Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHONONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Controlling interactions between high-frequency phonons and single quantum systems using phononic crystals

The ability to control phonons in solids is key in many fields of quantum science, ranging from quantum information processing to sensing. Phonons often act as a source of noise and decoherence when solid-state quantum systems interact with the phonon bath of their host matrix. In this study, we demonstrate the ability to control the phononic local density of states of the host matrix using phononic crystals and measure its positive impact on single quantum systems. We design and fabricate diamond phononic crystals with features down to around 20 nm, resulting in a high-frequency complete phononic bandgap from 50 to 70 GHz. The engineered local density of states is probed using single silicon-vacancy colour centres embedded in the phononic crystals. We observe an 18-fold reduction in the phonon-induced orbital relaxation rate of the emitters compared to bulk, thereby demonstrating that the phononic crystal suppresses spontaneous single-phonon processes. Furthermore, we show that our approach can efficiently suppress single-phonon-emitter interactions up to 20 K, allowing the investigation of multi-phonon processes in the emitters. Our results represent an important step towards the realization of efficient phonon-emitter interfaces that can be used for quantum acoustodynamics and quantum phononic networks.

quantum information↗
DOE OSTI2023

Electronic heat generation in semiconductors: Non-equilibrium excitation and evolution of zone-edge phonons via electron–phonon scattering in photo-excited germanium

We investigate experimentally and using first-principles theory the generation of phonons and the relaxation of carriers on picosecond timescales across the Brillouin zone of photo-excited Ge by inter-valley electron–phonon scattering. The phonons generated are typical of those generated in semiconductor devices, contributing to the accumulation of heat within the material. We simulate the time-evolution of phonon populations, based on first-principles band structure and electron–phonon and phonon–phonon matrix elements, and compare them to data from time-resolved x-ray diffuse scattering experiments, performed at the Linac Coherent Light Source x-ray free-electron laser facility, following photo-excitation by a 50 fs near-infrared optical pulse. We show that the intensity of the non-thermal x-ray diffuse scattering signal, which is observed to grow substantially near the L-point of the Brillouin zone over 3–5 ps, is due to phonons generated by scattering of carriers between the Δ and L valleys. These phonons have low group velocities, resulting in a heat bottleneck. With the inclusion of phonon decay through 3-phonon processes, the simulations also account for other non-thermal features observed in the x-ray diffuse scattering intensity, which are due to anharmonic phonon–phonon scattering of the phonons initially generated by electron–phonon scattering.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Mutual spin-phonon driving effects and phonon eigenvector renormalization in nickel (II) oxide

The physics of mutual interaction of phonon quasiparticles with electronic spin degrees of freedom, leading to unusual transport phenomena of spin and heat, has been a subject of continuing interests for decades. Despite its pivotal role in transport processes, the effect of spin-phonon coupling on the phonon system, especially acoustic phonon properties, has so far been elusive. By means of inelastic neutron scattering and first-principles calculations, anomalous scattering spectral intensity from acoustic phonons was identified in the exemplary collinear antiferromagnetic nickel (II) oxide, unveiling strong spin-lattice correlations that renormalize the polarization of acoustic phonon. In particular, a clear magnetic scattering signature of the measured neutron scattering intensity from acoustic phonons is demonstrated by its momentum transfer and temperature dependences. The anomalous scattering intensity is successfully modeled with a modified magneto-vibrational scattering cross-section, suggesting the presence of spin precession driven by phonon. The renormalization of phonon eigenvector is indicated by the observed “geometry-forbidden” neutron scattering intensity from transverse acoustic phonon. Importantly, the eigenvector renormalization cannot be explained by magnetostriction but instead, it could result from the coupling between phonon and local magnetization of ions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

High-frequency phonons drive large phonon-drag thermopower in semiconductors at high carrier density

It has been well established that (i) the thermopower of semiconductors can be enhanced through a phe- nomenon known as the drag effect, and (ii) the drag enhancement involves only low-frequency acoustic phonons and benefits from low electron densities and low temperatures. Using first-principles calculations we show that large drag enhancements to the thermopower are possible at high carrier density even at room temperature and arise from high-frequency acoustic phonons. A fascinating example is cubic boron arsenide (BAs) for which the calculated room temperature drag enhancement of the thermopower exceeds an order of magnitude at a high hole density of 10 21 cm –3 . This remarkable behavior stems from the simultaneously weak phonon-phonon and phonon-hole scattering of the high-frequency phonons in BAs that become drag active at high carrier densities through electron-phonon interactions. Furthermore, this work advances our understanding of coupled electron-phonon nanoscale transport and introduces an unexpected paradigm for achieving large thermopowers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Simulating the Phonon Collection Efficiency in Kinetic Inductance Phonon-Mediated Detectors

Kinetic inductance phonon-mediated (KIPM) detectors use microwave kinetic inductance detectors (MKIDs) to read out phonon signals in the substrate. They are a promising class of detectors to be used in light dark matter (DM) searches due to their potential eV-scale sensitivity and native frequency-domain multiplexability. In order to improve upon the design of these detectors, simulations are needed to understand the effects of detector design on measurable physical parameters including the phonon collection efficiency, $\eta_{ph}$, which is defined as the ratio of phonon energy detected by the sensitive target element to the incident energy deposited in the substrate. This work simulates the phonon collection efficiency for two existing detector architectures to study phonon absorption at substrate-sensor interfaces and phonon loss to non-sensitive detector elements.

