was observed to reduce the time of melt by 19%, with ETI growth driving the enhanced heating of the rod surface.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Feedback-based quantum algorithms for ground state preparation

The ground state properties of quantum many-body systems are a subject of interest across chemistry, materials science, and physics. Thus, algorithms for finding ground states can have broad impacts. Variational quantum algorithms are one class of ground state algorithms that has received significant attention in recent years. These algorithms utilize a hybrid quantum-classical computing framework to prepare ground states on quantum computers. However, this requires solving a classical optimization problem that can become prohibitively expensive in high dimensions. Here, we develop formulations of feedback-based quantum algorithms for ground state preparation that can be used to address this challenge for two broad classes of Hamiltonians: Fermi-Hubbard Hamiltonians, and molecular Hamiltonians represented in second quantization. Feedback-based quantum algorithms are optimization-free; in place of classical optimization, quantum circuit parameters are set according to a deterministic feedback law derived from quantum Lyapunov control principles. This feedback law guarantees a monotonic improvement in solution quality with respect to the depth of the quantum circuit. A variety of numerical illustrations are provided that analyze the convergence and robustness of feedback-based quantum algorithms for these problem classes. Published by the American Physical Society 2024

Larsen, James B. (ORCID:000000020777440X)↗
DOE OSTI2025

Coexisting Phases in NaNbO 3 Thin Films Influenced by Epitaxial Strain and Size Effects

Coherently strained NaNbO 3 thin films are synthesized across a range of thicknesses, enabling the study of size effects under epitaxial strain in antiferroelectric thin films without relaxation. Competing antiferroelectric‐ferroelectric phases are observed, leading to the stabilization of phase coexistence, multistate switching with strong retention and fatigue performance, and potential avenues to boost energy storage properties.

antiferroelectrics↗
DOE OSTI2025

Estimating Eigenenergies from Quantum Dynamics: A Unified Noise-Resilient Measurement-Driven Approach

Ground state energy estimation in physical, chemical, and materials sciences is one of the most promising applications of quantum computing. In this work, we introduce a new hybrid approach that finds the eigenenergies by collecting real-time measurements and post-processing them using the machinery of dynamic mode decomposition (DMD). From the perspective of quantum dynamics, we establish that our approach can be formally understood as a stable variational method on the function space of observables available from a quantum many-body system. We also provide strong theoretical and numerical evidence that our method converges rapidly even in the presence of a large degree of perturbative noise, and show that the method bears an isomorphism to robust matrix factorization methods developed independently across various scientific communities. Our numerical benchmarks on spin and molecular systems demonstrate an accelerated convergence and a favorable resource reduction over state-of-the-art algorithms. The DMD-centric strategy can systematically mitigate noise and stands out as a leading hybrid quantum-classical eigensolver.

Shen, Yizhi↗
DOE OSTI2025

Fault-tolerant operation and materials science with neutral atom logical qubits

We report on the fault-tolerant operation of logical qubits on a neutral atom quantum computer, with logical performance surpassing physical performance for multiple circuits including Bell state preparation (12x error reduction), random circuits (15x), and a prototype Anderson Impurity Model ground state solver for materials science applications (up to 6x, non-fault-tolerantly). The logical qubits are implemented via the [[4, 2, 2]] code (C 4 ). Our work constitutes the first complete realization of the benchmarking protocol proposed by Gottesman 2016 demonstrating results consistent with fault tolerance. In light of recent advances on applying concatenated C 4 /C 6 detection codes to achieve error correction with high code rates and thresholds, our work can be regarded as a building block towards a practical scheme for fault tolerant quantum computation. Our demonstration of a materials science application with logical qubits particularly demonstrates the immediate value of these techniques on current experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Direct‐Write Printed Contacts to Layered and 2D Materials

Advancements in fabrication methods have shaped new computing device technologies. Among these methods, depositing electrical contacts to the channel material is fundamental to device characterization. Novel layered and 2D materials are promising for next-generation computing electronic channel materials. Direct-write printing of conductive inks is introduced as a surprisingly effective, significantly faster, and cleaner method to contact different classes of layered materials, including graphene (semi-metal), MoS 2 (semiconductor), Bi-2212 (superconductor), and Fe 5 GeTe 2 (metallic ferromagnet). Based on the electrical response, the quality of the printed contacts is comparable to what is achievable with resist-based lithography techniques. These devices are tested by sweeping gate voltage, temperature, and magnetic field to show that the materials remain pristine post-processing. This work demonstrates that direct-write printing is an agile method for prototyping and characterizing the electrical properties of novel layered materials.

