Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLZT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Development of PLZT dielectrics on base-metal foils for embedded capacitors.

We have deposited Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films on nickel and copper substrates to create film-on-foil capacitors that exhibit excellent dielectric properties and superior breakdown strength. Measurements with PLZT films on LaNiO3-buffered Ni foils yielded the following: relative permittivity of 1300 (at 25 C) and 1800 (at 150 C), leakage current density of 6.6 x 10{sup -9} A/cm{sup 2} (at 25 C) and 1.4 x 10{sup -8} A/cm{sup 2} (at 150 C), and mean breakdown field strength {approx}2.5 MV/cm. With PLZT deposited directly on Cu foils, we observed dielectric constant {approx}1100, dielectric loss (tan {delta}) {approx}0.06, and leakage current density of 7.3 x 10{sup -9} A/cm{sup 2} when measured at room temperature.

36 MATERIALS SCIENCE↗

Effects of pyrolysis conditions on dielectric properties of PLZT films derived from a polyvinylpyrrolidone-modified sol-gel process

Graphical abstract: SEM images showing the surface morphology of PLZT films derived from solutions with various PVP content and treated with either RTA (rapid thermal annealing) or SPT (step-wise preheat treatment) process. Highlights: Black-Right-Pointing-Pointer High-quality PLZT films were fabricated by using a polyvinylpyrrolidone-modified sol-gel method. Black-Right-Pointing-Pointer Improved film density and integrity was achieved by employing a novel step-wise preheat treatment (SPT) process. Black-Right-Pointing-Pointer Enhanced dielectric properties were correlated to the improved microstructures as a result of the SPT process. -- Abstract: Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films were deposited on platinized silicon substrates (Pt/Si) using a polyvinylpyrrolidone (PVP) modified sol-gel method. Pyrolysis of the green films was conducted via two methods: rapid thermal annealing (RTA) and a step-wise preheat treatment (SPT). Microstructure analysis and dielectric property characterization were performed on samples treated by these two methods. Results showed that the SPT-pyrolyzed films exhibited much better dielectric properties when compared with the RTA-pyrolyzed films. The differences in dielectric properties were correlated to microstructural features caused by the different pyrolysis conditions. High-quality PLZT films with high dielectric constant ( Almost-Equal-To 860 at zero bias) and high breakdown strength ( Almost-Equal-To 2.1 MV/cm) were fabricated under controlled pyrolysis conditions. This work demonstrated the potential application of this material for power electronics in electric drive vehicles.

36 MATERIALS SCIENCE↗

Phase transition and energy storage behavior of antiferroelectric PLZT thin films epitaxially deposited on SRO buffered STO single crystal substrates [Phase transition and energy storage behavior of antiferroelectric PLZT thin films epitaxially deposited on SRO buffered STO single crystal substrates]

Thin films of 300-nm-thick (Pb 0.98 , La 0.02 )(Zr 0.95 , Ti 0.05 )O 3 (PLZT) were epitaxially deposited on (100), (110), and (111) SrTiO3 single crystal substrates by pulsed laser deposition. X-ray diffraction line and reciprocal space mapping (RSM) scans were used to determine the crystal structure. Tetragonal ((001) PLZT) and monoclinic MA ((O 1 1 ) and (111) PLZT) structures were found, which influenced the stored energy density. Electric field induced antiferroelectric to ferroelectric (AFE—>FE) phase transitions were found to have a large reversible energy density of up to 30J/cm 3 . With increasing temperature, an AFE to relaxor ferroelectric (AFE—>RFE) transition was found. The RFE phase exhibited lower energy loss, and an improved energy storage efficiency. Here, the results are discussed from the perspective of crystal structure, dielectric phase transitions, and energy storage characteristics.

