Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Operando XRD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

In-Operando XRD Study of the Effects of Water Vapor on Phase Formation in LSM/YSZ SOFC Cathodes

Here, in-operando XRD was conducted on anode supported SOFC button cells with LSM-YSZ cathodes operated at varying cathode air compositions under constant current conditions for over 1000 h. 1-hour XRD scans were continuously collected throughout the entire operation duration. By taking the sum of measured intensities from all of the collected patterns, the resulting cumulative XRD count times allowed the identification of minor phases present at concentrations as low as <0.1 wt%. In dry air with no contaminants, the cathode exhibited improving power output during the first couple of hundred hours, followed by stable operation. The effect of 3% H 2 O + 12% CO 2 on the LSM-YSZ cathode was very similar to the effect of 3% H 2 O alone, exhibiting performance degradation. Increasing contaminants in the cathode air were found to decrease the performance of the cells. In-operando XRD discovered an increase in MnO concentration and decrease in La 2 O 3 . A gradual expansion of the LSM lattice resulting from loss of Sr or O was discovered in the LSM/YSZ cathodes tested in humid cathode air. The inverse relationship between the unit cell volume and operating voltage suggests a possible correlation between Sr segregation and performance degradation in the LSM/YSZ cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Probing Sources of Capacity Fade in LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622): An Operando XRD Study of Li/NMC622 Batteries during Extended Cycling

LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) is one of the most promising Li-ion battery cathodes as it delivers high capacity at high potentials. However high potentials also lead to decreases in capacity retention where the disintegration of the secondary particles has been implicated as a major driving force of this capacity fade. This has been attributed to anisotropic lattice changes and increased microstrain during cycling. To probe how these factors affect capacity fade, Li/NMC622 batteries were cycled from 3-4.3 or 4.7 V and probed with operando X-ray diffraction over the 1st, 2nd, and 101st cycles. Further characterization with scanning electron microscopy, and inductively coupled plasmaoptical emission spectroscopy was also performed. The use of operando XRD over many cycles allowed for the collection of detailed structural information in real time over a time frame in which fading can be observed. During the first two cycles, the cells charged to 4.7 V exhibit increased anisotropic lattice changes as compared to the cells charged to 4.3 V. Upon the 101st cycle, when significant fade has been observed, the cells charged to 4.3 and 4.7 V show identical lattice changes to one another, while the 4.7 V charge limit induces more microstrain. This shows that elevated microstrain at high charge limits is a major driver for particle disintegration in NMC622 cathodes. This study provides important insights into the mechanisms of particle disintegration and capacity fade in NMC/Li-ion batteries, which will enable the design of NMC electrodes that deliver both higher capacities and exhibit better capacity retention.

25 ENERGY STORAGE↗
DOE OSTI2024

Improved cycle stability and high-rate capability of LiNbO 3 -coated Li 3 VO 4 as anode material for lithium-ion battery

Lithium vanadate (Li 3 VO 4 ) has garnered considerable attention as an alternative negative electrode material for non-aqueous lithium-ion batteries due to its high capacity, energy efficiency, and stable discharge voltage. Nonetheless, the Li 3 VO 4 material displays a low rate capability, attributed mainly to its poor intrinsic electronic conductivity. Here, in this study, we report the synthesis of lithium niobate LiNbO 3 -coated Li 3 VO 4 (LVO@LNO) using a one-pot sol-gel method. The resulting LVO@LNO demonstrates a high reversible capacity of approximately 530 mAh/g, which is more than double that of free Li 3 VO 4 . To explore the effect of the LNO coating process on the morphological and structural properties, Raman, XRD, operando XRD, XPS, SEM and HTEM analyses were conducted. To explain the enhancement of electronic conductivity in our modified material after a LiNbO 3 coating, we conducted an Ex-Situ electrochemical impedance (EIS) and Density Functional Theory (DFT) computational study. Additionally, we designed a full cell utilizing a 1 wt% LNO-coated LVO anode and NMC-811 cathode. The cell yielded an output voltage of approximately 2.8 V with a high initial specific capacity of 350 mAh/g versus to the anode, at 1C with a capacity retention of 85 % after 100 cycles.

