Superconductivity in the van derWaals layered compound PS[subscript 2]
Abstract not provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
We dynamically compress solid deuterium over <100 ps from initial pressures of 22 GPa to 55 GPa, to final pressures as high as 71 GPa, with <40 μJ of pulse energy. At 25 GPa initial pressure, we measure compression wave speeds consistent with quasi-isentropic compression and a 24% increase in density. The laser drive energy per unit density change is 10{sup 9} times smaller than it is for recent longer (∼30 ns) time scale compression experiments. This suggests that, for a given final density, dynamic compression of hydrogen might be achieved using orders of magnitude lower laser energy than currently used.
The dilation x-ray imager (DIXI) is a high-speed x-ray framing camera that uses the pulse-dilation technique to achieve a temporal resolution of less than 10 ps. This is a 10× improvement over conventional framing cameras currently employed on the National Ignition Facility (NIF) (100 ps resolution), and otherwise only achievable with 1D streaked imaging. A side effect of the dramatically reduced gate width is the comparatively lower detected signal level. Therefore we implement a Poisson noise reduction with non-local principal component analysis method to improve the robustness of the DIXI data analysis. Furthermore, we present results on ignition-relevant experiments at the NIF using DIXI. In particular we focus on establishing that/when DIXI gives reliable shape metrics (P 0 , P 2 and P 4 Legendre modes, and their temporal evolution/swings).
We describe the performance of a 512x512 gated CMOS read out integrated circuit (ROIC) with a 250 ps exposure time. A low-skew, H-tree trigger distribution system is used to locally generate individual pixel gates in each 8x8 neighborhood of the ROIC. The temporal width of the gate is voltage controlled and user selectable via a precision potentiometer. The gating implementation was first validated in optical tests of a 64x64 pixel prototype ROIC developed as a proof-of-concept during the early phases of the development program. The layout of the H-Tree addresses each quadrant of the ROIC independently and admits operation of the ROIC in two modes. If “common mode” triggering is used, the camera provides a single 512x512 image. If independent triggers are used, the camera can provide up to four 256x256 images with a frame separation set by the trigger intervals. The ROIC design includes small (sub-pixel) optical photodiode structures to allow test and characterization of the ROIC using optical sources prior to bump bonding. Reported test results were obtained using short pulse, second harmonic Ti:Sapphire laser systems operating at λ~ 400 nm at sub-ps pulse widths.
Rates of the two-, three-, four-, and five-photon annihilations of the electron-positron pairs are determined numerically for the three-body positronium ion Ps{sup -}(e{sup -}e{sup +}e{sup -}) and four-body bipositronium ''molecule''Ps{sub 2}(e{sup -}e{sup +}e{sup -}e{sup +}). The values obtained in our computations are {gamma}{sub 2{gamma}}(Ps{sup -}){approx_equal}2.080 485 305 25x10{sup 9} s{sup -1}, {gamma}{sub 3{gamma}}(Ps{sup -}){approx_equal}5.636 415 155 0x10{sup 6} s{sup -1}, {gamma}{sub 4{gamma}}(Ps{sup -}){approx_equal}3.075x10{sup 3} s{sup -1}, {gamma}{sub 5{gamma}}(Ps{sup -}){approx_equal}5.383 s{sup -1}, and {gamma}{sub 2{gamma}}(Ps{sub 2}){approx_equal}4.438 595 2x10{sup 9} s{sup -1}, {gamma}{sub 3{gamma}}(Ps{sub 2}){approx_equal}1.202 497x10{sup 7} s{sup -1}, {gamma}{sub 4{gamma}}(Ps{sub 2}){approx_equal}6.562x10{sup 3} s{sup -1}, {gamma}{sub 5{gamma}}(Ps{sub 2}){approx_equal}11.484 s{sup -1}. The four- and five-photon annihilation rates are significantly smaller than the corresponding two- and three-photon annihilation rates known for these systems. We also determine the rates of one- and zero-photon annihilation for the Ps{sup -} ion and Ps{sub 2} system. The corresponding numerical values are {gamma}{sub 1{gamma}}(Ps{sup -}){approx_equal}3.824 91x10{sup -2} s{sup -1}, {gamma}{sub 1{gamma}}(Ps{sub 2}){approx_equal}1.941 88x10{sup -1} s{sup -1}, and {gamma}{sub 0{gamma}}(Ps{sub 2}){approx_equal}2.321 97x10{sup -9} s{sup -1}.
