Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHYSICAL PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Physical Properties of Gas Hydrates: A Review

Methane gas hydrates in sediments have been studied by several investigators as a possible future energy resource. Recent hydrate reserves have been estimated at approximately 10 16 m 3 of methane gas worldwide at standard temperature and pressure conditions. In situ dissociation of natural gas hydrate is necessary in order to commercially exploit the resource from the natural-gas-hydrate-bearing sediment. The presence of gas hydrates in sediments dramatically alters some of the normal physical properties of the sediment. These changes can be detected by field measurements and by down-hole logs. An understanding of the physical properties of hydrate-bearing sediments is necessary for interpretation of geophysical data collected in field settings, borehole, and slope stability analyses; reservoir simulation; and production models. This work reviews information available in literature related to the physical properties of sediments containing gas hydrates. A brief review of the physical properties of bulk gas hydrates is included. Detection methods, morphology, and relevant physical properties of gas-hydrate-bearing sediments are also discussed.

Gabitto, Jorge F.↗

Influence of combustion conditions and coal properties on physical properties of fly ash generated from pulverized coal combustion

To develop combustion technology for upgrading the quality of fly ash, the influences of the coal properties, such as the size of pulverized coal particles and the two-stage combustion ratio during the combustion, on the fly ash properties were investigated using our test furnace. The particle size, density, specific surface area (obtained by the Blaine method), and shape of fly ash particles of seven types of coal were measured. It was confirmed that the size of pulverized coal particles affects the size of the ash particles. Regarding the coal properties, the fuel ratio affected the ash particle size distribution. The density and shape of the ash particles strongly depended on their ash size. Our results indicated that the shape of the ash particles and the concentration of unburned carbon affected the specific surface area. The influence of the two-stage combustion ratio was limited. 8 refs., 13 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Structural and Physical Property Studies of Amorphous Zn-In-Sn-O Thin Films

The structures in amorphous (a-) Zn, Sn co-doped In 2 O 3 (ZITO) thin films grown by pulsed laser deposition on glass under varying oxygen pressure or with varying Sn:Zn ratios were determined using X-ray absorption spectroscopy and anomalous X-ray scattering. Typical structures around cations in a-ZITO films are described and compared with crystalline (c-) ZITO films. The results show that the Zn cations are fourfold coordinated with Zn–O bond lengths of 1.98 ± 0.02 Å, which is close to that in bulk ZnO. As a consequence, the second coordination shells around Zn contract. At longer distances away from Zn, the structure is commensurate with the averaged structure. The unit volume around In also contracts slightly compared to bulk In 2 O 3 , whereas the Sn–O bond length is similar to the one in bulk SnO 2 . These unique structural characteristics may account for the films' superior thermal stability over amorphous Sn-doped In 2 O 3 , and suggest that Zn and Sn act as network-forming cations. Like in c-ZITO, coordination numbers (N) around Sn, In, and Zn follow the order N Sn > N In > N Zn . Unlike in c-ZITO, where electrical properties change significantly with a slight variation in the Sn:Zn ratio, this variation does not markedly alter the electrical properties, or the local structures, of a-ZITO films. Dramatic changes in the electrical properties occur for films grown under various oxygen pressures, which point to oxygen “defects” as the source of charge carriers.

Proffit, Diana E↗

Magnetic order and heavy fermion behavior in CePd{sub 1+x}Al{sub 6-x}: Synthesis, structure, and physical properties

The physical properties including magnetic susceptibility, specific heat, and electrical resistivity of single crystals are reported for the compound CePd{sub 1+x}Al{sub 6-x} (x=0.5) which crystallizes in the tetragonal SrAu{sub 2}Ga{sub 5}-type structure (space group P4/mmm). The compound was grown from an excess of molten Al flux from the respective elements and the crystal structure was established from single-crystal X-ray diffraction. Anomalies in the low temperature specific heat C{sub p}(T) and electrical resistivity rho(T) show that the compound undergoes ferromagnetic order at T{sub C}=2.8 K. In the ordered state, CePd{sub 1.5}Al{sub 5.5} displays heavy fermion behavior with a Sommerfeld coefficient of ca. 500 mJ/mol-K{sup 2}. - Graphical abstract: The compound CePd{sub 1+x}Al{sub 6-x} (x=0.5) has been synthesized and structurally characterized by single-crystal X-ray diffraction. The measured physical properties of temperature and field dependent magnetic susceptibility, specific heat, and electrical resistivity suggests that the compound undergoes ferromagnetic order at ca. 2.8 K and further exhibits relatively heavy fermion behavior with a Sommerfeld coefficient of 500 mJ/mol-K2.

