Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLYISOPRENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Melt State Reinforcement of Polyisoprene by Silica Nanoparticles Grafted with Polyisoprene

Here, we systematically vary the nanoparticle (NP) dispersion state in composites formed by mixing polyisoprene homopolymers with polyisoprene grafted silica particles, and demonstrate how creep measurements allow us to overcome the limitations of small amplitude oscillatory shear (SAOS) experiments. This allows us to access nearly 13 orders in time in the mechanical response of the resulting composites. We find that a specific NP morphology, a percolating particle network achieved at intermediate graft densities, significantly reinforces the system and has a lower NP percolation loading threshold relative to other morphologies. These important effects of morphology only become apparent when we combine creep measurements with SAOS re-emphasizing the role of synergistically combining methods to access the mechanical properties of polymer nanocomposites over broad frequency ranges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bio-Based Polyisoprene Can Mitigate Climate Change and Deforestation in Expanding Rubber Production

Biomass is a promising renewable feedstock to produce polyisoprene for the rubber industry. Through metabolic engineering, sugars derived from pretreated and hydrolyzed cellulose and hemicellulose can be directly fermented to isoprene to produce rubber. Here we investigate the life cycle environmental impact of isoprene fermentation to produce bio-polyisoprene from agricultural residues (of Zea mays L.). Results show that the greenhouse gas (GHG) intensity of bio-polyisoprene (−4.59 kg CO2e kg−1) is significantly lower than that of natural rubber (Hevea brasiliensis) and synthetic rubber (−0.79 and 2.41 kg CO2e kg−1, respectively), while supporting a circular biogenic carbon economy. We found the land use intensity of bio-polyisoprene to be 0.25 ha metric ton−1, which is 84% lower than that from rubber tree plantations. We compare the direct fermentation to isoprene results with indirect fermentation to isoprene through the intermediate, methyl butyl ether, where dehydration to isoprene is required. The direct fermentation of isoprene reduces reaction steps and unit operations, an expected outcome when employing process intensification, but our results show additional energy conservation and reduced contribution to climate change. Among the ReCiPe life cycle environmental impact metrics evaluated, air emission related impacts are high for bio-polyisoprene compared to those for natural and synthetic rubber. Those impacts can be reduced with air emission controls during production. All other metrics showed an improvement for bio-polyisoprene compared to natural and synthetic rubber.

Batten, Rahamim↗

Converting polyisoprene rubbers into bio-jet fuels via a cascade hydropyrolysis and vapor-phase hydrogenation process

Producing alternative drop-in bio-jet fuels from biomass provides a promising approach to achieve carbon neutrality. Here, to upcycle biomass-based polyisoprene rubbers into jet-fuel range C 10 cycloalkane, we proposed a cascade hydropyrolysis and vapor-phase hydrogenation process in a flow-through two-stage pressurized fixed-bed reactor. The hydropyrolysis temperature in the first stage is of vital importance for the formation of primary limonene intermediate in the non-catalytic degradation of polyisoprene rubbers, and a reaction temperature of 460 °C maximized limonene yield to 588.6 mg/g for natural rubber and 546.2 mg/g for Eucommia rubber. Over a Pt/C catalyst loaded in the second stage, the limonene intermediate produced from the first-stage reactor can be completely hydrogenated, giving a 642.7 mg/g yield of jet-fuel range C 10 cycloalkane with 83.6% selectivity. The depolymerization mechanism of polyisoprene rubbers was thoroughly studied, and a competitive reaction between limonene hydrogenation and limonene dehydrogenation was observed. This is the first report on producing C 10 cycloalkane from natural rubbers via a cascade hydropyrolysis and hydrogenation process, providing a promising strategy to upcycle polyisoprene rubbers into bio-jet fuels.