25 ENERGY STORAGE↗
DOE OSTI2023

Biopolymer‐assisted Synthesis of P‐doped TiO 2 Nanoparticles for High‐performance Lithium‐ion Batteries: A Comprehensive Study

Abstract TiO 2 material has gained significant attention for large‐scale energy storage due to its abundant, low‐cost, and environmentally friendly properties, as well as the availability of various nanostructures. Phosphorus doping has been established as an effective technique for improving electronic conductivity and managing the slow ionic diffusion kinetics of TiO 2 . In this study, non‐doped and phosphorus doped TiO 2 materials were synthesized using sodium alginate biopolymer as chelating agent. The prepared materials were evaluated as anode materials for lithium‐ion batteries (LIBs). The electrodes exhibit remarkable electrochemical performance, including a high reversible capacity of 235 mAh g −1 at 0.1 C and excellent first coulombic efficiency of 99 %. An integrated approach, combining operando XRD and ex‐situ XAS, comprehensively investigates the relationship between phosphorus doping, material structure, and electrochemical performance, reinforced by analytical tools and first principles calculations. Furthermore, a full cell was designed using 2 %P‐doped TiO 2 anode and LiFePO 4 cathode. The output voltage was about 1.6 V with high initial specific capacity of 148 mAh g −1 , high rate‐capability of 120 mAh g −1 at 1 C, and high‐capacity retention of 96 % after 1000 cycles at 1 C.

El Halya, Nabil↗
DOE OSTI2021

New Insights into the High‐Performance Black Phosphorus Anode for Lithium‐Ion Batteries

Abstract Black phosphorus (BP) is a promising anode material in lithium‐ion batteries (LIBs) owing to its high electrical conductivity and capacity. However, the huge volume change of BP during cycling induces rapid capacity fading. In addition, the unclear electrochemical mechanism of BP hinders the development of rational designs and preparation of high‐performance BP‐based anodes. Here, a high‐performance nanostructured BP–graphite–carbon nanotubes composite (BP/G/CNTs) synthesized using ball‐milling method is reported. The BP/G/CNTs anode delivers a high initial capacity of 1375 mA h g −1 at 0.15 A g −1 and maintains 1031.7 mA h g −1 after 450 cycles. Excellent high‐rate performance is demonstrated with a capacity of 508.1 mA h g −1 after 3000 cycles at 2 A g −1 . Moreover, for the first time, direct evidence is provided experimentally to present the electrochemical mechanism of BP anodes with three‐step lithiation and delithiation using ex situ X‐ray diffraction (XRD), ex situ X‐ray absorption spectroscopy (XAS), ex situ X‐ray emission spectroscopy, operando XRD, and operando XAS, which reveal the formation of Li 3 P 7 , LiP, and Li 3 P. Furthermore, the study indicates an open‐circuit relaxation effect of the electrode with ex situ and operando XAS analyses.

Li, Minsi↗
DOE OSTI2022

Reduced Graphene Oxide Aerogels with Functionalization-Mediated Disordered Stacking for Sodium-Ion Batteries

Surface modified reduced graphene oxide (rGO) aerogels were synthesized using the hydrothermal method. Ethylene diamine (EDA) and α-cyclodextrin (CD) were used to functionalize the surface of the graphene oxide layers. The oxygen reduction and surface modification occurred in-situ during the hydrothermal self-assembly process. The chemical functionality and structure of the resulting ethylene diamine modified (rGO-EDA) and cyclodextrin modified (rGO-CD) aerogels as well as of the pristine unmodified rGO aerogel were studied using XPS, SEM, XRD, and SANS techniques. The overall surface composition showed a significant decrease in the oxygen content for all synthesized aerogels. The surface modified aerogels were characterized by a disordered stacking of the assembled rGO layers. The surface functionalities resulted in a broad distribution of the interlayer spacing and introduced structural heterogeneities. Such disordered structures can enable a better adsorption mechanism of the sodium ions. Coin cells based on the synthesized aerogels and sodium metal were assembled and tested at several charge and discharge rates. The correlation between the surface functionality of the rGO, the induced structural heterogeneities due to the disordered stacking, and the electrochemical performance of sodium-ion batteries were investigated. Operando XRD measurements were carried out during the battery cycling to investigate the adsorption or intercalation nature of the sodiation mechanism.

