AIHce 2023 PDC: Sandia Z-Machine & SWiFT: Supplemental Slides for Influencer PDC
Explore the source record for details and available documents.
Backlund, Cynthia Jean↗
SEARCH · Engineering Papers
Results for “PdC”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Scalable PDC Placement Technique for Fast and Resilient Monitoring of Large Power Grids
The wide-area measurement system (WAMS) is a key enabler of real-time monitoring of power grids. The essential goals of WAMS design are fast and resilient data transfer from phasor measurement units (PMU) to phasor data concentrators (PDC). We propose a scalable two-stage PDC placement technique for minimizing the end-to-end delay while maintaining resiliency. In the prescreening stage, the plausible candidates of PDC configurations are identified based on a graph theory-based multi-median function (MMF). Here, in this article, a computationally efficient meta-heuristic algorithm is used to address scalability. In the candidate selection stage, two different algorithms, namely, Suurballe's and Dijkstra's, are employed to identify the best of those plausible PDC configurations as the final design. This technique not only minimizes the hop paths between PMUs and PDCs, but also ensures network resiliency against single PMU, PDC, or communication link failure by incorporating the roles of PMUs in power grid observability into routing policy. Simulation results on the IEEE 57-bus test power system and the 2000-bus test power system demonstrate the effectiveness and scalability of the proposed technique.
24 POWER TRANSMISSION AND DISTRIBUTION↗
ROP model for PDC bits in Geothermal drilling
Geothermal energy is a renewable source of energy, where heat extraction is preferentially balanced with the reservoir's natural heat recharge rate. The objective of this paper is to present and validate a novel rate of penetration (ROP) model for drilling hard and abrasive formations including granite formations for polycrystalline diamond compact (PDC) bits. The ROP model was developed based on a derived relationship of a threshold weight on cutter (WOC) and its corresponding depth of cut (DOC) for a single cutter. Laboratory data was used to scale the derived single cutter relationship to a full-hole ROP model for PDC bits. The ROP model includes a non-linear correlation for Phase I (inefficient drilling due to low WOB values) and a linear Phase II (efficient drilling) ROP response to WOB. The ROP model was verified using measured drilling parameter data from Utah FORGE well# 58-32 and data from Chocolate Mountains well # 17-8 in Southern California. When compared to oil and gas well drilling, geothermal drilling in granitic formations can be more difficult and complicated due to rock hardness and high temperatures. PDC bits can increase ROP and optimize drilling for these types of hard formations. This paper provides novel insight into the ROP response of PDC bits to drilling operational parameters.
15 GEOTHERMAL ENERGY↗
PDC Modifications for Analysis of Gas-Cooled Reactors with Direct Helium Brayton Cycle
Capabilities of the Plant Dynamics Code (PDC) have been extended to allow steady-state and transient simulation of graphite-cooled reactors with direct helium Brayton cycle. On the cycle side, the most significant code modification is the addition of helium properties, in the format required by the code’s equations. Since the code was already formulated to handle more complex real gas properties, adding helium as working fluid that behaves like ideal gas was fairly straightforward. A reactor module was added to PDC to simulate a reactor cooled by the working fluid of the Brayton cycle. Two options are supported: channel type, typical for graphite gas-cooled reactors, and pin type, typical for light-water and liquid metal-cooled reactors. The reactor module is an extension of the electrical heater model and simulates heat deposition in the fuel and transfer of this heat from the fuel to the coolant through the matrix and tube materials. The new reactor module becomes the third option in PDC for modeling heat addition to the cycle, besides previously modeled heat addition heat exchanger and electrical heater. In addition to those changes, other minor code modifications and improvements were introduced during the work of expanding PDC to modeling of gas-cooled reactors. These modifications are summarized in the last chapter of this report.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Extension of Argonne’s Plant Dynamics Code (PDC) Capabilities to TerraPower Direct-Cycle Supercritical CO2 (“Pascal”) Nuclear Reactor Concept. Final CRADA report
Argonne National Laboratory (the Contractor) and TerraPower, LLC, (the Participant), entered into a Cooperative Research and Development Agreement (CRADA) to extend the Plant Dynamics Code (PDC) to model the Pascal reactor plant. PDC is the system-level computer code developed at Argonne, primarily for design and transient analysis of supercritical carbon dioxide (sCO2) energy conversion systems for various power plants. Pascal is a supercritical carbon dioxide (sCO2)-cooled direct-cycle nuclear power reactor under development by TerraPower. New features were added to the code to model components and systems specific to the Pascal plant and to make the code readily available as a tool for design, control, and safety analysis for this and other direct-cycle power plants. TerraPower provided design information of the Pascal reactor and the requirements for the development of the new PDC features. Argonne modified the PDC capabilities to introduce the new features.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Experimental Investigation of Drillstring Torsional Vibration Effect on Rate of Penetration with PDC Bits in Hard Rock
Polycrystalline diamond compact (PDC) bits have shown tremendous performance compared to roller cone bits and have gained attraction in deep geothermal drilling applications. While PDC bits can reach a higher rate of penetration compared to other bits, they are more prone to drilling vibrations. The scope of this paper is to quantify the effects of drillstring torsional vibrations on PDC bit performance using a laboratory testing facility. Here, the tests were performed with three drillstring configurations to evaluate the effect of drillstring vibrations. The results showed that rigid testing overestimates the bit rate of penetration by 35% due to torsional vibrations.
