Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA CONFINEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Simulating the magnetized liner inertial fusion plasma confinement with smaller-scale experiments [Simulating the MagLIF plasma confinement with smaller-scale experiments]

The recently proposed magnetized liner inertial fusion approach to a Z-pinch driven fusion [Slutz et al., Phys. Plasmas17, 056303 (2010)] is based on the use of an axial magnetic field to provide plasma thermal insulation from the walls of the imploding liner. The characteristic plasma transport regimes in the proposed approach cover parameter domains that have not been studied yet in either magnetic confinement or inertial confinement experiments. In this article, an analysis is presented of the scalability of the key physical processes that determine the plasma confinement. The dimensionless scaling parameters are identified and conclusion is drawn that the plasma behavior in scaled-down experiments can correctly represent the full-scale plasma, provided these parameters are approximately the same in two systems. Furthermore, this observation is important in that smaller-scale experiments typically have better diagnostic access and more experiments per year are possible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Local regulation of interchange turbulence in a dipole-confined plasma torus using current-collection feedback

Turbulence in plasma confined by a magnetic dipole is dominated by interchange fluctuations with complex dynamics and short spatial coherence. We report the first use of local current-collection feedback to modify, amplify, and suppress these fluctuations. The spatial extent of turbulence regulation is limited to a correlation length near the collector. Changing the gain and phase of collection results in power either extracted from or injected into the turbulence. The measured plasma response shows some agreement with calculations of the linear response of global interchange-like MHD and entropy modes to current-collection feedback.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

The role of ambient gas confinement, plasma chemistry, and focusing conditions on emission features of femtosecond laser-produced plasmas

Ultrafast laser ablation coupled with optical emission spectroscopy is currently under development for standoff detection of elements and their isotopes for a wide range of application areas. In this work, we explore the role of ambient air pressure during the interaction of an ultrafast laser beam with two metallic targets (brass and uranium) with significantly different oxygen gas-phase reactivity. Plasma plumes were generated by focusing ~800 nm, ~35 fs pulses from an ultrafast laser system using a long focal length lens with f = 1 m. Two-dimensional spectral imaging was performed over the pressure range of 30 mTorr-700 Torr air to evaluate emission dynamics, plasma chemistry, signal-to-background ratio, and characteristic parameters (i.e. excitation temperature, electron density). An increase in ambient air pressure during ultrafast laser ablation leads to plume confinement and subsequent changes in the emission dynamics due to plasma chemistry as well as changes in plasma generation conditions (i.e. focused fs laser ablation versus filament ablation). Ablation crater morphologies were also investigated via scanning electron microscopy. Results indicate atomic emission intensity and signal-to-background ratios peak at moderate pressure levels (~50-100 Torr air) for both targets studied, although plasma chemistry influences uranium emission signatures. The emission features of the uranium plasma at pressures = 10 Torr showed the presence of atoms and oxide molecules which are co-located within the plume. We also find filament ablation leads to wider, more shallow craters compared to focused laser ablation. Our study provides unique insight into the interplay between plume dynamics, confinement, and oxygen chemistry of fs laser-produced plasmas and how these phenomena evolve with changing ambient air pressure.

Laser-produced plasma↗
DOE OSTI2011

The role of surface currents in plasma confinement

During plasma instabilities, ''surface currents'' can flow at the interface between the plasma and the surrounding vacuum, and in most cases, they are a harmless symptom of the instability that is causing them. Large instabilities can lead to ''disruptions,'' an abrupt termination of the plasma with the potential to damage the machine in which it is contained. For disruptions, the correct calculation of surface currents is thought to be essential for modelling disruptions properly. Recently, however, there has been debate and disagreement about the correct way to calculate surface currents. The purpose of this paper is to clarify as simply as possible the role of surface currents for plasma confinement and to show that a commonly used representation for surface currents {sigma}-vector with {sigma}-vector={nabla}I and n-vector, I a scalar function, and n-vector the unit normal to the plasma surface, is only appropriate for the calculation of surface currents that are in magnetohydrodynamic equilibrium. Fortunately, this is the situation thought to be of most relevance for disruption calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2012

Space-charge-based electrostatic plasma confinement involving relaxed plasma species

A numerical study is reported on the equilibrium properties of a surface-emitted or edge-confined non-drifting plasma. A self-consistent finite-differences evaluation of the electrostatic potential is carried out for a non-neutral plasma that follows a Boltzmann density distribution. The non-neutral plasma generates an electrostatic potential that has an extremum at the geometric center. Poisson's equation is solved for different ratios of the non-neutral plasma size to the edge Debye length. The profiles of the electrostatic potential and the plasma density are presented for different values of that ratio. A second plasma species is then introduced for two-plasma-species confinement studies, with one species confined by the space charge of the other, while each species follows a Boltzmann density distribution. An equilibrium in which a neutral region forms is found. An equilibrium is also found in which the two species have equal temperatures and charge states.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Parallel Reconstruction of Three Dimensional Magnetohydrodynamic Equilibria in Plasma Confinement Devices

