Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PO3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Design of a three-layer antireflection coating for high efficiency indium phosphide solar cells using a chemical oxide as first layer

It is well known that the behavior of III-V compound based solar cells is largely controlled by their surface, since the majority of light generated carriers (63% for GaAs and 79% for InP) are created within 0.2 mu m of the surface of the illuminated cell. Consequently, the always observed high surface recombination velocity (SRV) on these cells is a serious limiting factor for their high efficiency performance, especially for those with p-n junction made by either thermal diffusion or ion implantation. A good surface passivation layer, ideally a grown oxide as opposed to a deposited one, will cause a significant reduction in the SRV without adding interface problems, thus improving the performance of III-V compound based solar cells. Another significant benefit to the overall performance of the solar cells can be achieved by a substantial reduction of their large surface optical reflection by the use of a well designed antireflection (AR) coating. In this paper, we demonstrate the effectiveness of using a chemically grown thermally and chemically stable oxide, not only for surface passivation but also as an integral part of a 3-layer AR coating for thermally diffused p+n InP solar cells. A phosphorus-rich interfacial oxide, In(PO3)3, is grown at the surface of the p+ emitter using an etchant based on HNO3, o-H3PO4 and H2O2. This oxide has the unique properties of passivating the surface as well as serving as an efficient antireflective layer yielding a measured record high AMO open-circuit voltage of 890.3 mV on a thermally diffused InP(Cd,S) solar cell. Unlike conventional single layer AR coatings such as ZnS, Sb2O3, SiO or double layer AR coatings such as ZnS/MgF2 deposited by e-beam or resistive evaporation, this oxide preserves the stoichiometry of the InP surface. We show that it is possible to design a three-layer AR coating for a thermally diffused InP solar cell using the In(PO3)3 grown oxide as the first layer and Al2O3 and MgF2 as the second and third layers respectively, so as to yield an overall theoretical reflectance of less than 2%. Since chemical oxides are readily grown on III-V semiconductors materials, the technique of using the grown oxide layer to both passivate the surface as well as serve as the first of a multilayer AR coating should work well for all III-V compound-based solar cells.

Moulot, Jacques↗
NASA NTRS1995

Design of a Three-Layer Antireflection Coating for High Efficiency Indium Phosphide Solar Cells Using a Chemical Oxide as First Layer

It is well known that the behavior of III-V compound based solar cells is largely controlled by their surface, since the majority of light generated carriers (63% for GaAs and 79% for InP) are created within 0.2 microns of the illuminated surface of the cell. Consequently, the always observed high surface recombination velocity (SRV) on these cells is a serious limiting factor for their high efficiency performance, especially for those with the p-n junction made by either thermal diffusion or ion implantation. A good surface passivation layer, ideally, a grown oxide as opposed to a deposited one, will cause a significant reduction in the SRV without adding interface problems, thus improving the performance of III-V compound based solar cells. Another significant benefit to the overall performance of the solar cells can be achieved by a substantial reduction of their large surface optical reflection by the use of a well designed antireflection (AR) coating. In this paper, we demonstrate the effectiveness of using a chemically grown, thermally and chemically stable oxide, not only for surface passivation but also as an integral part of a 3- layer AR coating for thermally diffused p(+)n InP solar cells. A phosphorus-rich interfacial oxide, In(PO3)3, is grown at the surface of the p(+) emitter using an etchant based on HNO3, o-H3PO4 and H2O2. This oxide has the unique properties of passivating the surface as well as serving as a fairly efficient antireflective layer yielding a measured record high AM0, 25 C, open-circuit voltage of 890.3 mV on a thermally diffused InP(Cd,S) solar cell. Unlike conventional single layer AR coatings such as ZnS, Sb2O3, SiO or double layer AR coatings such as ZnS/MgF2 deposited by e-beam or resistive evaporation, this oxide preserves the stoichiometry of the InP surface. We show that it is possible to design a three-layer AR coating for a thermally diffused InP solar cell using the In(PO3)3 grown oxide as the first layer and Al2O3, MgF2 or ZnS, MgF2 as the second and third layers respectively, so as to yield an overall theoretical reflectance of less than 2%. Since chemical oxides are readily grown on III-V semiconductor materials, the technique of using the grown oxide layer to both passivate the surface as well as serve as the first of a multilayer AR coating, should work well for essentially all III-V compound-based solar cells.

Moulot, Jacques↗
NASA NTRS1972

Polyphosphate and trimetaphosphate formation under potentially prebiotic conditions.

When ammonium dihydrogen phosphate is heated with urea to temperatures in the range from 85 to 100 C, it polymerizes almost quantitatively to give polyphosphates containing, on the average, more than ten (PO3) residues. Similar experiments carried out at 72 C give polyphosphate in more than 60% yield. If a nucleoside (thymidine or 3 prime-deoxythymidine) is added to the reaction mixture, up to 23% of trimetaphosphate can be obtained at 100 C. The prebiotic significance of these reactions is discussed.