25 ENERGY STORAGE↗

Reitveld refinement study of PLZT ceramics

PLZT ceramics of composition Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3}, have been milled for 6hrs and 24hrs were prepared by solid state synthesis route. The 6hrs milled and 24hrs milled samples are represented as PLZT-6 and PLZT-24 ceramics respectively. X-ray diffraction (XRD) pattern was recorded at room temperature. The XRD pattern has been analyzed by employing Rietveld refinement method. Phase identification shows that all the peaks observed in PLZT-6 and PLZT-24 ceramics could be indexed to P4mm space group with tetragonal symmetry. The unit cell parameters of 6hrs milled PLZT ceramics are found to be a=b=4.0781(5)A and c=4.0938(7)A and for 24hrs milled PLZT ceramics unit cell parameters are a=b=4.0679(4)A and c=4.1010(5)A . The axial ratio c/a and unit cell volume of PLZT-6 are 1.0038 and 68.09(2)A{sup 3} respectively. In PLZT-24 samples, the axial ratio c/a value is 1.0080 which is little more than that of the 6hr milled PLZT sample whereas the unit cell volume decrease to 67.88 (1) A{sup 3}. An average crystallite size was estimated by using Scherrer's formula. Dielectric properties were obtained by measuring the capacitance and tand loss using Stanford LCR meter.

36 MATERIALS SCIENCE↗

PLZT Film Capacitors for Power Electronics and Energy Storage Applications

Ceramic film capacitors with high dielectric constant and high breakdown strength hold special promise for applications demanding high power density. By means of chemical solution deposition, we deposited ≈2-μm-thick films of lanthanum-doped lead zirconate titanate (PLZT) on LaNiO3-buffered Ni (LNO/Ni) foils and platinized silicon (PtSi) substrates. The dielectric properties and energy storage performance of the resulting samples were determined under a high level of applied electric field. X-ray diffraction stress analysis revealed that PLZT on LNO/Ni bears a compressive stress of ≈370 MPa while PLZT on PtSi endures a tensile stress of ≈250 MPa. Compressive stress was found to lead to heightened polarization, improved tunability, increased irreversible domain wall motion, and enhanced breakdown strength for PLZT deposited on the LNO/Ni as compared with the PtSi substrate. We observed a tunability of ≈55 and ≈40 % at room temperature under 100 kV/cm applied field, remanent polarization of ≈23.5 and ≈7.4 µC/cm^2, coercive electric field of ≈25.6 and ≈21.1 kV/cm, and dielectric breakdown strength of ≈2.6 and ≈1.5 MV/cm for PLZT deposited on LNO/Ni foils and PtSi substrates, respectively. A high recoverable energy density of ≈85 J/cm^3 and energy conversion efficiency of ≈65 % were measured on the PLZT film grown on LNO/Ni.

ceramic film capacitor↗

Coprecipitation-assisted hydrothermal synthesis of PLZT hollow nanospheres

Lanthanum-modified lead zirconate titanate Pb{sub 1-x}La{sub x}(Zr{sub 1-y}Ti{sub y})O{sub 3} (PLZT) hollow nanospheres have been successfully prepared via a template-free hydrothermal method using the well-mixed coprecipitated precursors and the KOH mineralizer. The structure, composition, and morphology of the PLZT hollow nanospheres were characterized by XRD (X-ray diffraction), ICP (inductive coupled plasma emission spectrometer), FTIR (Fourier transform infrared spectra), TG/DTA (thermogravimetric analysis and differential thermal analysis), TEM (transmission electron microscopy) and SEAD (selected area diffraction). The results show that the composition and the morphology control of the PLZT products are determined by the KOH concentration. The PLZT hollow nanospheres with uniform size of about 4 nm were synthesized in the presence of 5 M KOH. The crystalline nanoparticles can be prepared at dilute KOH, in contrast to the amorphous powders prepared at concentrated KOH. Formation mechanisms of the PLZT hollow nanospheres are also discussed.

36 MATERIALS SCIENCE↗

Strong electron emission from antiferroelectric PLZT(2/95/5) films

Strong emission current of 500 mA/cm{sup 2} was observed in sol-gel derived antiferroelectric (AFE) PLZT (2/95/5) thick films at a trigger voltage of 150 V and a dc extraction voltage of 50 V. The PLZT emitters were found to be fatigue-free up to 10{sup 6} emission cycles. Electron emission from our samples is believed to originate from the antiferroelectric-ferroelectric phase transition in the PLZT film emitters. Our results therefore indicate that PLZT could be a promising candidate for flat panel applications because of its higher saturated polarization and fatigue-free properties as compared to its ferroelectric counterparts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and characterization of ferroelectric PLZT film capacitors on metallic substrates.

