Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE RANGE GIGA PA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Experimental method for in situ determination of material textures at simultaneous high pressure and high temperature by means of radial diffraction in the diamond anvil cell

We introduce the design and capabilities of a resistive heated diamond anvil cell that can be used for side diffraction at simultaneous high pressure and high temperature. The device can be used to study lattice-preferred orientations in polycrystalline samples up to temperatures of 1100 K and pressures of 36 GPa. Capabilities of the instrument are demonstrated with preliminary results on the development of textures in the bcc, fcc, and hcp polymorphs of iron during a nonhydrostatic compression experiment at simultaneous high pressure and high temperature.

36 MATERIALS SCIENCE↗

Physical Characterization of Bacterial Cellulose Produced by Komagataeibacter medellinensis Using Food Supply Chain Waste and Agricultural By-Products as Alternative Low-Cost Feedstocks

Bacterial cellulose (BC), which is a hemicellulose- and lignin-free type of cellulose with unique properties, was produced by Komagataeibacter medellinensis, a new acid-resistant bacterial strain, using not suitable human consumption and sub-valorized food supply chain waste (FSCW) and agricultural by-products, namely, rotten banana, rotten mango and cheese whey. The BC was analyzed using Fourier transform infrared (ATR-FTIR) , tensile test, atomic absorption spectroscopy and thermogravimetric analysis. The properties of the BC obtained from each culture medium used were different, ranging from a material with high resistance and stiffness (280.6 MPa, 9.4 GPa) to a material with low resistance and less stiffness (17.7 MPa, 0.8 GPa). These properties provide considerable opportunities for obtaining different materials with multiple applications, such as composite reinforcements, wound dressings and edible films. The highest production of BC was achieved with rotten banana medium, and this BC also had the highest tensile properties. Meanwhile, the BC produced from cheese whey medium had the highest maximum rate of degradation temperature at 368 °C. This research demonstrated that FSCW and agrowaste by-products are advantageous alternative feedstocks in terms of economics and environmental concerns for producing BC with multiple properties and fields of application.

36 MATERIALS SCIENCE↗

Influence of Oxygen on the Tribomechanical Properties of Single Crystals of YBa{sub 2}Cu{sub 3}O{sub 7−δ}

This paper reports a study on the mechanical and tribological properties of ab- and a (b) c−planes of YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystals. The single crystals were grown using a CuO-BaO self-flux method. The oxygenation effect on the mechanical and tribological properties of ab- and a (b) c−planes is reported. For the ab- plane, the hardness and elastic modulus were around 6 and 50 GPa, respectively. In this case, significant differences were not observed among the hardness and elastic modulus at different oxygenation states. However, the hardness and elastic modulus for as-grown and oxygenated YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystals were different from that of the a (b) c−plane, and were observed to be slightly higher for the as-grown than for the oxygenated samples. For as-grown and oxygenated samples, we observed hardness values around 4.7 and 2.0 GPa, respectively. Regarding the elastic modulus, the values were 75 and 40 GPa, respectively. The indentation fracture toughness values on the ab- plane for the as-grown and oxygenated YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystal were 3.7 ± 1.2 and 2.9 ± 1.2 MPa m{sup 1/2}, respectively. For the ab- plane, the scratch resistance of the as-grown sample was higher than that of the oxygenated sample and the scratches under load were deeper for the oxygenated sample. As regards the a (b) c−plane, the scar features were seemingly constant through all the scratch lengths and the scratches under load were deeper and larger for the oxygenated than that for the as-grown sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tensile, Creep, and Fatigue Behaviors of 3D-Printed Acrylonitrile Butadiene Styrene

Acrylonitrile butadiene styrene (ABS) is a widely used thermoplastics in 3D printing. However, there is a lack of thorough investigation of the mechanical properties of 3D-printed ABS components, including orientation-dependent tensile strength and creep fatigue properties. In this work, a systematic characterization is conducted on the mechanical properties of 3D-printed ABS components. Specifically, the effect of printing orientation on the tensile and creep properties is investigated. The results show that, in tensile tests, the 0° printing orientation has the highest Young’s modulus of 1.81 GPa, and ultimate strength of 224 MPa. In the creep test, the 90° printing orientation has the lowest k value of 0.2 in the plastics creep model, suggesting 90° is the most creep resistant direction. In the fatigue test, the average cycle number under load of 30 N is 3796 cycles. The average cycle number decreases to 128 cycles when the load is 60 N. Using the Paris law, with an estimated crack size of 0.75 mm, and stress intensity factor is varied from 352 to 700 N√m, the derived fatigue crack growth rate is 0.0341 mm/cycle. This study provides important mechanical property data that is useful for applying 3D-printed ABS in engineering applications.

