Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSGENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Phosgene

Inhalation is the most important route of exposure for phosgene. A latency period occurs before phosgene affects the target organ, the lungs. The odor threshold is between 0.5 and 1.5 ppm, and the odor has been described as similar to newly-mown hay. Toxic effects have been reported at concentrations below the threshold. On initial exposure, phosgene can undergo hydrolysis and form hydrogen chloride which can be slightly irritating to the upper respiratory tract and eyes; the amount formed is limited by the low water solubility of phosgene. Once inhaled to the lower respiratory tract, phosgene undergoes an acylation reaction with amino, hydroxyl and sulfhydryl groups causing destruction of protein, lipids, and disruption of cellular functions. In response to this destruction, after a latency period of 1-24 hours, a breakdown in the blood-air barrier occurs and protein rich fluid accumulates in the lungs. Most commonly, death occurs within 48 hours after exposure from a progressive pulmonary edema and anoxia. At very high concentrations, death can occur from acute heart failure prior to the start of the pulmonary edema. Data on humans are limited to occupational exposures or accounts from the use of phosgene in World War I. Animal studies with phosgene show a steep dose-response curve for pulmonary edema and mortality. Animal studies also indicate little species variability as all species exposed developed similar clinical signs (dyspnea, pulmonary edema, labored breathing) and histopathological lesions in the lungs. While there are no chronic animal data, subchronic studies indicate little accumulation of phosgene or increased severity of lesions with continuous exposure.

54 ENVIRONMENTAL SCIENCES↗

Cutaneous exposure to vesicant phosgene oxime: Acute effects on the skin and systemic toxicity

Phosgene Oxime (CX), an urticant or nettle agent categorized as a vesicant, is a potential chemical warfare and terrorist weapon. Its exposure can result in widespread and devastating effects including high mortality due to its fast penetration and ability to cause immediate severe cutaneous injury. It is one of the least studied chemical warfare agents with no effective therapy available. Thus, our goal was to examine the acute effects of CX following its cutaneous exposure in SKH-1 hairless mice to help establish a relevant injury model. Results from our study show that topical cutaneous exposure to CX vapor causes blanching of exposed skin with an erythematous ring, necrosis, edema, mild urticaria and erythema within minutes after exposure out to 8 h post-exposure. These clinical skin manifestations were accompanied with increases in skin thickness, apoptotic cell death, mast cell degranulation, myeloperoxidase activity indicating neutrophil infiltration, p53 phosphorylation and accumulation, and an increase in COX-2 and TNFα levels. Topical CX-exposure also resulted in the dilatation of the peripheral vessels with a robust increase in RBCs in vessels of the liver, spleen, kidney, lungs and heart tissues. These events could cause a drop in blood pressure leading to shock, hypoxia and death. Together, this is the first report on effects of CX cutaneous exposure, which could help design further comprehensive studies evaluating the acute and chronic skin injuries from CX topical exposure and elucidate the related mechanism of action to aid in the identification of therapeutic targets and mitigation of injury. - Highlights: • Phosgene oxime cutaneous exposure causes skin blanching, edema and urticaria. • Penetration of phosgene oxime causes dilation of vasculature in internal organs. • Mast cells could play an important role in phosgene oxime-induced skin injury. • Phosgene oxime could induce low blood pressure and hypoxia leading to mortality. • Data is significant for developing a phosgene oxime-induced skin injury model.