Osterberg, R.↗
NASA NTRS1986

Characterization of biogenic elements in interplanetary dust particles

Those particles that were designated cometary are aggregates of amorphous materials including carbon, iron-magnesium silicates, sulfides, metal and trace amounts of unusual phases. Most aggregates are carbon-rich with major and minor element abundances similar to a fine grained matrix of carbonaceous chondrites. Several particles were analyzed by a laser microprobe. The negative ionic species identified to date include carbon clusters, protonated carbon clusters, CN-, HCN-, CNO-, PO2-, PO3-, S-, S2- asnd OH-. These species are similar to those observed in cometary spectra and they support the assumption that organic materials are present. The occurance of phosphate ions suggests the presence of apatite or whitlockite. Cometary particle characteristics may indicate that the component grains represent primitive unaltered dust whose overall properties are extremely similar to altered primitive dust in carbonaceous chondrites.

Bunch, T. E.↗
NASA NTRS1991

Investigation of anodic and chemical oxides grown on p-type InP with applications to surface passivation for n(+)-p solar cell fabrication

Most of the previously reported InP anodic oxides were grown on a n-type InP with applications to fabrication of MISFET structures and were described as a mixture of In2O3 and P2O5 stoichiometric compounds or nonstoichiometric phases which have properties similar to crystalline compounds In(OH)3, InPO4, and In(PO3)3. Details of the compositional change of the anodic oxides grown under different anodization conditions were previously reported. The use of P-rich oxides grown either by anodic or chemical oxidation are investigated for surface passivation of p-type InP and as a protective cap during junction formation by closed-ampoule sulfur diffusion. The investigation is based on but not limited to correlations between PL intensity and X-ray photoelectron spectroscopy (XPS) chemical composition data.

Faur, Maria↗
NASA NTRS1991

Catalysis of hydrolysis and nucleophilic substitution at the P-N bond of phosphoimidazolide-activated nucleotides in phosphate buffers

Phosphoimidazolide-activated derivatives of guanosine and cytidine 5'-monophosphates, henceforth called ImpN's, exhibit enhanced rates of degradation in the presence of aqueous inorganic phosphate in the range 4.0 < or = pH < or = 8.6. This degradation is been attributed to (i) nucleophilic substitution of the imidazolide and (ii) catalysis of the P-N bond hydrolysis by phosphate. The first reaction results in the formation of nucleoside 5'-diphosphate and the second in nucleoside 5'-monophosphate. Analysis of the observed rates as well as the product ratios as a function of pH and phosphate concentration allow distinction between various mechanistic possibilities. The results show that both H2PO4- and HPO4(2-) participate in both hydrolysis and nucleophilic substitution. Statistically corrected biomolecular rate constants indicate that the dianion is 4 times more effective as a general base than the monoanion, and 8 times more effective as nucleophile. The low Bronsted value beta = 0.15 calculated for these phosphate species, presumed to act as general bases in facilitating water attack, is consistent with the fact that catalysis of the hydrolysis of the P-N bond in ImpN's has not been detected before. The beta nuc = 0.35 calculated for water, H2PO4-, HPO4(2-), and hydroxide acting as nucleophiles indicates a more associative transition state for nucleotidyl (O2POR- with R = nucleoside) transfers than that observed for phosphoryl (PO3(2-)) transfers (beta nuc = 0.25). With respect to the stability/reactivity of ImpN's under prebiotic conditions, our study shows that these materials would not suffer additional degradation due to inorganic phosphate, assuming the concentrations of phosphate, Pi, on prebiotic Earth were similar to those in the present oceans ([Pi] approximately 2.25 micromoles).

NASA Discipline Number 52-20↗
NASA NTRS2007

A Radical Pathway for Organic Phosphorylation during Schreibersite Corrosion with Implications for the Origin of Life

Phosphorylated compounds (e.g. DNA, RNA, phospholipids, and many coenzymes) are critical to biochemistry. Thus, their origin is of prime interest to origin of life studies. The corrosion of the meteoritic mineral schreibersite ((Fe,Ni)3P) may have significantly contributed to the origin of phosphorylated biomolecules. Corrosion of synthetic schreibersite in a variety of solutions was analyzed by nuclear magnetic resonance spectroscopy, mass spectrometry, and electron paramagnetic resonance spectroscopy. These methods suggest a radical reaction pathway for the corrosion of schreibersite to form phosphite radicals (raised dot PO3 sup 2-)) aqueous solution. These radicals can form activated polyphosphates and can phosphorylate organic compounds such as acetate (3% yield). Phosphonates (O3P-C) are found in the organic P inventory of the carbonaceous meteorite Murchison. While phosphonates are rare in biochemistry, the ubiquity of corroding iron meteorites on the early Earth could have provided an accessible source of organophosphorous for the origin of life allowing the invention of the organophosphates in modern biology as a product of early evolution.

