Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NITROGEN 24”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 24

This evaluation of A = 24 has been updated from previous evaluations published in 1998En04, 1990En08, and 1978En02. Coverage includes properties of adopted levels and {gamma} rays, decay-scheme data (energies, intensities and placement of radiations), and cross reference entries. The following tables continue the tradition of showing the systematic relationships between levels in A = 24. These assignments are based on energy differences for states with the same J{sup {pi}} values, {gamma}-ray strengths, spectroscopic factors in analog single particle (T = 1) or two particle (T = 2) transfer reactions. Isospin is not a perfect quantum number and the adopted T-value may correspond to a small component in the wavefunction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of {alpha}-cluster potentials for the {sup 16}O+{sup 16}O fusion reaction and S factor

A joint analysis of the elastic-scattering angular distributions and fusion cross sections together with the S factor for the {sup 16}O+{sup 16}O system near and below the Coulomb barrier is reported. To describe these observables within the framework of the optical model, a comparative study of microscopic {alpha}-{alpha} double-folding clusters and phenomenological shallow potentials with surface-transparent imaginary parts is performed. Although the phenomenological Woods-Saxon type of shallow real potentials is unable to provide a consistent explanation of these data, the {alpha}-{alpha} double-folding cluster potential obtained by considering the {alpha}-cluster structure of {sup 16}O provides a considerable improvement. The {alpha}-{alpha} double-folding cluster potential also reproduces the normalized resonant energy states of {sup 32}S for the N=24 cluster band.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Single-particle levels of nuclei in the vicinity of the doubly magic nuclei {sub 20}{sup 48}Ca{sub 28} and {sub 28}{sup 56}Ni{sub 28}

Isotonic and isotopic dependences of single-particle energies of neutron and proton states in 20 {<=} Z {<=} 28 and 24 {<=} N {<=} 32 nuclei are investigated, these energies being determined by matching data on nucleon-stripping and nucleon-pickup reactions on the same nucleus. Regularities of the formation of the spectra of single-particle levels in Z, N = 20, 28 magic nuclei are demonstrated. A distinctive feature is found in the isotonic dependence of the energy of the 1 f{sub 5/2} neutron level, this feature being consistent with the assumption that j{sub >}-j{sub <} interaction is operative in nuclei. The single-particle energies calculated by using the potential of the dispersive optical model are found to be consistent with experimental data within their errors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Singlet Fission: Optimization of Chromophore Dimer Geometry

After a brief review of electronic aspects of singlet fission, we describe a systematic simplification of the frontier orbital (HOMO/LUMO) model of singlet fission and Davydov splitting in a pair of rigid molecules. In both instances, the model includes electron configurations representing local singlet excitation on either chromophore, charge transfer in either direction, and triplet excitation in both chromophores (biexciton). The resulting equations are simple enough to permit complete searches for local extrema of the square of the electronic matrix element and to evaluate the effect of intermolecular interactions on the exoergicity of singlet fission and on the biexciton binding energy in the six-dimensional space of rigid dimer geometries. The procedure is illustrated on results for the six best geometries for dimers of ethylene and of an indigoid heterocycle with 24 carbon, nitrogen, and oxygen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transcriptional analysis of the unicellular, diazotrophic cyanobacterium Cyanothece sp. ATCC 51142 grown under short day/night cycles

