Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Near-IR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Near-IR Luminescence Tuning in a Series of Chalcogenophene Carboxylate-Decorated Neodymium Dimers

Here, the solvothermal synthesis of a series of Nd dimers decorated with various chalcogenophene carboxylates and 2,2':6',2"-terpyridine of the general formula, [Nd 2 (µ-XC 5 H 3 O 2 ) 2 (XC 5 H 3 O 2 ) 4 (N 3 C 15 H 11 ) 2 (H 2 O) 2 ] where X = O, S, Se, and Te, is reported. The solid-state structures were characterized using single-crystal X-ray diffraction (scXRD) and all the complexes are isomorphous, despite substitution of the heterocyclic chalcogen; phase purity was confirmed via powder X-ray diffraction (pXRD). Vibrational spectroscopy was collected and correlations between chalcogen identity and the binding strength of the carboxylate groups of the chalcogenophene ligands with each metal center were shown to be independent of chalcogen identity. All four complexes displayed Nd(III)-based near-IR luminescence and exhibited ligand-sensitized emission. Varying the chalcogenophene chromophore enabled tuning of the sensitizing triplet state energy level, as evidenced by an 8-fold increase in the sensitization of the TeCA-decorated dimer relative to the other chalcogenophene congeners. This behavior was rationalized by comparing the Nd(III) acceptor and ligand donor states across the series. The donor triplet state of each ligand was estimated via low-temperature (77 K) phosphorescence measurements from 1:1 mixtures with Gd(III); these were found to be 24,631 cm –1 for furan-2-carboxylic acid (FCA), 23,764 cm –1 for thiophene-2-carboxylic acid (TCA), 22,548 cm –1 for selenophene-2-carboxylic acid (SeCA), and 21,186 cm –1 for tellurophene-2-carboxylic acid (TeCA). The greater sensitization efficiency of TeCA is the result of well-matched ligand donor and metal acceptor levels and thus suppression of nonradiative back-energy transfer. More broadly, triplet energy level information for these ligands serves as a guide for future application to other target metals based on the electronic properties necessary to effect efficient sensitization.

Coordination Chemistry↗
DOE OSTI2025

Side Chain Engineering of Near-IR Aza-BODIPY Dyes Enables Processable Films with High Hole Mobility in Diodes

Boron chelated azadipyrromethene (Aza-BODIPY) derivatives are promising candidates for near-infrared optoelectronic applications due to their tunable absorption, electron-deficient core, and strong π-conjugation. Here, in this work, we synthesized and studied a series of 1-naphthylethynyl-substituted aza-BODIPY molecules featuring hexyl or hexyloxy solubilizing groups at either the proximal or the distal phenyl positions. These substitutions were designed to improve the solubility, film formation, and optoelectronic properties. We found that solubilizing groups not only enabled uniform solution-processed films but also fine-tuned key properties, such as absorption onset, oxidation potential, and energy levels. Charge transport analysis showed consistently high hole mobilities (∼10 –3 cm 2 /V s) across all substituted derivatives when CuI was used as the hole transport layer, regardless of film morphology. In contrast, electron mobilities tended to be low and inconsistent, partly because of the relatively poor-quality films on the ZnO electron transport layer. Overall, we have shown that solubilizing groups enable film solution-casting and can fine-tune the properties of these near-infrared aza-BODIPY derivatives.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Highly Responsive Near-Infrared Photodetector Based on Contactless PdSe 2 Integration with a Few-Layered MoSe 2 Field-Effect Transistor