36 MATERIALS SCIENCE↗

Variation of Physical Properties in the Nominal Sr4V2O6Fe2As2

We show using a combination of powder X-ray and neutron diffraction, first-principles calculations, temperature- and field-dependent magnetization, heat capacity and resistivity data that the superconducting behavior of Sr{sub 4}V{sub 2}O{sub 6}Fe{sub 2}As{sub 2} is dependent on synthesis conditions, particularly, heating profiles result in unintentional chemical doping. This compound can be tuned from a state in which the vanadium electrons are itinerant with a high electronic density of states, to a state where the vanadium-oxide layers are insulating and presumably magnetic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of specimen size and grain orientation on the mechanical and physical properties of NBG-18 nuclear graphite

Here we present a comparison of the measured baseline mechanical and physical properties of with grain (WG) and against grain (AG) non-ASTM size NBG-18 graphite. The objectives of the experiments were twofold: (1) assess the variation in properties with grain orientation; (2) establish a correlation between specimen tensile strength and size. The tensile strength of the smallest sized (4 mm diameter) specimens were about 5% higher than the standard specimens (12 mm diameter) but still within one standard deviation of the ASTM specimen size indicating no significant dependence of strength on specimen size. The thermal expansion coefficient and elastic constants did not show significant dependence on specimen size. Lastly, experimental data indicated that the variation of thermal expansion coefficient and elastic constants were still within 5% between the different grain orientations, confirming the isotropic nature of NBG-18 graphite in physical properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Combined Experimental and Computational Study on Selected Physical Properties of Aminosilicones

A number of physical properties of aminosilicones have been determined experimentally and predicted computationally. It was found that COSMO-RS predicted the densities of the materials under study to within about 4% of the experimentally determined values. Vapor pressure measurements were performed, and all of the aminosilicones of interest were found to be significantly less volatile than the benchmark MEA material. COSMO-RS was reasonably accurate for predicting the vapor pressures for aminosilicones that were thermally stable. The heat capacities of all aminosilicones tested were between 2.0 and 2.3 J/(g.degrees C); again substantially lower than a benchmark 30% aqueous MEA solution. Surface energies for the aminosilicones were found to be 23.3-28.3 dyne/cm and were accurately predicted using the parachor method.

Perry, RJ↗

Effects of Al:Si and (Al + Na):Si ratios on the properties of the international simple glass, part I: Physical properties

Understanding composition-structure-property relationships of high-alumina nuclear waste glasses are important for vitrification of nuclear waste at the Hanford Site. Two series of glasses were designed, one with varying Al:Si ratios and the other with (Al+Na):Si ratios based on the International Simple Glass (ISG, a simplified nuclear waste model glass), with Al2O3 ranging from 0 to 23 mol % (0 to 32 wt. %). The glasses were synthesized and characterized using electron probe microanalysis, X-ray photoelectron spectroscopy, small angle X-ray scattering, high temperature oxide melt solution calorimetry, and infrared spectroscopy. Glasses were crystal free, and the lowest Na2O and Al2O3 glass formed an immiscible glass phase. Evolution of various properties - glass transition temperature, percentage of 4-coordinated B, enthalpy of glass formation - and infrared spectroscopy results indicate that structural effects differ based on the glass series.

Nuclear Waste Glass↗

Remotely sensed physical property estimation from powder contaminated surfaces

It is the intent of this paper to demonstrate the veracity of a method to estimate the total solid contaminant mass present on a sparsely coated surface encompassing a pixel from longwave infrared spectra. Sparsely coated surfaces create complex radiometry due to the interactions of electromagnetic energy between intimate materials. Current algorithms can be used on intimate mixtures to identify the abundances of materials in a pixel, but they cannot provide additional property information. Radiative transfer models can create mixture signatures, but only with a set of well-characterized physical parameters that are typically not known or are difficult to retrieve. Finally, the approach described here creates a parameter inversion model from a radiative transfer model and uses empirically measured mixture data to retrieve physical characteristics of the contaminated surface and derive a total contaminant mass present.

97 MATHEMATICS AND COMPUTING↗

Doping effect on the physical properties of Ca 10 Pt 3 As 8 (Fe 2 As 2 ) 5 single crystals

Ca 10 Pt 3 As 8 (Fe 2 As 2 ) 5 is a unique parent compound for superconductivity, which consists of both semiconducting Pt 3 As 8 and metallic FeAs layers. We report the observation of superconductivity induced via chemical doping in either Ca site using rare-earth (RE) elements (RE = La, Gd) or Fe site using Pt. The interlayer distance and the normal-state physical properties of the doped system change correspondingly. The coupled changes include (1) superconducting transition temperature T c increases with increasing both doping concentration and interlayer distance, (2) our T c value is higher than previously reported maximum value for Pt doping in the Fe site, (3) both the normal-state in-plane resistivity and out-of-plane resistivity change from non-metallic to metallic behavior with increasing doping concentration and T c , and (4) the transverse in-plane magnetoresistance (MR ab ) changes from linear-field dependence to quadratic behavior upon increasing T c . For La-doped compound with the highest T c (~35 K), upper critical fields ($H_{c2}^{ab} , H_{c2}^c$), coherence lengths (ξ ab , ξ c ), and in-plane penetration depth (λ ab ) are estimated. Finally, we discuss the relationship between chemical doping, interlayer distance, and physical properties in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