2D materials↗
DOE OSTI2026

Rapid Quantum Ground State Preparation via Dissipative Dynamics

Inspired by natural cooling processes, dissipation has become a promising approach for preparing low-energy states of quantum systems. However, the potential of dissipative protocols remains unclear beyond certain commuting Hamiltonians. This work provides significant analytical and numerical insights into the power of dissipation for preparing the ground state of noncommuting Hamiltonians. For quasi-free dissipative dynamics, including certain 1D spin systems with boundary dissipation, our results reveal a new connection between the mixing time in trace distance and the spectral properties of a non-Hermitian Hamiltonian, leading to an explicit and sharp bound on the mixing time that scales polynomially with system size. For more general spin systems, we develop a tensor network-based algorithm for constructing the Lindblad jump operator and for simulating the dynamics. Using this algorithm, we demonstrate numerically that dissipative ground state preparation protocols can achieve rapid mixing for certain 1D local Hamiltonians under bulk dissipation, with a mixing time that scales logarithmically with the system size. We then prove the rapid mixing result for certain weakly interacting spin and fermionic systems in arbitrary dimensions, extending recent results for high-temperature quantum Gibbs samplers to the zero-temperature regime. Together, these results show that dissipation can be a powerful tool for ground state preparation, with potential applications across condensed matter physics, quantum materials science, and beyond.

decoherence↗
DOE OSTI2023

Reconfigurable Cascaded Thermal Neuristors for Neuromorphic Computing

While the complementary metal-oxide semiconductor (CMOS) technology is the mainstream for the hardware implementation of neural networks, an alternative route is explored based on a new class of spiking oscillators called “thermal neuristors”, which operate and interact solely via thermal processes. Utilizing the insulator-to-metal transition (IMT) in vanadium dioxide, a wide variety of reconfigurable electrical dynamics mirroring biological neurons is demonstrated. Notably, inhibitory functionality is achieved just in a single oxide device, and cascaded information flow is realized exclusively through thermal interactions. To elucidate the underlying mechanisms of the neuristors, a detailed theoretical model is developed, which accurately reflects the experimental results. In conclusion, this study establishes the foundation for scalable and energy-efficient thermal neural networks, fostering progress in brain-inspired computing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Molecular-resolution imaging of ice crystallized from liquid water by cryogenic liquid-cell TEM

Despite the ubiquity of ice, a molecular-resolution image of nanoscopic defects or microstructures in ice crystallized from liquid water has never been obtained. This is mainly due to the difficulties in preparing and preserving crystalline ice samples that can survive under high-resolution imaging conditions. Here, we report the stabilization and Å-resolution electron imaging of ice Ih crystallized from liquid water by developing cryogenic liquid-cell transmission electron microscopy (CRYOLIC-TEM). We combine lattice mapping with molecular dynamics simulations to reveal that ice formation is highly tolerant to nanoscale defects such as misoriented subdomains and trapped gas bubbles, which are stabilized by molecular-scale structural motifs. Importantly, bubble surfaces adopt low-energy nanofacets and create negligible strain fields in the surrounding crystal. These bubbles can dynamically nucleate, grow, migrate, dissolve, and coalesce under electron irradiation and be monitored in situ near a steady state. This work improves our understanding of water crystallization behaviors at a molecular spatial resolution.

Materials science↗
DOE OSTI2025

Accelerating Embedding Potential Optimization by Reconstructing the Pseudo-Valence Electron Density

Density functional embedding theory (DFET) enables use of electronic structure methods with higher accuracy than density functional theory in a local region, with applications thus far ranging from (photo/electro)catalysis to reactions in solution. DFET partitions a large collection of atoms into smaller groups that interact via a shared embedding (interaction) potential V emb , determined via functional optimization. The optimized effective potential (OEP) process used to optimize V emb is time-consuming and becomes a computational bottleneck due to sharp, oscillating features of V emb near nuclei. Here, similar to pseudopotential theory, by reconstructing electron densities used in the OEP process from smoother pseudo-valence-only (PVO) electron densities as proxies for total densities of the full system and subsystems, we can retain accuracy in the embedded electronic structure calculations while potentially reducing the overhead of V emb construction, within the projector augmented-wave (PAW) formalism. We explore three different chemical reactions as exemplars to test PVO–DFET, namely, H 2 dissociative adsorption on a Cu(111) surface, H 2 O adsorption on a Pt(111) surface, and aqueous [Ca 2+ –SO 4 2– ] ion-pair formation. The PVO approximation works well for all three systems with minimal loss of accuracy (∼10–70 meV error relative to the original exact-derivative (ED) approach) while accelerating V emb generation for the Cu and Pt systems respectively by 20× and 5×. Given proper numerical convergence parameters, the spatial distributions of differences between PVO- and ED-based V emb outside the core regions are small, explaining the exceptional agreement between the two approaches. Finally, we anticipate that this more efficient PVO–DFET approximation will be useful whenever computation of V emb is much more expensive than subsequent embedded high-level electron correlation calculations.

approximation↗