60 APPLIED LIFE SCIENCES↗

PROVISIONAL ADVISORY LEVELS (PALs) FOR PHOSGENE (CG)

The PAL protocol was applied to estimate inhalation exposure limits for phosgene (CG). Data on humans are limited to occupational exposures or accounts from the use of phosgene as a chemical warfare agent in WWI. Animal studies with phosgene show a steep dose-response curve for pulmonary edema and mortality with little species variability in effects. Although immediately upon exposure lacrimation and upper respiratory irritation can occur, the main effect in the target organ, a progressive pulmonary edema, occurs after a latency period of 1-24 hours. PAL estimates were approved by the Expert Consultation Panel for Provisional Advisory Levels in May 2007. Exposure limits for oral exposure to CG are not developed due to insufficient data. PAL estimates for inhalation exposure to CG are presented: The 24-hour PAL values for severity levels 1, 2, and 3 are 0.0017, 0.0033 and 0.022 ppm, respectively. The 30-day PAL values are 0.0006 and 0.0012 ppm for the PAL 1 and 2 values, respectively. These 30-day inhalation values were also accepted as the 90-day and 2-year PAL 1 and 2 values. Data were not available for deriving 30-day, 90-day and 2-year PAL 3 values.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Phosgene Neutralization Chemistry for the Explosive Destruction System (EDS)

This report summarizes activities at Sandia National Laboratories as part of the Explosive Destruction System (EDS) Phase 3 (P3) System design. An exploration of chemical neutralization strategies of phosgene was conducted for safe disposal of recovered mortars and M79 1000 lb. bombs filled with carbonyl dichloride "phosgene" or "CG agent" (molecular formula = COCl 2 ). The incumbent strategy utilized aqueous sodium hydroxide was found to be the worst-case scenario, producing enough CO 2 gas that would cause an unacceptable pressure and temperature spike. Several chemical neutralization strategies were evaluated based on criteria set by the operating envelope of the P3 design. In the end, it was determined that a pure solution of N-methyl ethanolamine (MeEA) or 90% monoethanolamine (MEA)(aqueous) provided the best balance reaction profile, cost, and safety.

36 MATERIALS SCIENCE↗

Discrimination of phosgene from cyanogen chloride in recovered chemical munitions using tagged neutron interrogation with high-resolution gamma-ray spectroscopy

The Associated Particle technique has recently been utilized with a germanium-based high-resolution $\gamma$-ray spectrometer and assessed for its capability to improve field identification of recovered chemical warfare (CW) materiel through prompt gamma-ray neutron activation analysis (PGNAA) measurements. An accurate chemical identification is necessary for the safe handling, destruction, and disposal of such hazardous items. A particularly challenging pair of CW agents commonly found in recovered munitions are phosgene (CG) and cyanogen chloride (CK), which have two of three elements in common, i.e. chlorine and carbon, but differ in the third being either oxygen or nitrogen. The detection of both latter elements is complicated by high oxygen concentration in the field environment which interferes with the small signal produced from the chemical agents. The matter is further complicated by the precautionary field practice of overpacking recovered munitions with vermiculite in larger steel multiple round containers (MRCs), which places additional oxygen-rich material around the munition while further attenuating an already weak signal emitted from the munition center. Here, this work reports quantitative results from realistic field measurements of CG and CK simulants in mock 4.2-inch mortar rounds overpacked with vermiculite in a large MRC. Results obtained with the AP technique are compared to those obtained with the traditional PGNAA approach for both overpacked- and bare-munition measurements. The AP technique is shown to provide a much more confident discrimination between the two chemicals, particularly for the more challenging field-relevant overpacked measurements, where a significant gain in sensitivity to all the key elements chlorine, carbon, nitrogen and oxygen is achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Photodissociation of phosgene: Theoretical evidence for the ultrafast and synchronous concerted three-body process

The potential energy surfaces for Cl{sub 2}CO dissociation into CO+Cl+Cl in the lowest two electronic singlet states (S{sub 0} and S{sub 1}) have been determined by the complete active space self-consistent field, coupled-cluster method with single and double excitations (CCSD), and equation-of-motion CCSD calculations, which are followed by direct ab initio molecular dynamics simulations to explore its photodissociation dynamics at 230 nm. It is found that the C-O stretching mode is initially excited upon irradiation and the excess internal energies are transferred to the C-Cl symmetric stretching mode within 200 fs. On average, the first and the second C-Cl bonds break completely within subsequent 60 and 100 fs, respectively. Electronic structure and dynamics calculations have thus provided a strong evidence that the photoinitiated dissociation of Cl{sub 2}CO at 230 nm or shorter wavelengths is an ultrafast, adiabatic, and concerted three-body process. Since the two C-Cl bonds begin to break at the same time and the time interval between the two C-Cl bond broken fully is very short ({approx}40 fs), the photoinitiated dissociation of Cl{sub 2}CO to CO+2Cl can be considered as the synchronous concerted process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosgene

Explore the source record for details and available documents.