15 GEOTHERMAL ENERGY↗
PDC VOL Connector (PDCVOL) v0.1
PDCVOL is an extension software originated from the Proactive Data Containers (PDC) software (LBNL Track Code 2017-098), it is an HDF5 VOL connector that allows HDF5 applications to store and access data with the PDC system without the need to modify their code. The application can take advantage of the PDC optimization features and achieve better I/O performance.
Byna, Suren↗
Laboratory Drilling Test Data of PDC bits with Sierra White Granite Rock
This file contains unprocessed drilling data tests on Sierra White Granite (SWG) using two new PDC bits. The tests were conducted at Sandia National Laboratories (SNL) in the Hard Rock Drilling Facility (HRDF). The collected data includes ROP data at rotational speeds of 80, 120, and 160 RPMs, with incremental weight on bit (WOB) up to 5100 lbs. The diameter of the 4-bladed and 5-bladed PDC bits was 3 3/4" and supplied by National Oilwell Varco (NOV). Five tests modes were conducted for both bits, which are as follow: (1) Rigid configuration, with no vibration compliance (2) Flywheel configuration (3) Torsional compliance configuration (4) Axial Compliance configuration (5) Combined Axial and Torsional compliance configuration Note: the WOB and torque in the drilling data should be calibrated by zeroing the WOB and torque when the drill bit tags the rock sample.
15 GEOTHERMAL ENERGY↗
Materials Data on PdC by Materials Project
PdC is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. Pd2+ is bonded to six equivalent C2- atoms to form a mixture of corner and edge-sharing PdC6 octahedra. The corner-sharing octahedral tilt angles are 0°. All Pd–C bond lengths are 2.22 Å. C2- is bonded to six equivalent Pd2+ atoms to form a mixture of corner and edge-sharing CPd6 octahedra. The corner-sharing octahedral tilt angles are 0°.
36 MATERIALS SCIENCE↗
Materials Data on PdC by Materials Project
PdC is Zincblende, Sphalerite structured and crystallizes in the cubic F-43m space group. The structure is three-dimensional. Pd2+ is bonded to four equivalent C2- atoms to form corner-sharing PdC4 tetrahedra. All Pd–C bond lengths are 2.05 Å. C2- is bonded to four equivalent Pd2+ atoms to form corner-sharing CPd4 tetrahedra.
36 MATERIALS SCIENCE↗
In-planta production of the biodegradable polyester precursor 2-pyrone-4,6-dicarboxylic acid (PDC): Stacking reduced biomass recalcitrance with value-added co-product
Not Available
2-Pyrone-4,6-dicarboxylic acid (PDC)↗
Evaluating PDC bit-rock interaction models to investigate torsional vibrations in geothermal drilling
Not provided.
Energy & Fuels↗
FDEM modeling of PDC cutter-rock interactions for geothermal drilling applications
Explore the source record for details and available documents.
