Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ParaDiS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Application of diffusion barriers to the refractory fibers of tungsten, columbium, carbon and aluminum oxide

A radio frequency powered ion-plating system was used to plate protective layers of refractory oxides and carbide onto high strength fiber substrates. Subsequent overplating of these combinations with nickel and titanium was made to determine the effectiveness of such barrier layers in preventing diffusion of the overcoat metal into the fibers with consequent loss of fiber strength. Four substrates, five coatings, and two metal matrix materials were employed for a total of forty material combinations. The substrates were tungsten, niobium, NASA-Hough carbon, and Tyco sapphire. The diffusion-barrier coatings were aluminum oxide, yttrium oxide, titanium carbide, tungsten carbide with 14% cobalt addition, and zirconium carbide. The metal matrix materials were IN 600 nickel and Ti 6/4 titanium. Adhesion of the coatings to all substrates was good except for the NASA-Hough carbon, where flaking off of the oxide coatings in particular was observed.

Douglas, F. C.↗

ELF observations during the December 1971 storm.

Initial results from the University of Minnesota search coil magnetometers aboard the Explorer 45 Satellite show several types of ELF signals during the magnetic storms of Dec. 16-19, 1971. The orbit of the satellite at this time was nearly equatorial, with an apogee near 5 earth radii at 2100 local time, and a perigee below 300 km. The emissions vary during different phases of the storms and also with the position of the spacecraft in the magnetosphere. The location of the plasmapause appears to be a particularly important factor in determining the type and intensity of the signals.

Parady, B.↗

Investigation to develop a method to apply diffusion barrier to high strength fibers

A radio frequency powered ion plating process was used to apply the diffusion barriers of aluminum oxide, yttrium oxide, hafnium oxide and titanium carbide to a substrate tungsten fiber. Each of the coatings was examined as to its effect on both room temperature strength and tensile strength of the base tungsten fiber. The coated fibers were then overcoated with a nickel alloy to become single cell diffusion couples. These diffusion couples were exposed to 1093 C for 24 hours, cycled between room temperature and 1093 C, and given a thermal anneal for 100 hours at 1200 C. Tensile testing and metallographic examinations determined that the hafnium oxide coating produced the best high temperature diffusion barrier for tungsten of the four coatings.

Veltri, R. D.↗

Anisotropic proton instability magnetospheric /APIM/ hiss - An introduction

Plasmaspheric hiss is broadband ELF noise between 100 and 2000 Hz generally occurring inside the plasmasphere. It is proposed that some plasmaspheric ELF hiss is generated by ring current protons. The mechanism by which waves are generated is the anisotropic proton instability magnetospheric (APIM) hiss mechanism. APIM hiss (with a frequency close to the lower hybrid resonance frequency) is a loss-cone, flute instability arising from proton velocity space anisotropies. The energy driving the waves comes from the free energy of the 'inverted population' of the proton loss-cone distribution. The APIM hiss mechanism predicts the bandwidth, center frequency, source location, and wave normal angle of some types of plasmaspheric hiss. APIM hiss is suggested as a possible additional loss mechanism for ring current protons.

Parady, B. K.↗

Plasmaspheric hiss observations in the evening and afternoon quadrants

Data obtained with an Explorer-45 instrument for detecting the magnetic components of ELF signals propagating in the magnetosphere are examined, showing that the strongest, most persistent signals were plasmaspheric hiss from a few hundred to a few thousand Hertz. Broad-band signals of 25 milligamma were common. The most intense hiss was observed in the recovery phase of magnetic storms at the inner edge of the ring current. Its source appears to be the outer plasmasphere. Most of the hiss is attributed to generation of hiss through cyclotron resonance with energetic electrons. Ring current protons, forming a peak in the proton flux between 10 and 100 keV, may be a source of some of the hiss.

Parady, B. K.↗

Application of diffusion barriers to high modulus fibers

Barrier layers were coated onto high-modulus fibers, and nickel and titanium layers were overcoated as simulated matrix materials. The objective was to coat the high-strength fibers with unreactive selected materials without degrading the fibers. The fibers were tungsten, niobium, and single-crystal sapphire, while the materials used as barrier coating layers were Al2O3, Y2O3, TiC, ZrC, WC with 14% Co, and HfO2. An ion-plating technique was used to coat the fibers. The fibers were subjected to high-temperature heat treatments to evaluate the effectiveness of the barrier layer in preventing fiber-metal interactions. Results indicate that Al2O3, Y2O3, and HfO2 can be used as barrier layers to minimize the nickel-tungsten interaction. Further investigation, including thermal cycling tests at 1090 C, revealed that HfO2 is probably the best of the three.

