Impact of lattice substitution in Ba-based NOx storage reduction catalysts on sulfation, desulfation and NOx reduction performance
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Not Available
Not Available
NOx reduction under net lean and near-stoichiometric conditions was carried out on Pt/Al 2 O 3 , Pt/CeO 2 /Al 2 O 3 and Pt/BaO/Al 2 O 3 washcoated monoliths to compare performance features and identify reaction pathways. The impact of the storage components (BaO, CeO 2 ) on the NOx conversion and byproduct (NH 3 and N 2 O) yields was quantified for a range of feed temperatures, reductant types (H 2 , and C 3 H 6 ), O 2 feed concentrations, and cycle times. The NOx storage functionality is essential for NOx reduction under net lean conditions while the oxygen storage functionality promotes NOx reduction for near-stoichiometric conditions. NOx conversion by H 2 under lean conditions is dependent on the NOx storage capacity of the catalyst, with Pt/CeO 2 /Al 2 O 3 and Pt/BaO/Al 2 O 3 exhibiting the highest NOx conversion below and above 300 °C, respectively. High NOx conversion is achieved over Pt/CeO 2 /Al 2 O 3 for anaerobic rich feeds at temperatures above 400 °C. Increasing the O 2 feed concentration enhances NOx conversion over Pt/CeO 2 /Al 2 O 3 below 400 °C but inhibits NOx conversion above 400 °C. The former is attributed to promotion of NO oxidation leading to NOx storage while the latter is attributed to O 2 inhibition of NO decomposition/reduction. Shorter cycle times increase the NOx conversion with C 3 H 6 as reductant over Pt/BaO/Al 2 O 3 under lean conditions and over PCA for the near-stoichiometric feed. The findings confirm that improved NOx storage utilization is mainly responsible for NOx conversion enhancement. A ceria redox pathway has only a secondary effect on NOx conversion under excess O 2 .
NO{sub x} storage and reduction on a model Pt/BaO/Al{sub 2}O{sub 3} catalyst was studied by means of in situ DRIFTS measurements. To examine the effect of ceria addition, experiments were also conducted using Pt/BaO/Al{sub 2}O{sub 3} to which Pt/CeO{sub 2} was added as a physical mixture in a 74:26 weight ratio. For the former catalyst, DRIFT spectra acquired during NO/O{sub 2} and NO{sub 2}/O{sub 2} storage indicated the formation of nitrite at 200 C during the initial stages of adsorption, while increasing the adsorption temperature appeared to facilitate the oxidation of nitrite to nitrate. The ceria-containing catalyst afforded similar DRIFT spectra under these conditions, although the presence of cerium nitrates was observed at 200 and 300 C, consistent with NO{sub x} storage on the ceria phase. DRIFT spectra acquired during NO{sub x} reduction in CO and CO/H{sub 2} showed that Ba nitrate species remained on the surface of both catalysts at 450 C, whereas the use of H{sub 2}-only resulted in complete removal of stored NO{sub x}. The observation of Ba carbonates when CO was present suggests that the inferior reduction efficiency of CO may arise from the formation of a crust of BaCO{sub 3} on the Ba phase, which inhibits further NO{sub x} reduction. DRIFT spectra acquired during lean-rich cycling (6.5 min lean, 1.0 min rich) with CO/H{sub 2} as the rich phase reductants revealed that a significant concentration of nitrates remained on the catalysts at the end of the rich phase. This implies that a large fraction of nitrate is not decomposed during cycling and thus cannot participate in NO{sub x} abatement through storage and regeneration.
We have investigated nitrate formation and decomposition processes, and measured NOx storage performance on Pt-K2O/Al2O3 catalysts as a function of potassium loading. After NO2 adsorption at room temperature, ionic and bidentate nitrates were observed by fourier transform infra-red (FTIR) spectroscopy. The ratio of the former to the latter species increased with increasing potassium loading up to 10 wt%, and then stayed almost constant with additional K, demonstrating a clear dependence of loading on the morphology of the K species. Although both K2O(10)/Al2O3 and K2O(20)/Al2O3 samples have similar nitrate species after NO2 adsorption, the latter has more thermally stable nitrate species as evidenced by FTIR and NO2 temperature programmed desorption (TPD) results. With regard to NOx storage performance, the temperature of maximum NOx uptake (Tmax) is 573 K up to a potassium loading of 10 wt%. As the potassium loading increases from 10 wt% to 20 wt%, Tmax shifted from 573 K to 723 K. Moreover, the amount of NO uptake (38 cm3 NOx/g catal) at Tmax increased more than three times, indicating that efficiency of K in storing NOx is enhanced significantly at higher temperature, in good agreement with the NO2 TPD and FTIR results. Thus, a combination of characterization and NOx storage performance results demonstrates an unexpected effect of potassium loading on nitrate formation and decomposition processes; results important for developing Pt-K2O/Al2O3 for potential applications as high temperature NOx storage-reduction catalysts.