Two-dimensional (2D) semiconductors with narrow bandgaps are promising candidates for near- and far-infrared (IR) photodetection, particularly in the telecommunication spectral window. However, current low-bandgap IR photodetectors face significant challenges due to their high dark current, increased carrier recombination, and thermally generated noise. Here, in this work, a hybrid phototransistor is demonstrated by integrating direct, contact-free palladium diselenide (PdSe 2 ) as a highly responsive IR detection layer with a non-IR-absorbing molybdenum diselenide (MoSe 2 ) field-effect transistor (FET), using a near-IR source at a wavelength of λ = 1650 nm. Exfoliated PdSe 2 flakes integrated into a back-gated FET architecture exhibit ambipolar transport behavior, with extracted hole and electron mobilities of 24.8 cm 2 V –1 s –1 and 58.4 cm 2 V –1 s –1 , respectively. The devices show a clear photocurrent generation under the illumination of a λ = 1650 nm laser source, achieving a notable responsivity of ∼300 mA W -1 at an applied gate voltage of 15 V, which highlights the suitability of PdSe 2 as a narrow-bandgap material for photodetection. Photoresponsivity saturates and does not have any effect above an applied gate voltage of 15 V. To further tune the photoresponsivity performance continuously with the applied gate voltage, we construct a van der Waals heterostructure phototransistor, where few layers of PdSe 2 are directly transferred onto the 2D channel region of a MoSe 2 FET, while avoiding any contact with the metal electrodes. In this heterostructure, PdSe 2 works as the primary active IR-absorbing layer, while MoSe 2 provides high-performance FET characteristics. This spatial separation of absorption and transport facilitates efficient interlayer charge transfer and charge separation, resulting in high responsivities of up to 972 mA W –1 at near-IR wavelengths and a low power density of 1.5 mW/mm 2 . The responsivity of our photodetector is comparable to that of some state-of-the-art commercially available NIR photodetectors, highlighting the potential of PdSe 2 -based heterostructures as scalable, CMOS-compatible platforms for high-performance near-IR detection.

Infrared (IR) photodetectors↗
DOE OSTI2025

Direct and Indirect Interfacial Electron Transfer at a Plasmonic p-Cu 7 S 4 /CdS Heterojunction

Plasmonic semiconductors exhibit significant potential for harvesting near-IR solar energy, although their mechanisms of plasmon-induced hot electron transfer (HET) are poorly understood. We report a transient absorption study of plasmon-induced HET in p-Cu 7 S 4 /CdS type II heterojunctions. Near-IR excitation of the p-Cu 7 S 4 plasmon band at ~1400 nm leads to ultrafast HET into the CdS conduction band with a time constant of <150 fs and a quantum efficiency of ~0.054%. The injected hot electrons remain in CdS with an amplitude-weighted average lifetime of 1.9 ± 0.5 ns, significantly longer than that in Au/CdS heterostructures, suggesting that plasmonic semiconductors can slow down charge recombination due to the presence of a bandgap. The excited near-IR plasmon does not decay by coupling to the interfacial charge transfer transition, likely due to its energy mismatch. This study provides a detailed mechanistic understanding and possible directions for improving plasmonic HET in plasmonic semiconductor heterojunctions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Spin-Controllable Dynamics in Defect-Engineered Carbon Nanotubes as Single Photon Emitters: Data-Driven Modeling and Computations