Cyanothece sp. strain ATCC 51142 is a unicellular, diazotrophic cyanobacterium that demonstrates extensive metabolic periodicities of photosynthesis, respiration and nitrogen fixation when grown under N2-fixing conditions. We have performed a global transcription analysis of this organism using 6 h light/dark cycles in order to determine the response of the cell to these conditions and to differentiate between diurnal and circadian regulated genes. In addition, we used a context-likelihood of relatedness (CLR) analysis with this data and those from two-day light/dark and light-dark plus continuous light experiments to better differentiate between diurnal and circadian regulated genes. Cyanothece sp. adapted in several ways to growth under short light/dark conditions. Nitrogen was fixed in every second dark period and only once in each 24 h period. Nitrogen fixation was strongly correlated to the energy status of the cells and glycogen breakdown and high respiration rates were necessary to provide appropriate energy and anoxic conditions for this process. We conclude that glycogen breakdown is a key regulatory step within these complex processes. Our results demonstrated that the main metabolic genes involved in photosynthesis, respiration, nitrogen fixation and central carbohydrate metabolism have strong (or total) circadian-regulated components. The short light/dark cycles enable us to identify transcriptional differences among the family of psbA genes, as well as the differing patterns of the hup genes, which follow the same pattern as nitrogenase genes, relative to the hox genes which displayed a diurnal, dark-dependent gene expression.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of nitrogen management in cultivation on the stability and microbial community of post-harvest Monoraphidium sp. algae biomass

Seasonal variation in algae biomass productivity is a significant obstacle to the economical production of fuels and chemicals from algae biomass. Long-term storage is necessary to guarantee a constant supply to a conversion facility and harvested microalgae biomass (20% solids) is subject to degradation immediately upon harvesting as a result of aerobic instability. Ensiling has been successfully used to preserve microalgal biomass, but biomass attributes that contribute to successful storage are poorly understood. Storage studies of Monoraphidium sp. biomass indicate a strong correlation between nitrogen management in algae cultivation and stability of post-harvest algae biomass in 30 days of anaerobic storage. Algae cultivated with periodic nitrogen addition stored poorly (> 20% loss, dry basis), while algae biomass from cultures that were allowed to continue growing after nitrogen depletion was more stable in storage (8% loss, dry basis). A follow-up study aimed at exploring the relationship between nitrogen management in cultivation and stability of post-harvest algae biomass stored Monoraphidium biomass cultivated in nitrogen deplete and nitrogen replete conditions, as well as with blends of each in varying ratios. Monoraphidium biomass from nitrogen replete cultivations experienced the largest degradation (24%, dry basis), while nitrogen deplete biomass experienced the least (10%, dry basis). Dry matter loss experienced during storage of blends was positively correlated with the amount of nitrogen replete biomass that a blend contained. Further, the composition of the post-storage algae microbial community was also strongly affected by cultivation conditions, with Clostridia species being more prevalent in stored biomass obtained from nitrogen replete cultivations. Nitrogen management has long been known to influence algae biomass productivity and biochemical composition; here, we demonstrate that it also strongly influences the stability of post-harvest algae biomass in anaerobic storage.

09 BIOMASS FUELS↗

Carbon Composite Microelectromechanical Systems (CMEMS)

Pyrolyzed carbon as a mechanical material is promising for applications in harsh environments. In this work, we characterized the material and developed novel processes for fabricating carbon composite micro-electromechanical systems (CMEMS) structures. A novel method of increasing Young's modulus and the conductivity of pyrolyzed AZ 4330 was demonstrated by loading the films with graphene oxide prior to pyrolysis. By incorporating 2 wt.% graphene stiffeners into the film, a 65% increase in Young's modulus and 11% increase in conductivity were achieved. By reactive ion etching pyrolyzed blanket AZ 50XT thick film photoresist, a high aspect ratio process was demonstrated with films >7.5um thick. Two novel multi-level, volume-scalable CMEMS processes were developed on 6" diameter wafers. Young's modulus of 23 GPa was extracted from nanoindentation measurements of pyrolyzed AZ 50XT films. The temperature-dependent resistance was characterized from room temperature to 500C and found to be nearly linear over this range. By fitting the results of self-heated bridges in an inert ambient, we calculated that the bridges survived to 1000C without failure. Transmission electron microscopy (TEM) results showed the film to be largely amorphous, containing some sub-micrometer sized graphite crystallites. This was consistent with our Raman analysis, which also showed the film to be largely sp 2 bonded. The calculated average density of pyrolyzed AZ 4330 films was 1.32 g/cm 2 . Thin level of disorder and the conductivity of thin film resistors were found to unchanged by 2Mrad gamma irradiation from a Co 60 source. Thin film pyrolyzed carbon resistors were hermetically sealed in a nitrogen ambient in 24-pin dual in-line packages (DIP's). The resistance was measured periodically and remained constant over 6 months' time.

