Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOLUMINESCENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Optical suppression of defect-related photoluminescence in GeSn

Reports of photoluminescence from GeSn grown on Ge substrates by molecular beam epitaxy have been limited. We find that one limiting factor to observing photoluminescence is due to localized defect states marked by photoluminescence at 2400 nm and originating from the Ge substrate and buffer layer. In this study, we report on an optical study utilizing doped Ge(001) substrates to effectively suppress defect-related photoluminescence in GeSn layers by filling localized defect trap states. For this experiment, a GeSn layer with Sn content up to 10.5 ± 0.5% was grown on a doped Ge(001) substrate. Analysis of the physics of the photoluminescence spectrum collected from the GeSn thin film shows an emission at the expected wavelength of 2300 nm for 10.5 ± 0.5% Sn content and the absence of the typically observed defect-related signal at 2400 nm. This understanding is further confirmed using short-pulse optical excitation of the GeSn grown on undoped Ge substrates.

Chemical vapor deposition↗
DOE OSTI2026

Photoluminescence line shapes of nanocrystals: Contributions from first- and second-order vibronic couplings

Here, we present a microscopic, parameter-free approach for computing the photoluminescence spectra of a single semiconductor nanocrystal. The method derives exciton–phonon coupling directly from the semi-empirical pseudopotential framework and systematically incorporates both diagonal and off-diagonal exciton-phonon interactions, expanded to second-order in the phonon coordinates. The dipole–dipole correlation function was calculated using a Dyson expansion within the Kubo–Toyozawa formalism, enabling a consistent description of the role of pure dephasing and population transfer on the photoluminescence spectral features. Applied to CdSe/CdS core–shell nanocrystals, the approach quantitatively reproduces experimental photoluminescence spectra over a wide temperature range, revealing that quadratic phonon couplings account for nearly half of the homogeneous linewidth above ≈ 100−150 K, while off-diagonal couplings leading to exciton thermalization play only a minor role and only as T → 300 K.

Dephasing Rate↗
DOE OSTI2025

Rolling Behavior of Surface Tagged Aluminum 6061 using Photoluminescent Oxides

Physical tagging of nuclear fuel is potentially one way of tracking throughout the fuel lifecycle. The process of tagging can take many forms, but one promising method is to embed a small amount of photoluminescent particles in the surface of a material which are not detectable under normal illumination but are readily visible under excitation by ultraviolet light. The goal of this project was to explore the potential to tag simulated nuclear fuel cladding with small ceramic particles, via laser beam welding or gas tungsten arc welding, and measure the photoluminescent response. Surface tagging using this method has demonstrated viability and detectability throughout this project; work in FY24 focused on the survivability of these tags through subsequent deformation processing similar to what taggants in a fuel manufacturing environment would be subjected to. This work demonstrated that particles are readily visible in the as-welded state (i.e., before subsequent rolling treatment to represent mechanical processing of a fuel material), but visibility is reduced as the deformation is induced. Despite the reduction in photoluminescence, the taggants are still visible after rolling processes are performed, making this surface tagging technique a promising candidate for nuclear fuel cladding tagging. This work demonstrated, though, that targeted optimization work would be necessary to develop a robust taggant depending on the fidelity and luminescent properties required.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Influence of Structural Dynamics in Two-Dimensional Hybrid Organic–Inorganic Perovskites on Their Photoluminescence Efficiency — Neutron Scattering Analysis

Two-dimensional hybrid organic–inorganic perovskites (HOIPs) have emerged as promising materials for light-emitting diode applications. In this study, by using time-of-flight neutron spectroscopy we identified and quantitatively separated the lattice vibrational and molecular rotational dynamics of two perovskites, butylammonium lead iodide (BA)2PbI4 and phenethyl-ammonium lead iodide (PEA) 2 PbI 4 . By examining the corresponding temperature dependence, we found that the lattice vibrations, as evidenced by neutron spectra, are consistent with the lattice dynamics obtained from Raman scattering. We revealed that the rotational dynamics of organic molecules in these materials tend to suppress their photoluminescence quantum yield (PLQY) while the vibrational dynamics did not show predominant correlations with the same. Additionally, we observed photoluminescence emission peak splitting for both systems, which becomes prominent above certain critical temperatures where the suppression of PLQY begins. This study suggests that the rotational motions of polarized molecules may lead to a reduction in exciton binding energy or the breaking of degeneracy in exciton binding energy levels, enhancing non-radiative recombination rates, and consequently reducing photoluminescence yield. These findings offer a deeper understanding of fundamental interactions in 2D HOIPs and could guide the design of more efficient light-emitting materials for advanced technological applications.