Bast, Cheryl B↗

Exposure-Relevant Ozone Chemistry in Occupied Spaces

Ozone, an ambient pollutant, is transformed into other airborne pollutants in the indoor environment. In this dissertation, the type and amount of byproducts that result from ozone reactions with common indoor surfaces, surface residues, and vapors were determined, pollutant concentrations were related to occupant exposure, and frameworks were developed to predict byproduct concentrations under various indoor conditions. In Chapter 2, an analysis is presented of secondary organic aerosol formation from the reaction of ozone with gas-phase, terpene-containing consumer products in small chamber experiments under conditions relevant for residential and commercial buildings. The full particle size distribution was continuously monitored, and ultrafine and fine particle concentrations were in the range of 10 to>300 mu g m -3 . Particle nucleation and growth dynamics were characterized.Chapter 3 presents an investigation of ozone reactions with aircraft cabin surfaces including carpet, seat fabric, plastics, and laundered and worn clothing fabric. Small chamber experiments were used to determine ozone deposition velocities, ozone reaction probabilities, byproduct emission rates, and byproduct yields for each surface category. The most commonly detected byproducts included C1?C10 saturated aldehydes and skin oil oxidation products. For all materials, emission rates were higher with ozone than without. Experimental results were used to predict byproduct exposure in the cabin and compare to other environments. Byproduct levels are predicted to be similar to ozone levels in the cabin, which have been found to be tens to low hundreds of ppb in the absence of an ozone converter. In Chapter 4, a model is presented that predicts ozone uptake by and byproduct emission from residual chemicals on surfaces. The effects of input parameters (residue surface concentration, ozone concentration, reactivity of the residue and the surface, near-surface airflow conditions, and byproduct yield) were explored. In Chapter 5, the reaction of ozone with permethrin, a residual insecticide used in aircraft cabins, to form phosgene is investigated. A derivatization technique was developed to detect phosgene at low levels, and chamber experiments were conducted with permethrin-coated cabin materials. It was determined that phosgene formation, if it occurs in the aircraft cabin, is not likely to exceed the relevant, health-based phosgene exposure guidelines.

54 ENVIRONMENTAL SCIENCES↗

Environmental life cycle assessment methods applied to amine-ionic liquid hybrid CO 2 absorbents

A hybrid solvent mixture of triethyl(octyl)phosphonium cyanopyrrolide [P2228][2-CNPyr] and aqueous monoethanolamine (MEA) has the potential for absorbing CO 2 from post combustion flue gas. However, previous studies have found that the production of phosphonium based ionic liquids (IL) had significantly higher potential environmental impacts compared to MEA. Literature attributes these higher environmental impacts to the phosphine and phosgene-based intermediates required to produce the phosphonium ion of the ionic liquid. This study proposes a novel synthesis pathway that eliminates the need for phosphine and phosgene intermediates in the production of [P2228][2-CNPyr]. The environmental impacts of producing 1kg of the ionic liquid through this novel synthesis route was evaluated using the TRACI 2.1 methodology within the life cycle assessment (LCA) framework. Additionally, the environmental impacts for the production of 1kg of a hybrid solvent was also evaluated and compared against MEA. The life cycle inventory for the production of the IL and its hybrid solvent were calculated based on the stoichiometry and then scaled up. This study found that the IL and its hybrid solvents had higher environmental impacts among 9 of the 10 environmental impact categories calculated by the TRACI 2.1 methodology, except for the ecotoxicity potential. A sensitivity analysis indicated that these solvents were more sensitive to the assumptions of the material requirements of the phosphonium cation than the overall energy or transportation requirements. Despite this sensitivity, both the solvents demonstrated a lower Ecotoxicity Potential compared to MEA, the rest of the environmental impacts were still found to be higher than that of MEA, thereby underscoring the need to investigate novel synthesis routes for the production of phosphonium cation. The uncertainty analysis performed confirmed the findings that the IL has a higher environmental impact potentials across all categories except ecotoxicity potential. The uncertainty analysis also confirms that the phosphonium cation is a major hotspot in production route of these solvents and a source of uncertainty in the model compared to the anion. Altogether, this study underscores the need for investigating novel green chemistry pathway for the synthesis of phosphonium based ionic liquids, such as [P2228][2-CNPyr], to ensure that the these ILs can be a truly green alternative to MEA by not only offering superior CO₂ capture capacity compared to MEA but also being sustainably produced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variation of Aliphatic Diisocyanates in Bio-Based TPUs