36 MATERIALS SCIENCE↗

Distinct summer and winter bacterial communities in the active layer of Svalbard permafrost revealed by DNA- and RNA-based analyses

The active layer of soil overlaying permafrost in the Arctic is subjected to dramatic annual changes in temperature and soil chemistry, which likely affect bacterial activity and community structure. We studied seasonal variations in the bacterial community of active layer soil from Svalbard (78°N) by co-extracting DNA and RNA from 12 soil cores collected monthly over a year. PCR amplicons of 16S rRNA genes (DNA) and reverse transcribed transcripts (cDNA) were quantified and sequenced to test for the effect of low winter temperature and seasonal variation in concentration of easily degradable organic matter on the bacterial communities. The copy number of 16S rRNA genes and transcripts revealed no distinct seasonal changes indicating potential bacterial activity during winter despite soil temperatures well below -10°C. Multivariate statistical analysis of the bacterial diversity data (DNA and cDNA libraries) revealed a season-based clustering of the samples, and, e.g., the relative abundance of potentially active Cyanobacteria peaked in June and Alphaproteobacteria increased over the summer and then declined from October to November. The structure of the bulk (DNA-based) community was significantly correlated with pH and dissolved organic carbon, while the potentially active (RNA-based) community structure was not significantly correlated with any of the measured soil parameters. A large fraction of the 16S rRNA transcripts was assigned to nitrogen-fixing bacteria (up to 24% in June) and phototrophic organisms (up to 48% in June) illustrating the potential importance of nitrogen fixation in otherwise nitrogen poor Arctic ecosystems and of phototrophic bacterial activity on the soil surface.

Alphaproteobacteria↗

Elucidating Sorghum Biomass, Nitrogen and Chlorophyll Contents With Spectral and Morphological Traits Derived From Unmanned Aircraft System

Unmanned aircraft systems (UAS) provide an efficient way to phenotype crop morphology with spectral traits such as plant height, canopy cover and various vegetation indices (VIs) providing information to elucidate genotypic responses to the environment. In this study, we investigated the potential use of UAS-derived traits to elucidate biomass, nitrogen and chlorophyll content in sorghum under nitrogen stress treatments. A nitrogen stress trial located in Nebraska, USA, contained 24 different sorghum lines, 2 nitrogen treatments and 8 replications, for a total of 384 plots. Morphological and spectral traits including plant height, canopy cover and various VIs were derived from UAS flights with a true-color RGB camera and a 5-band multispectral camera at early, mid and late growth stages across the sorghum growing season in 2017. Simple and multiple regression models were investigated for sorghum biomass, nitrogen and chlorophyll content estimations using the derived morphological and spectral traits along with manual ground truthed measurements. Results showed that, the UAS-derived plant height was strongly correlated with manually measured plant height (r = 0.85); and the UAS-derived biomass using plant height, canopy cover and VIs had strong exponential correlations with the sampled biomass of fresh stalks and leaves (maximum r = 0.85) and the biomass of dry stalks and leaves (maximum r = 0.88). The UAS-derived VIs were moderately correlated with the laboratory measured leaf nitrogen content (r = 0.52) and the measured leaf chlorophyll content (r = 0.69) in each plot. The methods developed in this study will facilitate genetic improvement and agronomic studies that require assessment of stress responses in large-scale field trials.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of Low Temperature Nitrogen Baking on Superconducting Radio Frequency Cavities With Different Frequency

We report the rf performance of several single-cell superconducting radiofrequency cavities frequency ranging from 1.3-3.0 GHz after low temperature baking in nitrogen environment The cavities are treated at different temperature in the range of (120-160oC) for extended period of time (~24-48 hours) with nitrogen gas injection in the furnace. The improvement in Q0 with Q-rise in some case was observed when nitrogen gas was injected at elevated temperature (~250-290 oC) and held at the temperature range 120-200 oC without any degradation in accelerating gradient over the baseline performance. The temperature and time of baking play significant role in dependence of quality factor on accelerating gradient.