We have grown ferroelectric Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films on Hastelloy C276 (HC) substrates by chemical solution deposition. Samples of 1.15-{micro}m-thick PLZT films were prepared on HC with and without lanthanum nickel oxide (LNO) films as an intermediate buffer layer. On samples with and without LNO buffers at room temperature, we measured dielectric constants of {approx}1,300 and {approx}450 and loss tangents of {approx}0.06 and {approx}0.07, respectively. For PLZT films grown on HC with LNO buffer, the dielectric constant increases, while the dielectric loss decreases, with increasing temperature. A dielectric constant of {approx}2,000 and loss of {approx}0.05 were observed at 150 C. Samples with LNO buffer also exhibited slimmer hysteresis loops and lower leakage current density when compared to samples without LNO buffer. The following results were measured on samples with and without LNO buffers: remanent polarization (P{sub r}) values of 21.3 and 36.4 {micro}C/cm{sup 2}, coercive electric field (E{sub c}) values of 41 and 173 kV/cm, and leakage current densities of {approx}1.1 x 10{sup -8} and {approx}1.6 x 10{sup -7} A/cm{sup 2}, respectively. The energy storage capability was measured at {approx}65 J/cm{sup 3} for the PLZT film-on-foil capacitor deposited on HC with LNO buffer.

36 MATERIALS SCIENCE↗

Fabrication and dielectric property of ferroelectric PLZT films grown on metal foils.

We have grown ferroelectric Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} (PLZT) films on platinized silicon and LaNiO{sub 3}-buffered nickel substrates by chemical solution deposition using a sol-gel process based on acetic acid chemistry. The following measurements were obtained under zero-bias field: relative permittivity of {approx}960 and dielectric loss of {approx}0.04 on the PLZT film grown on Pt/Si substrates, and relative permittivity of {approx}820 and dielectric loss of {approx}0.06 on the PLZT film grown on LNO-buffered Ni substrates. In addition, a relative permittivity of 125 and dielectric loss of 0.02 were measured at room temperature under a high bias field of 1 x 10{sup 6} V/cm on PLZT deposited on LNO-buffered nickel substrate. Furthermore, a steady-state leakage current density of {approx}8.1 x 10{sup -9} A/cm{sup 2} and mean breakdown field strength of 1.7 x 10{sup 6} V/cm were measured at room temperature. Finally, remanent polarization (P{sub r}) of {approx} 2.0 x 10{sup -5} C/cm{sup 2}, coercive electric field (E{sub c}) of {approx}3.4 x 10{sup 4} V/cm, and energy density of {approx}45 J/cm{sup 3} were determined from room-temperature hysteresis loop measurements on PLZT/LNO/Ni film-on-foil capacitors with 250-{micro}m-diameter platinum top electrodes.

36 MATERIALS SCIENCE↗

Nano-crystalline PLZT for dielectric applications.

Nano-materials have shown unique crystallite-dependent properties that present distinct advantages for dielectric applications. PLZT is an excellent dielectric material used in several applications and may benefit crystallite engineering; however complex systems such as PLZT require well-controlled synthesis techniques. An aqueous based synthesis route has been developed, using standard precursor chemicals and scalable techniques to produce large batch sizes. The synthesis will be briefly covered, followed by a more in-depth discussion of incorporating nanocrystalline PLZT into a working device. Initial electrical properties will be presented illustrating the potential benefits and associated difficulties of working with PLZT nano-materials.

36 MATERIALS SCIENCE↗

PLZT capacitor and method to increase the dielectric constant

A ceramic-capacitor includes a first electrically-conductive-layer, a second electrically-conductive-layer arranged proximate to the first electrically-conductive-layer, and a dielectric-layer interposed between the first electrically-conductive-layer and the second electrically-conductive-layer. The dielectric-layer is formed of a lead-lanthanum-zirconium-titanate material (PLZT), wherein the PLZT is characterized by a dielectric-constant greater than 125, when measured at 25 degrees Celsius and zero Volts bias, and an excitation frequency of ten-thousand Hertz (10 kHz). A method for increasing a dielectric constant of the lead-lanthanum-zirconium-titanate material (PLZT) includes the steps of depositing PLZT to form a dielectric-layer of a ceramic-capacitor, and heating the ceramic-capacitor to a temperature not greater than 300.degree. C.

