SEARCH · Engineering Papers
Results for “OVERBURDEN”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Muon Borehole Detector Design for Use in 4-D Density Overburden Monitoring
The increase of atmospheric CO2 concentrations has initiated research into carbon sequestration methods. One possibility is to store CO2 in subsurface porous reservoirs. The monitoring of the injected CO2 plume is vital because escaping CO2 poses health and environmental risks. Typically, seismic reflection methods are used to determine the change in density due to the replacement of brine by CO2 in the reservoir, but this is expensive and not continuous. A potential alternative is to use cosmic muon tomography to measure density changes in the reservoir as a function of time. This paper describes the development of a muon detector that will be capable of being deployed in boreholes. The detector has the required dimensions, an angular resolution of approximately 2 degrees, and is robust. The design is based on alternating layers of scintillating rods, which can provide 4-D tomographic data to detect small changes in density at depths up to approximately 2 km. Geant4, a Monte Carlo simulation code, is being used to develop models to guide the design of the physical configuration. Preliminary testing and measurements have been performed to validate the simulation predictions and optimize the performance of the system. The simulation and preliminary experimental results are presented here.
In-Situ Approach to Sampling and Survey for Radiological Contaminants to Release Overburden Soil for Reuse - 20120
Various methods may be utilized to determine if overburden soil meets approved release criteria to allow for reuse of overburden soil as backfill material: soil scanning and sorting equipment, survey and sampling of excavated soil, in-situ sampling, and utilization of box or truck counters are common approaches. This paper focuses on a modified approach using elements of in-situ sampling and after excavation survey for a large volume of overburden soil that was expected to meet soil release criteria. This approach was utilized for the U.S. Army Corps of Engineers (USACE) St. Louis District at a North St. Louis County property. (authors)
Design and simulation of a muon detector to characterize geological overburden
This study presents the design, construction, and simulation of a mobile muon detector tailored for geological overburden characterization. The detector employs plastic scintillator paddles with silicon photomultipliers (SiPMs) and a QuarkNet data acquisition system, offering a portable solution suitable for remote field deployment. The simulator’s modular aluminum frame allows for adjustable geometry and directional sensitivity, while its battery system supports over a week of autonomous operation. Preliminary experimental tests confirmed that its muon flux measurements were consistent with theoretical expectations. A comprehensive simulation framework using Geant4 and CORSIKA was developed to model detector response and overburden effects. Analytical and Monte Carlo methods were used to assess quadrant resolution and infer muon directionality. This work lays the foundation for future overburden mapping and supports the development of reconstruction algorithms for geological applications.
Non-ferromagnetic overburden casing
Systems, methods, and heaters for treating a subsurface formation are described herein. At least one system for electrically insulating an overburden portion of a heater wellbore is described. The system may include a heater wellbore located in a subsurface formation and an electrically insulating casing located in the overburden portion of the heater wellbore. The casing may include at least one non-ferromagnetic material such that ferromagnetic effects are inhibited in the casing.
Remediation of mine overburden and contaminated water with activated biochar derived from low-value biowaste
Not Available
Surface Coal Mining – Overburden Removal, Extraction, and Reclamation
The Energy and non-combustion emissions for the operation of a surface coal mine. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=F690F334-2C4A-4C44-BB8C-1D7A080EC94B
Three-phase heaters with common overburden sections for heating subsurface formations
A heating system for a subsurface formation is described. The heating system includes three substantially u-shaped heaters with first end portions of the heaters being electrically coupled to a single, three-phase wye transformer and second end portions of the heaters being electrically coupled to each other and/or to ground. The three heaters may enter the formation through a first common wellbore and exit the formation through a second common wellbore so that the magnetic fields of the three heaters at least partially cancel out in the common wellbores.
Fast Neutron Backgrounds for Anti-neutrino based nuclear reactor monitoring a a funciton of overburden.
Abstract not provided.
Fast Neutron Backgrounds for Anti-Neutrino Based Nuclear Reactor Monitoring as a Function of Overburden.
Abstract not provided.
The Coupled Location/Depth/Yield Problem for North Korea’s Declared Nuclear Tests
On 3 September 2017, the Democratic People's Republic of Korea (DPRK) conducted its sixth and largest declared nuclear test at the Pung'gye Ri test site. Recently, we have been using regional waveform envelopes to estimate the explosive yield and overburden of chemical and nuclear explosions by coupling explosion source models to propagation parameters. Like most yield determination methods, there can be tradeoffs between yield and depth, leading to uncertainties in both parameters. The relative locations are well-constrained by small timing differences in seismic-phase arrivals at stations that recorded multiple events, but there are potential uncertainties on the absolute locations. Depths are poorly constrained by the relative arrival times. In this study, we have performed a coupled location and yield analysis of the DPRK nuclear tests. We use correlation methods to get highly accurate travel times and relative locations using a Bayesian location method. Then, while keeping the relative locations of the six tests constant, we consider the consequences of shifts to the absolute locations on the resulting overburden for each event. Given that overburden, we determine the yield that minimizes the waveform misfit. We also test and compare a number of explosion source models. By considering the coupled location/depth/yield problem, we reduce uncertainties in the absolute locations, and yield and depth estimates of the events. Based on statistical analysis, we estimate that the 2017 test has a yield of 125 kilotons (equivalent TNT) with a 1 sigma uncertainty range of 103-150 ktons at about 600 m of overburden.