Dang, Stella Q.↗
DOE OSTI2025

Phonon Olympics: Phonon property and lattice thermal conductivity benchmarking from open-source packages

Three widely used open-source packages for determining phonon properties and lattice thermal conductivities (ALAMODE, phono3py, and ShengBTE) are benchmarked by teams of expert users and the package developers. The phonons for Ge, RbBr, monolayer MoSe 2 , and AlN are modeled at zero temperature, and they scatter through three-phonon and phonon-isotope processes, with thermal conductivities obtained from the linearized Peierls–Boltzmann transport equation with input from density functional theory calculations. Over a wide range of temperatures, the thermal conductivities calculated by the teams fall within at most ±15% of their mean values for each of the four materials. The phonon frequencies, obtained from the harmonic force constants, do not show large differences between the calculations, indicating that the modal heat capacities and group velocities are not responsible for the thermal conductivity variations. It is the lifetimes associated with three-phonon scattering, obtained from the cubic force constants, that drive the variations. The many decisions required to calculate the cubic force constants (e.g., supercell size, atomic displacement, neighbor cutoff, and application of symmetries) make identification of the precise origin of the thermal conductivity variations challenging. The calculated thermal conductivities do not generally show agreement with experimental measurements, which is attributed to the limitations of the density functional theory calculations. Guidance for the development of best practices is provided, which will help to standardize protocols needed for building thermal conductivity databases. The results provide a baseline for future benchmarking of other packages and more advanced calculations.

McGaughey, Alan J. H. [Carnegie Mellon Univ., Pitt↗
DOE OSTI2022

Connection between coherent phonons and electron-phonon coupling in Sb (111)

We report time- and angle-resolved photoemission spectroscopy (trARPES) measurements on the Sb(111) surface. We observe band- and momentum-dependent binding-energy oscillations in the bulk and surface bands driven by $A_{1g}$ and $E_{g}$ coherent phonons. While the bulk band shows simultaneous $A_{1g}$ and $E_{g}$ oscillations, the surface bands show either $A_{1g}$ or $E_{g}$ oscillations. The observed behavior is reproduced by frozen-phonon calculations based on density-functional theory. Furthermore, this evidences the connection between electron-phonon coupling and coherent binding energy dynamics tied to lattice vibration and confirms that band-, momentum-, and mode-dependent electron-phonon coupling can indeed be probed by trARPES in the low fluence limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Acoustic and optical phonon frequencies and acoustic phonon velocities in Si-doped AlN thin films

We report the results of the study of the acoustic and optical phonons in Si-doped AlN thin films grown by metal–organic chemical vapor deposition on sapphire substrates. The Brillouin–Mandelstam and Raman light scattering spectroscopies were used to measure the acoustic and optical phonon frequencies close to the Brillouin zone center. The optical phonon frequencies reveal non-monotonic changes, reflective of the variations in the thin film strain and dislocation densities with the addition of Si dopant atoms. The acoustic phonon velocity decreases monotonically with increasing Si dopant concentration, reducing by ∼300 m/s at the doping level of 3 × 1019 cm−3. The knowledge of the acoustic phonon velocities can be used for the optimization of the ultra-wide bandgap semiconductor heterostructures and for minimizing the thermal boundary resistance of high-power devices.

Physics↗
DOE OSTI2024

Imaginary phonon modes and phonon-mediated superconductivity in Y 2 C 3

For Y 2 C 3 with a superconducting critical temperature ($T_c$) ~18 K, zone-center imaginary optical phonon modes have been found for the high-symmetry I-43d structure due to C dimer wobbling motion and electronic instability from a flat band near Fermi energy. After lattice distortion to the more stable lowest-symmetry P1 structure, these stabilized low-energy phonon modes with a mixed C and Y character carry a strong electronphonon coupling to give rise to the observed sizable $T_c$. Our work shows that compounds with the calculated dynamical instability should not be simply excluded in the high-throughput search for new phonon-mediated superconductors. Moreover, we have studied the phase stability of the I-43d structure by calculating the enthalpy of different structural motifs of binary compounds containing group-IV elements at the 2:3 composition and also exploring the energy landscapes via ab initio molecular dynamics near and out of the I-43d structure. Here, our results show that the I-43d-type structures with C dimers are preferred in the low to medium pressure range. Because of the wobbling motion of the C dimers, there are many local energy minimums with degenerated energies. Thus, the ensemble average of many I-43d-distorted structures with C dimer wobbling motion at finite temperature still gives an overall I-43d structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Phonon modes and electron–phonon coupling at the FeSe/SrTiO 3 interface