Although Lean NO{sub x} Trap (LNT) catalyst technology has made significant strides in recent years, the issue of LNT durability remains problematic. Following on from our previous research concerning the effect of ceria addition on LNT preformance, in this study we focus on the role of ceria in ameliorating the deterioration of Ba-based LNT catalysts during aging. Indeed, we have observed that spectacular improvements in LNT durability can be achieved through the incorporation of CeO{sub 2}-ZrO{sub 2} into the LNT formulation, and, to a lesser extent, La-stabilized ceria.
The nature of H2 regeneration of a model Pt/Ba/Al2O3 LNT catalyst was investigated with specific focus on intra-catalyst formation and utilization of NH3 and its role in catalyst regeneration. In-situ measurements of the transient intra-catalyst species (H2, NH3, N2, NOx) distributions at different temperatures were used to detail the reaction evolution along the catalyst axis. Comparison of the species transients identifies unique individual natures for the reductant (H2), inert product (N2) and intermediate-reductant product (NH3) which readily explain the conventional effluent species sequence as an integral effect. The data demonstrates that NH3 is created on similar timescales as the N2 product inside the catalyst, but consumed as aggressively as H2 reductant along the catalyst. This spatiotemporal NH3 behavior experimentally confirms that Intermediate-NH3 regeneration pathway is active. Analysis at 200 and 325 C indicates equivalent local NOx storage, H2 consumption and regeneration effectiveness, but differing NH3/N2 ratio, suggesting a temperature-dependence of partitioning between Direct-H2 and Intermediate-NH3 regeneration pathways. Further experimental and numerical work is needed to more clearly understand the partitioning between the possible regeneration pathways. Nevertheless, the experimental data show that intermediate NH3 plays a significant role in LNT catalyst regeneration.
Explore the source record for details and available documents.
The control of NOx (NO and NO 2 ) emissions from so-called ‘lean-burn’ vehicle engines remains a challenge. The now commercial NOx adsorber (also known as lean-NOx trap (LNT) and NOx storage reduction (NSR) catalyst) technology is based upon the concept of storing NOx as nitrates over storage components, typically alkali or alkaline-earth species such as barium, during a lean-burn operation cycle and then reducing the stored nitrates to N2 during fuel-rich conditions over a precious metal catalyst. In part via this successful five-year CRADA project between PNNL and Cummins Inc. (CRADA PNNL/213), Cummins and the Johnson/Matthey Company commercialized this technology on the 2007 Dodge Ram pickup truck. In particular, this CRADA has focused on problems arising from either or both thermal and SO 2 deactivation which were impeding the ability of the technology to meet durability standards. The results obtained in this CRADA have provided an essential understanding of these deactivation processes thereby leading to materials and process improvements that enabled the commercialization effort. The objective of this project has been to identify a clear pathway to robust NOx after-treatment solutions for light-duty diesel engines. The project focussed on understanding and characterizing the NOx storage, release and conversion of existing NOx adsorber materials. The impact of sulfur on these processes was studied, with special attention given to methods of regenerating the catalyst in the presence of sulfur and the effects of these regeneration treatments on long-term catalyst durability. Model catalysts and more fully formulated catalysts were both studied. The goal of this project has been to identify and understand the deactivation mechanisms of LNT materials in order to provide more robust systems for diesel after-treatment systems that will meet the key emission standards for NOx. Furthermore, the project aimed to provide information critical to evaluating used systems to quantify and diagnose the extent of their degradation. This final report briefly highlights many of the technical accomplishments and documents the productivity of the program in terms of external recognition, peer-reviewed scientific publications (10 total), reports (7 total), and presentations (19 total).