36 MATERIALS SCIENCE↗

Densification, Microstructural Evolution, Mechanical Properties and Oxidation Study of CrB{sub 2} + EuB{sub 6} Composite

This paper reports the results of investigation on densification, microstructural evolution, mechanical properties and oxidation study of CrB{sub 2} + EuB{sub 6} composite. CrB{sub 2} + EuB{sub 6} (10 and 20 wt.%) composites have been fabricated by hot pressing at a temperature of 1700 °C and 35 MPa pressure. The hardness and flexural strength were measured in the range of 21.25-24.48 GPa and 171-199 MPa, respectively. The fracture toughness increased from 3.3 to 4.01 MPa m{sup 1/2} by the addition of 20% EuB{sub 6}. Microstructural evolution revealed the uniform distribution of EuB{sub 6} and absence of any reaction product. Fracture surface analysis confirmed the presence of transgranular mode of fracture. Oxidation study at 1200 °C revealed that the developed composites have good oxidation resistance and followed the parabolic rate of oxidation.

36 MATERIALS SCIENCE↗

Mechanical and Tribological Behavior of ZrB{sub 2}-TiB{sub 2} System Prepared by Mechanical Activation Spark Plasma Sintering Technique

ZrB{sub 2}-TiB{sub 2} system among varying amount of TiB{sub 2} loading (5, 10, 15, 20 and 30 wt.%) was prepared by mechanical activation spark plasma sintering at 2100 °C for 15-min dwell time under 50 MPa uniaxial pressure in argon atmosphere. The effect of the TiB{sub 2} loading on properties like physical, mechanical and tribological of the prepared samples was studied and evaluated with monolithic ZrB{sub 2} ceramic. Finally, almost fully dense samples (> 96% of theoretical density) were fabricated. Microstructural observation and XRD phase analysis of sintered compact revealed that TiB{sub 2} completely went into the ZrB{sub 2} structure by formation of solid solution with ZrB{sub 2} phase. ZrB{sub 2}-TiB{sub 2} (30 wt.%) showed the highest Vickers micro-hardness (H{sub V}) of 20.64 GPa at 10 N load. On addition of TiB{sub 2}, the fracture toughness of the ZrB{sub 2}-TiB{sub 2} improved up to 4.69 ± 0.43 MPa m{sup 1/2} over monolithic ZrB{sub 2} at 10 N load. At 10 N load, the scratch resistance coefficient, wear rate and wear resistance coefficient of ZrB{sub 2}-TiB{sub 2} (30 wt.%) reached a lowest value of 0.32, 0.35 mm{sup 3}/N m and 0.008, respectively, at 10 N load than other ZrB{sub 2} compositions.

36 MATERIALS SCIENCE↗

Experimental and theoretical high pressure study of calcium hydroxyaluminate phases

Five calcium hydroxyaluminate phases have been investigated by synchrotron powder diffraction at high-pressure: two hydrogarnets, kuzelite, stratlingite and ettringite. The obtained bulk modulus, K{sub 0}, for kuzelite, stratlingite and ettringite were 23(1), 27(1) and 30(3) GPa, respectively. Kuzelite and stratlingite underwent transformations above 1 GPa likely releasing interlayer water. Kuzelite becoming markedly amorphous and stratlingite remained crystalline, K{sub 0} = 58(6) GPa in the 1.5–5.5 GPa pressure range. The structural behavior for hydrogarnet samples is prone to the use of pressure transmitting media. K{sub 0} for Ca{sub 3}Al{sub 2}(OH){sub 12} was 81(2) and 76(2) GPa for silicone oil and alcohol mixture, respectively. A similar study for Ca{sub 3}Al{sub 1.7}Fe{sub 0.3}(OH){sub 12} yielded 73(1) and 58(1) GPa for silicone oil and alcohol mixture, respectively. Atomistic calculations using periodic Density Functional Theory showed that the softening in iron-doped katoite, when compared to stoichiometric katoite, can be assigned primarily to greater compressibility of Ca−O dodecahedra, which overcompensates strengthening of hydrogen bonding between Al/Fe hydroxide groups.

