Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Linear permittivity tapering in a Cerenkov microwave source with a pre-bunched beam

Cerenkov microwave sources use a dielectric-lined waveguide to reduce the velocity of the electromagnetic wave and provide efficient energy transfer between the wave and the driving electron beam. Tapering the permittivity of the dielectric to maintain synchronism between the beam and the wave as the beam loses energy can increase the efficiency of these devices. Here, we consider such a structure driven by an electron beam with a harmonic density perturbation. Particle-In-Cell (PIC) simulations and a macro-particle model based on the slowly varying envelope approximation are first used to examine an un-tapered baseline case. PIC simulations of the source with linear tapers over the entire amplifier length as well as over only a section of the amplifier where the beam executes synchrotron oscillations are examined. The efficiency for the baseline un-tapered source is 18%, while efficiencies up to approximately 48% are found using a taper in dielectric permittivity. Results of the best performing cases are presented. Detailed examination of longitudinal phase space, particle energy distributions, evolution of longitudinal wavenumber, and phase dynamics are presented from the PIC simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Direct measurement of the static and transient magneto-optical permittivity of cobalt across the entire M -edge in reflection geometry by use of polarization scanning

The microscopic state of a magnetic material is characterized by its resonant magneto-optical response through the off-diagonal dielectric tensor component ε xy . However, the measurement of the full complex ε xy in the extreme ultraviolet spectral region covering the M absorption edges of 3d ferromagnets is challenging due to the need for either a careful polarization analysis, which is complicated by a lack of efficient polarization analyzers, or scanning the angle of incidence in fine steps. Here, we propose and demonstrate a technique to extract the complex resonant permittivity ε xy simply by scanning the polarization angle of linearly polarized high harmonics to measure the magneto-optical asymmetry in reflection geometry. Because this technique is more practical and faster to experimentally implement than previous approaches, we can directly measure the full time evolution of ε xy (t) during laser-induced demagnetization across the entire M 2,3 absorption edge of cobalt with femtosecond time resolution. We find that for polycrystalline Co films on an insulating substrate, the changes in ε xy are uniform throughout the spectrum, to within our experimental precision. This result suggests that, in the regime of strong demagnetization, the ultrafast demagnetization response is primarily dominated by magnon generation. Here, we estimate the contribution of exchange-splitting reduction to the ultrafast demagnetization process to be no more than 25%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge transportation and permittivity in electron beam irradiated polymethyl methacrylate

The charging phenomenon in the insulating dielectrics often occurs in the radiative environments such as in the outer space and in the nuclear reactor. Both surface charging and bulk charging have various influences on the dielectric properties. Understanding electrical properties of e-beam irradiated dielectrics is of great significance in order to maintain the stability and reliability of the related operating system. In this work, the effect of electron beam irradiation on the permittivity of polymethyl methacrylate (PMMA) samples was investigated. It was found that the variance of permittivity in e-beam irradiated PMMA is mainly determined by two factors. One is the porosity of the material. The irradiating process could increase the porosity of PMMA due to the escape of the small molecule (e.g., CO, CO{sub 2}, and CH{sub 4}) produced during material degradation caused by e-beam irradiation. The enhanced higher porosity corresponds to lower permittivity. The distribution of the implanted charge is the other factor that influences the permittivity. When the distribution of electric field generated by the accumulating charge is asymmetric for the middle thickness of the sample, the PMMA sample with polar groups would be subjected to extra polarization by the field, which could lead to the increase in permittivity. Combining with the model of Wakino et al. [J. Am. Ceram. Soc. 76, 2588 (1993)] on permittivity of mixture materials, the Clausius-Mosotti equation was utilized to analyze the variation in permittivity in the e-beam irradiated PMMA samples.