30 DIRECT ENERGY CONVERSION↗

Multiscale modeling of polyisoprene on graphite

The local dynamics and the conformational properties of polyisoprene next to a smooth graphite surface constructed by graphene layers are studied by a multiscale methodology. First, fully atomistic molecular dynamics simulations of oligomers next to the surface are performed. Subsequently, Monte Carlo simulations of a systematically derived coarse-grained model generate numerous uncorrelated structures for polymer systems. A new reverse backmapping strategy is presented that reintroduces atomistic detail. Finally, multiple extensive fully atomistic simulations with large systems of long macromolecules are employed to examine local dynamics in proximity to graphite. Polyisoprene repeat units arrange close to a parallel configuration with chains exhibiting a distribution of contact lengths. Efficient Monte Carlo algorithms with the coarse-grain model are capable of sampling these distributions for any molecular weight in quantitative agreement with predictions from atomistic models. Furthermore, molecular dynamics simulations with well-equilibrated systems at all length-scales support an increased dynamic heterogeneity that is emerging from both intermolecular interactions with the flat surface and intramolecular cooperativity. This study provides a detailed comprehensive picture of polyisoprene on a flat surface and consists of an effort to characterize such systems in atomistic detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemiluminescence Study of the Autoxidation of cis-1,4-Polyisoprene

The free-radical mechanism for the autoxidation of cis-1,4-polyisoprene (natural rubber or its synthetic counterpart) has been investigated extensively. An important feature of this mechanism, and indeed also of the autoxidation of hydrocarbons generally, is that it is a chain process propagated by alkyl and peroxy radicals and terminated through bimolecular reactions involving these same radicals. In the usual oxidation situation, that is, at all oxygen pressures greater than a few torr, the alkyl radicals are rapidly converted to peroxy radicals, and the termination step proceeds almost exclusively through the latter radicals. The bimolecular decay of the peroxy radicals is accompanied by a weak emission of light or chemiluminescence. Kinetic evidence is consistent with an electronically excited ketone produced in the termination reaction as the source of the emission. The first observation of chemiluminescence from the oxidative degradation of polymers was reported by Ashby, who dealt mainly with polypropylene but made passing mention of several other polymers. Subsequently, a number of papers have appeared dealing with oxidative chemiluminescence from a variety of polymers. In this paper we report the first detailed study of the chemiluminescence emitted in the autoxidation of cis-1,4-polyisoprene. The chemiluminescence technique is extremely sensitive and can follow rates of oxidation that are too slow to be measured conveniently by other means. This work thus offered the potential of throwing new light on the autoxidation of cis-1,4-polyisoprene, especially in the very early stages or under ambient conditions where conventional spectroscopic procedures are rather insensitive.

Mendenhall, G. David↗

A new approach to the study of the structure of polyisoprene obtained by cationic polymerization

The use of the T{sub 2} filter in NMR studies allowed us to separate carbon atoms by their mobility in different fragments of the macromolecular chain of polyisoprene synthesized by cationic polymerization. The NMR signals of terminal units with conjugated double bonds were identified for the first time for the “cationic” polyisoprene, which experimentally confirmed the transfer of the growing chain to the monomer in the process of cationic polymerization of isoprene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear magnetic resonance study of thermal oxidation of polyisoprene

An investigation was conducted concerning the microstructural changes occurring in cis- and trans-1,4-polyisoprenes during uncatalized thermal oxidation in the solid phase. The investigation made use of approaches based on proton and carbon-13 NMR spectroscopy. The oxidation of squalene and dihydromyrcene in the liquid phase was also studied. The studies provide the first NMR spectroscopic evidence for the presence of epoxy and peroxide, hydroperoxide, and alcohol groups within the oxidized polyisoprene chain.

Golub, M. A.↗

Rupture Orientation and Strain-induced Crystallization of Polymer Chain and Network in Vulcanized Polyisoprene During Uniaxial Deformation by in-situ Electron Spin Resonance(ESR) and Synchrotron X-ray Analysis

Different network structures of vulcanized polyisoprene rubbers were studied by in-situ ESR and synchrotron X-ray during deformation to analyze the rupture, orientation, and strain-induced crystallization of polymer chains and network points. Rupture of network points occur, depending on network structure, and create an un-reversible change in vulcanized rubber. The flexibility of network points affects the possibility of rupture, polymer orientation and strain-induced crystallization. Peroxide vulcanized network is rigid and un-rupturable. Poly-sulfide rich vulcanized network is more flexible and less rupturable than mono-sulfide rich vulcanized network. Chain flexibility and rupturability of network points affect the strain-induced crystallization and stress-strain relation.