Quantum technologies, such as quantum computing and sensing, require efficient single-photon emission (SPE) sources that operate at room temperature in telecom wavelengths. While several materials can serve as SPE sources, no single platform meets all the criteria for efficiency, ambient operation, and scalability. Single-walled carbon nanotubes (SWCNTs) with covalently attached molecules offer a promising solution. Their SPE can be easily tuned via modifications of the SWCNT's diameter, chirality, and bonded molecules, enabling emission across near-IR to telecom wavelengths at ambient conditions. However, to fully realize the potential of SWCNTs and unlock their quantum capabilities, a deeper understanding of how structural defects from molecular adducts affect their emission and competing photoexcited processes is essential. To address this gap in our knowledge, this project combined quantum chemistry calculations with data-driven methods of cheminformatics (QSAR) and machine learning (ML). The developed computational approaches have provided several design strategies for covalent functionalization of SWCNTs to improve their optical response. The collaboration with Los Alamos National Lab (LANL) enabled direct comparison of computational and experimental data, facilitating method validation. This partnership was enhanced through access to LANL's Center for Integrated Nanotechnologies (CINT) utilizing User Facility Program and summer internships, which provided three NDSU graduate students with hands-on experience at LANL. The outcomes of this project included (1) Advancing the current stage of computational methods in accurate modeling of non-adiabatic spin-dependent photoexcited dynamics and its applicability to nanosystems consisting of thousands of atoms, realized as open-access codes linked to existing DFT-based software; (2) Establishing the relationship between the structure of adducts and SWCNTs and intrinsic excitonic and spin properties of defect states for guiding novel synthetic strategies and experimental probes of chemically functionalized SWCNTs as near-IR emitting materials; (3) Generating virtual libraries of hypothetical functionalized SWCNTs for virtual screening of their chemical structures and optical properties, leveraging new functionalities of SWCNTs; (4) Offering a unique experience for NDSU graduate students that prepared them for future scientific careers related to materials modeling and big data processing. These results were summarized in 12 published journal papers and 3 recently submitted papers. One of a key finding is that the position of defect sites on the SWCNT surface primarily drives the emission redshift (up to 100 meV), while the polarity of the defect-inducing molecules has a much smaller effect (~10 meV). However, the electron-donating or withdrawing properties of a molecule influence selecting reactivity of defect sites. These insights important for optimizing synthetic protocols for desired emissions in SWCNTs. We also revealed that the interaction between two defects at various positions on the SWCNT enhances the redshift and optical activity of states, favoring strong near-IR emission. This suggests that manipulations in defect concentrations is a promising strategy for controlling efficient emission. Mostly important, the defect position was found controllable by the spin states of photoexcited intermediates: Excited aromatic molecules form ortho defects with SWCNTs at their singlet states in the presence of oxygen, while oxygen-free conditions favor para defects via the triplet-state mechanism. Additionally, a heat-activated [2+2] cycloaddition reaction facilitates divalent defect formation with fewer bonding positions that narrows emission bands. These groundbreaking findings have been experimentally validated and significantly advance our understanding of defect chemistry in SWCNTs. Using a novel encoding technique and 3D-MoRSE descriptors, we developed highly accurate ML/QSAR models to predict both the 3D structure and optical properties of SWCNTs with chemical defects. This model enabled the creation of a virtual library of 125,556 structures, providing new insights into the relationship between SWCNT-defect structure and emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Wavelength dependent photochemistry of an iron dinitrogen hydride complex via multiple spectroscopies – competing ejection of axial ligands

Nitrogenase (N 2 ase) is a critical enzyme which catalyzes the reaction of N 2 → NH 3 in nature. Studies on the spectroscopy and photochemistry of trans-[Fe II (DMeOPrPE) 2 (N 2 )H][BPh 4 ] (1) and its isotopologues (2–6) provide a possible first step to evaluate the geometries and properties of the real N 2 ase–N 2 structure(s). In this article, we have used FT-IR, FT-Raman, synchrotron-based nuclear resonant vibrational spectroscopy (NRVS) and DFT calculations to examine and assign the normal modes of these complexes. In addition, we have monitored their wavelength dependent photochemistry using mid-IR, near-IR, NRVS, and Mössbauer spectroscopies. Two distinct photolysis pathways are observed with mid-IR at (nominal) 4 K – (1) the cleavage of Fe–N 2 bond in UV or visible light photolyses, which presents a unipolar disappearance of the N 2 peak at 2094 cm −1 and is recombinable; (2) the ejection of trans hydrogen atom with UV irradiation, which has a pair of bipolar peaks with the disappearance of N 2 at 2094 cm −1 and the appearance of a new species at 2056 cm −1 and is non-recombinable. The latter peak is well aligned with the N 2 peak in an Fe I reference complex (7). The combination of mid IR monitored photolysis/recombination and NRVS monitored photolysis form the central evidence for the conclusions in this article. In particular, the Fe II –N 2 and Fe I –H·dissociations are in competition with each other in UV or UV-inclusive photolyses of this dinitrogen hydride complex. In addition, near-IR and Mössbauer also provide consistent evidence about Fe I . This wavelength dependent photochemical work is the first one on a reaction active N 2 ase–N 2 model complex and it also demonstrates the competition ejection between two axial ligands (H· and N 2 ). It offers valuable information for future studies on real N 2 ase–N 2 and its photolysis products.