Khanal, B.↗

Forged Ingot Niobium Technology for Accelerator Applications and Scientific Frontiers

We report the rf performance of several single-cell superconducting radiofrequency cavities frequency ranging from 1.3-3.0 GHz after low temperature baking in nitrogen environment The cavities are treated at different temperature in the range of (120-160oC) for extended period of time (~24-48 hours) with nitrogen gas injection in the furnace. The improvement in Q0 with Q-rise in some case was observed when nitrogen gas was injected at elevated temperature (~250-290 oC) and held at the temperature range 120-200 oC without any degradation in accelerating gradient over the baseline performance. The temperature and time of baking play significant role in dependence of quality factor on accelerating gradient.

Khanal, B.↗

Integration of the DAYCENT Biogeochemical Model within a Multi-Model Framework

Agricultural residues are the largest near term source of cellulosic 13 biomass for bioenergy production, but removing agricultural residues sustainably 14 requires considering the critical roles that residues play in the agronomic system. 15 Determining sustainable removal rates for agricultural residues has received 16 significant attention and integrated modeling strategies have been built to evaluate 17 sustainable removal rates considering soil erosion and organic matter constraints. 18 However the current integrated model does not quantitatively assess soil carbon 19 and long term crop yields impacts of residue removal. Furthermore the current 20 integrated model does not evaluate the greenhouse gas impacts of residue 21 removal, specifically N2O and CO2 gas fluxes from the soil surface. The DAYCENT 22 model simulates several important processes for determining agroecosystem 23 performance. These processes include daily Nitrogen-gas flux, daily carbon dioxide 24 flux from soil respiration, soil organic carbon and nitrogen, net primary productivity, 25 and daily water and nitrate leaching. Each of these processes is an indicator of 26 sustainability when evaluating emerging cellulosic biomass production systems for 27 bioenergy. A potentially vulnerable cellulosic biomass resource is agricultural 28 residues. This paper presents the integration of the DAYCENT model with the 29 existing integration framework modeling tool to investigate additional environment 30 impacts of agricultural residue removal. The integrated model is extended to 31 facilitate two-way coupling between DAYCENT and the existing framework. The 32 extended integrated model is applied to investigate additional environmental 33 impacts from a recent sustainable agricultural residue removal dataset. The 34 integrated model with DAYCENT finds some differences in sustainable removal 35 rates compared to previous results for a case study county in Iowa. The extended 36 integrated model with DAYCENT also predicts that long term yields will decrease.

09 BIOMASS FUELS↗

Perovskite-type SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} compounds: Synthesis, crystal structure and optical properties