The remarkable increase in superconducting transition temperature (T c ) observed at the interface of one-unit-cell FeSe films on SrTiO3 substrates (1 uc FeSe/STO) has attracted considerable research into the interface effects. Although this high T c is thought to be associated with electron-phonon coupling (EPC), the microscopic coupling mechanism and its role in the superconductivity remain elusive. Here we use momentum-selective high-resolution electron energy loss spectroscopy to atomically resolve the phonons at the FeSe/STO interface. We uncover new optical phonon modes, coupling strongly with electrons, in the energy range of 75-99 meV. These modes are characterized by out-of-plane vibrations of oxygen atoms in the interfacial double-TiO x layer and the apical oxygens in STO. Our results also demonstrate that the EPC strength and superconducting gap of 1 uc FeSe/STO are closely related to the interlayer spacing between FeSe and the TiOx terminated STO. These findings shed light on the microscopic origin of the interfacial EPC and provide insights into achieving large and consistent T c enhancement in FeSe/STO and potentially other superconducting systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Electron-phonon coupling strength from ab initio frozen-phonon approach

In this work, we propose a fast method for high-throughput screening of potential superconducting materials. The method is based on calculating metallic screening of zone-center phonon modes, which provides an accurate estimate for the electron-phonon coupling strength. This method is complementary to the recently proposed Rigid Muffin Tin (RMT) method, which amounts to integrating the electronphonon coupling over the entire Brillouin zone (as opposed to the zone center), but in a relatively inferior approximation. We illustrate the use of this method by applying it to MgB 2 , where the high-temperature superconductivity is known to be driven largely by the zone-center modes, and compare it to a sister compound AlB 2 . We further illustrate the usage of this descriptor by screening a large number of binary hydrides, for which accurate first-principle calculations of electron-phonon coupling have been recently published. Together with the RMT descriptor, this method opens a way to perform initial high-throughput screening in search of conventional superconductors via machine learning or data mining.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phonon Anharmonicity and Spin–Phonon Coupling in CrI 3

We report on the far-infrared, temperature-dependent optical properties of a CrI 3 transition metal halide single crystal, a van der Waals ferromagnet (FM) with a Curie temperature of 61 K. In addition to the expected phonon modes determined by the crystalline symmetry, the optical reflectance and transmittance spectra of CrI 3 single crystals show many other excitations as a function of temperature as a consequence of the combination of a strong lattice anharmonicity and spin–phonon coupling. This complex vibrational spectrum highlights the presence of entangled interactions among the different degrees of freedom in CrI 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Isotopic Constraints on the Nature of Primary Precipitates in Archean–Early Paleoproterozoic Iron Formations from Determinations of the Iron Phonon Density of States of Greenalite and 2L- and 6L-Ferrihydrite

Iron formations (IFs) are chemical sedimentary rocks that were widely deposited before the Great Oxidation Event (GOE) around 2.4- 2.2 Ga. It is generally thought that IFs precipitated as hydrated Fe 3+ oxides (HFOs) such as ferrihydrite following surface oxidation of Fe 2+ -rich, anoxic deep waters. This model often implicates biological oxidation and underpins reconstructions of marine nutrient concentrations. However, nanoscale petrography indicates that an Fe 2+ silicate, greenalite, is a common primary mineral in well-preserved IFs, motivating an alternative depositional model of anoxic ferrous silicate precipitation. It is unclear, however, if Fe 2+ -rich silicates can produce the Fe isotopic variations in IFs that are well explained by Fe 2+ oxidation. To address this question, we constrain the equilibrium Fe isotopic ( 56 Fe/ 54 Fe) fractionation of greenalite and ferrihydrite by determining the iron phonon densities of states for those minerals. Here, we use ab initio density functional theory (DFT + U) calculations and nuclear resonant inelastic X-ray scattering spectroscopy to show that ferrous greenalite should be isotopically lighter than ferrihydrite by similar to 1-1.2 parts per thousand at equilibrium, and fractionation should scale linearly with increasing Fe 3+ content in greenalite. By anchoring ferrihydrite-greenalite mineral pair fractionations to published experimental Fe isotopic fractionations between HFOs and aqueous Fe 2+ , we show that ferrous greenalite may produce all but the heaviest pre-GOE Fe isotopic compositions and mixed valence greenalites can produce the entire record. Our results suggest that heavy Fe isotope enrichments alone are not diagnostic of primary IF mineralogies, and ferrihydrite and partially oxidized or even purely ferrous greenalite are all viable primary IF mineralogies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phonon Dispersion Relations and Electron-Phonon Coupling in Iridium

This dataset comprises inelastic neutron scattering measurements of iridium conducted at SNS (ARCS, ITPS-30061) and HFIR (HB-3, TAX, IPTS-25194). ARCS data collected using 50 meV incident energy and include both signal and background files at various temperatures (100 K to 700 K). HB-3 (TAX) measurements span a temperature range from 100 K to 700 K and are organized by run numbers. Background contributions from the sample environment, such as shiver-induced noise, are included for completeness. The details of data description can be found in description.txt.

iridium, phonon, electron-phonon coupling↗