Density Functional Theory Study of Oxygen-Atom Insertion into Metal-Methyl Bonds of Iron(II), Ruthenium(II), and Osmium(II) Complexes: Study of Metal-Mediated C-O Bond Formation
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Abstract The compression behavior of osmium metal was investigated up to 280 GPa (volume compression V/V o = 0.725) under nonhydrostatic conditions at ambient temperature using angle dispersive axial x-ray diffraction (A-XRD) with a diamond anvil cell (DAC). In addition, shear strength of osmium was measured to 170 GPa using radial x-ray diffraction (R-XRD) technique in DAC. Both diffraction techniques in DAC employed platinum as an internal pressure standard. Density functional theory (DFT) calculations were also performed, and the computed lattice parameters and volumes under compression are in good agreement with the experiments. DFT predicts a monotonous increase in axial ratio ( c/a ) with pressure and the structural anomalies of less than 1% in ( c/a ) ratio reported below 150 GPa were not reproduced in theoretical calculations and hydrostatic measurements. The measured value of shear strength of osmium ( τ ) approaches a limiting value of 6 GPa above a pressure of 50 GPa in contrast to theoretical predictions of 24 GPa and is likely due to imperfections in polycrystalline samples. DFT calculations also enable the studies of shear and tensile deformations. The theoretical ideal shear stress is found along the (001)[1–10] shear direction with the maximal shear stress ∼24 GPa at critical strain ∼0.13.
Size, shape, nuclearity: Aberration-corrected scanning transmission electron microscopy was used to determine the 3D structures of MgO-supported Os3, Os4, Os5, and Os10 clusters, which have structures nearly matching those of osmium carbonyl compounds with known crystal structures. The samples are among the best-defined supported catalysts.
We studied the most incompressible transition metal osmium (Os) under high pressure. There is significant interest in Os because of the structural anomalies attributed to topological transitions in the Fermi surface for valence electrons in the hexagonal close-packed phase. We report on measurements of structural parameters and equation of state on Os metal to a pressure of 207 GPa at ambient temperature using platinum as a pressure standard. We also obtained angle-dispersive X-ray diffraction data at a synchrotron source with closely spaced pressure intervals to observe any discontinuities or anomalies in the axial c/a ratio at high pressures. Rietveld refinements of X-ray diffraction data show a slowly varying axial ratio (c/a) with a broad minimum at 75 GPa. Our data do not provide any evidence of anomalous behavior in the c/a ratio in Os at 25 or 150 GPa as have been reported in previous studies. These experimental results are in agreement with theoretical calculations that do not predict any anomalous behavior in c/a ratio in Os under extreme conditions. We present an equation of state for Os to 207 GPa (V/V 0 = 0.761) at ambient temperature and compare our results with the previously published data.
Na{sub 2}OsO{sub 4} crystals were grown by a NaCl flux method under high pressure. It crystallizes in the Ca{sub 2}IrO{sub 4}-type structure without having additional elements or metal vacancies, which are usually accommodated. It appears that Na{sub 2}OsO{sub 4} is a metal-stoichiometric Ca{sub 2}IrO{sub 4}-type compound never been synthesized to date. Na{sub 2}OsO{sub 4} has the octahedral environment of Os{sup 6+}O{sub 6} so that the electronic configuration is 5d{sup 2}, suggesting the magnetic S=1 ground state. However, magnetization, electrical resistivity, and specific heat measurements indicated that the non-magnetic S=0 state is much likely for Na{sub 2}OsO{sub 4} than the S=1 state. Band structure calculations and the structure analysis found that the disagreement is probably due to the statically uniaxial compression of the OsO{sub 6} octahedra, resulting in splitting of the t{sub 2{sub g}} band. - Graphical abstract: Na{sub 2}OsO{sub 4} crystals were grown by a NaCl flux method under high pressure. It crystallizes in the Ca{sub 2}IrO{sub 4}-type structure comprising infinite Os{sup 6+}O{sub 6} octahedra (5d{sup 2}) chains. The crystal growth, the crystal structure, and the magnetic and electrical properties are reported.
