Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oscillator strengths”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Observationally determined Fe II oscillator strengths

Absorption oscillator strengths for 21 Fe II resonance lines, have been determined using a curve-of-growth analysis of interstellar data from the Copernicus and International Ultraviolet Explorer (IUE) satellites. In addition to slight changes in strengths of the far-UV lines, new f-values are reported for wavelength 1608.45, a prominent line in interstellar and quasar absorption spectra, and for wavelength 2260.08, a weak, newly identified linen in IUE interstellar spectra. An upper limit on the strength of the undetected line at 2366.867 A (UV multiplet 2) is set. Using revised oscillator strengths, Fe II column densities toward 13 OB stars are derived. The interstellar depletions, (Fe/H), relative to solar values range between factors of 10 and 120.

Van Steenberg, M.↗

H sub 2 Lyman-band oscillator strengths.

Absorption oscillator strengths for rotational lines in Lyman transition vibrational bands of molecular hydrogen from equivalent widths measured photoelectrically

Brooks, N. H.↗

Observationally determined silicon II oscillator strengths

Si II oscillator strengths for eight resonance lines from the ground state have been determined using a curve-of-growth analysis of interstellar data from the Copernicus and International Ultraviolet Explorer satellites. The oscillator strengths for 1526 A and 1808 A increase by factors of 3.0 and 1.5, respectively, from previously tabulated values; those for 989 A and 1020 A decrease by factors of 0.55 and 0.60, respectively. These new values result in better silicon abundances for interstellar clouds and resolve a long-standing puzzle in the interpretation of quasar absorption line data.

Shull, J. M.↗

Oscillator strengths and collision strengths for neutral sulfur

Configuration-interaction target wave functions are used in the present calculation of collision strengths, for electron impact excitation of neutral sulfur from the group 3p4 3P state to excited states 3p3 4s 3S0, 3p3(4S0)3d 3D0, and 3p3 4s 3P0, in a close coupling approximation for the energy range up to 1,000,000 K. Configuration-interaction target wave functions are used in the calculation of collision strengths, and oscillator strengths for various triplet transitions are reported together with transitions between 3p4 1D and 3p4 1S and other singlet-excited states.

Ho, Y. K.↗

Oscillator strengths for OII ions

Oscillator strengths between various doublet states of OII ions are calculated in which extensive multi-configuration wave functions are used. The lower levels for the transitions are of the 2p(3) D(2)o and 2p(3) 2po states, and the upper levels are 2p(4), 3s, and 3d states. The results, which are estimated to have errors of less than 10% for individual transitions, agree quite well with the beam foil experiments, as well as with the calculations by use of the non-closed shell many electron theory (NCMET). The agreement with the rocket measurements is also good except for the 538/581 A pair, in which the 538 A line is believed to be blend with the other stronger quartet line. However, a comparison with the recent branching ratio measurement indicates that discrepances between the present calculation and th experiment do exist for certain transistions.

Ho, Y. K.↗

Laboratory astrophysics under the ultraviolet, visible, and gravitational astrophysics research program: Oscillator strengths for ultraviolet atomic transitions

The conditions within astrophysical environments can be derived from observational data on atomic and molecular lines. For instance, the density and temperature of the gas are obtained from relative populations among energy levels. Information on populations comes about only when the correspondence between line strength and abundance is well determined. The conversion from line strength to abundance involves knowledge of meanlives and oscillator strengths. For many ultraviolet atomic transitions, unfortunately, the necessary data are either relatively imprecise or not available. Because of the need for more and better atomic oscillator strengths, our program was initiated. Through beam-foil spectroscopy, meanlives of ultraviolet atomic transitions are studied. In this technique, a nearly isotopically pure ion beam of the desired element is accelerated. The beam passes through a thin carbon foil (2 mg/cu cm), where neutralization, ionization, and excitation take place. The dominant process depends on the energy of the beam. Upon exiting the foil, the decay of excited states is monitored via single-photon-counting techniques. The resulting decay curve yields a meanlife. The oscillator strength is easily obtained from the meanlife when no other decay channels are presented. When other channels are present, additional measurements or theoretical calculations are performed in order to extract an oscillator strength. During the past year, three atomic systems have been studied experimentally and/or theoretically; they are Ar, I, Cl I, and N II. The results for the first two are important for studies of interstellar space, while the work on N II bears on processes occurring in planetary atmospheres.

