Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPTICAL REFLECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Characterization of the Surface of Silver Ion-Implanted Silicon by Optical Reflectance

The optical reflection of the surface of silicon implanted with Ag{sup +} ions at low energy of 30 keV in a wide dosage range of 5.0·10{sup 14}–1.5·10{sup 17} ion/cm{sup 2} was studied in parallel with electron microscopy observation of the samples. It was found that with increasing ion dose of irradiation, the reflection intensity in the UV range of the Si spectrum decreases monotonically due to amorphization and macrostructuring of Si near-surface layer. In the long-wavelength region of the reflection spectra, a selective band with a maximum near 830 nm is recorded due to the plasmon resonance of ion-synthesized Ag nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Collapse and revival of photoinduced oscillations in the optical reflectivity of bismuth

The average optical reflectivity of bismuth as a function of time t after irradiation by a short laser pulse has been calculated. The amplitude A of photoinduced oscillations in the average optical reflectivity is shown to have extrema under certain conditions. The time τ{sub j} (j is a natural number) at which the amplitude A reaches the jth extremum has been calculated. The calculated dependences of the times τ{sub 1} and τ{sub 2} at which, respectively, the first and second extrema (the first minimum and the first maximum) of the amplitude A are reached on the maximum laser pulse energy density Q are consistent with the experimental data from.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonant Optical Reflection from AsSb–AlGaAs Metamaterials and Structures

The optical reflection in periodic structures based on a semiconductor AlGaAs matrix containing two-dimensional arrays of plasmonic AsSb nanoinclusions was studied. The number of periods was 12 or 24. The spatial period was near 110 nm in both cases. In the experimental optical reflection spectra at normal incidence we observed resonant Bragg diffraction with the main peaks at wavelengths of 757 or 775 nm, depending on the spatial period of the nanostructure. The magnitudes of the resonance peaks reached 19 and 31% for the systems of 12 and 24 AsSb–AlGaAs layers, while the volume fraction of the nanoinclusions was much less than 1%. In the case of light incident at inclined angles, the Bragg-diffraction pattern shifted according to Wulff-Bragg’s law. Numerical calculations of the optical reflection spectra were performed using the transfer-matrix method by taking into account the spatial geometry of the structures and the resonance characteristics of the plasmonic AsSb layers.

36 MATERIALS SCIENCE↗

Hybrid height and slope figuring method for grazing-incidence reflective optics

Grazing-incidence reflective optics are commonly used in synchrotron radiation and free-electron laser facilities to transport and focus the emitted X-ray beams. To preserve the imaging capability at the diffraction limit, the fabrication of these optics requires precise control of both the residual height and slope errors. However, all the surface figuring methods are height based, lacking the explicit control of surface slopes. Although our preliminary work demonstrated a one-dimensional (1D) slope-based figuring model, its 2D extension is not straightforward. In this study, a novel 2D slope-based figuring method is proposed, which employs an alternating objective optimization on the slopes in the x - and y -directions directly. An analytical simulation revealed that the slope-based method achieved smaller residual slope errors than the height-based method, while the height-based method achieved smaller residual height errors than the slope-based method. Therefore, a hybrid height and slope figuring method was proposed to further enable explicit control of both the height and slopes according to the final mirror specifications. An experiment to finish an elliptical-cylindrical mirror using the hybrid method with ion beam figuring was then performed. Both the residual height and slope errors converged below the specified threshold values, which verified the feasibility and effectiveness of the proposed ideas.