Abstract not provided
High-pressure crystal growth and synthesis of selected solid-state osmium oxides, many of which are perovskite-related types, are briefly reviewed, and their magnetic and electrical properties are introduced. Crystals of the osmium oxides, including NaOsO{sub 3}, LiOsO{sub 3}, and Na{sub 2}OsO{sub 4}, were successfully grown under high-pressure and high-temperature conditions at 6 GPa in the presence of an appropriate amount of flux in a belt-type apparatus. The unexpected discovery of a magnetic metal–insulator transition in NaOsO{sub 3}, a ferroelectric-like transition in LiOsO{sub 3}, and high-temperature ferrimagnetism driven by a local structural distortion in Ca{sub 2}FeOsO{sub 6} may represent unique features of the osmium oxides. The high-pressure and high-temperature synthesis and crystal growth has played a central role in the development of solid-state osmium oxides and the elucidation of their magnetic and electronic properties toward possible use in multifunctional devices. - Graphical Abstract: Flux-grown crystals of NaOsO{sub 3} under high-pressure and high-temperature conditions in a belt-type apparatus. The crystal shows a magnetically driven metal–insulator transition at a temperature of 410 K. - Highlights: • Short review of high-pressure crystal growth of solid-state osmium oxides. • Wide variety of magnetic properties of solid-state osmium oxides. • Perovskite and related dense structures stabilized at 3–17 GPa.
MgO-supported osmium dioxo species, described as Os(=O) 2 {-Osupport} 1 or 2 (the brackets denote O atoms of the MgO surface), formed from Os 3 (CO) 12 via supported Os(CO) 2 , and characterized by spectroscopy, microscopy, and theory, react with ethylene at 298 K to form osmium glycol species or with CO to give osmium mono- and di-carbonyls. Os(=O) 2 {-Osupport} 1 or 2 is the precursor of a CO oxidation catalyst characterized by a turnover frequency of 4.0×10 -3 (molecules of CO)/(Os atom×s) at 473 K; the active species are inferred to be osmium monocarbonyls. The structures and frequencies calculated at the level of density functional theory with the B3LYP functional bolster the experimental results and facilitate structural assignments. The lowest-energy structures have various osmium oxidation and spin states. The results demonstrate not only new chemistry of the supported single-site catalysts but also their complexity and the value of complementary techniques used in concert to unravel the chemistry.
Samples coated with osmium were flown on the early Shuttle test flights, and on the return of these samples, the osmium coating was found to have disappeared, evidently due to the oxidation of the material in the atomic oxygen atmosphere. An instrument flown on the Spacelab 1 mission comprised an array of five spectrometers covering the extreme ultraviolet (EUV) to near-IR wavelengths. The EUV spectrometer contained an osmium-coated reflective grating located fairly deep within the instruments. Here, results of an assessment of the reflectivity and stability of the osmium surface over the course of the ten-day mission are reported. It is concluded that the osmium reflective coating remained stable relative to the spectrometer coated with MgF2 over the course of the mission. In addition, the ratio of sensitivity of these two spectrometers did not change in any major way from the time of the laboratory calibration until the time of flight two years later. Any changes are within the 50-percent calibration uncertainty.
Abstract The electronic transport of monolayer graphene devices is studied before and after in situ deposition of a sub‐monolayer coating of osmium adatoms. Unexpectedly, and unlike all other metallic adatoms studied to date, osmium adatoms shift the charge neutrality point to more positive gate voltages. This indicates that osmium adatoms act as electron acceptors and thus leave the graphene hole‐doped. Analysis of transport data suggest that Os adatoms behave as charged impurity scatterers, albeit with a surprisingly low charge‐doping efficiency. The charge neutrality point of graphene is found to vary non‐monotonically with gate voltage as the sample is warmed to room temperature, suggesting that osmium diffuses on the surface but is not completely removed.
We report the discovery of an n 2 -SO 2 linkage photoisomer in the osmium pentaammine coordination complex, [Os(NH 3 ) 5 (SO 2 )][Os(NH 3 ) 5 (SO 3 )]Cl 4 (1). Its dark and light-induced crystal structures are determined via synchrotron X-ray crystallography, at 100K, where the photo-induced state is metastable in a single crystal that has been stimulated by 505 nm light for 2.5 hrs. The SO 2 photoisomer in the [Os(NH 3 ) 5 (SO 2 )] 2+ cation contrasts starkly with the photo-inactivity of the SO 3 ligand in its companion [Os(NH 3 ) 5 (SO 3 )] 2+ cation within the crystallographic asymmetric unit of this single crystal. Panchromatic optical absorption characteristics of this single crystal are revealed in both dark and light-induced states, using concerted absorption spectroscopy and optical microscopy. Its optical absorption halves across most of its visible spectrum, upon exposure to 505nm light. The SO 2 ligand seems to be responsible for this photo-induced bleaching effect, judging from a comparison of the dark and light-induced crystal structures of 1. The SO 2 linkage photo-isomerism is found to be thermally reversible and so this complex presents a rare example of an osmium-based solid-state optical switch. Such switching in an osmium-based complex is significant be-cause bottom-row transition metals stand to offer linkage photo-isomerism with the greatest photo-conversion levels and thermal stability. Furthermore, the demonstration of n 2 -SO 2 bonding in this complex also represents a fundamental contribution to osmium coordination chemistry
Osmium is one of the most incompressible elemental metals, and is used as a matrix material for synthesis of ultrahard materials. To examine the behavior of osmium metal under extreme conditions of high pressure and temperature, we measured the thermal equation of state of osmium metal at pressures up to 50 GPa and temperatures up to 3000 K. X-ray diffraction measurements were conducted in the laser heated diamond anvil cell at GeoSoilEnviroCARS and the High Pressure at the Advanced Photon Source and beamline 12.2.2 at the advanced light source. Ambient temperature data give a zero pressure bulk modulus of 421 (3) GPa with a first pressure derivative fixed at 4. Fitting to a high temperature Birch-Murnaghan equation of state gives a room pressure thermal expansion of 1.51(0.06) x 10{sup -5} K{sup -1} with a first temperature derivative of 4.9(0.7) x 10{sup -9} K{sup -2} and the first temperature derivative of bulk modulus of be dK{sub 0}/dT = -0.055 (0.004). Fitting to a Mie-Grueneisen-Debye equation of state gives a Grueneisen parameter of 2.32 (0.08) with a q of 7.2 (1.4). A comparison of the high pressure, temperature behavior among Re, Pt, Os, shows that Os has the highest bulk modulus and lowest thermal expansion of the three, suggesting that Os-based ultrahard materials may be especially mechanically stable under extreme conditions.