Two primary NOx after-treatment technologies have been recognized as the most promising approaches for meeting stringent NOx emission standards for diesel vehicles within the Environmental Protection Agency’s (EPA’s) 2007/2010 mandated limits, NOx Storage Reduction (NSR) and NH3 selective catalytic reduction (SCR); both are, in fact being commercialized for this application. However, in looking forward to 2015 and beyond with expected more stringent regulations, the continued viability of the NSR technology for controlling NOx emissions from lean-burn engines such as diesels will require at least two specific, significant and inter-related improvements. First, it is important to reduce system costs by, for example, minimizing the precious metal content while maintaining, even improving, performance and long-term stability. A second critical need for future NSR systems, as well as for NH3 SCR, will be significantly improved higher and lower temperature performance and stability. Furthermore, these critically needed improvements will contribute significantly to minimizing the impacts to fuel economy of incorporating these after-treatment technologies on lean-burn vehicles. To meet these objectives will require, at a minimum an improved scientific understanding of the following things: i) the various roles for the precious and coinage metals used in these catalysts; ii) the mechanisms for these various roles; iii) the effects of high temperatures on the active metal performance in their various roles; iv) mechanisms for higher temperature NOx storage performance for modified and/or alternative storage materials; v) the interactions between the precious metals and the storage materials in both optimum NOx storage performance and long term stability; vi) the sulfur adsorption and regeneration mechanisms for NOx reduction materials; vii) materials degradation mechanisms in CHA-based NH3 SCR catalysts. The objective of this CRADA project between PNNL and Cummins, Inc. is to develop a fundamental understanding of the above-listed issues. Model catalysts that are based on literature formulations are the focus of the work being carried out at PNNL. In addition, the performance and stability of more realistic high temperature NSR catalysts, supplied by JM, are being studied in order to provide baseline data for the model catalysts that are, again, based on formulations described in the open literature. For this short summary, we will primarily highlight representative results from our recent studies of the stability of candidate high temperature NSR materials.
Lean NOx trap (LNT) catalysts represent a promising approach to meet increasingly stringent NOx emission regulations on diesel and other lean-burn engines. Pt material properties, including dispersion and particle size, are known to be important factors in determining NOx uptake performance, since Pt provides active sites for NO oxidation to NO2 necessary for storing NOx as nitrates, and for the reduction of nitrates to N2. In this work, the physicochemical properties of Pt in Pt-BaO/Al2O3 LNT catalysts, such as the Pt accessible surface area and particle size, were investigated by using various tools, such as irreversible volumetric H2 chemisorption, high resolution transmission electron microscopy (HRTEM), and X-ray diffraction (XRD), following successive reductive treatments at elevated temperatures. NOx uptake activities were also measured to establish a relationship between the properties of Pt and NOx storage following identical high-temperature reductive treatments. We find that the reductive treatments of Pt-BaO/Al2O3 lean NOx trap catalysts at temperatures up to 500 ºC promote a significant increase in NOx uptake explained, in part, by an induced close interaction between Pt and BaO phases in the catalyst, thus enabling facilitation of the NOx storage process.
In this project a combined experimental and theoretical approach was taken to advance our understanding of lean NOx trap (LNT) technology. Fundamental kinetics studies were carried out of model LNT catalysts containing variable loadings of precious metals (Pt, Rh), and storage components (BaO, CeO{sub 2}). The Temporal Analysis of Products (TAP) reactor provided transient data under well-characterized conditions for both powder and monolith catalysts, enabling the identification of key reaction pathways and estimation of the corresponding kinetic parameters. The performance of model NOx storage and reduction (NSR) monolith catalysts were evaluated in a bench scale NOx trap using synthetic exhaust, with attention placed on the effect of the pulse timing and composition on the instantaneous and cycle-averaged product distributions. From these experiments we formulated a global model that predicts the main spatio-temporal features of the LNT and a mechanistic-based microkinetic models that incorporates a detailed understanding of the chemistry and predicts more detailed selectivity features of the LNT. The NOx trap models were used to determine its ability to simulate bench-scale data and ultimately to evaluate alternative LNT designs and operating strategies. The four-year project led to the training of several doctoral students and the dissemination of the findings as 47 presentations in conferences, catalysis societies, and academic departments as well 23 manuscripts in peer-reviewed journals. A condensed review of NOx storage and reduction was published in an encyclopedia of technology.