36 MATERIALS SCIENCE↗

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

A polyisoprene-sulfur (PIPS) copolymer and nano sulfur composite material (90 wt % sulfur) is synthesized through inverse vulcanization of PIP polymer with micrometer-sized sulfur particles for high-areal-capacity lithium sulfur batteries. The polycrystalline structure and nanodomain nature of the copolymer are revealed through high-resolution transmission electron microscopy (HRTEM). PIP polymer is also used as binders for the electrode to further capture the dissovlved polysulfides. A high areal capacity of ca. 7.0 mAh/cm 2 and stable cycling are achieved based on the PIPS nanosulfur composite with a PIP binder, crucial to commercialization of lithium sulfur batteries. The chemical confinement both at material and electrode level alleviates the diffusion of polysulfides and the shuttle effect. The sulfur electrodes, both fresh and cycled, are analyzed through scanning electron microscopy (SEM). Finally, this approach enables scalable material production and high sulfur utilization at the cell level.

25 ENERGY STORAGE↗

Influence of Pressure on Chain and Segmental Dynamics in Polyisoprene

We present detailed studies of variation in segmental and chain dynamics of polyisoprene under pressure. Samples with two molecular weights (MW), 2.4 and 25 kg/mol (below and above entanglement), were investigated. Dielectric spectroscopy measurements at isobaric and isothermal conditions exhibit clear differences in temperature and pressure dependencies of chain and segmental relaxation times. Moreover, application of pressure increases time separation between the segmental and normal (chain) modes at the isochronic conditions. This increase can be explained by an effective increase in number of Rouse segments under compression at the same segmental relaxation time. Our analysis also reveals that the thermodynamic scaling of the relaxation times (log vs TV , V is volume) does not work well simultaneously for both processes.

36 MATERIALS SCIENCE↗

Molecular-dynamics simulations of thin polyisoprene films confined between amorphous silica substrates

Constant temperature–constant pressure (NpT) molecular-dynamics computer simulations have been carried out for the united-atom model of a non-crosslinked (1,4) cis-polyisoprene (PI) melt confined between two amorphous, fully coordinated silica surfaces. The Lennard-Jones 12-6 potential was implemented to describe the polymer–silica interactions. The thickness H of the produced PI–silica film has been varied in a wide range, 1 < H/R{sub g} < 8, where R{sub g} is the individual PI chain radius of gyration measured under the imposed confinement. After a thorough equilibration, the PI film stratified structure and polymer segmental dynamics have been studied. The chain structure in the middle of the films resembles that in a corresponding bulk, but the polymer-density profile shows a pronounced ordering of the polymer segments in the vicinity of silica surfaces; this ordering disappears toward the film middles. Tremendous slowing down of the polymer segmental dynamics has been observed in the film surface layers, with the segmental relaxation more than 150 times slower as compared to that in a PI bulk. This effect increases with decreasing the polymer-film thickness. The segmental relaxation in the PI film middles shows additional relaxation process which is absent in a PI bulk. Even though there are fast relaxation processes in the film middle, its overall relaxation is slower as compared to that in a bulk sample. The interpretation of the results in terms of polymer glassy bridges has been discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Microdomain orientation by external field

In this study, block copolymer ionomers of the cesium salt (20 mol %) of fluorinated polyisoprene-blocksulfonated polystyrene were spin cast into membranes and annealed under an electric field ofw40 V/mm at 130 C for 24 h. The effect of this treatment was a 2.5 times increase in the ionic conductivity as measured by electrochemical impedance spectroscopy, under all humidity conditions measured. This can be attributed to the increased connectivity of the ionic domains of the block copolymers. This E-field alignment technique may thus find application in the fabrication of nanostructured polyelectrolytes with enhanced charge transport capacity.