Pasek, Matthew A.↗
NASA NTRS2017

Experimental Study into the Stability of Whitlockite in Basaltic Magmas

Apatite Ca5(PO4)3(F,Cl,OH), merrillite Ca18Na2Mg2(PO4)14, and whitlockite Ca9(Mg,Fe2+)(PO4)6[PO3(OH)] are the primary phosphate minerals found in most planetary materials including rocks from Earth, Moon, Mars, and asteroids [1-2]. For many years, the terms merrillite and whitlockite have been used interchangeably in the meteorite literature. Much of the confusion regarding the relationship between terrestrial and extraterrestrial "whitlockite" is based on the presence or absence of hydrogen in the mineral structure. Whitlockite has approximately 8500 ppm H2O, and the term "merrillite" has been adopted to identify the hydrogen-free form of whitlockite [2]. The atomic structures of merrillite and whitlockite were examined in detail by Hughes et al. [3-4]. On Earth, whitlockite has been found in rocks from evolved pegmatitic systems [2-4] and in some mantle rocks [e.g., 5]. Furthermore, terrestrial whitlockite has been shown to have some merrillite component [4]. For the meteoritic and lunar materials that have been investigated, merrillite appears to be far more common than whitlockite, and it has been proposed that the whitlockite component is unique to terrestrial samples [4]. There are some reports of "whitlockite" in the meteorite literature; however, these likely represent misidentifications of merrillite because there have been no reports of extraterrestrial whitlockite that have been verified through crystal structural studies or analyzed for their H contents. Hughes et al. [3] reported the atomic arrangement of lunar merrillite and demonstrated that the phase is similar to meteoritic merrillite and, predictably, devoid of hydrogen. In a follow-up study, Hughes et al. [4] reported the atomic arrangements of two natural samples of whitlockite, one synthetic whitlockite, and samples of synthetic whitlockite that were heated at 500degC and 1050degC for 24 h. The crystal chemistry and crystal structures of the phases were compared, and it was discovered that the latter treatment resulted in the dehydrogenation of whitlockite to form merrillite. The presence of merrillite vs. whitlockite was widely thought to serve as an indication that magmas were anhydrous [e.g., 6-7]. However, McCubbin et al., [8] determined that merrillite in the martian meteorite Shergotty had no discernible whitlockite component despite its coexistence with OH-rich apatite. Consequently, McCubbin et al., (2014) speculated that the absence of a whitlockite component in Shergotty merrillite and other planetary merrillites may be a consequence of the limited thermal stability of H in whitlockite (stable only at T less than1050degC), which would prohibit merrillite-whitlockite solid-solution at high temperatures. In the present study, we have aimed to test this hypothesis experimentally by examining the stability of whitlockite in basaltic magmas at 1.2 GPa and a temperature range of -1000- 1300degC.

McCubbin, F. M.↗
NASA NTRS2018

Experimental Study into the Stability of Whitlockite and Hydroxylapatite in Basaltic Magmas

Apatite (Ca5(PO4)3(F,Cl,OH)), merrillite (Ca18Na2Mg2(PO4)14), and whitlockite (Ca9(Mg,Fe(2+))(PO4)6[PO3(OH)]) are the primary phosphate minerals found in most planetary materials including rocks from Earth, Moon, Mars, and asteroids. For many years, the terms merrillite and whitlockite have been used interchangeably in the meteorite literature. Much of the confusion regarding the relationship between terrestrial and extraterrestrial 'whitlockite' is based on the presence or absence of hydrogen in the mineral structure. Whitlockite has approximately 8500 ppm H2O, and the term 'merrillite' has been adopted to identify the hydrogen-free form of whitlockite. The atomic structures of merrillite and whitlockite were examined in detail by Hughes et al.. On Earth, whitlockite has been found in rocks from evolved pegmatitic systems and in some mantle rocks. Furthermore, terrestrial whitlockite has been shown to have some merrillite component. For the meteoritic and lunar materials that have been investigated, merrillite appears to be far more common than whitlockite, and it has been proposed that the whitlockite component is unique to terrestrial samples. There are some reports of 'whitlockite' in the meteorite literature; however, these may represent misidentifications of merrillite because there have been no reports of extraterrestrial whitlockite that have been verified through crystal structural studies or analyzed for their H contents. Hughes et al. reported the atomic arrangement of lunar merrillite and demonstrated that the phase is similar to meteoritic merrillite and, predictably, devoid of hydrogen. In a follow-up study, Hughes et al. reported the atomic arrangements of two natural samples of whitlockite, one synthetic whitlockite, and samples of synthetic whitlockite that were heated at 500 C or 1050 C for 24 h. The crystal chemistry and crystal structures of the phases were compared, and it was discovered that the latter treatment resulted in the dehydrogenation of whitlockite to form merrillite.

McCubbin, F. M.↗