Federman, Steven R.↗

Oscillator strengths for Si II

New accurate results are presented for absorption oscillator strengths of Si II resonance lines. In these ab initio calculations, an extensive basis set of 67 electronic configuration are employed, including fine-structure states and relativistic effects in the Breit-Pauli approximation. For the strong Si II lines, good agreement is found with previous LS-coupling f-values of Dufton et al. (1983). Oscillator strengths of selected weaker lines disagree in some cases with empirically determined f-values by Shull, Snow, and York (1981) and by Van Buren (1986). The theoretical results are combined with curve-of-growth analyses of Copernicus and IUE data to yield a list of recommended Si II oscillator strengths consistent with the errors in both theoretical and observational analyses. These f-values have been used (Van Steenberg and Shull) for a Galactic survey of interstellar silicon abundances with the International Ultraviolet Explorer satellite.

Luo, Ding↗

Relative Band Oscillator Strengths for Carbon Monoxide: Alpha (1)Pi-Chi (1)Sigma(+) Transitions

Band oscillator strengths for CO transitions between the electronic states A (l)Pi and X(1)Sigma(+) were measured via absorption with a synchrotron radiation source. When referenced to the well-characterized (5,0) band oscillator strength, our relative values for the (7,0) to (11,0) bands are most consistent with the recent experiments of Chan et al. and the theoretical predictions of Kirby & Cooper. Since the results from various laboratory techniques and theory now agree, analyses of interstellar CO based on absorption from A-X bands are no longer hindered by uncertainties in oscillator strength.

Federman, S. R.↗

Oscillator strengths for O(II) ions

Oscillator strengths between various doublet states of OII ions are calculated in which extensive multi-configuration wave functions are used. The lower levels for the transitions are of the 2p(3) D(2)o and 2p(3) 2po states, and the upper levels are 2p(4), 3s, and 3d states. The results, which are estimated to have errors of less than 10 percent for individual transitions, agree quite well with the beam foil experiments, as well as with the calculations by use of the non-closed shell many-electron theory (NCMET). The agreement with the rocket measurements is also good except for the 538/581 A pair, in which the 538 A line is believed to blend with the other stronger quartet line. However, a comparison with the recent branching ratio measurement indicates that discrepancies between the present calculation and the experiment do exist for certain transitions.

Ho, Y. K.↗

New Accurate Oscillator Strengths and Electron Excitation Collision Strengths for N1

The nonorthogonal orbitals technique in a multiconfiguration Hartree-Fock approach is used to calculate oscillator strengths and transition probabilities of N(I) lines. The relativistic effects are allowed by means of Breit-Pauli operators. The length and velocity forms of oscillator strengths show good agreement for most transitions. The B-spline R-matrix with pseudostates approach has been used to calculate electron excitation collision strengths and rates. The nonorthogonal orbitals are used for an accurate description of both target wave functions and the R-matrix basis functions. The 24 spectroscopic bound and autoionizing states together with 15 pseudostates are included in the close-coupling expansion. The collision strengths for transitions between fine-structure levels are calculated by transforming the LS-coupled K-matrices to K-matrices in an intermediate coupling scheme. Thermally averaged collision strengths have been determined by integrating collision strength over a Maxwellian distribution of electron energies over a temperature range suitable for the modeling of astrophysical plasmas. The oscillator strengths and thermally averaged collision strengths are presented for transitions between the fine-structure levels of the 2s(sup 2)p(sup 3) (sup 4)S(sup 0), (sup 2)D(sup 0), (sup 2)P(sup 0), 2s2p(sup 4) (sup 4)P, 2s(sup 2)2p(sup 2)3s (sup 4)P, and (sup 2)P terms and from these levels to the levels of the 2s(sup 2)2p(sup 2)3p (sup 2)S(sup 0), (sup 4)D(sup 0), (sup 4)P(sup 0), (sup 4)S(sup 0), (sup 2)D(sup 0), (sup 2)P(sup 0),2s(sup 2)2p(sup 2)3s(sup 2)D, 2s(sup 2)2p(sup 2)4s(sup 4)P, (sup 2)P, 2s(sup 2)2p(sup 2)3d(sup 2)P, (sup 4)F,(sup 2)F,(sup 4)P, (sup 4)D, and (sup 2)D terms. Thermally averaged collision strengths are tabulated over a temperature range from 500 to 50,000 K.