We study the dynamics and selectivity of N 2 and N 2 O formation during and after the regeneration of a commercial NO x storage catalyst containing Pt, Pd, Rh, Ba on Ce/Zr, Mg/Al and Al oxides was studied with high-speed FTIR and SpaciMS analyzers. The lean/rich cycling experiments (60 s/5 s and 60 s/3 s) were performed in the temperature range 200–400°C, using H 2 , CO, and C 3 H 6 individually for the reduction of adsorbed NO x . Isotopically labeled 15 NO was employed in combination with Ar carrier gas in order to quantify the N 2 product by mass spectrometry. N 2 and N 2 O products were formed concurrently. The primary peaks appeared immediately after the rich-phase inception, and tailed off with breakthrough of the reductant front (accompanied by NH 3 product). Secondary N 2 and N 2 O peaks appeared at the rich-to-lean transition as a result of reactions between surface-deposited reductants/intermediates (CO, HC, NH 3 , -NCO) and residual stored NO x . At 200–300 °C, up to 30% of N 2 and 50% of N 2 O products originated from the secondary peaks. The N 2 O/N 2 selectivity ratio as well as the magnitude of secondary peaks decreased with temperature and duration of the rich phase. Among the three reductants, propene generated secondary N 2 peak up to the highest temperature. Lastly the primary N 2 peak exhibited a broadened shoulder aligned with movement of reduction front from the zone where both NO x and oxygen were stored to the NO x -free zone where only oxygen storage capacity was saturated. N 2 formed in the NO x -free zone originated from reaction of NH 3 with stored oxygen, while N 2 O formation in this zone was very low.
The structure-reactivity relationships of model BaO-based NOx storage/reduction catalysts were investigated under well controlled experimental conditions using surface science analysis techniques. The reactivity of BaO toward NO2, CO2, and H2O was studied as a function of BaO layer thickness [0\hBaO\30 monolayer (ML)], sample temperature, reactant partial pressure, and the nature of the substrate the NOx storage material was deposited onto. Most of the efforts focused on understanding the mechanism of NO2 storage either on pure BaO, or on BaO exposed to CO2 or H2O prior to NO2 exposure. The interaction of NO2 with a pure BaO film results in the initial formation of nitrite/nitrate ion pairs by a cooperative adsorption mechanism predicted by prior theoretical calculations. The nitrites are then further oxidized to nitrates to produce a fully nitrated surface. The mechanism of NO2 uptake on thin BaO films (\4 ML), BaO clusters (\1 ML) and mixed BaO/Al2O3 layers are fundamentally different: in these systems initially nitrites are formed only, and then converted to nitrates at longer NO2 exposure times. These results clarify the contradicting mechanisms presented in prior studies in the literature. After the formation of a nitrate layer the further conversion of the underlying BaO is slow, and strongly depends on both the sample temperature and the NO2 partial pressure. At 300 K sample temperature amorphous Ba(NO3)2 forms that then can be converted to crystalline nitrates at elevated temperatures. The reaction between BaO and H2O is facile, a series of Ba(OH)2 phases form under the temperature and H2O partial pressure regimes studied. Both amorphous and crystalline Ba(OH)2 phases react with NO2, and initially form nitrites only that can be converted to nitrates. The NO2 adsorption capacities of BaO and Ba(OH)2 are identical, i.e., both of these phases can completely be converted to Ba(NO3)2. In contrast, the interaction of CO2 with pure BaO results in the formation of a BaCO3 layer that prevents to complete carbonation of the entire BaO film under the experimental conditions applied in these studies. However, these ‘‘carbonated’’ BaO layers readily react with NO2, and at elevated sample temperature even the carbonate layer is converted to nitrates. The importance of the metal oxide/metal interface in the chemistry on NOx storage-reduction catalysts was studied on BaO(\1 ML)/Pt(111) reverse model catalysts. In comparison to the clean Pt(111), new oxygen adsorption phases were identified on the BaO/Pt(111) surface that can be associated with oxygen atoms strongly adsorbed on Pt atoms at the peripheries of BaO particles. A simple kinetic model developed helped explain the observed thermal desorption results. The role of the oxide/metal interface in the reduction of Ba(NO3)2 was also substantiated in experiments where Ba(NO3)2/O/Pt(111) samples were exposed to CO at elevated sample temperature. The catalytic decomposition of the nitrate phase occurred as soon as metal sites opened up by the removal of interfacial oxygen via CO oxidation from the O/Pt(111) surface. The temperature for catalytic nitrate reduction was found to be significantly lower than the onset temperature of thermal nitrate decomposition. We gratefully acknowledge the US Department of Energy (DOE), Office of Science, Division of Chemical Sciences, Geosciences, and Biosciences for the support of this work. The research described in this paper was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national user facility sponsored by the DOE Office of Biological and Environmental Research and located at the Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle under contract number DE-AC05-76RL01830.