36 MATERIALS SCIENCE↗

Phase transitions of LiAlO{sub 2} at high pressure and high temperature

This work presents a comprehensive study on phase transitions in LiAlO{sub 2} system at high pressures and temperatures (0.5-5.0 GPa and 300-1873 K, respectively), as well as the phase stability for polymeric phases of LiAlO{sub 2} in the studied P-T space by X-ray diffraction (XRD). Besides the previously described polymorphic hexagonal {alpha}-phase, orthorhombic {beta}-phase and tetragonal {delta}-phase, a possible new phase of LiAlO{sub 2} was observed after the tetragonal {gamma}-LiAlO{sub 2} sample was treated at 5.0 GPa and 389 K. The stable regimes of these high-pressure phases were defined through the observation of coexistence points of the polymeric phases. Our results revealed that LiAlO{sub 2} could experience structural phase transitions from {gamma}-LiAlO{sub 2} to its polymorphs at lower pressures and temperatures compared to the reported results. Hexagonal {alpha}-LiAlO{sub 2} with highly (003) preferential orientation was prepared at 5.0 GPa and 1873 K. - Graphical abstract: Constructing the pressure-temperature phase diagram for LiAlO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and crystal structure of the high-pressure iron borate {alpha}-FeB{sub 2}O{sub 4}

The high-pressure iron borate {alpha}-FeB{sub 2}O{sub 4} was synthesized under high-pressure and high-temperature conditions in a Walker-type multianvil apparatus at 7.5 GPa and 1100 deg. C. The monoclinic iron borate crystallizes with eight formula units in the space group P2{sub 1}/c with the lattice parameters a=715.2(2), b=744.5(2), c=862.3(2) pm, and {beta}=94.71(3){sup o}. The compound is built up exclusively from corner-sharing BO{sub 4}-tetrahedra, isotypic to the monoclinic phases {beta}-SrGa{sub 2}O{sub 4}, CaAl{sub 2}O{sub 4}-II, and CaGa{sub 2}O{sub 4}. Additionally, the structure is closely related to the orthorhombic compound BaFe{sub 2}O{sub 4}. The structure consists of layers of six-membered rings, which are interconnected to a three-dimensional network. The iron cations are coordinated by six and seven oxygen atoms. Next to synthesis and crystal structure of the new high-pressure borate, structural coherences to other structure types are discussed. - Abstract: High-pressure/high-temperature synthesis (multianvil technique) led to the new phase {alpha}-FeB{sub 2}O{sub 4}, which is exclusively built up from corner-sharing BO{sub 4}-tetrahedra, isotypic to the monoclinic phases {beta}-SrGa{sub 2}O{sub 4}, CaAl{sub 2}O{sub 4}-II, and CaGa{sub 2}O{sub 4}. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase stability of some actinides with brannerite structure at high pressures

Structure behavior of actinide brannerites ThTi{sub 2}O{sub 6}, Y{sub 0.5}U{sub 0.5}Ti{sub 1.5}Nb{sub 0.5}O{sub 6} and their analog oxide CeTi{sub 2}O{sub 6} was studied at high pressure by using in situ x-ray diffraction, Raman scattering and infra-red absorption techniques, respectively. Brannerite structure was found to be not stable and started to become amorphous at pressures above 20 GPa. Some minor crystalline phase(s) due to phase decomposition was observed in all the three samples during pressurization. In addition, the observed bulk modulus indicated that the actinide-bearing brannerites are more compressible than their analog compound CeTi{sub 2}O{sub 6}, which may be related to the asymmetric 5f electron orbits of actinide elements. - Graphical abstract: Actinide-bearing compounds with brannerite structure and their analog CeTi{sub 2}O{sub 6} are not stable at high pressure. They were amorphized after {approx}20 GPa and a minor pressure-induced phase transition or decomposition process was always observed before amorphization. Highlights: > Phase stability of three brannerites CeTi{sub 2}O{sub 6}, ThTi{sub 2}O{sub 6}, and (U,Y)(Ti,Nb){sub 2}O{sub 6} at high pressures. > Brannerite structure was not stable and became amorphous after {approx}20 GPa. > Actinide-bearing brannerites are easier compressed than their analog compound CeTi{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The new high-pressure borate Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O-Formation of edge-sharing BO{sub 4} tetrahedra in a hydrated borate