Rajeev, Haritha Sindhu [Univ. of Virginia, Charlot↗
DOE OSTI2026

Using Explainable Artificial Intelligence to Predict Perovskite Solar Cell Electrical Metastability from Operando Photoluminescence Images in Accelerated Stress Testing

Metal halide perovskite (MHP) solar cells exhibit a metastable response to bias governed by coupled ionic–electronic processes, complicating the conventional reciprocity relation between luminescence intensity and device open-circuit voltage (V oc ). This limits the use of luminescence as a diagnostic for device screening or accelerated stress testing, motivating new approaches that can interpret photoluminescence (PL) signals under nonequilibrium conditions. From the artificial intelligence perspective, we develop an explainable deep learning framework that integrates convolutional neural networks (CNN), long short-term memory (LSTM) layers, and an attention mechanism to learn spatiotemporal features from operando photoluminescence PL image sequences. The model achieves a mean absolute error of ±0.027 V in predicting open-circuit voltage transients and reduces extreme-tail errors by up to 78% compared to physics-based reciprocity calculations. Gradient-weighted Class Activation Mapping (Grad-CAM) provides interpretability by highlighting physically meaningful regions such as electrode edges and emergent defect features. From the engineering application perspective, this framework enables accurate, contactless prediction of device V oc and identification of degradation-relevant features during accelerated aging of perovskite solar cells. This approach demonstrates how explainable AI can enhance operando diagnostics and reliability analysis in photovoltaic devices under nonequilibrium conditions.

14 SOLAR ENERGY↗
DOE OSTI2026

Lattice-Mismatched van der Waals Epitaxy and Photoluminescence of Two-Dimensional GaxIn1-xSe Alloys on Si(111)

GaxIn1-xSe (GIS) alloys are two-dimensional (2D) layered materials with band gaps and lattice parameters of interest for many energy and electronic applications. They can be fabricated using van der Waals epitaxy, which is an emerging technique that offers unprecedented opportunities for 2D optoelectronic devices and epitaxy processes. This work has demonstrated van der Waals epitaxy of GIS alloys for the first time. Films with x compositions of 0, 0.062, 0.164, 0.680, 0.894, and 1 and tunable lattice constants were grown on Si(111) substrates, and characterized by X-ray diffraction pole figure and transmission electron microscope analysis. In spite of the lattice mismatches (InSe is 4.1% too large and GaSe is 2.8% too small), these alloys grow epitaxially, with Si(111) || GIS(001) and Si[1-10] || GIS[100] orientation. Photoluminescence was used to measure tunable band gaps in the absorber-relevant 1.3-2.0 eV range as a function of x composition and showed GIS did not degrade after capping with Se and prolonged storage. Therefore, GIS alloys exhibit a technologically advantageous combination of tunable band gap and photoluminescence with relaxed lattice parameter and rotational registry with the substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Models and Measurements Quantify Photon Recycling, Charge-Carrier Diffusion and Photon Scattering Contributions to Photoluminescence in InP Nanowire Arrays

Nanowire arrays present many unique advantages for solar-to-chemical energy conversion. One possible advantage is that photon recycling between neighboring nanowires has the potential to increase solar energy conversion efficiencies. Here, in this work, we explore three underlying mechanisms of optical and electronic coupling between neighboring nanowires─incident photon scattering, photon recycling, and charge-carrier transport from the photoexcited nanowire to the neighboring nanowire via the underlying substrate─using single nanowire-level microscopy and spectroscopy measurements. We present a comprehensive analysis of light absorption and emission of a single nanowire at open circuit, and subsequent re-absorption and re-emission by a neighboring nanowire. We developed a novel correlated single nanowire microspectroscopy and widefield imaging methodology to spatially resolve photon communication pathways between neighboring nanowires and selectively image re-emitted and reflected photons. We developed unique multiphysics models to couple wave optics and semiconductor photophysics to especially isolate contributions from photon recycling and electronic transport to photon emission from neighboring nanowires. By systematically varying the morphologies of the nanowires modeled, we identified pathways to maximize photon recycling between neighboring nanowires. We concluded that the measured photoluminescence is more strongly influenced by the diffusion of charge carriers as compared to photon recycling in materials with moderate-to-large charge-carrier mobilities (>10 cm 2 V –1 s –1 ), and that photon recycling dictates photoluminescence intensity only when the charge-carrier mobility is low (<1 cm 2 V –1 s –1 ). The experimental and simulation platforms developed herein for photon management strategies can be leveraged by the semiconductor photocatalysis community to enhance solar-to-chemical conversion efficiencies in semiconductor nanowire arrays.

