Numerical tests of the weak pressure gradient approximation
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The spatial and temporal evolution of the total pedestal pressure profile has been measured during the pedestal evolution between successive edge localized modes (ELMs) of type-I ELMing H-mode discharges in DIII-D. Measurements are used to test a model that predicts that kinetic ballooning modes (KBMs) provide a strong constraint on the pedestal pressure gradient obtained during an inter-ELM cycle and cause the pedestal width to scale as the square root of the pedestal poloidal beta. Discharges in two different parameter regimes are examined for evidence that the evolution of the pressure gradient reaches a limit prior to the onset of an ELM. Both discharges show evidence of rapid evolution of the pressure profile very early in the recovery phase from an ELM. In one discharge, the pressure gradient reached approximate steady state within similar to 3 ms after the ELM event. In the other discharge, the pressure gradient just inboard of the last closed flux surface reached steady state early in the ELM recovery phase even as the pedestal expanded into the core and the maximum pressure gradient continued to rise during the remainder of the ELM cycle. Simple quantitative theoretical metrics show that pressure gradients in both discharges reached levels that were large enough to excite KBMs. In addition, the peeling-ballooning theory for the onset of type-I ELMs and the EPED1 model for pedestal height and width make predictions consistent with the data of both discharges.
Magnetic reconnection in the presence of background pressure gradients is studied, with special attention to parallel (compressional) magnetic fluctuations. A process is reported that reconnects fields through coupling of drift-wave-type instabilities with current sheets. Its time scale is set not by the reconnecting field but by inhomogeneities of the background density or temperature. The observed features can be attributed to a pressure-gradient-driven linear instability which interacts with the reconnecting system but is fundamentally different from microtearing. In particular, this mode relies on parallel magnetic fluctuations and the associated drift. For turbulent reconnection, similar or even stronger enhancements are reported. In the solar corona, this yields a critical pressure gradient scale length of about 200 km below which this new process becomes dominant over the tearing instability.
The logarithmic law of the wall does not capture the mean flow when a boundary layer is subjected to a strong pressure gradient. In such a boundary layer, the mean flow is affected by the spatio-temporal history of the imposed pressure gradient; and accounting for history effects remains a challenge. This work aims to develop a universal mean flow scaling for boundary layers subjected to arbitrary adverse or/and favourable pressure gradients. Here, we derive from the Navier–Stokes equation a velocity transformation that accounts for the history effects and maps the mean flow to the canonical law of the wall. The transformation is tested against channel flows with a suddenly imposed adverse or favourable pressure gradient, boundary layer flows subjected to an adverse pressure gradient, and Couette–Poiseuille flows with a streamwise pressure gradient. It is found that the transformed velocity profiles follow closely the equilibrium law of the wall.
The streaming instability provides a promising mechanism for planetesimal formation because of its ability to concentrate solids into dense clumps. The degree of clumping strongly depends on the height-integrated solid to gas mass ratio Z in protoplanetary disks. In this Letter, we show that the magnitude of the radial pressure gradient that drives the streaming instability (characterized by {Pi} {identical_to} {eta}v{sub K} /c{sub s} , where {eta}v{sub K} is the reduction of Keplerian velocity due to the radial pressure gradient and c{sub s} is the sound speed) also strongly affects clumping. We present local two-dimensional hybrid numerical simulations of aerodynamically coupled particles and gas in the midplane of protoplanetary disks. Magnetic fields and particle self-gravity are ignored. We explore three different radial pressure gradient values appropriate for typical protoplanetary disks: {Pi} = 0.025, 0.05, and 0.1. For each {Pi} value, we consider four different particle size distributions ranging from submillimeter to meter sizes and run simulations with solid abundance from Z = 0.01 up to Z = 0.07. We find that a small radial pressure gradient strongly promotes particle clumping in that: (1) at fixed particle size distribution, the critical solid abundance Z {sub crit} above which particle clumping occurs monotonically increases with {Pi} and (2) at fixed Z, strong clumping can occur for smaller particles when {Pi} is smaller. Therefore, we expect planetesimals to form preferentially in regions of protoplanetary disks with a small radial pressure gradient.
