Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLYBUTADIENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nitroarene Photoactivation Promotes Oxidative Deconstruction of Olefinic Polymers

Photoactivation of nitroarenes has been recently reported to induce the transformation of alkenyl bonds into carbonyl functionalities. Capitalizing on this unique photochemical mechanism, this study explores the use of nitroarenes to achieve oxidative cleavage of olefinic polymers under visible light irradiation. The degradation of various olefinic polymers, including commercially available polybutadiene, polynorbornene, both linear and cyclic poly(phenylacetylene), as well as backbone-modified polyacrylates with alkenyl functionality was investigated. To elucidate the efficacy of this methodology, a series of nitroarene derivatives bearing variable substituents were screened for their degradative efficiency on polybutadiene. Varying nitroarene stoichiometry, reaction temperature, and pos-treaction workup conditions were investigated to optimize degradation conditions. Furthermore, the results demonstrated that photoexcited nitroarenes enable efficient oxidative degradation of olefinic polymers in a safe and sustainable manner, providing a novel strategy for mild macromolecular deconstruction.

Bond cleavage↗
DOE OSTI2024

Polyalkenamers as Drop-In Additives for Ring-Opening Metathesis Polymerization: A Promising Upcycling Paradigm

Here we report a distinct strategy to upcycle waste polyalkenamers such as polybutadiene into new, performance-advantaged materials by using them as drop-in additives for ring-opening metathesis polymerization (ROMP). The polyalkenamers serve as competent chain-transfer agents in ROMPs of common classes of cyclic olefin monomers, facilitating good molecular weight control, allowing low Ru catalyst loadings, and enabling efficient incorporation of the polyalkenamer into the synthesized polymeric material. We successfully demonstrate ROMP using model polyalkenamers and translate these learnings to leverage commercial polybutadiene and acrylonitrile butadiene styrene (ABS) as chain transfer agents for ROMP copolymerizations. Critically, our strategy is shown to be highly efficient and operationally simple, quantitatively incorporating the polyalkenamer and inheriting aspects of its thermomechanical performance. Our results highlight a promising pathway for the upcycling of polyalkenamers and provide an alternative to existing deconstruction and functional upcycling strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of melt viscosity on filler dispersion in elastomeric nanocomposites

Compounding of commercial nanocomposites usually involves the addition of viscosity enhancers such as binder resins in ink jet inks, and paints. Contrary to this, plasticizers such as process oils are added to reduce the melt viscosity and ease processability of reinforced elastomers. Nanofillers such as silica and carbon black are typically added to reinforce rubber and enhance performance of automotive tire treads. Filler dispersion has traditionally been qualitatively (indirectly) assessed by measuring the properties of reinforced elastomers. While dispersion can be quantified by examining filler agglomeration through surface roughness measurements and microscopy, the size-scale dependence for these hierarchical fillers has usually been ignored. Here, we have recently devised a method to quantify nano-scale dispersion of fillers using Ultra small-angle X-ray scattering (USAXS) techniques. This method is advantageous since it directly links the controllable processing/compounding parameters such as the mixing speed, mixer geometry, residence time (or mixing duration), melt density, flow gap distance, and melt viscosity to nano-scale dispersion. While our previous studies have explored the impact of different processing parameters, this study specifically investigates the impact of melt viscosity on nano-scale filler dispersion in elastomer compounds. Commercially available polybutadienes with different Mooney viscosities were used in conjunction with different grades and amounts of process oils to modify the melt viscosity.

Carbon black↗
DOE OSTI2025

Designing a Block Copolymer Membrane for Selective Transport of Lactic Acid from Aqueous Mixtures

We report the design and synthesis of a triblock copolymer-based membrane for enabling selective transport of lactic acid from aqueous solutions. This is relevant to the production of polylactic acid, one of the few biodegradable and biobased polymers with sufficient mechanical strength for practical applications. The end blocks are positively charged with negatively charged lactate counterions. The middle block is polybutadiene (PBD). Due to microphase separation, the charged blocks form channels for transporting lactic acid. The mechanical integrity of the membrane is controlled by cross-linking the PBD block. Transport of lactic acid and water across the membrane was studied by placing the membrane between two chambers, a feed chamber containing aqueous lactic acid solutions, and a receiving chamber containing pure water. The lactic acid concentration in the receiving chamber was monitored as a function of time using conductivity, HPLC, and NMR. The corresponding flux of water from the receiving chamber to the feed chamber was measured using an NMR-based approach. The lactic acid and water permeabilities through our membrane were (1.12 ± 0.05) × 10–8 and (8.58 ± 0.75) × 10–9 cm2 s–1. To our knowledge, there are no reports of lactic acid permeabilities through any membrane in the literature. The separation factor of our membrane, αLA/water, 1.305 ± 0.123, is comparable to that of membranes used for selective transport of ethanol, despite the fact that lactic acid is a much larger molecule than ethanol. Selective transport of lactic acid in our membrane is governed mainly by differences in solubility; lactic acid is 18 times more soluble in the membrane than water.