25 ENERGY STORAGE↗
DOE OSTI2024

Photoluminescence of a Uranium(IV) Alkoxide Complex

In this report, we describe the photoluminescence of a homoleptic uranium(IV) alkoxide complex. Excitation of [Li(THF)] 2 [U IV (O t Bu) 6 ] leads to the first example of photoluminescence from a well-defined actinide complex originating from an f–f excitation, supported by second order multiconfigurational electronic structure calculations including spin–orbit coupling. These calculations show strong spin–orbit coupling between the excited triplet and singlet states for the 5f-orbital manifold, which leads to a long-lived excited state lifetime of 0.85 s at low temperature. The photophysical properties of homoleptic uranium(V) and uranium(VI) tertbutoxide complexes are also presented; we find that oxidation of the uranium(IV) alkoxide results in quenching of luminescence in [Li(THF)][U V (O t Bu) 6 ] and [U VI (O t Bu) 6 ]. This is attributed to competing ligand to metal charge transfer absorption processes shifted to lower energy upon oxidation of the actinide center, which mask the relevant f–f transitions in the visible region of the electronic absorption spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unusually Strong Near‐Infrared Photoluminescence of Highly Transparent Bulk InSe Flakes

Abstract Bulk γ‐InSe has a direct bandgap of 1.24 eV, which corresponds to near infrared wavelengths ( λ = 1.0 µm) useful in optoelectronic applications from biometric detectors to silicon photonics. However, its potential for optoelectronic applications is largely untapped due in part to the lack of quantitative studies of its optical properties. Here, the unusually low absorptance and high photoluminescence quantum efficiency of single‐crystalline InSe flakes with thickness in the hundreds of nanometers are studied. InSe emits brightly at room temperature from its direct bandgap with a peak photoluminescence quantum yield (PLQY) of 20%, despite displaying indirect bandgap like low absorption coefficient due to the symmetry of its crystal structure. By performing pump‐dependent PLQY measurements, the radiative and nonradiative recombination coefficients are extracted, including the Shockley‐Read‐Hall and Auger coefficients. Finally, a proof‐of‐concept alternating current electroluminescent device at low temperature is demonstrated to show the promise of InSe in optoelectronic technology such as highly transparent, bright NIR light sources.

Geng, Jamie↗
DOE OSTI2024

Photoluminescence Switching in Quantum Dots Connected with Carboxylic Acid and Thiocarboxylic Acid End-Group Diarylethene Molecules

We contrast the switching of photoluminescence (PL) of PbS quantum dots (QDs) cross-linked with photochromic diarylethene molecules with different end groups, 4,4′-(1-cyclopentene-1,2-diyl)bis[5-methyl-2-thiophenecarboxylic acid] ( 1C ) and 4,4′-(1-cyclopentene-1,2-diyl)bis[5-methyl-2-thiophenethiocarboxylic acid] ( 2T ). Our results show that the QDs cross-linked with the carboxylic acid end group molecules ( 1C ) exhibit a greater amount of switching in photoluminescence intensity compared to QDs cross-linked with the thiocarboxylic acid end group ( 2T ). We also demonstrate that regardless of the molecule used, greater switching amounts are observed for smaller quantum dots. Varying these parameters allows for the fabrication of photoswitches with tunable PL change. We relate these observations to the differences in the HOMO energy levels between the QDs and the photochromic molecules. Our findings demonstrate how the size of the QDs and the energy levels of the linker ligands influences the charge tunneling rate and thus the PL switching performance in tunneling-based photoswitches.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Optical Waveguiding Charge-Transfer Cocrystals: Examining the Impact of Molecular Rotations on Their Photoluminescence

Here, we present the first example of a binary optical waveguiding (OWG) cocrystal with large anisotropy featuring a fluorinated acceptor molecule (CPP-TFPN, 1) with on-plane rotational dynamics, confirmed by solid-state NMR ( 19 F T 1 ) and theoretical calculations. Spatially resolved microphotoluminescence and variable-temperature photoluminescence experiments allowed us to examine the OWG performance and photophysical properties of both single crystals and bulk microcrystalline samples. A comparison with an analogous cocrystal containing a regioisomeric acceptor (CPP-TFTN, 2) revealed that the photoluminescence characteristics of 1 are associated with the rotational motions of the acceptor, offering insights into how the molecular motion changes this property.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photoluminescence Excitation Spectroscopy of Monolithic Perovskite/Silicon Tandem Solar Cells