36 MATERIALS SCIENCE↗

Permittivity Threshold and Thermodynamics of Integer Charge-Transfer Complexation for an Organic Donor–Acceptor Pair

Molecular or chemical-based charge doping provides a means to change the properties (e.g. conductivity) of a material through a complete or partial transfer of charge between its constituents. Understanding how local material environment impacts this process is thus important for controlling the properties of organic materials. This paper presents spectroscopic investigations of molecular charge transfer interactions between a pair of common charge-doping and -transporting materials (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane, F4TCNQ, and N,N’-Diphenyl-N-N’-di-p-tolylbenzene-1,4-diamine, MPDA). Equilibrium constants associated with charge transfer were determined for donor-acceptor pairs dissolved in a series of solvents covering a range of values of permittivity. A threshold for highly favorable charge separation was observed to occur at a permittivity of ~8-9, with more and less favorable charge separation observed in solvents of higher and lower permittivity, respectively, but with chloroform (permittivity=4.81) exhibiting an anomalously favorable charge separation. Temperature-dependent studies were undertaken to assess the thermodynamics of charge separation. In 1,2- dichloroethane (permittivity=10.36) and chlorobenzene (permittivity=5.62), charge transfer was observed to be both enthalpically and entropically favorable. Charge separation in chloroform is exothermic and entropically disfavored, indicating that specific, inner-shell solvent-solute interactions stabilize the charge-separated complex and result in a net increase in local solution structure. Furthermore, our results provide insight on how modification to the chemical environment may be utilized to support stable charge transfer for molecular doping applications and requiring only modest changes in local permittivity.

36 MATERIALS SCIENCE↗

Multiscale modeling of packed-bed microwave reactors and estimation of intrinsic materials' permittivity

Modeling of packed-bed microwave reactors relies on an accurate representation of particle size, shape, and distribution within the bed, as well as the particles' dielectric properties. The measured permittivity of microwave susceptors (powders or structured materials) depends on the geometric features of the particles and the porosity of the bed, as well as the specific form factor of a structured material. These are effective properties and cannot be used to analyze other reactor configurations unless the geometric effects are removed. Therefore, we introduce a methodology for extracting the intrinsic particle permittivity from experimentally measured effective permittivity by combining cavity-based measurements with multiscale simulations and machine learning. Further, we develop the first multiscale model of packed-bed microwave reactors that incorporate particle effects (geometric features, random packing, and particle contact). This approach bridges macroscopic observables with mesoscopic physics, enabling analysis of local hotspots, arcing, and contact effects that control reactor performance. Using polymer-based spherical activated carbon (PBSAC) and silicon carbide (SiC) as examples, we demonstrate that the inferred particle permittivity is consistent with independent experimental heating profiles we collect from microwave reactors without adjustable parameters. Finally, this methodology establishes a foundation for predictive, multiscale design of microwave packed-bed reactors that explicitly accounts for particle-scale effects, enabling the estimation of intrinsic permittivity for the first time.

97 MATHEMATICS AND COMPUTING↗

Precision measurement of relative permittivity of aluminum oxide for a high power resonant waveguide window with low return loss

An iterative method of estimating permittivity and window thickness with high precision is developed for half wavelength resonant waveguide windows for use in a lower hybrid launcher for DIII-D. The high Q factor of half-wavelength windows results in extreme sensitivity of return loss on small deviations in permittivity. Permittivity and loss tangent measurements of Morgan AL-995 99.5% aluminum oxide ceramic using a waveguide resonant cavity per ASTM D2520-13 determine variation of permittivity with frequency. Measurement of window resonant frequency in conjunction with the slope of permittivity from waveguide cavity measurements determine required thickness of a resonant window within 5 MHz of the desired resonant frequency. Methods to improve measurement accuracy of resonant peaks on a vector network analyzer are discussed. A sensitivity study to dimensional variations in window or sample rod geometry, and shift in resonant frequency due to RF heating of the window material is conducted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Extraordinarily large permittivity modulation in zinc oxide for dynamic nanophotonics