25 ENERGY STORAGE↗
DOE OSTI2022

Extreme fast charge aging: Effect of electrode loading and NMC composition on inhomogeneous degradation in graphite bulk and electrode/electrolyte interface

Empowering extreme fast charging (XFC) requires a comprehensive understanding of its application with advanced anode and cathode materials in lithium-ion batteries. No report exists for the full extent of limitations for the anode with crosstalk effect from paired cathode as well as Li plating due to electrode loading under XFC. In this study, a combination of cell testing and multiple length characterization is used to investigate XFC aging mechanism in cells with a low loading of 1.5 mAh cm -2 and high loading of 2.5 mAh cm -2 for graphite (Gr)/Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMCs). Operando XRD mappings show 1.5 mAh cm -2 loadings result in higher strain in graphite for all three cathode types. Among the three NMC cathodes, the graphite from NMC532 and NMC811 cells show comparable strain. Scanning electron microscopy (SEM) images show distinct differences between 6-C-charged anodes in two loadings. Significantly increased electrode thickness can be seen due to more damage in the graphite bulk and accumulation of the electrolyte decomposition products in electrode pores. X-ray photoelectron spectroscopy (XPS) reveals both cathode chemistry and Li plating influence the non-uniform SEI composition on graphite surface. We report higher Ni content in NMC811 promotes the higher levels of salt decomposition on the SEI and formation of higher mass of electrolyte aging products.

25 ENERGY STORAGE↗
DOE OSTI2023

Degradation in Ni-Rich LiNi 1– x – y Mn x Co y O 2 /Graphite Batteries: Impact of Charge Voltage and Ni Content

Ni-rich LiNi 1– x–y Mn x CoyO 2 (NMC) materials are attractive as cathodes for Li-ion batteries due to their high energy density and low Co content. However, these materials may display poor electrochemical reversibility relating to structural and interfacial instabilities. The influence of Ni content and level of delithiation during charge on degradation mechanisms and relevance to electrochemical cycling behavior are probed for LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode materials in a full cell configuration under two upper voltage limits (4.1 and 4.3 V). The combined use of dQ/dV analysis of electrochemical voltage profiles, operando XRD, and postcycling scanning electron microscopy (SEM) measurements indicates that a major contributor to capacity fade is the large anisotropic volume change from an H2 $\leftrightarrows$ H3 phase transition and associated mechanical degradation particularly for NMC811. Notably, transition metal dissolution and deposition on the negative electrode are found to correlate with the structural changes occurring in the cathode under high voltage charge. X-ray photoelectron spectroscopy (XPS) analyses of the cycled cathodes reveal a more organic-rich cathode–electrolyte interphase (CEI) when cycling to 4.3 V with lower relative amounts of LiF. Surface reconstruction is not a significant factor under these cycling conditions as determined by soft X-ray absorption spectroscopy (sXAS) analysis. The results emphasize the opportunity to match the electrochemical test parameters with the specific NMC active material to mitigate degradation and extend cycle life.

36 MATERIALS SCIENCE↗
DOE OSTI2023

P2-Type Moisture-Stable and High-Voltage-Tolerable Cathodes for High-Energy and Long-Life Sodium-Ion Batteries

P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 represents a promising cathode for Na-ion batteries, but it suffers from severe structural degradation upon storing in a humid atmosphere and cycling at a high cutoff voltage. Here we propose an in situ construction to achieve simultaneous material synthesis and Mg/Sn cosubstitution of Na 0.67 Ni 0.33 Mn 0.67 O 2 via one-pot solid-state sintering. Here, the materials exhibit superior structural reversibility and moisture insensitivity. In-operando XRD reveals an essential correlation between cycling stability and phase reversibility, whereas Mg substitution suppressed the P2–O2 phase transition by forming a new Z phase, and Mg/Sn cosubstitution enhanced the P2–Z transition reversibility benefiting from strong Sn–O bonds. DFT calculations disclosed high chemical tolerance to moisture, as the adsorption energy to H 2 O was lower than that of the pure Na 0.67 Ni 0.33 Mn 0.67 O 2 . A representative Na 0.67 Ni 0.23 Mg 0.1 Mn 0.65 Sn 0.02 O 2 cathode exhibits high reversible capacities of 123 mAh g –1 (10 mA g –1 ), 110 mAh g –1 (200 mA g –1 ), and 100 mAh g –1 (500 mA g –1 ) and a high capacity retention of 80% (500 mA g –1 , 500 cycles).