36 MATERIALS SCIENCE↗

Physics of reflective optics for the soft gamma-ray photon energy range

Traditional multilayer reflective optics that have been used in the past for imaging at x-ray photon energies as high as 200 keV are governed by classical wave phenomena. However, their behavior at higher energies is unknown, because of the increasing effect of incoherent scattering and the disagreement between experimental and theoretical optical properties of materials in the hard x-ray and gamma-ray regimes. Here, we demonstrate that multilayer reflective optics can operate efficiently and according to classical wave physics up to photon energies of at least 384 keV. We also use particle transport simulations to quantitatively determine that incoherent scattering takes place in the mirrors but it does not affect the performance at the Bragg angles of operation. Furthermore, our results open up new possibilities of reflective optical designs in a spectral range where only diffractive optics (crystals and lenses) and crystal monochromators have been available until now.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Off-axis phonon and photon propagation in porous silicon superlattices studied by Brillouin spectroscopy and optical reflectance

Brillouin light scattering experiments and optical reflectance measurements were performed on a pair of porous silicon-based optical Bragg mirrors which had constituent layer porosity ratios close to unity. For off-axis propagation, the phononic and photonic band structures of the samples were modeled as a series of intersecting linear dispersion curves. Zone-folding was observed for the longitudinal bulk acoustic phonon and the frequency of the probed zone-folded longitudinal phonon was shown to be dependent on the propagation direction as well as the folding order of the mode branch. There was no conclusive evidence of coupling between the transverse and the folded longitudinal modes. Two additional observed Brillouin peaks were attributed to the Rayleigh surface mode and a possible pseudo-surface mode. Both of these modes were dispersive, with the velocity increasing as the wavevector decreased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Decay of photoinduced oscillations of the optical reflection coefficient of bismuth

A model describing the decay of photoinduced oscillations of the optical reflection coefficient R of bismuth is constructed, taking the crystal lattice anharmonicity into account. The decay time of oscillations of R is calculated as a function of the energy density of a laser pulse. The results of calculations explain the experimental data on the anomalously strong decay of oscillations of the optical reflection coefficient of bismuth (the decay time decreases by more than an order of magnitude with an increase in the laser pulse energy density from 0 to 4 mJ/cm{sup 2})

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

At-wavelength metrology facility for soft X-ray reflection optics

A new Optics Beamline coupled to a versatile UHV reflectometer is successfully operating at BESSY-II. It is used to carry out at-wavelength characterization and calibration of in-house produced gratings and novel nano-optical devices as well as mirrors and multilayer systems in the UV and XUV spectral region. This paper presents most recent commissioning data of the beamline and shows their correlation with initial beamline design calculations. Special attention is paid to beamline key parameters which determine the quality of the measurements such as high-order suppression and stray light behavior. The facility is open to user operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical reflectivity improvement by upgrading metallic glass film quality

The effects of atomic-defect and free-volume amounts of metallic glassy film on the optical reflectivity and mechanical properties of the sputtered metallic glass thin films are explored. With a lower Ar working pressure and the proper post-annealing at temperatures slightly lower than the glass-transition temperature T{sub g}, film free volumes and defects would reduce, resulting in better atomic bonding and higher film hardness/modulus, which in turn leads to lower electric resistivity and higher optical reflectivity. Annealing above T{sub g} would induce crystalline structure which would lead to competition with the optical transition of the Drude free electrons and hinder the optical reflectivity in the visible range.

36 MATERIALS SCIENCE↗

Reflection Optical Imaging to Study Oxygen Evolution Reactions

Discovery of high-efficiency water-splitting catalysts is critical for clean hydrogen fuel generation. Quantitative and reliable chemical imaging methods can play a crucial role in providing critical catalyst efficiency information for materials development and screening. Here, we developed a reflection optical imaging method to map the performance of transition metal oxide catalysts for oxygen evolution reaction (OER). The generated high concentration of oxygen in the electrolyte will decrease the refractive index of the solutions near the electrode and change the reflectivity of optical images. We successfully imaged and measured the OER on cobalt oxide, and the localized current density and overpotential distribution maps have been extracted. The oxidation and reduction of cobalt oxide can be imaged with our reflection optical imaging method as well. These maps showed that the catalytic activities are quite different at different locations, and some regions showed much higher activities. This is due to the non-uniformity created by the catalyst synthesis process and demonstrates the importance of using the optical imaging method to map the localized catalytic efficiency. In addition, the NiFe alloy’s OER catalytic activities have been studied as well. The proposed reflection optical imaging method could find many applications in catalyst activity measurement and screening.