Dong, Weibing [Liaoning Normal University (China)]↗
DOE OSTI2025

Imaging Domain Walls in van der Waals Ferroelectrics Using Tip-Enhanced Second Harmonic Generation

van der Waals ferroelectrics have captured significant interest for applications in novel memory and neuromorphic computing devices. Within these materials, interfaces between regions of different ferroelectric polarizations (i.e., domain walls) exhibit distinctive behaviors. Characterization of these behaviors remains a challenge, as domain wall thickness resides at the nanoscale. Using tip-enhanced second harmonic generation (TESHG), we demonstrate nanoscale imaging of domain walls in 2D ferroelectric α-In 2 Se 3 . With a narrow-band near-IR laser, we take advantage of high-wavelength, off-resonant signal enhancement to generate robust and reproducible TESHG. In conclusion, a 16 nm spatial resolution is achieved, and we identify spectral features suggesting that nonlocal effects from domain walls persist nanometers into adjacent domains.

Mantilla, Alexander B. C. [Washington State Univ.,↗
DOE OSTI2025

Dual-Responsive Macromolecular Surfaces with Binary Patterns

The development of nanopatterned interfaces incorporating multiple stimuli-responsive polymers has great potential for advancing smart sensors and molecular capture devices, yet it remains challenging due to limitations in patterning techniques and “grafting from” methods. Here, we present a binary-patterned surface featuring honeycomb-shaped photothermal polypyrrole (PPy) and thermally responsive poly(ethylene glycol methyl ether acrylate-co-poly(ethylene glycol) methyl ether acrylate) [poly(EGMEA-co-PEGMEA)] brushes within the cavities, fabricated using colloidal lithography and surface-initiated photoinduced electron transfer-reversible addition–fragmentation chain transfer (SI-PET-RAFT) polymerization. The morphology of the surface can be precisely tuned by adjusting the height of each domain. This design integrates unique topographical features with the stimuli-responsiveness of the polymer, enabling the collapse of the copolymer brushes through direct heating or photothermal conversion of PPy under near-IR light. In conclusion, this innovative system offers potential capture-release functionality, providing versatility for diverse applications and enhancing adaptability across different functional scenarios.

Copolymers↗
DOE OSTI2025

Complexity in the Photofunctionalization of Single-Wall Carbon Nanotubes with Hypochlorite

The reaction of aqueous suspensions of single-wall carbon nanotubes (SWCNTs) with UV-excited sodium hypochlorite has previously been reported to be an efficient route for doping nanotubes with oxygen atoms. Here, we have investigated how this reaction system is affected by pH level, dissolved O 2 content, and radical scavengers and traps. Products were characterized with near-IR fluorescence, Raman, and XPS spectroscopy. The reaction is greatly accelerated by removal of dissolved O 2 and strongly suppressed by TEMPO, a radical trap. Alcohols added as radical scavengers alter the reaction efficiency and the product peak emission wavelengths. Photofunctionalization with 300 nm irradiation is substantially less efficient at pH levels low enough to protonate the OCl – ion to HOCl. We deduce that in mildly treated high pH samples, the main product is sp 2 hybridized O-doped adducts formed by reaction of SWCNTs with atomic oxygen in its 3 P (ground) level. By contrast, treatment under low pH conditions leads to sp 3 hybridized SWCNT adducts formed by the addition of secondary radicals from reactions of • OH and • Cl. There is also evidence for additional photoreactions of product species under stronger irradiation. Researchers using photoexcited hypochlorite for SWCNT functionalization should be alert to the range of products and the sensitivity to reaction conditions in this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

MXenoids: Generalization of MXene-Inspired Covalent Surface Modifications Across Two-Dimensional Materials

The ability to perform versatile covalent surface modifications in two-dimensional (2D) inorganic materials marks a significant advance in the functionalization of this broad family of materials. One particularly successful example of 2D materials with chemically modifiable surfaces are 2D transition metal carbides and nitrides (MXenes). MXenes' strong in-plane metal-carbon bonds and labile surface metal-halide bonds create altogether unprecedented opportunities for versatile postsynthetic modifications and assembling complex materials, including various organic-inorganic hybrids. Here, we demonstrate the general applicability of this surface modification strategy to non-MXene halide-terminated 2D materials, termed MXenoids. These surface modifications enable compositional and electronic structure engineering, introduce chiral hybrid organic-inorganic structures, and photoluminescence ranging from near-IR to blue. This study highlights the avenue of surface chemistry-driven materials design, enhancing the functional capabilities of 2D materials.