The dielectric permittivity of a material encapsulates the essential physics of light-matter interaction into the material's local response to optical excitation. Photo-induced modulation of the permittivity can enable an unprecedented level of control over the phase, amplitude, and polarization of light. Therefore, the detailed dynamic characterization of technology-relevant materials with substantially tunable optical properties and fast response times is a crucial step to realize tunable optical devices. This work reports on the extraordinarily large permittivity changes in zinc oxide thin films (up to similar to 3.6 relative change in the real part of the dielectric permittivity at 1600 nm wavelength) induced by optically generated free carriers. We demonstrate broadband reflectance modulation up to 70% in metal-backed oxide mirrors at the telecommunication wavelengths, with picosecond-scale relaxation times. The epsilon near zero points of the films can be dynamically shifted from 8.5 mm to 1.6 mm by controlling the pump fluence. Additionally, the modulation can be selectively enhanced at specific wavelengths employing metal-backed zinc oxide disks while maintaining picosecond-scale switching times. This work provides insights into the free-carrier assisted permittivity modulation in zinc oxide and could enable the realization of novel dynamic devices for beam-steering, polarizers, and spatial light modulators.

36 MATERIALS SCIENCE↗

Ion Pairing and Redissociaton in Low-Permittivity Electrolytes for Multivalent Battery Applications

Detailed speciation of electrolytes as a function of chemical system and concentration provides the foundation for understanding bulk transport as well as possible decomposition mechanisms. In particular, multivalent electrolytes have shown a strong coupling between anodic stability and solvation structure. Furthermore, solvents that are found to exhibit reasonable stability against alkaline-earth metals generally exhibit low permittivity, which typically increases the complexity of the electrolyte species. To improve our understanding of ionic population and associated transport in these important classes of electrolytes, the speciation of Mg(TFSI)2 in monoglyme and diglyme systems is studied via a multiscale thermodynamic model using first-principles calculations for ion association and molecular dynamics simulations for dielectric properties. The results are then compared to Raman and dielectric relaxation spectroscopies, which independently confirm the modeling insights. We find that the significant presence of free ions in the low-permittivity glymes in the concentration range from 0.02 to 0.6 M is well-explained by the low-permittivity redissociation hypothesis. Here, salt speciation is largely dictated by long-range electrostatics, which includes permittivity increases due to polar contact ion pairs. The present results suggest that other low-permittivity multivalent electrolytes may also reach high conductivities as a result of redissociation.

25 ENERGY STORAGE↗

Percolative NiO decorated reduced-graphene oxide with a giant dielectric permittivity

Highlights: • NiO/r-GO composite exhibited a gaint dielectric permittivity of 3688 at 1 kHz. • NiO/r-GO composite is percolative w.r.t dielectric permittivity and conductivity. • Low threshold percolation is observed. • Increasing r-GO wt% decreased the interfacial resistance consistent with conductivity variation. - Abstract: NiO decorated reduced graphene oxide (r-GO) composites with varying r-GO weight percentages are synthesized using molecular level mixing technique. These composites are found to follow percolation theory with respect to dielectric behavior and conductivity values. A giant permittivity (ε′) value of 3688 was measured at 1 kHz when 2.4 wt% of r-GO was used in preparing NiO/r-GO composite. In comparison to NiO, enhanced permittivity values are recorded in the case of NiO/r-GO composites due to Maxwell-Wagner interfacial polarization between functionalized graphene sheets and NiO particles. It was also observed that ε′ values increased with decreasing NiO grain size up to the percolation threshold value. Moreover, ε′ values are found to be consistent with universal threshold values. Cole–Cole plots’ analysis revealed that the interfaces in the composites are more active than NiO grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitation and propagation of surface plasmon polaritons on a non-structured surface with a permittivity gradient

Accompanied by the rise of plasmonic materials beyond those based on noble metals and the development of advanced materials processing techniques, it is important to understand the plasmonic behavior of materials with large-scale inhomogeneity (such as gradient permittivity materials) because they cannot be modeled simply as scatterers. In this paper, we theoretically analyze the excitation and propagation of surface plasmon polaritons (SPPs) on a planar interface between a homogeneous dielectric and a material with a gradient of negative permittivity. We demonstrate the following: (i) free-space propagating waves and surface waves can be coupled by a gradient negative-permittivity material and (ii) the coupling can be enhanced if the material permittivity variation is suitably designed. This theory is then verified by numerical simulations. A direct application of this theory, ‘rainbow trapping’, is also proposed, considering a realistic design based on doped indium antimonide. This theory may lead to various applications, such as ultracompact spectroscopy and dynamically controllable generation of SPPs.