Electrochemistry↗

Investigation of E{sub 1}(LO) phonon-plasmon coupled modes and critical points in In{sub 1-x}Ga{sub x}N thin films by optical reflectance measurements

Low energy optical modes of molecular beam epitaxy-grown In{sub 1-x}Ga{sub x}N thin films with 0<=x<=0.6 are investigated using infrared reflectance measurements. We found that the reflectance of the films for wave vectors in the range from 600 to 800 cm{sup -1} is determined by the high energy E{sub 1}(LO)-plasmon coupled modes. In the higher energy regime of the UV-visible reflectance spectrum of InN, critical points with energies 4.75, 5.36, and 6.12 eV belonging to A and B structures are observed. The energies of these critical points increase with increasing values of x, similar to the band gap energy of these films.

36 MATERIALS SCIENCE↗

Optical reflectance imaging reveals interlayer coupling in mechanically stacked MoS 2 and WS 2 bilayers

Optical reflectance imaging is a popular technique for characterizing 2D materials, thanks to its simplicity and speed of data acquisition. The use of this method for studying interlayer phenomena in stacked 2D layers has, however, remained limited. Here we demonstrate that optical imaging can reveal the nature of interlayer coupling in stacked MoS 2 and WS 2 bilayers through their observed reflectance contrast versus the substrate. Successful determination of interlayer coupling requires co-optimization of the illumination wavelength and the thickness of an underlying SiO 2 film. Our observations are supported by multilayer optical calculations together with an analysis of the effect of any interlayer gap. This approach promises quick characterization of constructed 2D material systems.

Nguyen, Vu↗

A reflective optical transport system for ultraviolet Thomson scattering from electron plasma waves on OMEGA

A reflective optical transport system has been designed for the OMEGA Thomson-scattering diagnostic. A Schwarzschild objective that uses two concentric spherical mirrors coupled to a Pfund objective provides diffraction-limited imaging across all reflected wavelengths. This enables the operator to perform Thomson-scattering measurements of ultraviolet (0.263 {mu}m) light scattered from electron plasma waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resonant optical reflection by a periodic system of the quantum well excitons at the second quantum state

A periodic multiple quantum well GaAs/AlGaAs structure was designed, grown, and characterized in order to reveal resonant features in optical spectra when the Bragg resonance was tuned to the second quantum state x(e2-hh2) of the heavy-hole exciton-polaritons in the multiple quantum wells. This double resonance was demonstrated by tuning the incident angle of the light as well as by comparison with a single quantum well structure. A significant enhancement of the light-matter interaction was observed, which manifests itself by strong resonant optical reflection and electroreflection.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New figuring model based on surface slope profile for grazing-incidence reflective optics

Surface slope profile is widely used in the metrology of grazing-incidence reflective optics instead of surface height profile. Nevertheless, the theoretical and experimental model currently used in deterministic optical figuring processes is based on surface height, not on surface slope. This means that the raw slope profile data from metrology need to be converted to height profile to perform the current height-based figuring processes. The inevitable measurement noise in the raw slope data will introduce significant cumulative error in the resultant height profiles. As a consequence, this conversion will degrade the determinism of the figuring processes, and will have an impact on the ultimate surface figuring results. To overcome this problem, an innovative figuring model is proposed, which directly uses the raw slope profile data instead of the usual height data as input for the deterministic process. In this article, first the influence of the measurement noise on the resultant height profile is analyzed, and then a new model is presented; finally a demonstration experiment is carried out using a one-dimensional ion beam figuring process to demonstrate the validity of our approach.

36 MATERIALS SCIENCE↗