Jana, Rounak↗
DOE OSTI2025

Tuning Copolymer Microstructure Using Ring-Opening Cross-Metathesis Polymerization

The capability of ring-opening cross-metathesis (RO/CM) polymerization to produce alternating copolymers was studied. By treating commercial polybutadiene (PB) with bulky oxanorbornene monomers and Ru-based olefin metathesis catalysts, alternating copolymers were produced under mild conditions with high sequence fidelities. Here, we found that alternating copolymers could be produced starting from a variety of butadiene sources including PB, cyclooctadiene (COD), or t,t,t-1,5,9-cyclododecatriene (CDT), highlighting for the first time the kinetic pathway independence of this process. Kinetic copolymerization analysis of an oxanorbonene monomer with CDT revealed that much higher monomer conversions were obtained compared with the analogous homopolymerizations and showed evidence of alternating monomer incorporation. Copolymerization of these monomers also enabled good control when targeting different molecular weights. Copolymer thermal analysis revealed a strong correlation between thermal behavior and alternating sequence fidelity, providing a second lever beyond composition to tune thermal behavior. These data demonstrate that a broad variety of polymer microstructures can be accessed via RO/CM polymerization and highlight the potential of CDT in alternating copolymer synthesis.

Foster, Jeffrey C. [Oak Ridge National Laboratory ↗
DOE OSTI2025

How Topological Polymer Loops on the Nanoparticle Surface Control the Mechanical Properties of Nanocomposites

Carbon black (CB) and silica (SiO 2 ) filled elastomers are known to be the most successful polymer nanocomposites (PNCs) in industry, where “bound rubber (BR)” (i.e., polymer chains that are physically or chemically adsorbed on the nanofiller surface) plays a critical role in their reinforcement. Here, we report a molecular-scale mechanism underlying the “BR-induced reinforcement” by integrating neutron scattering experiments and molecular dynamics simulations. Simplified non-cross-linked SiO 2 -filled polybutadiene (PB) and CB-filled PB reveal the critical role of topological polymer loops in the BR for the enhanced mechanical performance. The average loop size on the SiO 2 surface modified with a silane coupling agent is much smaller than that on the CB surface and the loops on the SiO 2 surface are densely formed, preventing interdigitation with the matrix chains. On the other hand, the larger, uncrowded loops formed on the CB surface facilitate the interdigitation with the matrix polymer chains even near the filler surface. In this way, a strong connectivity is established between a matrix and a nanofiller, resulting in an adhesive filler–polymer interface. Furthermore, our findings shed light on rich and complex physics and materials design problems in PNCs, where the topological polymer structure on the nanofiller surface directly controls the macroscopic mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

One Step Block-like Copolymers from an Upcycled Monomer Using Ring-Opening Metathesis Polymerization

Block-like copolymers can be readily synthesized in one step using monomers with widely separated reactivity ratios. Here, we show that trans,trans,trans-1,5,9-cyclododecatriene (CDT), produced from polybutadiene via cyclodepolymerization (CDP), undergoes gradient copolymerization via ring-opening metathesis polymerization (ROMP) with a selected norbornene monomer to produce a block-like copolymer that exhibits bulk nanophase separation and excellent thermomechanical performance. These data highlight a new ROMP copolymerization system with a sharp compositional drift and introduce a simple pathway to convert waste plastic into a valuable building block for high-value thermoplastic materials.

block copolymer↗
DOE OSTI2025

Scalable, biologically sourced depolymerizable polydienes with intrinsically weakened carbon–carbon bonds

Currently, there are few examples of circularly recyclable polymers with all-carbon backbones, probably owing to the challenge of using selective C–C bond cleavage to efficiently produce monomers in recycling processes. Furthermore, here we demonstrate a series of biologically sourced polymuconate polymers synthesized via simple free-radical polymerization that exhibit intrinsically weakened C–C bonds and controlled chemical recycling to monomers. Modifying the side chains and copolymerization ratios allows a wide range of mechanical property tuning, achieving performances comparable to those of commercial plastics such as polystyrene, polymethyl methacrylate and polybutadiene. Techno-economic analysis and life cycle assessment for production at a scale of 100 kilotons per year show that the materials are currently slightly more expensive and environmentally intensive compared with conventional rubbers. However, use of recycled materials via depolymerization can greatly decrease the cost and environmental impacts of polymuconate production (for example, down to US$1.59 per kilogram) to outperform its commercial counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