Pressure gradient driven m = 1 internal kink mode destabilization that follows an L-H transition is observed in the operational region of the EAST tokamak, which manifests in periodic oscillations in soft x-ray (SXR) and Mirnov coil signals. Using tomography with the high resolution soft x-ray detection array, we find that the rotation direction of the 1/1 kink mode is in the ion diamagnetic drift direction in poloidal cross-section. A large displacement of the hot core is attributable to the shift of the 1/1 internal kink mode. In contrast to stationary oscillations with fixed frequency, various frequency chirping behavior is observed with this 1/1 kink mode. Furthermore, we also occasionally observe that a 2/1 neoclassical tearing mode (NTM) is triggered by a 1/1 internal kink mode via mode coupling in a high-performance plasma. The spatial structure of a 2/2 mode, which is the harmonic mode of the 1/1 kink mode, is also presented in this paper. Large amounts of medium-Z impurities accumulate in the central plasma region where the 1/1 kink mode instability bursts. Finally, we also find that the frequency beating associated with a 1/1 kink mode is a consequence of plasma rotation. Based on all of these observations, we propose that the plasma pressure gradient, the driving force in kink modes, is plausibly the product of an intense concentration of impurities, which are related to plasma rotation.
The effects of pressure gradient on the existence of global Alfvén eigenmodes (GAE) in Reversed Field Pinch are studied by numerical calculation. It is found that GAEs near the plasma core can exist when pressure gradient is sufficiently large. The calculated mode frequency and structure are consistent with the experimental results in the Madison Symmetric Torus.
Results of experiments on high-voltage discharges in air with a pressure gradient are presented. The experiments were carried out at the setup developed at the Institute of Applied Physics, Russian Academy of Sciences. The goal of the experiments was laboratory modeling of high-altitude atmospheric discharges―sprites and jets. The setup and diagnostic techniques are described. The experimental results include the distribution of the gas pressure in the vacuum chamber formed by means of pulsed air puffing, photographs of discharges in air with a pressure gradient, and the dependences of the discharge current and optical emission intensity on the initial conditions.
Here, we improve upon two key aspects of the Menter shear stress transport (SST) turbulence model: (1) We propose a more robust adverse pressure gradient sensor based on the strength of the pressure gradient in the direction of the local mean flow; (2) We propose two alternative eddy viscosity models to be used in the adverse pressure gradient regions identified by our sensor. Direct numerical simulations of the Boeing Gaussian bump are used to identify the terms in the baseline SST model that need correction, and a posteriori Reynolds-averaged Navier-Stokes calculations are used to calibrate coefficient values, leading to a model that is both physics driven and data informed. The two sensor-equipped models are applied to two thick airfoils representative of modern wind turbine applications, the FFA-W3-301 and the DU00-W-212. The proposed models improve the prediction of stall (onset of separation) with respect to the prediction of the baseline SST model.
For the resistive pressure-gradient-driven turbulence model, the transition from laminar regime to fully developed turbulence is not simple and goes through several phases. For low values of the plasma parameter {beta}, a single quasicoherent structure forms. As {beta} increases, several of these structures may emerge and in turn take the dominant role. Finally, at high {beta}, fully developed turbulence with a broad spectrum is established. A suitable characterization of this transition can be given in terms of topological properties of the flow. Here, we analyze these properties that provide an understanding of the turbulence-induced transport and give a measure of the breaking of the homogeneity of the turbulence. To this end, an approach is developed that allows discriminating between topological properties of plasma turbulence flows that are relevant to the transport dynamics and the ones that are not. This is done using computational homology tools and leads to a faster convergence of numerical results for a fixed level of resolution than previously presented in Phys. Rev. E 78, 066402 (2008)
Self-similar flows of an incompressible fluid in a turbulent boundary layer, when the free-stream velocity is a power function (with the exponent m) of the longitudinal coordinate, have been studied. It has been shown that there are four different self-similar flow regimes corresponding to four individual similarity parameters one of which is the known Clauser parameter and the three other parameters have been established for the first time. At adverse pressure gradient, when the exponent m lies in a certain range depending on Reynolds number, the problem has two solutions with different values of the boundary-layer thickness and skin friction; consequently, hysteresis in a pre-separation flow is possible. Separation occurs not at the minimal value of m that corresponds to the strongest adverse pressure gradient, but at m = −0.216 −0.4 Re{sub p}{sup −1/3} + O(Re{sub p}{sup −2/3}), where Re{sub p} is the Reynolds number based on longitudinal pressure gradient. The theoretical results are in good agreement with experimental data.