Fast, accurate three dimensional reconstructions of plasma equilibria, crucial for physics interpretation of fusion data generated within confinement devices like stellarators/ tokamaks, are computationally very expensive and routinely require days, even weeks, to complete using serial approaches. Here, we present a parallel implementation of the three dimensional plasma reconstruction code, V3FIT. A formal analysis to identify the performance bottlenecks and scalability limits of this new parallel implementation, which combines both task and data parallelism, is presented. The theoretical findings are supported by empirical performance results on several thousands of processor cores of a Cray XC30 supercomputer. Parallel V3FIT is shown to deliver over 40X speedup, enabling fusion scientists to carry out three dimensional plasma equilibrium reconstructions at unprecedented scales in only a few hours (instead of in days/weeks) for the first time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Lithium splashing from flowing liquid lithium limiter and its effect on high confinement plasma performance in EAST tokamak

To study the potential applications of liquid lithium (Li) as plasma facing material, the third generation of flowing liquid Li (FLiLi) limiter has been designed and successfully tested in EAST tokamak H-mode discharges in the 2018 run campaign. Here, the stability of liquid Li on FLiLi surface, and Li splashing and its effect on the plasma performance are investigated in detail. Li splashing was observed in L-mode and H-mode discharges due to Rayleigh-Taylor (R-T) instability, resulting from electromagnetic forces J → x B → . Li splashing in low-parameter plasma decreased both core and edge electron temperatures, resulting in the degradation of plasma energy confinement and even H-L back transition, however, it almost did not influence plasma confinement performance in high-parameter plasma. These findings indicate that high-parameter plasma has higher tolerance to Li impurities than low-parameter plasma. By contrast, tungsten splashing from the melted layer on the upper divertor was also induced by the R-T instability but generally resulted in plasma disruption, which suggests lower tolerance to tungsten impurities in EAST tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Observation of weakly damped modes using high resolution measurement of turbulence in a dipole confined plasma

When plasma is confined by a levitated superconducting current ring, the turbulent radial particle flux changes the direction depending upon the gradient of the particle number within tubes of equal magnetic flux [Garnier et al., Phys. Plasmas 24, 012506 (2017)]. When the density profile is highly peaked, the particle flux is outward. When the density profile is less peaked, turbulence drives an inward “particle pinch.” This change in the direction of particle flux coincides with a reversal of the mean toroidal propagation direction of turbulent fluctuations. Previously, only the mean wavenumber of the fluctuations was reported. The mean wavenumber was computed from the ensemble correlation between two probes. Here, the full frequency-wavenumber power spectrum of the saturated turbulence is calculated by applying Capon’s “maximum likelihood method” to floating potential measurements from an array of probes. The power spectrum shows that the highest intensity modes are due to unstable entropy modes, and the less intense modes coincide with weakly damped convective cells, which rotate toroidally in the direction opposite to the unstable modes. Because the weakly damped modes make up a significant fraction of the fluctuating power, these measurements imply that saturated turbulence in a dipole-confined plasma involves the excitation of weakly damped rotating convective cells.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Perpendicular magnetofluid theory for magnetically confined plasmas in the collisionless limit

Note that the magnetically confined plasmas in thermonuclear fusion turn to be collisionless. Some particles are trapped by the inhomogeneous equilibrium field or by the waves, while some others keep circulating. One cannot expect the charged particles to be collectively localized in space by collisions along the magnetic field lines. Consequently, the fluid parameters relating to the parallel motion, such as parallel fluid velocity, become inadequate. In this paper, the perpendic- ular magnetofluid theory for magnetically confined plasmas in the collisionless limit is developed. It revises Braginskii’s transport theory by releasing the collisional dominance assumption. In the perpendicular direction, the particle spatial localization is solo resulted from the strong magnetic field, while the finite Larmor radius (FLR) effects are taken into account in the next order. In the parallel direction, the particle mobility feature is fully retained by constructing only the per- pendicular moments. Therefore, besides the FLR effects till order O($k$ $^{2}_{⊥}$ $ρ$ $^{2}_{i}$ ), the Landau damping, the trapped particle effects, and other parallel kinetic effects are all kept in the current formalism. Here, k ⊥ is the perpendicular wave number and ρ i is the ion Larmor radius. Here, the theory can be used both for the analytical and numerical studies of magnetically confined plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Plasma confinement system with outer electrode having liquifiable material and methods for use

An example plasma confinement system includes an inner electrode having a rounded first end that is disposed on a longitudinal axis of the plasma confinement system and an outer electrode that at least partially surrounds the inner electrode. The outer electrode includes a solid conductive shell and an electrically conductive material disposed on the solid conductive shell and on the longitudinal axis of the plasma confinement system. The electrically conductive material has a melting point within a range of 170° C. to 800° C. at 1 atmosphere of pressure. Related plasma confinement systems and methods are also disclosed herein.