The recent discovery of the isostructrual cubic Na 3 PS 4 and Na 3 PSe 4 as fast Na-ion conductors provided a general structural framework for the exploration of new sodium superionic conductors. In this work, we systematically investigated the structures and ionic conduction characteristics of a series of compounds with the general chemical formula of Na 3 PS x Se 4–x . Synthesis of Na 3 PS 4 under different conditions (e.g., temperature, reaction vessel, mass of the precursors) reveals the reactivity of the precursors with the reaction tubes, producing different polymorphs. X-ray diffraction studies on the solid solution phases Na 3 PS x Se 4–x identified a tetragonal-to-cubic phase transition with increasing Se concentration. This observation is consistent with the computed stability of the tetragonal and cubic polymorphs, where the energy difference between the two polymorphs becomes very close to zero in Se-rich compositions. Furthermore, ab initio molecular dynamic simulations suggest that the fast Na-ion conduction in Na 3 PS x Se 4–x may not be causally related with the symmetry or the composition of these phases. The formation of defects, instead, enables fast Na-ion conduction in this class of materials.
A series of Ca-containing lanthanide thiophosphates has been obtained and their structural evolution from 3D for LnPS 4 and Cs 0.3 (Ln 0.7 Ca 0.3 )PS 4 to 2D in Cs 0.5 (Ln 0.5 Ca 0.5 )PS 4 was shown as a function of Ca content. The first series with an idealized formula of Cs 0.3 (Ca 0.3 Ln 0.7 )PS 4 crystallizes in the R3¯m with combining macron]m space group and belongs to a new structure type that consists of a channel containing [(Ca 0.3 Ln 0.7 )PS 4 ] 0.3– framework, where the channels are occupied by severely disordered Cs + cations. A second new series with formula Cs 0.5 (Ca 0.5 Ln 0.5 )PS 4 crystallizes in the monoclinic C2/c space group and exhibits a layered structure consisting of [(Ca 0.5 Ln 0.5 )PS 4 ] 0.5– layers with Cs + cations located between the layers for charge balance. Together with the parent structure type, LnPS 4 , these three structure types illustrate how the LnPS 4 structure changes with Cs + cation incorporation, reducing its dimensionality from 3D to 2D. The magnetic properties of Cs 0.3 [(Ca 0.3 Ce 0.7 )PS 4 ] and Cs 0.3 [(Ca 0.3 Pr 0.7 )PS 4 ] were studied and revealed no magnetic transition down to 2 K.
Sulfide-based Na-ion conductors are promising candidates as solid-state electrolytes (SSEs) for fabrication of solid-state Na-ion batteries (NIBs) because of their high ionic conductivities and low grain boundary resistance. Currently, most of the sulfide-based Na-ion conductors with high conductivities are focused on Na 3 PS 4 phases and its derivatives. It is desirable to develop Na-ion conductors with new composition and crystal structure to achieve superior ionic conductivities. Here we report a new quaternary Na-ion conductor, Na 10.8 Sn 1.9 PS 11.8 , exhibiting a high ionic conductivity of 0.67mS cm -1 at 25 °C. This high ionic conductivity originates from the presence of a large number of intrinsic Na-vacancies and three-dimensional Na-ion conduction pathways, which has been confirmed by single-crystal X-ray diffraction and first-principles calculations. The Na 10.8 Sn 1.9 PS 11.8 phase is further evaluated as an electrolyte in a Na-Sn alloy/TiS 2 battery, demonstrating its potential application in all-solid-state NIBs.
Abstract The PICOSEC Micromegas precise timing detector is based on a Cherenkov radiator coupled to a photocathode operating in a semi-transparent mode and a Micromegas amplification structure. The first proof of concept single-channel prototype was able to achieve a time resolution below 25 ps. One of the crucial aspects in the development of precise timing gaseous detectors applicable in high-energy physics experiments is a modular design that enables large area coverage. The first 19-channel multi-pad prototype with an active area of approximately 10 cm 2 suffered from degraded timing resolution due to the non-uniformity of the preamplification gap thickness. A new 100 cm 2 detector module with 100 channels based on a rigid hybrid ceramic/FR4 Micromegas board for improved drift gap uniformity was developed. Initial measurements with 80 GeV/c muons showed improvements in timing response over the measured pads and a time resolution below 25 ps. More recent measurements with a thinner drift gap detector module and newly developed RF pulse amplifiers show that the pad centre resolution can be enhanced to the level of 17 ps. This work will present the development of the detector from structural simulations, design, and beam test commissioning with a focus on the timing performance of a thinner drift gap detector module in combination with new electronics using an automated timing scan method.
This letter reports the correlation of anisotropy and directional conduction in the fast Li{sup +} conductor β-Li{sub 3}PS{sub 4}, one of the low-symmetry crystalline electrolyte candidates. The material has both high conductivity and good stability that serves well for the large-scale energy storage applications of all-solid-state lithium ion batteries. The anisotropic physical properties, demonstrated here by the thermal expansion coefficients, are crucial for compatibility in the solid-state system and battery performance. Neutron and X-ray powder diffraction measurements were done to determine the crystal structure and thermal stability. The crystallographic b-axis was revealed as a fast expansion direction, while negligible thermal expansion was observed along the a-axis around the battery operating temperatures. The anisotropic behavior has its structural origin from the Li{sup +} conduction channels with incomplete Li occupancy and a flexible connection of LiS{sub 4} and PS{sub 4} tetrahedra within the framework. This indicates a strong correlation in the direction of the ionic transport in the low-symmetry Li{sup +} conductor.