By using a combination of integral and self-similarity analyses, the generalized analytical solutions for the mean transverse velocity and Reynolds shear stress are rigorously derived for the first time for the far field of planar turbulent wakes under arbitrary pressure gradients. Specifically, by assuming self-similarity for the mean axial velocity, the analytical formulation for the mean transverse velocity is obtained from the integral of the mean continuity equation, and the analytical formulation for the Reynolds shear stress is obtained from the integral of the momentum equation. The generalized analytical formulations for the mean transverse velocity and Reynolds shear stress consist of multiple components, each with its unique scale and physical mechanism. In the zero pressure gradient limit, the generalized formulations recover the single-scale equations reported by Wei, Liu, and Livescu. Furthermore, simpler approximate formulations for the mean transverse velocity and Reynolds shear stress are also obtained, and show excellent agreement with the experimental measurements. Here, the findings provide new insights into the properties of planar turbulent wakes under pressure gradients, filling some long-standing gaps in the existing literature.
Abstract Singular currents typically appear on rational surfaces in non-axisymmetric ideal magnetohydrodynamic (MHD) equilibria with a continuum of nested flux surfaces and a continuous rotational transition. These currents have two components: a surface current (Dirac δ -function in flux surface labeling) that prevents the formation of magnetic islands, and an algebraically divergent Pfirsch–Schlüter current density when a pressure gradient is present across the rational surface. On flux surfaces adjacent to the rational surface, the traditional treatment gives the Pfirsch–Schlüter current density scaling as J ∼ 1 / Δ ι , where Δ ι is the difference of the rotational transform relative to the rational surface. If the distance s between flux surfaces is proportional to Δ ι , the scaling relation J ∼ 1 / Δ ι ∼ 1 / s will lead to a paradox that the Pfirsch–Schlüter current is not integrable. In this work, we investigate this issue by considering the pressure-gradient-driven singular current in the Hahm–Kulsrud–Taylor problem, which is a prototype for singular currents arising from resonant magnetic perturbations. We show that not only the Pfirsch–Schlüter current density but also the diamagnetic current density are divergent as ∼ 1 / Δ ι . However, due to the formation of a Dirac δ -function current sheet at the rational surface, the neighboring flux surfaces are strongly packed with s ∼ ( Δ ι ) 2 . Consequently, the singular current density J ∼ 1 / s , making the total current finite, thus resolving the paradox. Furthermore, the strong packing of flux surfaces causes a steepening of the pressure gradient near the rational surface, with ∇ p ∼ d p / d s ∼ 1 / s . In general non-axisymmetric MHD equilibrium, contrary to Grad’s conjecture that the pressure profile is flat around densely distributed rational surfaces, our result suggests a pressure profile that densely steepens around them.
Probability density function (PDF) methods are extended to variable-density pressure-gradient-driven turbulence. We apply the new method to compute the joint PDF of density and velocity in a non-premixed binary mixture of different-density molecularly mixing fluids under gravity. The full time-evolution of the joint PDF is captured in the highly non-equilibrium flow: starting from a quiescent state, transitioning to fully developed turbulence and finally dissipated by molecular diffusion. High-Atwood-number effects (as distinguished from the Boussinesq case) are accounted for: both hydrodynamic turbulence and material mixing are treated at arbitrary density ratios, with the specific volume, mass flux and all their correlations in closed form. An extension of the generalized Langevin model, originally developed for the Lagrangian fluid particle velocity in constant-density shear-driven turbulence, is constructed for variable-density pressure-gradient-driven flows. The persistent small-scale anisotropy, a fundamentally 'non-Kolmogorovian' feature of flows under external acceleration forces, is captured by a tensorial diffusion term based on the external body force. The material mixing model for the fluid density, an active scalar, is developed based on the beta distribution. The beta-PDF is shown to be capable of capturing the mixing asymmetry and that it can accurately represent the density through transition, in fully developed turbulence and in the decay process. The joint model for hydrodynamics and active material mixing yields a time-accurate evolution of the turbulent kinetic energy and Reynolds stress anisotropy without resorting to gradient diffusion hypotheses, and represents the mixing state by the density PDF itself, eliminating the need for dubious mixing measures. Direct numerical simulations of the homogeneous Rayleigh-Taylor instability are used for model validation.
