SEARCH · Engineering Papers

Results for “PIVOT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Dynamic behavior of air lubricated pivoted-pad journal-bearing, rotor system. 2: Pivot consideration and pad mass

Rotor bearing dynamic tests were conducted with tilting-pad journal bearings having three different pad masses and two different pivot geometries. The rotor was vertically mounted and supported by two three-pad tilting-pad gas journal bearings and a simple externally pressurized thrust bearing. The bearing pads were 5.1 cm (2.02 in.) in diameter and 2.8 cm (1.5 in.) long. The length to diameter ratio was 0.75. One pad was mounted on a flexible diaphragm. The bearing supply pressure ranged from 0 to 690 kilonewtons per square meter (0 to 100 psig), and speeds ranged to 38,500 rpm. Heavy mass pad tilting-pad assemblies produced three rotor-bearing resonances above the first two rotor critical speeds. Lower supply pressure eliminated the resonances. The resonances were oriented primarily in the direction normal to the diaphragm.

Nemeth, Z. N.↗

NASA NTRS2001

PiVoT GPS Receiver

NASA Goddard Space Flight Center has built an open architecture, 24 channel space flight GPS receiver. The CompactPCI PiVoT GPS receiver card is based on the Mitel/GEC Plessey Builder-2 board. PiVoT uses two Plessey 2021 correlators to allow tracking of up to 24 separate GPS SV's on unique channels. Its four front ends can support four independent antennas, making it a useful card for hosting GPS attitude determination algorithms. It has been built using space quality, radiation tolerant parts. The PiVoT card will track a weaker signal than the original Builder 2 board. It also hosts an improved clock oscillator. The PiVoT software is based on the original Plessey Builder 2 software ported to the Linux operating system. The software is POSIX complaint and can easily be converted to other POSIX operating systems. The software is open source to anyone with a licensing agreement with Plessey. Additional tasks can be added to the software to support GPS science experiments or attitude determination algorithms. The next generation PiVoT receiver will be a single radiation hardened CompactPCI card containing the microprocessor and the GPS receiver optimized for use above the GPS constellation. PiVoT was flown successfully on a balloon in July, 2001, for its first non-simulated flight.

Wennersten, Miriam Dvorak↗

NASA NTRS1989

Parallel pivoting combined with parallel reduction and fill-in control

Parallel algorithms for triangularization of large, sparse, and unsymmetric matrices are presented. The method combines the parallel reduction with a new parallel pivoting technique, control over generation of fill-ins and check for numerical stability, all done in parallel with the work being distributed over the active processes. The parallel pivoting technique uses the compatibility relation between pivots to identify parallel pivot candidates and uses the Markowitz number of pivots to minimize fill-in. This technique is not a preordering of the sparse matrix and is applied dynamically as the decomposition proceeds.

Alaghband, Gita↗

NASA NTRS2001

PiVoT GPS Receiver

NASA Goddard Space Flight Center has built an open architecture, 24 channel spaceflight Global Positioning System (GPS) receiver. The compact PCI PiVoT GPS receiver card is based on the Mitel/GEC Plessey Builder 2 board. PiVoT uses two Plessey 2021 correlators to allow tracking of up to 24 separate GPS SV's on unique channels. Its four front ends can support four independent antennas, making it a useful card for hosting GPS attitude determination algorithms. It has been built using space quality, radiation tolerant parts. The PiVoT card works at a lower signal to noise ratio than the original Builder 2 board. It also hosts an improved clock oscillator. The PiVoT software is based on the original Piessey Builder 2 software ported to the Linux operating system. The software is posix compliant and can be easily converted to other posix operating systems. The software is open source to anyone with a licensing agreement with Plessey. Additional tasks can be added to the software to support GPS science experiments or attitude determination algorithms. The next generation PiVoT receiver will be a single radiation hardened compact PCI card containing the microprocessor and the GPS receiver optimized for use above the GPS constellation.

Wennersten, Miriam↗

NASA NTRS1987

Parallel pivoting combined with parallel reduction

Parallel algorithms for triangularization of large, sparse, and unsymmetric matrices are presented. The method combines the parallel reduction with a new parallel pivoting technique, control over generations of fill-ins and a check for numerical stability, all done in parallel with the work being distributed over the active processes. The parallel technique uses the compatibility relation between pivots to identify parallel pivot candidates and uses the Markowitz number of pivots to minimize fill-in. This technique is not a preordering of the sparse matrix and is applied dynamically as the decomposition proceeds.