The new borate hydrate Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O was synthesized under high-pressure/high-temperature conditions of 6 GPa and 880 Degree-Sign C in a Walker-type multianvil apparatus. The compound crystallizes in the orthorhombic space group Pbam (Z=2) with the lattice parameters a=819.0(2), b=2016.9(4), c=769.9(2) pm, V=1.2717(4) nm{sup 3}, R{sub 1}=0.0758, wR{sub 2}=0.0836 (all data). The new structure type of Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O is built up from corner-sharing BO{sub 4} tetrahedra forming corrugated layers, that are interconnected among each other by two edge-sharing BO{sub 4} tetrahedra (B{sub 2}O{sub 6} units) forming Z-shaped channels. Interestingly, the here presented structure of Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O is closely related to the structures of M{sub 6}B{sub 22}O{sub 39}{center_dot}H{sub 2}O (M=Fe, Co), which exhibit BO{sub 4} tetrahedra in an intermediate state on the way to edge-sharing BO{sub 4} tetrahedra. - Graphical Abstract: The new high-pressure borate hydrate Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O is built up from corner-sharing BO{sub 4} tetrahedra forming corrugated layers, that are interconnected among each other by two edge-sharing BO{sub 4} tetrahedra (B{sub 2}O{sub 6} units). In this paper we report on synthesis, structural details, and properties of the new compound Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O. Highlights: Black-Right-Pointing-Pointer High-pressure/high-temperature synthesis of the new borate hydrate Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O. Black-Right-Pointing-Pointer In the structure of Co{sub 7}B{sub 24}O{sub 42}(OH){sub 2}{center_dot}2 H{sub 2}O, two B{sub 2}O{sub 6} units are connected to 'vierer' rings. Black-Right-Pointing-Pointer Pressure favours the formation of edge-sharing BO{sub 4} tetrahedra in the chemistry of borates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ non-ambient X-ray diffraction studies of indium tungstate

In situ variable temperature and high pressure X-ray diffraction studies were carried out on indium tungstate (In{sub 2}W{sub 3}O{sub 12}). This material displays positive volume expansion in both its low temperature monoclinic and high temperature orthorhombic phases, with negative thermal expansion along the a axis and positive thermal expansion along the b and c axes. Upon hydrostatic compression in a diamond anvil cell, one crystalline to crystalline phase transition is observed in the range 1.9 to 2.7 GPa, and progressive irreversible amorphization occurs at pressures above 4.3 GPa. The crystalline high pressure phase appears to be isostructural to previously observed high pressure phases in other A{sub 2}M{sub 3}O{sub 12} compounds. - Graphical abstract: Variable pressure X-ray diffraction patterns of In{sub 2}W{sub 3}O{sub 12} collected in a diamond anvil cell. A phase transition is clearly observed between 2.2 and 2.7 GPa, followed by irreversible amorphization. Highlights: Black-Right-Pointing-Pointer The structure of In{sub 2}W{sub 3}O{sub 12} was studied as a function of temperature and pressure. Black-Right-Pointing-Pointer Uniaxial negative thermal expansion was observed above 250 Degree-Sign C. Black-Right-Pointing-Pointer A pressure-induced phase transition occurred between 2.2 and 2.7 GPa. Black-Right-Pointing-Pointer Pressure-induced irreversible amorphization was observed above 4.3 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure BaCrO{sub 3} polytypes and the 5H–BaCrO{sub 2.8} phase

Polytypism of BaCrO{sub 3} perovskites has been investigated at 900–1100 °C and pressures up to 22 GPa. Hexagonal 5H, 4H, and 6H perovskites are observed with increasing pressure, and the cubic 3C perovskite (a=3.99503(1) Å) is observed in bulk form for the first time at 19–22 GPa. An oxygen-deficient material with limiting composition 5H–BaCrO{sub 2.8} is synthesised at 1200 °C under ambient pressure. This contains double tetrahedral Cr{sup 4+} layers and orders antiferromagnetically below 260 K with a (0 0 1/2) magnetic structure. - Graphical abstract: Hexagonal 5H, 4H, and 6H perovskites polytypes of BaCrO{sub 3} are observed with increasing pressure and the cubic 3C perovskite is stabilised in bulk form for the first time at 19–22 GPa. Oxygen-deficient 5H–BaCrO{sub 2.8} synthesised at ambient pressure contains double tetrahedral Cr{sup 4+} layers and orders antiferromagnetically below 260 K with a (0 0 1/2) magnetic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced phase transitions of hexagonal perovskite-like oxides