Veltri, R. D.↗

A multichannel passive microwave atmospheric temperature sounding system

The development of a small, lightweight, low-power, seven channel passive microwave radiometer system for use on the Defense Meteorological Satellite Program (DMSP) was described. The 50-60 GHz sensor system operates in the region of an intense atmospheric oxygen absorption band to provide atmospheric temperature profiles to 30 kilometer altitudes on a global basis.

Louappe, M. E.↗

Observations of ULF electric field fluctuations in the dayside auroral oval

Electric field oscillations at frequencies centered below 10 Hz were measured by a payload equipped with double-probe electric field detectors which was launched into the dayside auroral oval during the Greenland rocket campaign on January 11, 1975. These oscillations exceeded an amplitude of 3 mV/m broadband and occurred over a period of about 90 s. These oscillations occurred during a proton injection event when the quasi-static electric field was less than 20 mV/m on the average. However, during a brief 2-s interval the electric field exceeded 50 mV/m. Analysis of the amplitude as a function of the spin frequency showed that the electric field was confined to a plane perpendicular to the magnetic field. The power spectrum was of the form f to the -6.5 + or - 1.5 power, where f is the frequency over the range from 8 to 18 Hz. The existence of a large electric field fluctuation in a spatially or temporally confined region of low-amplitude turbulence suggests that this may be an observation of the low-altitude projection of a turbulent region associated with electrostatic shocks which have recently been observed at higher altitudes.

Temerin, M.↗

Centimeter-level relative positioning with GPS

Although the Global Positioning System (GPS) was designed primarily for real-time navigation and positioning applications at the decameter level of accuracy, the GPS has been used to determine all three relative position coordinates of fixed points with centimeter-level accuracy, when the distance between the points has been of the order of 10 km. For intersite distances less than 1 km the uncertainty is about 3 mm, and for distances greater than 10 km the uncertainty in each coordinate is about 1-2 ppm of the distance. These results have been obtained with commercially available production equipment (Macrometer model V-1000 interferometric surveyors) operated by regular surveying personnel under real field conditions, not just by university scientists under ideal laboratory conditions. Techniques that promise to reduce the uncertainty to 0.1 ppm for distances greater than 10 km are being developed.

Counselman, C. C., III↗

Thermodynamic reactivity, growth and characterization of mercurous halide crystals

Thermodynamic calculations were carried out for the Hg-X-O system (X = Cl, Br, I) to identify the potential sources of contamination and relative stability of oxides and oxy-halide phases. The effect of excess mercury vapor pressure on the optical quality of mercurous halide crystal was studied by growing several mercurous chloride crystals from mercury-rich composition. The optical quality of crystals was examined by birefringence interferometry and laser scattering studies. Crystals grown in slightly mercury-rich composition showed improved optical quality relative to stoichiometric crystals.

Singh, N. B.↗

Laser Induced Rotation of a Levitated Sample in Vacuum

A method of systematically controlling the rotational state of a sample levitated in a high vacuum using the photon pressure is described. A zirconium sphere was levitated in the high-temperature electrostatic levitator and it was rotated by irradiating it with a narrow beam of a high power laser on a spot off the center of mass.

laser induced rotation electrostatic levitator↗

Assessment of Utilization of Food Variety on the International Space Station

Long duration missions will require astronauts to subsist on a closed food system for at least three years. Resupply will not be an option, and the food supply will be older at the time of consumption and more static in variety than previous missions. The space food variety requirements that will both supply nutrition and support continued interest in adequate consumption for a mission of this duration is unknown. Limited food variety of past space programs (Gemini, Apollo, International Space Station) as well as in military operations resulted in monotony, food aversion, and weight loss despite relatively short mission durations of a few days up to several months. In this study, food consumption data from 10 crew members on 3-6-month International Space Station missions was assessed to determine what percentage of the existing food variety was used by crew members, if the food choices correlated to the amount of time in orbit, and whether commonalities in food selections existed across crew members. Complete mission diet logs were recorded on ISS flights from 2008 - 2014, a period in which space food menu variety was consistent, but the food system underwent an extensive reformulation to reduce sodium content. Food consumption data was correlated to the Food on Orbit by Week logs, archived Data Usage Charts, and a food list categorization table using TRIFACTA software and queries in a SQL SERVER 2012 database.