15 GEOTHERMAL ENERGY↗
Real-Time Drilling Optimization System for Improved Overall Rate of Penetration and Reduced Cost Per Foot in Geothermal Drilling
The key to success in geothermal drilling is economic feasibility, and a major cost in the development of geothermal resources is the actual drilling of the wells. In this project, a real-time drilling optimization system for geothermal drilling was developed. The system couples three individual components while drilling. The first component is a drill stem vibration analysis model, the second is Mechanical Specific Energy (MSE) analyses, and the third is a detailed PDC Rate of Penetration (ROP) drill bit model for optimum RPM and WOB combinations. The benefit of the coupled system is that the range of WOB and RPM could be selected to avoid drill stem vibrations. Secondly, MSE is used as an efficiency measure and the detailed PDC drill bit model ensures the drill bit does not endure temperatures that exceed the temperature at which the PDC cutters experience accelerated wear. The new detailed PDC bit model is based on rock/bit interaction that physically tracks the PDC cutter wear flats as the bit drills ahead giving the capability to calculate the temperature being generated underneath the worn cutters to better advise on operational parameters to avoid accelerated cutter wear and failure and to ensure that operational parameters are applied so that overall ROP is maximized. By combining the drill stem vibrations and the detailed PDC bit cutter wear and “safe” non-accelerated cutter wear temperature and optimum ranges of operating parameters, it results in higher ROP and lower cost drilling. Single cutter PDC testing performed in different lithologies at Sandia was utilized to verify the PDC cutter forces and depth of cut for new and worn cutters. Based on single cutter PDC temperature modeling, verification using single cutter data from the testing done by National Oilwell Varco (NOV) was performed. Sandia’s Hard-Rock Drilling Facility (HRDF) was utilized to test different drill bit configurations with different cutter designs and wear status with different induced modes of vibration to obtain the critical bit RPM/WOB ranges resulting in ineffective drilling and low ROP. The collected test data were further used to verify and calibrate the full hole PDC ROP model that was developed based on single cutter interaction data. A full coupled drill stem vibration model was formulated and verified with geothermal field data from the Chocolate Mountain Aerial Gunnery Range (CMAGR). A graphical user interface (GUI) was developed using Tkinter library in the computer programming language Python, which integrates all the developed models in one system. The developed system consists mainly of the PDC ROP model, PDC bit wear model, PDC cutter temperature model, Mechanical Specific Energy (MSE) model, and drillstring vibration model integrated into one system. The developed system can be used for both, post well analysis and real-time optimization using different criteria such as ROP maximization or MSE minimization. The software uses Differential Evolution Algorithm (DEA) to find optimum values for operational parameters based on last foot drilled while avoiding the drillstring vibration and cutter temperature critical operating parameters.
15 GEOTHERMAL ENERGY↗
Solvent selection for a biomass-to-bioproduct pipeline through integrated reductive catalytic fractionation and microbial funneling
The growing significance of lignin-first biorefineries, which focus on upgrading the aromatics resulting from lignin depolymerization, presents opportunities for bioproduct synthesis using microbial strains capable of funneling a diverse array of phenolics into a single commodity chemical. In this study, we evaluated a biomass-to-bioproduct pipeline involving the reductive catalytic fractionation (RCF) of poplar biomass followed by biological funneling with a Novosphingobium aromaticivorans strain that produces 2-pyrone-4,6-dicarboxylic acid (PDC), a potential bioplastic precursor. Considering the impact of solvent on RCF reactor operating pressure, and the potential inhibitory effects of solvent on downstream microbial funneling, we performed an analysis of six pure solvents, namely methanol, ethanol, isopropanol, isobutanol, 1,4-dioxane and ethylene glycol, and different variations of their aqueous mixtures comprising 5 to 50 vol% water. For each pure solvent and solvent/water system, we measured phenolic monomer yields in the RCF process and PDC yields from the phenolic monomers. We then developed correlation models that relate phenolic monomer yields from RCF-derived samples to Hansen solubility parameters to determine solvent descriptors that contribute to high yields. Furthermore, we developed an integrated biorefinery system to estimate the minimum selling price (MSP) of PDC and the associated carbon footprint to identify solvent systems with better costs and sustainability metrics. These analyses resulted in the 50 vol% methanol/water system being identified as optimal because it reduces RCF reactor pressure and is compatible with microbial funneling with N. aromaticivorans. This solvent system produced 63 g PDC per kg biomass (264 g PDC per kg lignin) from 85 g phenolic monomers per kg biomass at a reduced reactor pressure of 48 bar (reduced by 26% compared to our previous poplar-to-PDC pipeline). The MSP for this system is $\$$13.98 per kg of purified PDC (carbon footprint of 1.47 kg CO 2 e per kg), which is about 24% lower than a previously described poplar-to-PDC pipeline and 46% lower than a lignin-to-PDC pipeline that used pure methanol as the solvent. The results from this study illustrate improvements that can be made in lignocellulosic biorefineries that are compatible with the hybrid chemical and biological processes needed to gain value from lignin.