We have stabilized two new cubic (3C structured) A{sub 2}B′B′′O{sub 6}-type double-perovskite phases, Ba{sub 2}CoSbO{sub 6} and Ba{sub 2}ZnTeO{sub 6}, by means of a high-pressure heat-treatment of corresponding hexagonal (6H and 12R structured, respectively) non-perovskite phases at 4 GPa and 1000 °C. Similar treatments on hexagonal Ba{sub 2}TiMnO{sub 6} (12R) and Ba{sub 2}NiTeO{sub 6} (12R) phases did not yield the 3C double-perovskite structure but converted the 12R structure to the 6H structure. The pressure-induced phase conversion in each A{sub 2}B′B′′O{sub 6} system apparently goes from the 12R structure towards the 6H and 3C structures with increasing pressure, where the pressure ranges required most likely depend (among other possible factors) on the tolerance factor for the particular combination of A, B′ and B′′. We foresee that yet a number of novel B-site ordered double-perovskite compounds are to be discovered through the high-pressure high-temperature treatment. - Graphical abstract: High-pressure (HP) heat-treatment is an efficient tool to synthesize novel B-site ordered double-perovskite materials. This is demonstrated for two new cubic (3C structured) perovskite phases, Ba{sub 2}CoSbO{sub 6} and Ba{sub 2}ZnTeO{sub 6}, obtained through a HP conversion of corresponding hexagonal (6H and 12R structured, respectively) non-perovskite phases at 4 GPa and 1000 °C. Similar treatments on hexagonal Ba{sub 2}TiMnO{sub 6} (12R) and Ba{sub 2}NiTeO{sub 6} (12R) phases yield the intermediate 6H structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A first-principles study on new high-pressure metastable polymorphs of MoO{sub 2}

The pressure-dependence of the stabilities of several MoO{sub 2} phases has been investigated by density-functional theory (GGA/PBE/PAW). Out of a set of 15 MX{sub 2} structures, the [SnO{sub 2}(II)], [α-PbO{sub 2}], and a modified rutile structure type were identified as possible metastable MoO{sub 2} polymorphs based on the analysis of thermodynamic properties and dynamic stability. High-pressure calculations suggest an orthorhombic TiO{sub 2} structure, dubbed [ortho-TiO{sub 2}], as a high-pressure polymorph at around 25 GPa. Furthermore, we find that the previously reported rutile-type MoO{sub 2} may be understood as a modified rutile type similar to the [VO{sub 2}] structure. - Graphical abstract: First-principles electronic structure and thermochemical calculations reveal four structure candidates as possible metastable polymorphs of MoO{sub 2}. Most promising is a distorted rutile-type similar to the known [VO{sub 2}] structure. An orthorhombic polymorph is proposed as a high-pressure polymorph. Display Omitted - Highlights: • Three possible metastable structure candidates for MoO{sub 2}. • Undistorted rutile type is improbable, a new distorted rutile-type MoO{sub 2} was suggested. • Orthorhombic phase of MoO{sub 2} (ortho-TiO{sub 2} type) should form at 25 GPa. • ab initio thermochemical data provided for MoO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High pressure structure studies of 6H-SrIrO{sub 3} and the octahedral tilting in 3C-SrIrO{sub 3} towards a post-perovskite

The high pressure behaviors of the two perovskite structures (hexagonal 6H-SrIrO{sub 3} and orthorhombic 3C-SrIrO{sub 3}) have been studied in diamond anvil cells to 43 and 60 GPa, respectively, using synchrotron powder X-ray diffraction. 6H-SrIrO{sub 3} was first synthesized at ambient pressure and subsequently transformed into 3C-SrIrO{sub 3} in a large volume press at 8.8 GPa and 1000 °C. Both polymorphs were found to retain the initial symmetry up to the highest pressures measured, but in the case of 6H-SrIrO{sub 3}, two anomalies were identified: a change in the axial compressibilities at 24 GPa and a change in both the axial and volume compressibilities at 32 GPa. Fitting a 3rd order Birch-Murnaghan equation of state to the obtained P-V data yielded bulk moduli of K{sub 0}=151.5(12) GPa (fitted range 0<P<30 GPa) for 6H-SrIrO{sub 3} and K{sub 0}=187.1(9) GPa for 3C-SrIrO{sub 3}. Analysis of the structural parameters for 6H-SrIrO{sub 3} aided by F-f plots suggests the anomalies are caused by changes in the compression mechanism. Comparison of the two polymorphs reveals that 6H-SrIrO{sub 3} becomes less compressible than 3C-SrIrO{sub 3} above 32 GPa as a result of the mechanistic change, and a crossing of their P-V curves is avoided. For 3C-SrIrO{sub 3}, analysis of the octahedral tilt angles shows that these increase monotonically from the ambient value of 7.23(6) to 23.0(2)° at 60 GPa suggesting that a transition to a post-perovskite is approached. - Graphical abstract: The structure of 3C-SrIrO{sub 3} synthesized at high pressure has been studied in a diamond anvil cell and is found to maintain its orthorhombic structure up to 60 GPa but distorts drastically due to octahedral tilting, strongly suggesting that a post-perovskite transition is possible. The compression is compared to 6H-SrIrO{sub 3} synthesized at ambient pressure, which is initially found to be more compressible but undergoes changes in its compression mechanism and 3C remains denser throughout compression. Display Omitted - Highlights: • Structures of 6H- and 3C-SrIrO{sub 3} were studied to pressures of 43 and 60 GPa, respectively. • Both structures maintain the initial symmetry up to the highest pressures measured. • 6H-SrIrO{sub 3} is initially more compressible than 3C-SrIrO{sub 3}. • Due to changes in the compression mechanism in 6H-SrIrO{sub 3} the 3C-SrIrO{sub 3} remains denser throughout. • 3C-SrIrO{sub 3} show large octahedral tilting, strongly suggesting a post-perovskite transition is imminent.