Alaghband, Gita↗

NASA NTRS1980

Identifying and locating land irrigated by center-pivot irrigation systems using satellite imagery

A methodology for using Landsat imagery for the identification and location of land irrigated by center-pivot irrigation systems is presented. The procedure involves the use of sets of Landsat band 5 imagery taken separated in time by about three weeks during the irrigation season, a zoom transfer scope and mylar base maps to record the locations of center pivots. Further computer processing of the data has been used to obtain plots of center-pivot irrigation systems and tables indicating the distribution and growth of systems by county for the state of Nebraska, and has been found to be in 95% agreement with current high-altitude IR photography. The information obtainable can be used for models of ground-water aquifers or resource planning.

Hoffman, R. O.↗

NASA NTRS2006

Estimating Temperature Retrieval Accuracy Associated With Thermal Band Spatial Resolution Requirements for Center Pivot Irrigation Monitoring and Management

This study explores the use of synthetic thermal center pivot irrigation scenes to estimate temperature retrieval accuracy for thermal remote sensed data, such as data acquired from current and proposed Landsat-like thermal systems. Center pivot irrigation is a common practice in the western United States and in other parts of the world where water resources are scarce. Wide-area ET (evapotranspiration) estimates and reliable water management decisions depend on accurate temperature information retrieval from remotely sensed data. Spatial resolution, sensor noise, and the temperature step between a field and its surrounding area impose limits on the ability to retrieve temperature information. Spatial resolution is an interrelationship between GSD (ground sample distance) and a measure of image sharpness, such as edge response or edge slope. Edge response and edge slope are intuitive, and direct measures of spatial resolution are easier to visualize and estimate than the more common Modulation Transfer Function or Point Spread Function. For these reasons, recent data specifications, such as those for the LDCM (Landsat Data Continuity Mission), have used GSD and edge response to specify spatial resolution. For this study, we have defined a 400-800 m diameter center pivot irrigation area with a large 25 K temperature step associated with a 300 K well-watered field surrounded by an infinite 325 K dry area. In this context, we defined the benchmark problem as an easily modeled, highly common stressing case. By parametrically varying GSD (30-240 m) and edge slope, we determined the number of pixels and field area fraction that meet a given temperature accuracy estimate for 400-m, 600-m, and 800-m diameter field sizes. Results of this project will help assess the utility of proposed specifications for the LDCM and other future thermal remote sensing missions and for water resource management.

Ryan, Robert E.↗

NASA NTRS1972

Effects of wing-pivot location and forewing configuration on the low-speed aerodynamic characteristics of a variable-sweep airplane model

An investigation has been made to determine the effects of the location of the wing pivot and geometry of the forewing on the static longitudinal aerodynamic characteristics at subsonic speeds of a model representing a variable-sweep supersonic fighter airplane. Results indicate that as the wing-pivot location moves aft and outboard, the change in static margin due to wing sweep is reduced. Increasing the forewing area resulted in a forward shift of the aerodynamic center as well as a slight reduction in the aerodynamic-center variation due to wing sweep.

Huffman, J. K.↗

NASA NTRS1982

Unidirectional Flexural Pivot

Flexural pivot deflects in only one angular direction (either clockwise or counterclockwise) and has a longer operating life than many previous designs. Pivot consists of two rings interconnected by three flat metal parallelograms welded into grooves or slots in inside diameters of rings. Springs flex to relieve compressive stress imparted by angular rotation.

Bahiman, H.↗

NASA NTRS1982

Pivot Attachment for Prefabricated Beams

Assembly of prefabricated structural beams for roof trusses, bleachers, or other lightweight structures made easier by use of flexural pivot at one or both ends. When pivot is attached, joint is flexible, thus simplifying alinement; joint is subsequently rigidized by threaded collar that completes attachment.

Stroll, H. W. J.↗

NASA NTRS1983

Pivoting and slip in an angular contact bearing

Pivoting slips are calculated for the ball-race and ball-ball contacts in a retainerless bearing. The calculation is kinematic, ignoring all inertial loadings. Pure spin and uniform precession of the balls are considered. Pivoting slip magnitudes are compared with several other kinds of slip which were previously reported in an R4 size bearing.