Shumlak, Uri↗
DOE OSTI2015

Wave excitation by nonlinear coupling among shear Alfvén waves in a mirror-confined plasma

A shear Alfvén wave at slightly below the ion-cyclotron frequency overcomes the ion-cyclotron damping and grows because of the strong anisotropy of the ion temperature in the magnetic mirror configuration, and is called the Alfvén ion-cyclotron (AIC) wave. Density fluctuations caused by the AIC waves and the ion-cyclotron range of frequencies (ICRF) waves used for ion heating have been detected using a reflectometer in a wide radial region of the GAMMA 10 tandem mirror plasma. Various wave-wave couplings are clearly observed in the density fluctuations in the interior of the plasma, but these couplings are not so clear in the magnetic fluctuations at the plasma edge when measured using a pick-up coil. A radial dependence of the nonlinearity is found, particularly in waves with the difference frequencies of the AIC waves; bispectral analysis shows that such wave-wave coupling is significant near the core, but is not so evident at the periphery. In contrast, nonlinear coupling with the low-frequency background turbulence is quite distinct at the periphery. Nonlinear coupling associated with the AIC waves may play a significant role in the beta- and anisotropy-limits of a mirror-confined plasma through decay of the ICRF heating power and degradation of the plasma confinement by nonlinearly generated waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Identification of S VIII through S XIV emission lines between 17.5 and 50 nm in a magnetically confined plasma

43 spectral emission lines from F-like to Li-like sulphur ions have been identified in the wavelength range from 17.5 to 50 nm in spectra obtained following tracer injection into plasmas created in a magnetically confined plasma device, the stellarator TJ-II. Plasmas created and maintained in this heliac device with electron cyclotron resonance heating achieve central electron temperatures and densities up to 1.5 keV and 8 × 10 18 m –3 , respectively. Tracer injections were performed with ≤6 × 10 16 atoms of sulphur contained within ~300 μm diameter polystyrene capsules, termed tracer encapsulated solid pellets, using a gas propulsion system to achieve velocities between 250 and 450 m s –1 . Once ablation of the exterior polystyrene shell by plasma particles is completed, the sulphur is deposited in the plasma core where it is ionized up to S +13 and transported about the plasma. In order to aid line identification, which is made using a number of atomic line emission databases, spectra are collected before and after injection using a 1 m focal length normal incidence spectrometer equipped with a CCD camera. Furthermore, this work is motivated by the need to clearly identify sulphur emission lines in the vacuum ultraviolet range of magnetically confined plasmas, as sulphur x-ray emission lines are regularly observed in both tokamak and stellarator plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Plasma confinement system and methods for use

A plasma confinement system is provided that includes a confinement chamber that includes one or more enclosures of respective helicity injectors. The one or more enclosures are coupled to ports at an outer radius of the confinement chamber. The system further includes one or more conductive coils aligned substantially parallel to the one or more enclosures and a further set of one or more conductive coils respectively surrounding portions of the one or more enclosures. Currents may be provided to the sets of conductive coils to energize a gas within the confinement chamber into a plasma. Further, a heat-exchange system is provided that includes an inner wall, an intermediate wall, an outer wall, and pipe sections configured to carry coolant through cavities formed by the walls.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2014

Recent advances in long-pulse high-confinement plasma operations in Experimental Advanced Superconducting Tokamak

A long-pulse high confinement plasma regime known as H-mode is achieved in the Experimental Advanced Superconducting Tokamak (EAST) with a record duration over 30 s, sustained by Lower Hybrid wave Current Drive (LHCD) with advanced lithium wall conditioning and divertor pumping. This long-pulse H-mode plasma regime is characterized by the co-existence of a small Magneto-Hydrodynamic (MHD) instability, i.e., Edge Localized Modes (ELMs) and a continuous quasi-coherent MHD mode at the edge. We find that LHCD provides an intrinsic boundary control for ELMs, leading to a dramatic reduction in the transient power load on the vessel wall, compared to the standard Type I ELMs. LHCD also induces edge plasma ergodization, broadening heat deposition footprints, and the heat transport caused by ergodization can be actively controlled by regulating edge plasma conditions, thus providing a new means for stationary heat flux control. In addition, advanced tokamak scenarios have been newly developed for high-performance long-pulse plasma operations in the next EAST experimental campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Electrode configuration for extended plasma confinement

Methods and systems are provided for plasma confinement utilizing various electrode and valve configurations. In one example, a device includes a first electrode positioned to define an outer boundary of an acceleration volume, a second electrode arranged coaxially with respect to the first electrode and positioned to define an inner boundary of the acceleration volume, at least one power supply to drive an electric current along a Z-pinch plasma column between the first second electrodes, and a set of valves to provide gas to the acceleration volume to fuel the Z-pinch plasma column, wherein an electron flow of the electric current is in a first direction from the second electrode to the first electrode. In additional or alternative examples, a shaping part is conductively connected to the second electrode to, in a presence of the gas, cause a gas breakdown of the gas to generate a sheared flow velocity profile.

Meier, Eric T.↗