25 ENERGY STORAGE↗
DOE OSTI2021

In Situ Probing Potassium-ion Intercalation-induced Amorphization in Crystalline Iron Phosphate Cathode Materials

Na-ion and K-ion batteries are promising alternatives for large-scale energy storage applications due to their abundance and low cost. Intercalation of these large ions could cause irreversible structural deformation and partial to complete amorphization in the crystalline electrodes. The designing of new amorphous electrodes is another route to develop electrodes to store these ions reversibly. Lack of understanding of dynamic changes in the amorphous nanostructures during battery operation is the bottleneck for further developments. Here, we report the utilization of in situ digital image correlation and in-operando X-ray diffraction (XRD) techniques to probe dynamic changes in the amorphous phase of iron phosphate during potassium intercalation. In-operando XRD demonstrates amorphization in the electrode’s nanostructure during the first charge/discharge cycle. Additionally, the ex-situ high-resolution transmission electron microscopy further confirms the amorphization after potassium insertion. In situ strain analysis detects the reversible deformation associated with redox reactions in the amorphous phases. Our approach offers new insights on the mechanisms of ion intercalation in the amorphous nanostructures which are highly potent for development of next-generation batteries.

Ozdogru, Bertan↗
DOE OSTI2020

DFT simulation of the X-ray diffraction pattern of aluminum-ion-intercalated graphite used as the cathode material of the aluminum-ion battery

Many breakthroughs have been achieved in rechargeable aluminum-ion battery technologies in recent years. Most recently, operando X-ray diffraction (XRD) combined with density functional theory (DFT) calculations was reported to study the chloroaluminate anion (AlCl 4 -)-intercalated graphite cathode of the battery. However, there are quite a few discrepancies between the measured and simulated XRD patterns. This work is focused on the simulation of XRD patterns of graphite intercalation compounds (GICs) with DFT calculations. Our results reveal that both the geometry of AlCl 4 - in graphite and the gallery height of GICs are dependent on the intercalant density. At low intercalant density, the gallery height keeps constant, but at high intercalant densities, the gallery height is linearly related to the intercalant density. Our simulated XRD patterns are highly consistent with the measured operando XRD patterns. Not only do the angles of the peaks match very well, but also the relative intensities and the corresponding electrode capacities show reasonable agreement with the experimental results. The DFT simulation of the XRD pattern provides significant information on the stage index and the charge capacity of the GIC electrode.

25 ENERGY STORAGE↗
DOE OSTI2026

Operando X-Ray Diffraction During High Temperature Electrolysis

This work presents the design, development, and deployment of an operando X-ray diffraction (XRD) system for high-temperature electrolysis (HTE), enabling real-time characterization of solid oxide electrolysis cells (SOECs) under true operational conditions. The integration of an HTE test stand within a synchrotron radiation environment, mimicking the conditions of a laboratory setup, aims to enhance our understanding of the degradation processes affecting the performance and longevity of SOECs. Utilizing a custom furnace and a high precision motor stack assembly at the Stanford Synchrotron Radiation Lightsource (SSRL), the system revealed unparalleled insights into the structural evolution of SOEC components through various operational stages, including initial heat ramp, cell reduction, fuel ramp, and wet electrolysis. Initial results demonstrate the significant impact of the initial heating and cooling on secondary phase formation within the SOEC, highlighting the utility of operando XRD for developing more efficient and durable hydrogen production technologies.

08 HYDROGEN↗
DOE OSTI2026

BMINN: Learning chemical potentials and parameters from voltage data for multi-phase battery modeling

Free-energy landscapes and chemical potentials govern the dynamics of phase transitions, transport, and stability in functional materials, yet they remain experimentally inaccessible under realistic operating conditions. Here we introduce a Bayesian model-integrated neural network (BMINN) that embeds physics-based formulations of non-autonomous partial differential-algebraic equations into probabilistic learning. This approach reconstructs hidden thermodynamics directly from macroscopic current-voltage data, providing quantitative access to metastable states, staging transitions, and energy barriers without synchrotron probes. Demonstrated on lithium-graphite electrodes, BMINN recovers full Gibbs free-energy landscapes with fidelity validated against operando X-ray diffraction. The framework generalizes across dynamical regimes, enabling accurate voltage prediction, internal state estimation, and inference of governing parameters. Beyond batteries, BMINN exemplifies a broadly applicable strategy for learning missing physics in multiphase, non-equilibrium systems, offering a new pathway to uncover hidden thermodynamic functions across condensed matter and materials physics.