Sripada, Sarada [Great Lakes Bioenergy Research Ce↗
Analysis of HolosGen Sub-Scale Simulator with Plant Dynamics Code
The Subcritical Power Module Sub-scale Simulator (SPM-SS) has been designed and constructed by HolosGen LLC under the ARPA-E MEITNER program to simulate the thermal-hydraulic and heat transfer behavior of the full-scale Holos-Quad Subcritical Power Modules (SPMs). Four coupled SPMs, each rated at 5.5MW, form the Holos-Quad gas-cooled microreactor design. The SPM-SS represents a substantially scaled-down system with a power rating less than 40 kW, equipped with an electrically heated fuel cartridge heat exchanger, an electrically heated compressor heat exchanger, and a valve actuated turbine heat exchanger, in addition to a recuperator and a cooler heat exchanger. The fuel cartridge represents a portion of the full-scale SPM core, the compressor heat exchanger mimics the temperature changes resulting from the compressor’s turbomachinery inefficiencies, the turbine heat exchanger mimics the expansion process normally occurring through the turbine, while the recuperator and cooler heat exchangers complete the subscale simulator loop. The heaters equipping the fuel cartridge and the compressor heat exchangers are electronically controlled to simulate normal and off-normal SPM operating conditions. The full-scale Holos-Quad SPM design eliminates the traditional balance of plant and executes thermal-to-electric energy conversion by means of an intercooled Brayton cycle with decoupled compressor-turbine turbomachinery. The Holos-Quad full-scale design is equipped with a multi-stage axial Low- and High-Pressure compressor, and a multistage axial turbine. The SPM-SS is designed for testing and validation of selected components which are instead coupled by a traditional balance of plant. The SPMSS is not equipped with turbo-machinery (compressor and turbine) as the development of these components were excluded from the scope of work under the ARPA-E MEITNER funding program. The SPM-SS balance of plant enables modifications, replacement and testing of individual components with different working fluids and is designed to include the turbo-machinery components that will be developed in future research . The SPM-SS can be operated with different gases, variable mass-flow-rates, pressures, and temperatures to obtain test data for selected components, whose performance can be scaled to validate the computer model of the full-scale SPM at various conditions (e.g., start-up, transients conditions). The SPM-SS can operate at the maximum Holos-Quad design pressure of 7 MPa, and a maximum temperature limited to 650 °C by the electrical heaters. Several SPM-SS tests have been conducted and analyzed with the Plant Dynamics Code (PDC) developed at the Argonne National Laboratory (ANL). These tests aimed at validating the PDC modeled predictions of the full-scale Holos-Quad design with data from selected SPM-SS components. In order to address SPM-SS specific characteristics, such as components heat losses and absence of turbomachinery components, some modifications to the PDC have been implemented to factor the design differences from the full-scale Holos-Quad SPM to the SPM-SS. As the PDC offers capabilities to analyze systems with different working fluids, air, nitrogen, and helium were utilized as the SPM-SS working fluids. Air was utilized to fine-tune the SPM-SS Systems Structures and Components (SSCs), nitrogen was utilized to pressure test the SPM-SS loop at the SPMs design maximum pressure of 7MPa. Helium was utilized as the working fluid circulating through the SPM-SS SSCs for specific tests to validate the PDC predictions of the fuel cartridge heat exchanger. SPM-SS tests data were also analyzed with both the steady-state and transient analysis capabilities offered by the PDC. This report describes the PDC analysis of the SPM-SS tests data, including the necessary code modifications and comparison of the code results with the experimental data. Based on the results, a discussion is presented on how the analysis supports design and transient calculations of the full-scale Holos-Quad microreactor. Also based on the results of this work, recommendations are made for future optimizations of the SPM-SS components and PDC model development needs.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Biotransformation of Phenolics in Spent Liquor from Aqueous Ammonia Pretreatment
Spent liquors of biomass pretreatment provide a source for renewable chemical production. These liquors require treatment before being discharged; otherwise, they negatively impact the environment. Herein, spent liquors from aqueous ammonia pretreatment of poplar wood are characterized for phenolic content via liquid chromatography–mass spectrometry and nuclear magnetic resonance spectroscopy. The main phenolics are phenol, p-hydroxybenzamide (pHBAm), and p-hydroxybenzoic acid (pHBA), of which pHBAm and pHBA are produced from the ester-linked p-hydroxybenzoates in poplar wood. Phenol is produced from pHBA via decarboxylation. The potential biotransformation of the extracted phenolics into 2-pyrone-4,6-dicarboxylic acid (PDC) is assessed using an engineered strain of Novosphingobium aromaticivorans DSM12444 (PDC strain). Biotransformation of pHBAm to PDC is shown to be possible in the presence of pHBA, but not when pHBAm is the sole phenolic substrate, this is the first reported observation of N. aromaticivorans producing PDC from an aromatic amide. The phenol present is not transformed to PDC and does not inhibit PDC production. This study demonstrates that the phenolic amide in spent liquor from ammonia pretreatment can be valorized via biotransformation using N. aromaticivorans, which adds to the growing versatility of N. aromaticivorans as a microbial chassis for converting plant-derived compounds to useful products.
biomass↗