36 MATERIALS SCIENCE↗

Transition between positive and negative permittivity in field-dependent metamaterial

Permittivity in a metamaterial, which depends on the electric field of a propagating electromagnetic wave, induces anomalous responses against electromagnetic waves. When we consider discharge plasma an example of a metamaterial with field-dependent permittivity and negative permeability, a transition takes place between positive and negative permittivity, leading to reflection of waves in a low-field branch and transmission by the creation of a negative-refractive-index medium in a high-field branch. Nonlinearity in the phase space of the permittivity and the electric field in this system trigger this dynamic transition, which is suggested in the numerical results and clarified in an analytical model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large electrical manipulation of permittivity in BaTiO{sub 3} and Pb(Zr,Ti)O{sub 3} bimorph heterostructure

We report a strain-mediated electric field manipulation of permittivity in BaTiO{sub 3} (barium titanate, BT) ceramic by a Pb(Zr,Ti)O{sub 3} (PZT) bimorph. This BT/PZT heterostructure exhibited a relatively large permittivity tunability of BT up to ±10% in a wide frequency range under an electric field of ±4 kV/cm applied to the PZT bimorph. The permittivity tunability is attributed to the strain in BT produced by the PZT bimorph. Calculations of the relationship between permittivity and applied electric field were developed, and corresponded well with measurements. The BT/PZT heterostructure has potential for applications in broadband field tunable smart electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of a microwave capacitive method for the spectroscopy of the complex permittivity

We describe a vector network analyzer-based method to study the electromagnetic properties of nanoscale dielectrics at microwave frequencies (1 MHz–40 GHz). The complex permittivity spectrum of a given dielectric can be determined by placing it in a capacitor accessed on its both electrodes by coplanar waveguides. However, inherent propagation delays along the signal paths together with frequency-dependent effective surface of the capacitor at microwave frequencies can lead to significant distortion in the measured permittivity, which in turn can give rise to artificial frequency variations of the complex permittivity. We detail a fully analytical rigorous correction sequence with neither recourse to extrinsic loss mechanisms nor to arbitrary parasitic signal paths. We illustrate our method on 3 emblematic dielectrics: ferroelectric morphotropic lead zirconate titanate, its paraelectric pyrochlore counterpart, and strontium titanate. Permittivity spectra taken at various points along the hysteresis loop help shedding light onto the nature of the different dielectric energy loss mechanisms. Thanks to the analytical character of our method, we can discuss routes to extend it to higher frequencies and we can identify unambiguously the sources of potential artifacts.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Why Dissolving Salt in Water Decreases Its Dielectric Permittivity

The dielectric permittivity of salt water decreases on dissolving more salt. For nearly a century, this phenomenon has been explained by invoking saturation in the dielectric response of the solvent water molecules. Herein, we employ an advanced deep neural network (DNN), built using data from density functional theory, to study the dielectric permittivity of sodium chloride solutions. Notably, the decrease in the dielectric permittivity as a function of concentration, computed using the DNN approach, agrees well with experiments. Detailed analysis of the computations reveals that the dominant effect, caused by the intrusion of ionic hydration shells into the solvent hydrogen-bond network, is the disruption of dipolar correlations among water molecules. Accordingly, the observed decrease in the dielectric permittivity is mostly due to increasing suppression of the collective response of solvent waters.

74 ATOMIC AND MOLECULAR PHYSICS↗