Zhou, Chenkun [University of Chicago, IL (United S↗
DOE OSTI2025

Enhanced upconversion and photoconductive nanocomposites of lanthanide-doped nanoparticles functionalized with low-vibrational-energy inorganic ligands

Upconverting nanoparticles (UCNPs) convert near-infrared (IR) light into higher-energy visible light, allowing them to be used in applications such as biological imaging, nano-thermometry, and photodetection. It is well known that the upconversion luminescent efficiency of UCNPs can be enhanced by using a host material with low phonon energies, but the use of low-vibrational-energy inorganic ligands and non-epitaxial shells has been relatively underexplored. Here, we investigate the functionalization of lanthanide-doped NaYF4 UCNPs with low-vibrational-energy Sn2S64- ligands. Raman spectroscopy and elemental mapping are employed to confirm the binding of Sn2S64- ligands to UCNPs. This binding enhances upconversion efficiencies up to a factor of 16, consistent with an increase in the luminescent lifetimes of the lanthanide ions. Annealing Sn2S64--capped UCNPs results in the formation of a nanocomposite comprised of UCNPs embedded within an interconnected matrix of SnS2, enabling each UCNP to be electrically accessible through the semiconducting SnS2 matrix. This facilitates the integration of UCNPs into electronic devices, which we demonstrate through the fabrication of a UCNP-SnS2 photodetector that detects UV and near-IR light. Our findings show the promise of using inorganic capping agents to enhance the properties of UCNPs while facilitating their integration into optoelectronic devices.

Pan, Jia-Ahn↗
DOE OSTI2026

photoD with Rubin ’s Data Preview 1: First stellar photometric distances and faint blue star deficits

Aims. We investigate the utility of Rubin’s Data Preview 1 (DP1) for estimating stellar number density profiles across the Milky Way halo. Methods. We used stellar broad-band near-UV to near-IR ugrizy photometry released in Rubin’s DP1 to estimate distance and metallicity for blue main sequence stars brighter than r = 24 in three ~1.1 sq. deg. fields at southern Galactic latitudes. Results. Compared to TRILEGAL simulations of the Galaxy’s stellar content, we found a likely deficit of blue main sequence turn-off stars with 22 < r < 24. We interpreted this discrepancy as a signature of a steeper halo number density profile at galactocentric distances 10–50 kpc than the canonical ~1/r 3 profile assumed in TRILEGAL simulations. Conclusions. This interpretation is consistent with earlier suggestions based on observations of more luminous, but much less numerous, evolved stellar populations, along with a few pencil beam surveys of blue main sequence stars in the northern sky. These results bode well for the future Galactic halo exploration with Rubin’s Legacy Survey of Space and Time (LSST).

Galaxy: fundamental parameters↗
DOE OSTI2026

Ultrafast x-ray imaging of coherently controlled molecular dynamics in real space and time

Coherent control aims to manipulate chemical processes on the latent length and timescales of atoms and bonds, scales that are intrinsic to molecular dynamics but not directly resolved by most experimental probes. As a result, existing coherent-control experiments, which overwhelmingly rely on spectroscopic observables, leave a crucial blind spot: the direct, real-space recovery of all atomic and molecular rearrangements in response to coherently controlled excitations. Here, we overcome this limitation by integrating a Tannor-Kosloff-Rice pump-control-probe scheme with ultrafast X-ray scattering to capture snapshots of the wavepacket motion in a benchmark molecular system. We demonstrate this by photoexciting diatomic iodine vapor with a visible pump pulse, selectively steering the wavepacket toward ground-state recombination or dissociative pathways with a time-delayed near-IR control pulse, and recording the dynamics with angstrom and femtosecond precision with an ultrashort hard X-ray probe pulse. By comparing these structural observations with numerical solutions of the time-dependent Schrödinger equation, we reveal how coherent control actively reshapes the molecular charge density distribution. Our results pave the way for leveraging structural feedback as a control handle and provide a fundamental microscopic visualization of quantum decoherence and energy redistribution at the atomic level.