36 MATERIALS SCIENCE↗

Effect of Macromolecular Architecture on the Morphology of Polystyrene–Polyisoprene Block Copolymers

The impact of block connectivity on the morphologies of four block copolymers of varying architecture containing polystyrene (PS) and polyisoprene (PI) has been studied. The volume fraction of PS and molecular weight are held constant while varying the architecture from a linear PS–PI diblock copolymer to three different miktoarm star architectures: PS2PI, PSPI2, and PS2PI2. Morphologies of the PS2PI and PSPI2 miktoarm stars are different from those observed for the linear copolymer and dependent on the connectivity of the copolymer blocks. The change in morphology with connectivity indicates that combining two chains at a junction point leads to chain crowding, where subsequent excluded volume effects drive the change in morphology for each sample. The PS2PI2 miktoarm star exhibits the same morphology as the linear diblock but with a reduction in the size of the domains. The extent of the decrease in domain size indicates that chain stretching impacts the formation of this morphology. Experimentally observed morphologies for different chain architectures are generally consistent with three-dimensional self-consistent-field theory simulations, taking into account conformational asymmetry and experimental uncertainty in the copolymer composition. Furthermore, these results generally agree with analytical theory predictions that account for architectural and conformational asymmetry.

Polymer Science↗

Enhancement of polyisoprene latex production

Production of high molecular weight polyisoprene latex is enhanced by administering to plants, particularly Guayule Plants, an amine containing at least one two-carbon chain substituent and preferably substituted trialkylamine of the general structure: ##STR1## where R.sub.4, R.sub.5 and R.sub.6 are alkyl, preferably ethyl and at least one of R.sub.4, R.sub.5 and R.sub.6 is preferably an electron withdrawing group substituted aryloxy or arylthio ethyl group.

Bauman, Albert J.↗

Effect of Macromolecular Architecture on the Morphology of Polystyrene Polyisoprene Block Copolymers

The impact of block connectivity on the morphologies of four block copolymers of varying architecture containing polystyrene (PS) and polyisoprene (PI) has been studied. The volume fraction of PS and molecular weight are held constant while varying the architecture from a linear PS-PI diblock copolymer to three different miktoarm star architectures: PS2PI, PSPI2, and PS2PI2. Morphologies of the PS2PI and PSPI2 miktoarm stars are different from those observed for the linear copolymer and dependent on the connectivity of the copolymer blocks. The change in morphology with connectivity indicates that combining two chains at a junction point leads to chain crowding, where subsequent excluded volume effects drive the change in morphology for each sample. The PS2PI2 miktoarm star exhibits the same morphology as the linear diblock but with a reduction in the size of the domains. The extent of the decrease in domain size indicates that chain stretching impacts the formation of this morphology. Experimentally observed morphologies for different chain architectures are generally consistent with three-dimensional self-consistent field theory simulations, taking into account conformational asymmetry and experimental uncertainty in the copolymer composition. Furthermore, these results generally agree with analytical theory predictions that account for architectural and conformational asymmetry.

Kumar, Rajeev↗

Plant Based Poly-functional Hindered Phenol Derivative as an Alternative for Silane in Cis-Polyisoprene and its Functionalized Derivative Systems Containing Nano-sized Particulates

The present work provides extensive insight into the newly developed sustainable bio-resin (terpene) functionalized Natural Rubber (NR). Structural elucidation of the functionalized NR was established by proton nuclear magnetic resonance ({sup 1}H NMR) and Fourier transform infrared spectroscopy (FTIR) respectively. This study demonstrates the effect of Bio-Resin Functionalized NR (BR-NR)/Epoxidized Natural rubber (ENR) blends combined with four different specific surface areas of highly dispersible silica (HDS). The primary aim of these analyses is the description of the interfacial area on the HDS surface involved in physical form (Micro pearl and Granule) and synergistic rubber-filler interaction mechanism for the superior reinforcement. Improved state of HDS dispersion has been achieved in absence of conventional toxic processing oil, silane coupling agent and normal zinc oxide. Remarkable improvement in overall properties corroborated with various meticulous characterization including cure characteristics, bound rubber content, Mullins effect and physico-mechanical properties etc. An augmented rubber-filler interaction is also supported by micro computed tomography morphology study. Dynamic mechanical analysis shows an ultra-low rolling resistance coupled with high traction and advanced elastic response of the greener macromolecules. More decisively, the macromolecule system toned up sparingly in the presence of the bio-resin. Newly developed BR-NR together with ENR 25 and their significant contribution to the improvements of properties are schematically explained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