The utilization of bio-based materials for polymer production poses a challenge to both the industrial and academic sectors due to the availability and production costs of the necessary raw materials. Diisocyanates necessary for polyurethane synthesis have posed a particular challenge, given the paucity of natural diamine precursors for traditional phosgenation. We recently developed a phosgene-free flow chemistry methodology that allows for the safe, efficient, and scalable preparation of diisocyanates from naturally produced diacids. This chemistry broadens the potential for the development of renewable diisocyanates for a broad variety of applications. Here, we expand upon this work by demonstrating the scaled production of a panel of bio-based linear, aliphatic diisocyanates, with chain lengths ranging from four to eight carbons in good yields of 57–81% and high purity (~97%). Furthermore, these are applied to the synthesis of thermoplastic polyurethanes (TPUs) containing up to a 100% renewable carbon content. TPUs formulated using shorter carbon-chained diisocyanates displayed a higher tensile strength compared to those formulated using longer chains. Ready access to diisocyanates of varying chain length affords the ability to tailor TPU properties through careful selection of the diisocyanate, polyol, and chain extender, offering hard and soft TPUs for multiple end-use applications.

36 MATERIALS SCIENCE↗

Developing health-based pre-planning clearance goals for airport remediation following chemical terrorist attack: Introduction and key assessment considerations

In the event of a chemical terrorist attack on a transportation hub, post-event remediation and restoration activities necessary to attain unrestricted facility re-use and re-entry could require hours to multiple days. While restoration timeframes are dependent on numerous variables, a primary controlling factor is the level of pre-planning and decision-making completed prior to chemical terrorist release. What follows is the first of a two-part analysis identifying key considerations, critical information, and decision criteria to facilitate post-attack and post-decontamination consequence management activities. A conceptual site model and human health-based exposure guidelines are developed and reported as an aid to site-specific pre-planning in the current absence of U.S. state or Federal values designated as compound-specific remediation or re-entry concentrations, and to safely expedite facility recovery to full operational status. Chemicals of concern include chemical warfare nerve and vesicant agents and the toxic industrial compounds phosgene, hydrogen cyanide, and cyanogen chloride. This work has been performed as a national case study conducted in partnership with the Los Angeles International Airport and The Bradley International Terminal. All recommended guidelines have been selected for consistency with airport scenario release parameters of a one-time, short-duration, finite airborne release from a single source followed by compound-specific decontamination.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Health-based Provisional Advisory Levels (PALs) for Homeland Security