Hopper, Thomas R. [SLAC National Accelerator Labor↗
DOE OSTI2025

Probing the Sustainable Reduction of CO 2 , N 2 and NO 3 to Fuels and Chemicals using Non-Traditional Porphyrinoid Catalysts

For the last several decades, numerous strategies have been proposed to be able to interconvert electricity and commodity fuels for transportation and other applications. Even as solar and wind energy become more widely available, these renewable energy sources are not always available where the population is most dense or during peak times of energy demand. One plausible solution to the issue of electricity storage and transport is to use electricity to drive the formation of high-energy compounds and chemical fuels. As a result, the electrochemical conversion of CO 2 into chemical fuels has received major attention as a multi-pronged approach for electricity coversion, storage, and transport. Similar strategies are also attractive for conversion of N 2 and NO x into value added compounds such as ammonia. Metalloporphyrin and metallocorrole complexes are comprised of aromatic tetrapyrrole scaffolds and have been extensively studied as homogeneous catalysts for critical catalytic processes like the electrochemical CO 2 reduction reaction (eCO 2 RR) to generate CO as feedstock for the Fischer–Tropsch process to generate a variety of hydrocarbons as chemical fuels. Despite their significance and impact, efficiently driving such catalytic reduction processes is challenging for multiple reasons. Such processes require multiple-electron transfer events, as opposed to single-electron redox chemistry that forms high-energy singly-reduced intermediates. In addition, these electron transfer events must be coupled to proton-transfer steps and avoid application of high overpotentials where proton (H + ) reduction to generate H 2 (as well as other side-reactions) can lower the selectivity and energy efficiency of the eCO 2 RR process. Certain Fe(III) aromatic tetrapyrroles (e.g., porphyrins and corroles) have been reported to overcome these challenges, but are often difficult to synthesize and modify, and have a tendency to support single-electron redox chemistry at the metal as opposed to multielectron redox involving the ligand and metal in concert. Other families of tetrapyrroles in which all four meso-carbons are reduced (i.e., sp 3 -hybridized) are also known in the literature. These non-aromatic tetrapyrroles are known as porphyrinogens and support multi-electron redox chemistry which has been elaborated by several groups, prompting researchers to consider whether these scaffolds may improve the kinetics and efficiencies of multi-electron steps attendant to activation of thermodynamically stable small-molecule substrates such as CO 2 , N 2 , NO 3 − , and NO 2 − . Although porphyrinogens support multi-electron redox properties, the four sp 3 -hybridized meso-carbons inherent to the tetrapyrrole core completely disrupt π-conjugation between pyrrolic units, which compromises the photochemical properties of porphyrinogens in comparison to that of traditional porphyrinoids. Moreover, the highly reducing nature of porphyrinogens predisposes these platforms to extreme air and water sensitivity. Accordingly, such metalated porphyrinogens are often pyrophoric and/or incompatible with many common organic solvents (CH 2 Cl 2 , CHCl 3 , CH 3 CN, EtOAc, etc.). Hence, reports of efficient small-molecule activation or catalysis supported by porphyrinogens have been limited. To overcome the instability of porphyrinogens while retaining the scaffold’s attractive multi-electron redox properties, we have directed attention to establishing less-well studied groups of non-aromatic tetrapyrroles (i.e., phlorins, biladienes, and isocorroles). These non-traditional tetrapyrroles each contain just a single sp 3 -hybridized meso-carbon, which ablates the platforms aromaticity but still provides an extended π-framework. In addition to developing innovative platforms that may be used to sustainably generate value-added chemicals, fuels, and ammonia via either photo- or electrocatalytic approaches our work also has significantly broadened our understanding of how to prepare and modulate the properties of non-aromatic tetrapyrroles for other applications. Our efforts entailed a synergistic partnership and active collaborations with Drs. David C. Grills and Mehmed Z. Ertem (both of Brookhaven National Lab) to better characterize isocorroles (and related non-aromatic tetrapyrroles) using a variety of advanced spectroscopic and theoretical methods. Our combined efforts have shown that the combination of properties that isocorroles (and related tetrapyrroles) provide results in good chemical stability paired with unique redox and photochemical characteristics that are not typically supported by simple and/or unadorned aromatic tetrapyrroles. Beside redox chemistry, the photochemistry of isocorroles and other non-aromatic tetrapyrroles containing one sp 3 -hybridized meso-carbon is also appealing due to their absorption in the long-visible to near-IR regions, which are essential for photocatalysis and related applications that benefit from direct excitation at these wavelengths. The results reported vastly improve our understanding of non-aromatic tetrapyrrole synthesis, properties and utility for activation of small molecule substrates such as O 2 and CO 2 in the presence of weak cationic organic acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Using Gravitational Lensing to Probe for Candidate Quintessential Galaxies in the Epoch of Reionization