Basin-scale analysis of Mokelumne River Formation for multi-well CO 2 injection
Large-scale carbon sequestration will likely require multiple projects injecting CO 2 into the same subsurface formation, raising concerns about safe operation and efficient use of storage capacity. This study evaluates the long-term response of the Mokelumne River Formation in California’s Sacramento Basin to multi-megaton CO 2 injection using three geologic models of the formation and the open-source simulator GEOS. The analysis focuses on three aspects of reservoir performance: (1) average pressure increase and dissolved CO 2 mass after 30 years for varying well counts and injection rates, (2) pressure interference in a multi-well configuration, and (3) dynamic storage capacity with identification of overpressure-prone regions. The results show that average formation pressure increases linearly with injected mass, while CO 2 dissolution exhibits mixed scaling: approximately linear with the number of wells but sublinear with injection rate, indicating that distributing injection across more wells enhances dissolution more effectively than increasing per-well rates. Pressure-interference effects are significant, with lower-permeability conditions delaying their onset but amplifying their magnitude at later times. Dynamic capacity, defined by the first occurrence of pressure exceeding the local overburden-based limit anywhere in the formation, varies across geologic models and assumed overburden pressure gradients. A lower fidelity geologic model predicts nearly twice the storage capacity of the two higher fidelity models, which consistently estimate approximately 1 Gt under the upper-bound overburden pressure gradient considered for the Sacramento Basin. In all model scenarios, overpressure develops away from injection wells, particularly in higher-elevation regions, highlighting the importance of basin-scale modelling for identifying risks beyond the immediate well vicinity.
Enhancing trap and fault seal analyses by integrating observations from HR3D seismic data with well logs and conventional 3D seismic data, Texas inner shelf
An understanding of trap and fault seal quality is critical for assessing hydrocarbon prospectivity. To achieve this, modern analytical techniques leverage well data and conventional industry-standard 3D seismic data to evaluate the trap, and any faults displacing the reservoir and top seal intervals. Above all, geological interpretation provides the framework of trap and fault seal analyses, but can be hindered by the data resolution, quality and acquisition style of the conventional seismic data. Furthermore, limiting the analysis to only the petroleum system at depth may lead to erroneous perceptions because interpreting overburden features, such as shallow faults or gas chimneys, can provide valuable observations with respect to container performance, and can to help validate trap and fault seal predictions. Here, a supplement to conventional 3D data are high-resolution 3D seismic (HR3D) data, which provide detailed images of the overburden geology. This study utilizes an HR3D seismic volume in the San Luis Pass area of the Texas inner shelf, where shallow fault tips and a sizeable gas chimney are interpreted over an unsuccessful hydrocarbon prospect. Static post-drill fault seal and trap analyses suggest that the primary fault displacing the structural closure could have withheld columns of gas c. 100 m high, but disagree with our HR3D seismic interpretations and dry-well analyses. From our results, we hypothesize that tertiary gas migration through fault conduits reduced the hydrocarbon column in the prospective Early Miocene reservoir, and may have resulted from continued movement along the intersecting faults. Overall, this study reinforces the importance of understanding the overburden geology and geohistory of faulted prospects, and demonstrates the utility of pre-drill HR3D acquisition when conducting trap and fault seal analyses.
Cosmic Shielding Studies at MicroBooNE
MicroBooNE, a 89 ton active volume liquid argon time projection chamber (LArTPC) located on the Fermilab’s Booster Neutrino Beamline, is designed to both probe neutrino physics phenomena, and further the development of LArTPC detector technology and event reconstruction. Since MicroBooNE is located only a few meters below the ground level, without significant shielding, a large flux of cosmic rays are expected to enter the detector volume. We present detailed simulation studies performed in order to quantify cosmogenic event rates in MicroBooNE. One of the most effective ways to reduce the cosmic air shower background is to use a high-density shielding material a few meters above the detector to block or attenuate the incoming cosmic particles. The effect of such an overburden on MicroBooNE backgrounds and event rates is explored and quantified using detailed simulation studies. In particular, the effect of a 3 m concrete overburden on these backgrounds is studied in detail. Special focus is given to cosmogenic electromagnetic showers that can fake an electron-like or photon-like event and pose a serious challenge to studies involving single $e/γ$ searches which form a primary physics goal of MicroBooNE. We find that the addition of a 3 m concrete overburden can help significantly reduce difficult-to-control backgrounds which arise from non-muon cosmic ray primaries.
Muon Radiography with the NOvA Near Detector
Information on the geological and man-made structures, directly contributing to the overburden of the NOvA Near Detector, located 100 m underground at Fermilab, are extracted from the cosmic muon data accumulated in the period April 2015 - October 2016. Results of this radiographic analysis of cosmic data are obtained by exploiting the acceptance symmetries of the NOvA detector. Radiographic maps of the overburden variations are acquired without subtracting the surface muon flux (free sky data) and without MC simulation of the cosmic muons attenuation in the homogeneous and flat overburden. By directly subtracting the angular muon track data measured by the NOvA Near Detector, arriving from directions having the same attenuation length (in the flat-surface approximation) and belonging to the acceptance regions with the same reconstruction efficiency, one can efficiently obtain two-dimensional differential radiographic maps.