25 ENERGY STORAGE↗
DOE OSTI2025

Carbon mineralization pathways in interfacial adsorbed water nanofilms

Carbon mineralization in humidified carbon dioxide offers a promising route to mitigate anthropogenic emissions in a world stressed by water security. Despite its technological importance, our understanding of carbonation in water-poor environments lags, as traditional dissolution-precipitation pathways struggle to explain the adsorbed water nanofilm-mediated reactivity. Here, we utilize in operando X-ray diffraction (XRD) and advanced molecular simulations to investigate nanoconfined reactions driving forsterite carbonation, the magnesium-rich olivine. By examining magnesium ion dissolution and transport in atomistic simulations of the forsterite-water-carbon dioxide interface and comparing these with the in operando XRD activation energies, we identify both processes as rate-limiting at saturation. Our simulations reveal a mechanistic view of interfacial carbonation, where dissolution and precipitation are mediated by anomalous quasi two-dimensional diffusion. The transport process involves intermittent diffusive hopping in the desorbed state, separated by crawling events that are spatially short but temporally long. This understanding transcends carbon mineralization, with implications for understanding the transport of contaminants in geosystems, the design of multifunctional materials, water desalination, and molecular recognition systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing the Atomic-Scale Structure of Amorphous Aluminum Oxide Grown by Atomic Layer Deposition

Atomic layer deposition (ALD) is a well-established technique for depositing nanoscale coatings with pristine control of film thickness and composition. The trimethylaluminum (TMA) and water (H 2 O) ALD chemistry is inarguably the most widely used and yet to date, we have little information about the atomic-scale structure of the amorphous aluminum oxide (AlO x ) formed by this chemistry. This lack of understanding hinders our ability to establish process-structure-property relationships and ultimately limits technological advancements employing AlOx made via ALD. In this work, we employ synchrotron high-energy X-ray diffraction (HE-XRD) coupled with pair distribution function (PDF) analysis to characterize the atomic structure of amorphous AlO x ALD coatings. We combine ex situ and in operando HE-XRD measurements on ALD AlO x and fit these experimental data using stochastic structural modeling to reveal variations in the Al-O bond length, Al and O coordination environment, and extent of Al vacancies as a function of growth conditions. In particular, the local atomic structure of ALD AlO x is found to change with the substrate and number of ALD cycles. The observed trends are consistent with the formation of bulk Al 2 O 3 surrounded by an O-rich surface layer. We deconvolute these data to reveal atomic-scale structural information for both the bulk and surface phases. Overall, this work demonstrates the usefulness of HE-XRD and PDF analysis in improving our understanding of the structure of amorphous ALD thin films and provides a pathway to evaluate how process changes impact the structure and properties of ALD films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

X-ray Diffraction Studies of Single-Crystal Materials for Broad Battery Applications

Single-crystal materials have attracted growing interest in battery research due to their well-defined crystallographic orientation, absence of grain boundaries, and enhanced mechanical and electrochemical stability. This Review provides a comprehensive overview of recent advances in the synthesis, structural evolution, and performance optimization of single-crystal electrodes and solid electrolytes. Particular focus is placed on the application of advanced X-ray diffraction (XRD) techniques, including operando synchrotron diffraction, reciprocal space mapping, and Bragg coherent diffraction imaging, which have enabled in-depth investigations of lattice strain, cation disorder, phase transitions, and defect formation. Representative case studies across Ni-rich layered oxides, spinel-type cathodes, and garnet-based electrolytes are examined to highlight the structural features unique to single crystals. Additionally, the synergistic integration of XRD with machine learning, tomography, and spectroscopy is discussed as a powerful direction for real-time analysis and predictive modeling. Furthermore, these insights provide critical guidance for the rational design of high-performance single-crystal materials in lithium, sodium, and solid-state battery systems.

25 ENERGY STORAGE↗