Cooper, M. R.↗

Augmenting Topic Finding in the NASA Aviation Safety Reporting System using Topic Modeling

Context: The NASA Aviation and Safety Reporting System (ASRS) provides various publications to the aviation community (including individual anonymous reports, Callback, Database Search Requests, Directline, and Alerting Messages). Key to these publications are the timely processing of new reports, which is currently done mostly manually by ASRS staff, and which the volume increases yearly. Aim: We investigate whether existing topic modelling techniques are suitable to ease some of the manual effort, and to enhance it with additional visual cues regarding the process of grouping, sense making and labeling incoming (and previous) reports. Method: We evaluate the applicability of WarpLDA topic modelling results combined with three visualization tools, the first two of which have been extended by us in this work for ASRS: Termite, TopicFlow, and LDAVis. Based on the identified limitations in these tools, we propose a methodology for improving them, and evaluate their outputs using ASRS as our test dataset. Results: The user interfaces of Termite, Topicflow and LDAVis were found insufficient for sense-making of the narratives. Moreover, concerns regarding the stability of results due to the inherent randomness of topic modelling, and the lack of a measurable approach for evaluation against the existing ASRS manual workflow were also noted. Conclusion: While many tools to topic modeling and visualization have been proposed, more work is necessary before they can be applied in practical situations to improve existing manual workflows. The methodology presented and applied in this work contribute towards this effort.

ASRS↗

Thermophysical Properties of Zirconium at High Temperature

Six thermophysical properties of both the solid and liquid zirconium measured using the high-temperature electrostatic levitator at JPL are presented. These properties are: density, thermal expansion coeffiecient, constant pressure heat capacity, hemispherical total emissivity, surface tension and viscosity.

thermophysical↗

Identifying Emerging Safety Threats Through Topic Modeling in the Aviation Safety Reporting System: A Covid-19 Study

The NASA Aviation Safety Reporting System (ASRS) is a voluntary, confidential aviation safety reporting system. The ASRS receives reports from pilots, air traffic controllers, flight attendants, and others involved in aviation operations. The reports are de-identified and coded by ASRS expert safety analysts, and a short descriptive synopsis is written to describe the safety issue. The de-identified reports are then disseminated to the aviation community in many ways, including via an online database, Safety Alert Bulletins, For Your Information Notices, and the CALLBACK newsletter. In this work, we consider whether we can improve the grouping, linking, and understanding of safety concerns through topic modeling. Specifically, we use topic modeling as a building block to identify emerging safety threats over time. This unsupervised approach, we argue, offers the flexibility to identify new emerging themes in this large dataset by constructing different timelines based on the content similarity of ASRS report narratives. This method's unsupervised nature improves upon related research, which is limited to pre-defined labels and therefore can not fully capture emerging safety threats. We apply our method to all ASRS reports in 2020 to assess if the generated timelines can highlight COVID-19 as it is emerging as a safety threat in incoming ASRS reports. We perform both a quantitative and qualitative evaluation of the automatically constructed timelines. The qualitative evaluation is performed by describing the evolution of top terms in the timelines, generated by our method, which we found explicitly convey the themes of COVID-19. Separately, we use a set of 1,213 COVID-19 reports from 2020 that were manually identified by ASRS analysts to quantitatively evaluate the COVID-19 reports distribution across the timelines. Our results have shown that COVID-19 emergence can be identified using the top terms that were generated by topic modeling. The top terms in topic modeling therefore can serve as a summary alternative to manually inspecting reports. Moreover, leveraging the manually identified COVID-19 reports, we found the manually identified timelines accounted for over 70% of the COVID-19 reports curated by the ASRS analysts, which demonstrates the potential of this approach for facilitating the understanding of safety concerns as they emerge and evolve. This method shows great potential to understand aerospace safety threats and other narrative- driven incident report databases.

ASRS↗