The synthesis, crystal structure, thermal stability and absorbance spectra of perovskite-type oxynitrides with the general formula SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} (x=0.05, 0.10, 0.20, 0.50, 0.80, 0.90, 0.95) have been investigated. Oxide samples were prepared by a polymerized complex synthesis route and post-treated under ammonia at 850 {sup o}C for 24 h to substitute nitrogen for oxygen. Synchrotron X-ray powder diffraction (XRD) evidenced that the mixed oxide phases were all transformed into oxynitrides with perovskite-type structure during a thermal ammonolysis. SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} with compositions x{<=}0.80 crystallized in a cubic and samples with x{>=}0.90 in a tetragonal structure. The Rietveld refinement indicated a continuous enlargement of the lattice parameters towards higher niobium content of the samples. Thermogravimetric analysis (TGA) and hotgas extraction revealed the dependence of the nitrogen incorporation upon the degree of niobium substitution. It showed that more nitrogen was detected in the samples with higher niobium content. Furthermore, TGA disclosed stability for all oxynitrides at T{<=}400 {sup o}C. Diffuse reflectance spectroscopy indicated a continuous decrease of the band gap's width from 3.24 eV (SrTi{sub 0.95}Nb{sub 0.05} (O,N){sub 3}) to 1.82 eV (SrTi{sub 0.05}Nb{sub 0.95}(O,N){sub 3}) caused by the increasing amount of nitrogen towards the latter composition. -- Graphical Abstract: The system SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} is described and the changes in crystal structure, nitrogen content and width of the band gap are discussed. Display Omitted Research highlights: {yields} Synthesis of SrTi{sub 1-x}Nb{sub x}(O,N){sub 3} perovskite-type oxynitrides via thermal ammonolysis. {yields} Co-substitution of Nb{sup 5+} enabled to adjust the amount nitrogen insertion. {yields} Tuning of the optical band gap through nitrogen.{yields} Changes of crystal structure from cubic to tetragonal with increasing niobium content.

36 MATERIALS SCIENCE↗

Systems Level Approaches to Understanding and Manipulating Heterocyst Differentiation in Nostoc Punctiforme: Sites of Hydrogenase and Nitrogenase Synthesis and Activity

Heterocysts are specialized cells that establish a physiologically low oxygen concentration; they function as the sites of oxygen-sensitive nitrogen fixation and hydrogen metabolism in certain filamentous cyanobacteria. They are present at a frequency of less than 10% of the cells and singly in a nonrandom spacing pattern in the filaments. The extent of differential gene expression during heterocyst differentiation was defined by DNA microarray analysis in wild type and mutant cultures of Nostoc punctiforme. The results in wild-type cultures identified two groups of genes; approximately 440 that are unique to heterocyst formation and function, and 500 that respond positively and negatively to the transient stress of nitrogen starvation. Nitrogen fixation is initiated within 24 h after induction, but the cultures require another 24 h before growth is reinitiated. Microarray analyses were conducted on strains with altered expression of three genes that regulate the presence and spacing of heterocysts in the filaments; loss of function or over expression of these genes increases the heterocyst frequency 2 to 3 fold compared to the wild-type. Mutations in the genes hetR and hetF result in the inability to differentiate heterocysts, whereas over expression of each gene individually yields multiple contiguous heterocysts at sites in the filaments; they are positive regulatory elements. Mutation of the gene patN results in an increase in heterocysts frequency, but, in this case, the heterocysts are singly spaced in the filaments with a decrease in the number of vegetative cells in the interval between heterocysts; this is a negative regulatory element. However, over expression of patN resulted in the wild-type heterocyst frequency and spacing pattern. Microarray results indicated HetR and HetF influence the transcription of a common set of about 395 genes, as well as about 350 genes unique to each protein. HetR is known to be a transcriptional regulator and HetF is predicted to be a protease, perhaps operating thorough stability of HetR; thus, the influence of HetF on transcription of a unique set of genes was unanticipated. These two proteins are also found in non-heterocyst-forming filamentous cyanobacteria and the results have implications on their other physiological role(s). The PatN protein is unique to heterocyst-forming cyanobacteria. Cytological analysis indicated PatN is present in only one of the two daughter cells following division, but is present in both cell less than 8 h after division. Microarray analysis indicated only five genes were differentially transcribed in the patN mutant compared to the wild type; three up-regulated genes that are known to influence heterocyst differentiation and two down-regulated genes that have an unassigned function. Mutational analyses indicted the two down-regulated genes do not have a distinct role in heterocyst differentiation. Thus, PatN only indirectly impacts transcription. These databases provide lists of differentially transcribed genes involved in nitrogen starvation and cellular differentiation that can be mined for detailed genetic analysis of the regulation of heterocyst formation and function for subsequent photo-biohydrogen production.