The contributions of each subcell to the total photoluminescence (PL) spectrum of a monolithic perovskite/silicon tandem solar cell are distinguished using a variable wavelength excitation laser source. Here, in the results, a strong overlap of the PL spectrum is shown, originating from the sub‐bandgap region of the perovskite top cell with the emission from the silicon bottom cell, even with near‐infrared excitation wavelengths. Consequently, an excitation laser wavelength of at least 815 nm is required for a dominant PL signal from the silicon bottom cell, and a wavelength no longer than 750 nm is needed for a dominant PL signal from the perovskite top cell in the investigated tandem solar cell. Moreover, a shoulder in the sub‐bandgap emission of the perovskite top cell almost coincides with the PL response region of the silicon bottom cell, which can cause signal confusion in subcell characterization.

14 SOLAR ENERGY↗
DOE OSTI2026

Backbone Stiffness‐Dependent Photoluminescence of Pendant Fluorophores in Organic Nanoparticles

Fluorescent organic nanoparticles (FoNPs) with backbone stiffness‐dependent photoluminescence were synthesized via microemulsion atom transfer radical polymerization (ATRP) of 2‐(2‐bromoisobutyryloxy)ethyl methacrylate (BiBEM), ethylene glycol dimethacrylate (EGDMA), and methacrylate monomers bearing pendant fluorophores, 1‐pyrenemethyl methacrylate (PyMMA), or 4‐(1,2,2‐triphenylethenyl)benzenemethyl methacrylate (TPEMMA). The crosslinking density precisely tuned the intraparticle rigidity, enabling systematic control over emission mechanisms. Pyrene‐containing FoNPs exhibited a rigidity‐dependent transition from excimer‐dominated to monomer‐dominated fluorescence, whereas TPE‐based FoNPs displayed aggregation‐induced emission (AIE) enhancement as intramolecular motion was restricted. Solvent‐dependent studies revealed that increased polarity and viscosity, particularly in benzyl alcohol and DMSO, promoted cooperative rigidification and enhanced emission intensity through specific polymer–solvent interactions. Furthermore, the retained alkyl bromide chain ends on FoNPs enabled dual roles as initiators and crosslinkers in UV‐induced polymerization of poly(ethylene glycol) acrylates, forming luminescent FoNP–OEG hybrid gels with improved mechanical robustness. This work establishes a versatile platform for integrating tunable optical and mechanical properties into a single polymeric nanoparticle framework, offering new design principles for multifunctional soft materials and providing a platform for future sensing, imaging, and photonic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Emergent Above-Gap Photoluminescence in Molecularly Engineered Hybrid Bilayer Crystals

Bilayer crystals, built by stacking two-dimensional (2D) covalent monolayers, give rise to coupled excitonic states whose properties are constrained by fixed lattice symmetry and orientation. Replacing one covalent monolayer with a 2D molecular crystal––held together by non-covalent forces––overcomes this limitation, as molecular functional groups afford tunable in-plane lattice geometry, intermolecular spacing, and interlayer coupling, providing a powerful knob for exciton engineering. Here, in this study, we report four-atom-thick hybrid bilayer crystals (HBCs) synthesized by directly growing single-crystalline PDI molecular crystal atop WS 2 monolayers, which exhibit a robust photoluminescence (PL) peak 120 meV above the WS 2 optical band gap alongside a belowgap emission. Both peaks display strong polarization anisotropy—nearing unity for the above-gap emission—and maintain a perfectly linear power-law dependence up to an excitation density of ~10 7 mW/cm 2 , indicative of coexisting localized and delocalized excitonic states. Substituting PDI with a PTCDA monolayer on WS 2 fully quenches PL, demonstrating molecular control over excitonic emission. Lattice scale ab initio GW and GW-BSE calculations reveal a significantly hybridized bilayer band structure in PDI/WS 2 that supports interlayer excitonic species both above and below the WS 2 gap with strong polarization anisotropy, in excellent agreement with experiment. Our work introduces a molecule-based bilayer platform for the bottom-up design and control of excitonic phenomena in atomically thin optoelectronic and quantum materials.