Rhenium and osmium concentrations and the osmium isotopic compositions of iron meteorites were determined by negative thermal ionization mass spectrometry. Data for the IIA iron meteorites define an isochron with an uncertainty of approximately +/-31 million years for meteorites about 4500 million years old. Although an absolute rhenium-osmium closure age for this iron group cannot be as precisely constrained because of uncertainty in the decay constant of Re-187, an age of 4460 million years ago is the minimum permitted by combined uncertainties. These age constraints imply that the parent body of the IIAB magmatic irons melted and subsequently cooled within 100 million years after the formation of the oldest portions of chondrites. Other iron meteorites plot above the IIA isochron, indicating that the planetary bodies represented by these iron groups may have cooled significantly later than the parent body of the IIA irons.
The perovskite-type compounds containing both rare earth and osmium Ba{sub 2}LnOsO{sub 6} (Ln=Pr, Nd, Sm–Lu) have been prepared. Powder X-ray diffraction measurements and Rietveld analysis show that Ln{sup 3+} and Os{sup 5+} ions are structurally ordered at the M site of the perovskite BaMO{sub 3}. Magnetic susceptibility and specific heat measurements show that an antiferromagnetic ordering of Os{sup 5+} ions has been observed for Ba{sub 2}LnOsO{sub 6} (Ln=Pr, Nd, Sm, Eu, Gd, Lu) at 65–71 K. Magnetic ordering of Ln{sup 3+} moments occurs when the temperature is furthermore decreased. - Graphical abstract: The perovskite-type compounds containing both rare earth and osmium Ba{sub 2}LnOsO{sub 6} (Ln=Pr, Nd, Sm–Lu) have been prepared. An antiferromagnetic ordering of Os{sup 5+} ions has been observed for Ba{sub 2}LnOsO{sub 6} (Ln=Pr, Nd, Sm, Eu, Gd, Lu) at 65–71 K. Measurements and analysis of the specific heat for Ba{sub 2}PrOsO{sub 6} show that magnetic ordering of the Pr{sup 3+} moments should have occurred at ∼20 K. Display Omitted.
The spectrum of osmium was observed in the (225–2100) Å wavelength region. The (5d{sup 6} + 5d{sup 5}6s)− (5d{sup 5}6p + 5d{sup 4}6s6p) transition array of two times ionized osmium, Os III, has been investigated and 1039 spectral lines have been classified in the region. The analysis has led to the determination of the 5d{sup 6}, 5d{sup 5}6s, 5d{sup 5}6p and 5d{sup 4}6s6p configurations. Fifty-eight levels of the 5d{sup 6} and 5d{sup 5}6s configurations in the even system and 142 levels of the 5d{sup 5}6p and 5d{sup 4}6s6p configurations in the odd system have been established. The orthogonal operators technique was used to calculate the level structure and transition probabilities. The energy parameters have been determined by the least squares fit to the observed levels. Calculated transition probability and energy values, as well as LS-compositions obtained from the fitted parameters are presented.
A number of samples of optical thin film materials were flown on Shuttle flight STS-8 as part of an experiment to evaluate their interaction with residual atomic oxygen in low earth orbit. Osmium was selected because of its usefulness as a reflective optical coating for far-UV instruments and for confirmation of results from previous Shuttle flights in which such coatings disappeared. Reflectance data and photographic evidence are presented to support the hypothesis that the osmium disappearance is due to reaction with oxygen to form a volatile oxide. Platinum and iridium, which were included for comparison, fared much better.