In compliance with Homeland Security Presidential Directive No.8, the US EPA National Homeland Security Research Center, in collaboration with the Department of Energy, is developing health-based Provisional Advisory Levels (PALs) for priority toxic industrial chemicals, pesticides, and chemical warfare agents in air and drinking water. The PALs Program will provide exposure levels to assist emergency response decision-making, and to serve as criteria for determining re-use and re-entry into affected areas resulting from transport/storage accidents, natural disasters, and subversive activities. PALs are applicable at federal, state, and local levels, and are intended for use in homeland security efforts, public health, law enforcement, and emergency response, as well as decisions by water utilities, and national and regional EPA offices. PALS have not been promulgated nor have they been formally issued as regulatory guidance. They are intended to be used at the discretion of risk managers in emergency situations when site specific risk assessments are not available. Three levels (PAL 1, PAL 2, and PAL 3), distinguished by severity of toxic effects, are developed for 24-hour, 30-day, 90-day, and 2-year durations of potential drinking water and inhalation exposures for the general public. Draft PALs are evaluated both by an EPA working group, and an external multidisciplinary panel to ensure scientific credibility and wide acceptance. In this issue, we present background information on the PAL program, the methodology used in deriving PALs, and the technical support documents for the derivation of PALs for acrylonitrile, phosgene, hydrogen chloride, and hydrogen sulfide.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Materials Data on CCl2O by Materials Project

COCl2 crystallizes in the tetragonal I4_1/a space group. The structure is zero-dimensional and consists of sixteen phosgene molecules. C4+ is bonded in a trigonal planar geometry to one O2- and two Cl1- atoms. The C–O bond length is 1.20 Å. There is one shorter (1.73 Å) and one longer (1.75 Å) C–Cl bond length. O2- is bonded in a single-bond geometry to one C4+ atom. There are two inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one C4+ atom. In the second Cl1- site, Cl1- is bonded in a single-bond geometry to one C4+ atom.

36 MATERIALS SCIENCE↗

Report of Viscosity Measurements on Reaction Simulant and 2-(methylamino) ethanol carbamate (NMEA carbamate) for the Explosives Destruction System (EDS) P3 System

The reaction products for the proposed chemistry for phosgene treatment in the Explosive Destruction System (EDS) are viscous. This will affect the time required to drain the EDS vessel. Viscosity measurements were made on two samples and the results for one sample have been fit to curves.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Microwave-Assisted Production of Polycarbonate Diols using Carbon Dioxide

Carbon dioxide (CO2) is a cheap and readily available resource that can be converted to value-added chemicals including fuels, polymers, and other products. One lucrative option is polycarbonate diols, which are the precursor to polyurethanes that find wide applications in automotive and aerospace industries. The traditional process for the synthesis of polycarbonate diols involves using hazardous phosgene and alcohols in a strongly basic medium that generates significant amounts of salt. Alternately, CO2 can be reacted with alkanediols over CeO2 catalysts to produce polycarbonate diols. For the current work, a microwave-assisted atmospheric flow system was investigated for converting CO2 into polycarbonate diols and was compared against a thermal system. Various parameters such as type and ratio of solvents, and the addition of dehydrating agents for the microwave system was tested. The different CeO2 catalysts used were characterized using Brunauer–Emmett–Teller (BET) surface area analysis, Raman spectroscopy, X-ray diffraction, and temperature programmed desorption (NH3-TPD and CO2-TPD).

CO2 utilization↗

Devices and methods to detect and quantify trace gases

Sensing devices based on a surface acoustic wave ("SAW") device coated with an absorbent crystalline or amorphous layer for detecting at least one chemical analyte in a gaseous carrier. Methods for detecting the presence of a chemical analyte in a gaseous carrier using such devices are also disclosed. The sensing devices and methods for their use may be configured for sensing chemical analytes selected from the group consisting of water vapor, carbon dioxide, methanol, ethanol, carbon monoxide, nitric oxide, nitrous oxide, organic amines, organic compounds containing NO.sub.2 groups, halogenated hydrocarbons, acetone, hexane, toluene, isopropanol, alcohols, alkanes, alkenes, benzene, functionalized aromatics, ammonia (NH.sub.3), phosgene (COCl.sub.2), sulfur mustard, nerve agents, sulfur dioxide, tetrahydrofuran (THF) and methyltertbutyl ether (MTBE) and combinations thereof.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