Kingsbury, E.↗

NASA NTRS1984

Pivoting and slip in an angular contact bearing

Kingsbury, E.↗

NASA NTRS1985

Pivotable strakes for high angle of attack control

A series of pivotable strakes have been tested in combination with a 44-deg swept wing to determine their ability to provide pitch control at high angles of attack. The tests were carried out in the Langley 7 X 10-Foot High-Speed tunnel at nominal Mach numbers of 0.3 to 0.4. A total of five strakes with various aspects ratios and shapes were tested at negative deflection angles of 5, 10, 15, and 20 deg through an angle of attack range up to approximately 50 deg. In addition, a cranked delta wing with 70-deg sweep was tested with two different pivotable apex flaps. This paper shows lift, drag and moment data for the complete configurations as well as for the separate contributions of the strakes and fuselage nose which are mounted on a second balance. Generally, strake deflection was found to have a significant effect on moment while lift/drag changed very little.

Bobbitt, P. J.↗

NASA NTRS1986

Remote pivot decoupler pylon: Wing/store flutter suppressor

A device for suspending a store from an aerodynamic support surface, such an an aircraft wing, and more specifically, for improving upon singlet pivot decoupler pylons by reducing both frequency of active store, alignment, and alignment system space and power requirements. Two links suspend a lower pylon/rack section and releasable attached store from an upper pylon section mounted under the wing. The links allow the lower pylon section to rotate in pitch about a remote pivot point. A leaf spring connected between the lower section and electrical alignment system servomechanism provides pitch alignment of the lower section/store combination. The servomechanism utilizes an electric servomotor to drive the gear train and reversibly move the leaf spring, thereby maintaining the pitch attitude of the store within acceptable limits. The damper strokes when the lower section rotates to damp large oscillations of store.

Hassler, J. M., Jr.↗

NASA NTRS1987

Development of confidence limits by pivotal functions for estimating software reliability

The utility of pivotal functions is established for assessing software reliability. Based on the Moranda geometric de-eutrophication model of reliability growth, confidence limits for attained reliability and prediction limits for the time to the next failure are derived using a pivotal function approach. Asymptotic approximations to the confidence and prediction limits are considered and are shown to be inadequate in cases where only a few bugs are found in the software. Departures from the assumed exponentially distributed interfailure times in the model are also investigated. The effect of these departures is discussed relative to restricting the use of the Moranda model.

Dotson, Kelly J.↗

NASA NTRS1990

Pivotal-Function Assessment Of Reliability Of Software

Approach developed to establish utility of pivotal functions for estimation and prediction of reliability of software. Improved estimates of reliability with statistical confidence obtained when relatively few testing data available. Pivotal functions effective tools for determination of confidence limits for reliability of software and prediction limits for time to next failure. Provides exact confidence and prediction limits regardless of how many bugs found in software.

Hayhurst, Kelly J.↗

NASA NTRS1991

A new active virtual pivot six-degree-of-freedom hand controller for aerospace applications

During 1989 a new six-degree-of-freedom (6-DOF) active hand controller concept was designed and constructed based on the concept of a virtual pivot. This concept, labeled VPHC, was first demonstrated in a 1985 study and a patent was issued in 1990. Operator control input occurs via a force/torque sensor rigidly mounted to the handgrip. Sensed force/torque signals are used by microprocessors to generate motor drive control for each of six independently controlled motors mounted on the three-legged mechanism. The control microprocessor uses input biasing and rate-feedback motor controllers to generate the sensed feel of virtual springs and deadbands found in more conventional designs. An important advantage of this design is that the location of the virtual pivots, reflective forces and torques, breakout force levels, sensed spring rates, and operating modes, can be changed simply by changing the software. This approach yields an autonomous VPHC that can easily adapt itself to an individual operator (by software extension). A proof-of-concept version has been demonstrated, and further improvements are currently being studied and implemented.

Marshall, William C.↗

NASA NTRS1993

Pivoting-Head Wrench

Wrench ends pivot so it can be used to loosen or tighten nuts or bolts in confined spaces. One end equipped with open-end socket; other end, with double-hexagon socket. Heads pivot on pins. Pins fit tightly so heads do not flop; friction on pins sufficient to hold heads in positions until rotated intentionally.

Bradley, Glen L.↗