A coherent, mm-sub-mm-wave source driven by a RF electron gun is proposed for wide research applications as well as auxiliary inspection and screening, safe imaging, cancer diagnostics, surface defectoscopy, and enhanced time-domain spectroscopy. It allows generation of high peak and average THz-sub-THz radiation power provided by beam pre-bunching and chirping in the RF gun followed by microbunching in magnetic compressor, and resonant Cherenkov radiation of an essentially flat beam in a robust, ~inch-long, planar, mm-sub-mm gap structure. The proof-of-principle has been successfully demonstrated in Phase I on a 5 MeV beam of L-band thermionic injector of Idaho Accelerator Center. The system can also deliver an intense, ps-sub-ps bursts of low-to-moderate dose of relativistic electrons and X-ray radiation produced by the same beam required for pulsed radiolysis as well as to enhance screening efficiency, throughput and safety.
Crystal structures of new rubidium rare earth thiophosphates with the formulas Rb 3 Ln(PS 4 ) 2 (Ln = La, Ce, Pr), Rb 3−x Na x Ln(PS 4 ) 2 (Ln = Ce, Pr; x = 0.50, 0.55), and RbEuPS 4 crystallized out of a molten RbCl flux.
We employed time- and space-resolved full-field magnetic transmission soft x-ray microscopy to observe vortex-core gyrations in a pair of dipolar-coupled vortex-state Permalloy (Ni{sub 80}Fe{sub 20}) disks. The 70 ps temporal and 20 nm spatial resolution of the microscope enabled us to simultaneously measure vortex gyrations in both disks and to resolve the phases and amplitudes of both vortex-core positions. We observed their correlation for a specific vortex-state configuration. This work provides a robust and direct method of studying vortex gyrations in dipolar-coupled vortex oscillators.
A 10-ps, 263-nm (4{omega}) laser is being built to probe plasmas produced on the OMEGA EP [J. H. Kelly, L. J. Waxer, V. Bagnoud, I. A. Begishev, J. Bromage, B. E. Kruschwitz, T. E. Kessler, S. J. Loucks, D. N. Maywar, R. L. McCrory et al., J. Phys. IV France 133, 75-80 (2006)]. A suite of optical diagnostics (schlieren, interferometry, and grid image refractometry) has been designed to diagnose and characterize a wide variety of plasmas. Light scattered by the probe beam is collected by an f/4 catadioptric telescope and a transport system is designed to image with a near-diffraction-limited resolution ({approx}1 -{mu}m full width at half maximum) over a 5-mm field of view to a diagnostic table. The transport system provides a contrast greater than 1 : 10{sup 4} with respect to all wavelengths outside of the 263 {+-} 2 nm measurement range.
A polarimetry diagnostic was built and characterized for magnetic-field measurements in laser-plasma experiments on the OMEGA EP laser. This diagnostic was built into the existing 4ω (263-nm) probe system that employs a 10-ps laser pulse collected with an f/4 imaging system. The diagnostic measures the rotation of the probe beam's polarization. The polarimeter uses a Wollaston prism to split the probe beam into orthogonal polarization components. Spatially localized intensity variations between images indicate polarization rotation. Magnetic fields can be calculated by combining the polarimetry data with the measured plasma density profile obtained from angular filter refractometry.
We have developed a time-resolved x-ray scattering diffractometer capable of probing structural dynamics of proteins in solution with 100-ps time resolution. This diffractometer, developed on the ID14B BioCARS (Consortium for Advanced Radiation Sources) beamline at the Advanced Photon Source, records x-ray scattering snapshots over a broad range of q spanning 0.02-2.5 {angstrom}{sup -1}, thereby providing simultaneous coverage of the small-angle x-ray scattering (SAXS) and wide-angle x-ray scattering (WAXS) regions. To demonstrate its capabilities, we have tracked structural changes in myoglobin as it undergoes a photolysis-induced transition from its carbon monoxy form (MbCO) to its deoxy form (Mb). Though the differences between the MbCO and Mb crystal structures are small (rmsd < 0.2 {angstrom}), time-resolved x-ray scattering differences recorded over 8 decades of time from 100 ps to 10 ms are rich in structure, illustrating the sensitivity of this technique. A strong, negative-going feature in the SAXS region appears promptly and corresponds to a sudden > 22 {angstrom}{sup 3} volume expansion of the protein. The ensuing conformational relaxation causes the protein to contract to a volume {approx}2 {angstrom}{sup 3} larger than MbCO within {approx}10 ns. On the timescale for CO escape from the primary docking site, another change in the SAXS/WAXS fingerprint appears, demonstrating sensitivity to the location of the dissociated CO. Global analysis of the SAXS/WAXS patterns recovered time-independent scattering fingerprints for four intermediate states of Mb. These SAXS/WAXS fingerprints provide stringent constraints for putative models of conformational states and structural transitions between them.
Explore the source record for details and available documents.