Tayal, S. S.↗

Oscillator strengths for the X/1 Sigma+/ - A/1 Pi/ system of CH+.

Oscillator strengths for the X/1 Sigma+/ - A/1 Pi/ system of CH+ computed to an estimated accuracy of 10 percent from ab initio wave functions are presented. These oscillator strength values are given for the two strongest interstellar lines of 4232 and 3957 A.

Yoshimine, M.↗

Atomic Physics with the Goddard High-Resolution Spectrograph on the Hubble Space Telescope: Oscillator Strengths for Neutral Sulfur - No. 1

Interstellar spectra toward zeta Oph acquired with the Goddard High-Resolution Spectrograph were used to obtain oscillator strengths for approximately two dozen S I lines. This analysis was possible because precisely determined experimental oscillator strengths are available for several multiplets, including one with a weak interstellar line. The self-consistent set of oscillator strengths then was obtained from a curve of growth based on line strengths spanning a range of a factor of 100. The derived f-values for a number of multiplets differ from values quoted by Morton (1991) but are generally consistent with the suite of available experimental and theoretical results.

Federman, S. R.↗

Some O I oscillator strengths and the interstellar abundance of oxygen

Calculated and experimental oscillator strengths for the O I intersystem line at 1356 A and for other O I lines of interest in interstellar absorption-line studies are discussed. Attention is given to experimental f-values for the lines at 1302, 1305, and 1306 A, previous work on the f-values for the lines at 1356 and 1359 A, wave-function expansion, and calculations for permitted as well as intercombination lines. Copernicus observations of several interstellar absorption lines due to O I, C II, P II, and Ni II toward Zeta Oph are reported, equivalent widths are determined, and a curve-of-growth analysis is performed for the O I absorption lines. Oscillator strengths are recommended for the far-UV resonance lines of O I, and it is concluded that the oxygen in the interstellar H I regions toward Zeta Oph is depleted by 45% to 69%.

Zeippen, C. J.↗

Oscillator strengths for visible and ultraviolet observations of interstellar molecules

Optical observations of molecules in diffuse interstellar clouds are discussed. The role of oscillator strengths in determining cloud properties such as densities, temperatures, and particle and photon fluxes is examined. The use of an emission technique, molecular and atomic lifetime measurements, and absorption measurements to estimate oscillator strengths is described. It is noted that the lifetime and absorption measurements are more advantageous than the emission technique to estimate oscillator strengths.

Smith, Peter L.↗

Measurements of oscillator strengths for EUV emissions of ionized oxygen, nitrogen and sulfur

Oscillator-strength determinations for EUV branching emissions of atomic oxygen, nitrogen and sulfur are reported. The transitions studied were excited using a beam-foil source and both branching ratios and radiative lifetimes were determined. Calculated transition-probability data for multiply-ionized neon and oxygen emissions were used to obtain an in situ relative sensitivity curve for the EUV detection system used. New oscillator strengths for NII, OII, SII, and SIII EUV branching emissions that terminate on metastable states of the respective ions are reported, together with new lifetime data for ionized sulfur emissions.

Ryan, L. J.↗