The aim of this study was to analyze the feedback process between the magnetic turbulence and the pressure gradients in Large Helical Device (LHD) inward-shifted configurations as well as its role in the transition between the soft-hard magnetohydrodynamic (MHD) regimes for instabilities driven by the mode 1/2 in the middle plasma. In the present paper, we summarize the results of two simulations with different Lundquist numbers, S=2.5×10{sup 5} and 10{sup 6}, assuming a plasma in the slow reconnection regime. The results for the high Lundquist number simulation show that the magnetic turbulence and the pressure gradient in the middle plasma region of LHD are below the critical value to drive the transition to the hard MHD regime, therefore only relaxations in the soft MHD limit are triggered (1/2 sawtooth-like events) [Phys. Plasmas 19, 082512 (2012)]. In the case of the simulation with low Lundquist number, the system reaches the hard MHD limit and a plasma collapse is observed.
As a step toward understanding 3D magnetohydrodynamic (MHD) equilibria, for which smooth solutions may not exist, we develop a simple cylindrical model to investigate the resistive stability of MHD equilibria with alternating regions of constant and nonuniform pressure, producing states with continuous total pressure (i.e., no singular current sheets) but discontinuities in the parallel current density. We examine how the resistive stability characteristics of the model change as we increase the localization of pressure gradients at fixed radii, which approaches a discontinuous pressure profile in the zero-width limit. Equilibria with continuous pressure are found to be unstable to moderate/high-m modes and apparently tend toward ideal instability in some cases. We propose that additional geometric degrees of freedom or symmetry breaking via island formation may increase the parameter space on which equilibria of our model are physically realizable, while preserving the radial localization of pressure gradients. This is consistent with the possibility of realizing, in practice, 3D MHD equilibria which support both continuously nested flux surfaces (where ∇p ≠ 0) and chaotic field regions (where ∇p = 0)
In industrial plasma processes, flow rate has been known to a key to control plasma processing results and has been discussed with reactive radical density, gas residence time, and surface reaction. In this study, it was observed that the increase in the flow rate can also change plasma parameters (electron temperature and plasma density) and electron energy distribution function in plasma processing reactor. Based on the measurement of gas pressure between the discharge region and the pumping port region, the considerable differences in the gas pressure between the two regions were found with increasing flow rate. It was also observed that even in the discharge region, the pressure gradient occurs at the high gas flow rate. This result shows that increasing the flow rate results in the pressure gradient and causes the changes in the plasma parameters.
Direct numerical simulation (DNS) of a turbulent boundary layer over the Gaussian (Boeing) bump is performed. This boundary layer exhibits a series of adverse and favourable pressure gradients and convex and concave curvature effects before separating. These effects on turbulent boundary layers are characterised and compared with a lower-Reynolds-number flow over the same geometry. The momentum budgets are analysed in the streamline-aligned coordinate system upstream of the separation region. These momentum budgets allow the simplification of equations to facilitate an integral analysis. Integral-analysis-based approximations for Reynolds stresses in the inner and outer regions of the boundary layer are also formulated. The shear and wall-normal Reynolds stress profiles normalised by these approximations exhibit a better collapse compared with friction velocity and Zagarola–Smits normalisations in the strong favourable pressure gradient region and in the mild adverse pressure region that precedes it in this flow. Simplification of these Reynolds stress approximations along with results from the DNS are used to obtain semi-empirical approximations that are able to provide stress closure in terms of wall solution fields for the turbulent boundary layer under consideration.