2D materials↗
DOE OSTI2025

Dual Photoluminescence in Low-Temperature Phase of CsSnI 3 Nanocrystals

The expression of metal lone-pair electrons is hypothesized to underpin many of the interesting properties of inorganic halide perovskite semiconductors. Recently, a stable low-temperature monoclinic polar phase was predicted for CsSnBr 3 and CsSnI 3 , opening the possibility of direct investigation of a ferroelectric distorted structure compared to the undistorted structure. To date, there have been no experimental reports of such a structure in CsSnI 3 , and the low-temperature optical properties of CsSnI 3 nanocrystals have remained unexplored. Here we report optical and structural evidence of a phase transition around 240 K in 8.9 nm CsSnI 3 nanocrystals. Several changes in optical behavior occur below this transition point, including high-energy photoluminescence (PL) that emits concurrently with the exciton PL. The emergence of this high-energy PL is correlated with X-ray diffraction (XRD) and differential scanning calorimetry (DSC) supporting a phase transition from the orthorhombic structure between 240-200 K. Transient absorption measurements show an increase in the excited state lifetimes, i.e., slowed carrier cooling, at 200 K when photoexciting with photon energies above the high-energy state, consistent with slowed carrier cooling and emergence of high-energy PL. We hypothesize that the slowed carrier cooling is distinctive to this phase transition that modifies both the electronic and phonon structures that dictate excited-state carrier dynamics, and we discuss these changes.

14 SOLAR ENERGY↗
DOE OSTI2024

Properties of V-defect injectors in long wavelength GaN LEDs studied by near-field electro- and photoluminescence

The efficiency of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on uniformity of hole distribution between the QWs. Typically, transport between the QWs takes place via carrier capture into and thermionic emission out of the QWs. In InGaN/GaN QWs, the thermionic hole transport is hindered by the high quantum confinement and polarization barriers. To overcome this drawback, hole injection through semipolar QWs located at sidewalls of V-defects had been proposed. However, in the case of the V-defect injection, strong lateral emission variations take place. In this work, we explore the nature of these variations and the impact of the V-defects on the emission spectra and carrier dynamics. The study was performed by mapping electroluminescence (EL) and photoluminescence (PL) with a scanning near-field optical microscope in LEDs that contain a deeper well that can only be populated by holes through the V-defects. Applying different excitation schemes (electrical injection and optical excitation in the far- and near-field), we have shown that the EL intensity variations are caused by the lateral nonuniformity of the hole injection. We have also found that, in biased structures, the PL intensity and decay time in the V-defect regions are only moderately lower that in the V-defect-free regions thus showing no evidence of an efficient Shockley-–Read–Hall recombination. In the V-defect regions, the emission spectra experience a red shift and increased broadening, which suggests an increase of the In content and well width in the polar QWs close to the V-defects.

Electroluminescence↗
DOE OSTI2025

Robust quantification of the diamond nitrogen-vacancy center charge state via photoluminescence spectroscopy

Nitrogen vacancy (NV) centers in diamond are at the heart of many emerging quantum technologies, all of which require control over the NV charge state. Hence, methods for quantification of the relative photoluminescence intensities of the NV 0 and NV − charge states, i.e., a charge state ratio, are vital. Several approaches to quantify NV charge state ratios have been reported but are either limited to bulk-like NV diamond samples or yield qualitative results. We propose an NV charge state quantification protocol based on the determination of sample- and experimental setup-specific NV 0 and NV − reference spectra. The approach employs blue (400–470 nm) and green (480–570 nm) excitation to infer pure NV 0 and NV − spectra, which are then used to quantify NV charge state ratios in subsequent experiments via least squares fitting. We test our dual excitation protocol (DEP) for a bulk diamond NV sample and 20 and 100 nm nanodiamond particles and compare results with those obtained via other commonly used techniques such as zero-phonon line fitting and non-negative matrix factorization. We find that DEP can be employed across different samples and experimental setups and yields consistent and quantitative results for NV charge state ratios that are in agreement with our understanding of NV photophysics. By providing robust NV charge state quantification across sample types and measurement platforms, DEP will support the development of NV-based quantum technologies.

Color center laser spectroscopy↗
DOE OSTI2025

Keldysh tuning of photoluminescence in a lead halide perovskite crystal

In 1964, Keldysh laid the groundwork for strong-field physics in atomic, molecular, and solid-state systems by delineating a ubiquitous transition from multiphoton absorption to quantum electron tunneling under intense AC driving forces. While both processes in semiconductors can generate carriers and result in photon emission through electron-hole recombination, the low quantum yields in most materials have hindered direct observation of the Keldysh crossover. Leveraging the large quantum yields of photoluminescence in lead halide perovskites, we show that we can not only induce bright light emission from extreme sub-bandgap light excitation but also distinguish between photon-induced and electric-field-induced processes. Our results are rationalized by the Landau-Dykhne formalism, providing insights into the non-equilibrium dynamics of strong-field light-matter interactions. These findings open new avenues for light upconversion and sub-bandgap photon detection, highlighting the potential of lead halide perovskites in advanced optoelectronic applications.

FOS: Physical sciences↗