36 MATERIALS SCIENCE↗

High-pressure behaviour of Cs{sub 2}V{sub 3}O{sub 8} fresnoite

Crystal structure of Cs{sub 2}V{sub 3}O{sub 8} fresnoite (P4bm, Z=2) has been studied using single-crystal X-ray diffraction in a diamond anvil cell to 8.6 GPa at room temperature. Cs{sub 2}V{sub 3}O{sub 8} undergoes a reversible first-order phase transition at about 4 GPa associated with anomalies in the pressure dependencies of the lattice parameters and unit-cell volume but without any symmetry change. Both structures consist of layers of corner-sharing V{sup 5+}O{sub 4} tetrahedra and V{sup 4+}O{sub 5} tetragonal pyramids separated by the Cs{sup +} cations located between the layers. At low pressures, the compression has little effect on the polarity of the structure. Above 4 GPa, the pseudosymmetry with respect to the corresponding centrosymmetric space group P4/mbm abruptly increases. The effects of external pressure and of the A{sup +} cation substitution in the vanadate fresnoites A{sub 2}V{sub 3}O{sub 8} (A{sup +}: K{sup +}, Rb{sup +}, NH{sub 4}{sup +}, Cs{sup +}) are discussed. - Graphical abstract: Non-centrosymmetric Cs{sub 2}V{sub 3}O{sub 8} undergoes a reversible first-order phase transition at about 4 GPa associated with an abrupt change of the pseudosymmetry with respect to the centrosymmetric space group P4/mbm. Display Omitted - Highlights: • High-pressure behaviour of vanadate fresnoites depends on alkali metal cations. • The size of the alkali metal cation determines whether the high-pressure phase is centrosymmetric. • No incommensurate structures are observed upon compression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The structural response of gadolinium phosphate to pressure

Accurate elastic constants for gadolinium phosphate (GdPO{sub 4}) have been measured by single-crystal high-pressure diffraction methods. The bulk modulus of GdPO{sub 4} determined under hydrostatic conditions, 128.1(8) GPa (K′=5.8(2)), is markedly different from that obtained with GdPO{sub 4} under non-hydrostatic conditions (160(2) GPa), which indicates the importance of shear stresses on the elastic response of this phosphate. High pressure Raman and diffraction analysis indicate that the PO{sub 4} tetrahedra behave as rigid units in response to pressure and that contraction of the GdPO{sub 4} structure is facilitated by bending/twisting of the Gd–O–P links that result in increased distortion in the GdO{sub 9} polyhedra. - Graphical abstract: A high-pressure single crystal diffraction study of GdPO{sub 4} with the monazite structure is presented. The elastic behaviour of rare-earth phosphates are believed to be sensitive to shear forces. The bulk modulus of GdPO{sub 4} measured under hydrostatic conditions is 128.1(8) GPa. Compression of the structure is facilitated by bending/twisting of the Gd−O−P links that result in increased distortion in the GdO{sub 9} polyhedra. Display Omitted - Highlights: • The elastic responses of rare-earth phosphates are sensitive to shear forces. • The bulk modulus of GdPO{sub 4} measured under hydrostatic conditions is 128.1(8) GPa. • Twisting of the inter-polyhedral links allows compression of the GdPO{sub 4} structure. • Changes to the GdO{sub 9} polyhedra occur in response to pressure (<7.0 GPa).

36 MATERIALS SCIENCE↗