Abstract Understanding the properties of the first generation of galaxies is an ongoing challenge in observational astrophysics. James Webb Space Telescope deep-field observations have led to the identification of large numbers of galaxies within the Epoch of Reionization (EoR); however, it remains observationally challenging to study the detailed properties of the most numerous, faint high- z galaxies without strong gravitational lensing. To this end, we present five m AB ≃ 24 galaxies, all projected behind the cores of massive clusters where high lensing magnifications significantly (≳1.5 mag) boost their observed brightness. These galaxies are each characterized by a drop-off in their spectra between the near-IR and optical wavelengths, suggesting the presence of a Lyman break at z > 6. The bright sources enable precise dropout color constraints. We combine the dropout data with follow-up imaging to constrain continuum slopes redward of their breaks. Using the open-source spectral energy distribution modeling software Prospector , we characterize two of these galaxies as probable high- z ( z ∼ 6.5–7) and three as probable low- z ( z ∼ 2) sources, demonstrating that for very bright ( m AB < 24) dropout candidates even limited photometric data have good power to distinguish between high- z galaxies and red or dusty low- z galaxies. The two candidate high- z dropouts are comparably bright to the brightest galaxies identified at such redshifts in deep fields, but due to lensing magnifications are intrinsically fainter by at least 1.5 mag. If confirmed, these galaxies represent exciting laboratories for performing detailed follow-up studies of galaxy properties within the EoR.

Roberson, Joshua [University of Cincinnati] (ORCID↗
DOE OSTI2025

exoALMA. XI. ALMA Observations and Hydrodynamic Models of LkCa 15: Implications for Planetary Mass Companions in the Dust Continuum Cavity

In the past decade, the Atacama Large Millimeter/submillimeter Array (ALMA) has revealed a plethora of substructures in the disks surrounding young stars. These substructures have several proposed formation mechanisms, with one leading theory being the interaction between the disk and newly formed planets. In this Letter, we present high angular resolution ALMA observations of LkCa 15’s disk that reveal a striking difference in dust and CO emission morphology. The dust continuum emission shows a ringlike structure characterized by a dust-depleted inner region of ~40 au in radius. Conversely, the CO emission is radially smoother and shows no sign of gas depletion within the dust cavity. We compare the observations with models for the disk–planet interaction, including radiative transfer calculation in the dust and CO emission. This source is particularly interesting, as the presence of massive planets within the dust cavity has been suggested based on previous near-IR observations. We find that the level of CO emission observed within the dust cavity is inconsistent with the presence of planets more massive than Jupiter orbiting between 10 and 40 au. Instead, we argue that the LkCa 15 innermost dust cavity might be created either by a chain of low-mass planets or by other processes that do not require the presence of planets.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

Spectral reflectance measurements of a virus host model

A technique has been developed to detect the characteristic spectral signatures of healthy and infected St. Augustine grass. It is possible to predict the coverage of the infected area provided ground truth coverage shows positive St. Augustine grass turf. Qualitative measurements from photographs of plants in the blue and red regions with polarization show that light reflected from healthy plants is more strongly polarized than that from diseased plants. Photographs taken through the blue Wratten 47 filter in conjuction with a polarizer show an excellent differentiation. A large photographic difference also appears in the red region. Much smaller differences were noted in the 540 to 550 nm region. Although the intensity in the near-IR region is much higher than the visible region of the spectrum, differences in the healthy and diseased plants' reflectance were quite small.

Toler, R. W.↗