36 MATERIALS SCIENCE↗

Effect of sintering on structural and dielectric properties of PLZT ferroelectrics

Here we report synthesis of (Pb{sub 0.93}La{sub 0.07}Zr{sub 0.6}Ti{sub 0.4}O{sub 3}) PLZT by chemical co-precipitation route. The precipitate obtained was subjected to different processing methods namely furnace sintering and hot press sintering. The product obtained was characterized using X-ray diffraction and dielectric measurements techniques. The dielectric properties obtained are correlated with the structural properties of PLZT.

36 MATERIALS SCIENCE↗

Effect of dead layer and strain on diffuse phase transition of PLZT relaxor thin films.

Bulk relaxor ferroelectrics exhibit excellent permittivity compared to their thin film counterpart, although both show diffuse phase transition (DPT) behavior unlike normal ferroelectrics. To better understand the effect of dead layer and strain on the observed anomaly in the dielectric properties, we have developed relaxor PLZT (lead lanthanum zirconate titanate) thin films with different thicknesses and measured their dielectric properties as a function of temperature and frequency. The effect of dead layer on thin film permittivity has been found to be independent of temperature and frequency, and is governed by the Schottky barrier between the platinum electrode and PLZT. The total strain (thermal and intrinsic) in the film majorly determines the broadening, dielectric peak and temperature shift in the relaxor ferroelectric. The Curie-Weiss type law for relaxors has been further modified to incorporate these two effects to accurately predict the DPT behavior of thin film and bulk relaxor ferroelectrics. The dielectric behavior of thin film is predicted by using the bulk dielectric data from literature in the proposed equation, which agree well with the measured dielectric behavior.

36 MATERIALS SCIENCE↗

PLZT capacitor on glass substrate

A lead-lanthanum-zirconium-titanate (PLZT) capacitor on a substrate formed of glass. The first metallization layer is deposited on a top side of the substrate to form a first electrode. The dielectric layer of PLZT is deposited over the first metallization layer. The second metallization layer deposited over the dielectric layer to form a second electrode. The glass substrate is advantageous as glass is compatible with an annealing process used to form the capacitor.

25 ENERGY STORAGE↗

PLZT capacitor on glass substrate

A lead-lanthanum-zirconium-titanate (PLZT) capacitor on a substrate formed of glass. The first metallization layer is deposited on a top side of the substrate to form a first electrode. The dielectric layer of PLZT is deposited over the first metallization layer. The second metallization layer deposited over the dielectric layer to form a second electrode. The glass substrate is advantageous as glass is compatible with an annealing process used to form the capacitor.

25 ENERGY STORAGE↗

Thermophysical properties of PLZT ferroelectric ceramics with a nanopolar structure

The heat capacity, thermal expansion coefficient, and deformation of the PLZT-9/65/35 compound are studied in the temperature range 150-800 K. Diffuse anomalies are detected in the temperature dependences of the heat capacity and thermal expansion coefficient over wide temperature ranges of 250-650 and 330-550 K, respectively. The anomalous behavior of the heat capacity in the temperature range 250-650 K is shown to be caused by the appearance of two-level states (Schottky anomaly). The results obtained are discussed along with the data of structural and dielectric studies.

36 MATERIALS SCIENCE↗

Study of x CNFO + (1-x) PLZT magnetoelectric composites

In the present paper, we are reporting the studies on structural, dielectric, ferroelectric and magnetic properties of Lanthanum (La) substituted Lead Zirconate Titanate (PZT) and Cobalt Nickel ferrite (CNFO) composites with compositional formula x(Co{sub 0.80}Ni{sub 0.20}Fe{sub 2}O{sub 4})+(1−x)(Pb{sub 1.01625}La{sub 0.0025}Zr{sub 0.55}Ti{sub 0.45}O{sub 3}) (x = 0.00,0.10). The materials were synthesized by solid state reaction route. XRD analysis confirms the presence of both ferrite and ferroelectric phases. Dielectric properties were studied as a function of frequency and temperature. Ferroelectric P-E and Magnetic M-H hysteresis loops were measured at room temperature.

36 MATERIALS SCIENCE↗