59 BASIC BIOLOGICAL SCIENCES↗

S3I-201 ameliorates tubulointerstitial lesion of the kidneys in MRL/lpr mice

Highlights: • STAT1 and STAT3 were activated in MRL/lpr mice. • MRL/lpr mice accompanied tubulointerstitial lesion. • S3I-201 improved tubulointerstitial lesion in MRL/lpr mice. It is high incidence of tubulointerstitial lesion (TIL) in lupus nephritis (LN) and TIL can affect the prognosis of patients with LN. Signal transducer and activator of transcription (STAT) 3 was activated in LN and STAT3 inhibition could delay the onset of LN. Here, we evaluated the role of a well-known STAT3 inhibitor, S3I-201, on TIL in lupus nephritis. STAT3 was activated in MRL/lpr mice (a mouse model of lupus nephritis), and treatment with S3I-201 inhibited the activation of it. The level of 24-h urine protein and nitrogen urea increased in MRL/lpr mice and adminstration of S3I-201 reduced the level of urinary protein. In addition, S3I-201 attenuated the expression of α-smooth muscle actin (α-SMA), Fibronectin (FN) proteins, as well as the expression of monocyte chemotactic factor-1 (MCP-1) and intercellular adhesion molecule (ICAM-1). However, the expression of E-cadherin improved when treatment with S3I-201. These results revealed that the activation of STAT3 mediates tubulointerstitial lesion in mice with LN. S3I-201, by suppressing STAT3 activity, has therapeutic effect in lupus nephritis.

60 APPLIED LIFE SCIENCES↗

Robotic sample changers for macromolecular X-ray crystallography and biological small-angle X-ray scattering at the National Synchrotron Light Source II

In this work, we present two robotic sample changers integrated into the experimental stations for the macromolecular crystallography (MX) beamlines AMX and FMX, and the biological small-angle scattering (bioSAXS) beamline LiX. They enable fully automated unattended data collection and remote access to the beamlines. The system designs incorporate high-throughput, versatility, high-capacity, resource sharing and robustness. All systems are centered around a six-axis industrial robotic arm coupled with a force torque sensor and in-house end effectors (grippers). They have the same software architecture and the facility standard EPICS-based BEAST alarm system. The MX system is compatible with SPINE bases and Unipucks. It comprises a liquid nitrogen dewar holding 384 samples (24 Unipucks) and a stay-cold gripper, and utilizes machine vision software to track the sample during operations and to calculate the final mount position on the goniometer. The bioSAXS system has an in-house engineered sample storage unit that can hold up to 360 samples (20 sample holders) which keeps samples at a user-set temperature (277 K to 300 K). The MX systems were deployed in early 2017 and the bioSAXS system in early 2019.

36 MATERIALS SCIENCE↗

Laboratory-Scale Coal-Derived Graphene Process (Final Report)

The Energy & Environmental Research Center (EERC) conducted a laboratory-scale coal-derived graphene (CDG) project focused on developing a technological process for making graphene from four U.S. domestic coal or coal wastes, including lignite from North Dakota, subbituminous coal from Wyoming, bituminous coal from Utah, and anthracite from Pennsylvania. The project was divided into two performance or budget periods (BPs), with BP1 comprising the up-front laboratory experiments to make graphene materials from coal beginning on May 1, 2020, to April 30, 2022. BP2 was conducted from May 1, 2022, to April 30, 2023, and was focused on analyzing the CDG process economic feasibility and the technical gaps for technological scale-up and commercialization. During this project, a few different coal-derived high-value products have been demonstrated, including graphite, graphene oxide (GO), reduced graphene oxide (rGO), and graphene quantum dots (GQDs). A new graphite microstructure was discovered and named “croissant graphite” because of the exterior morphological and textural resemblance to croissant food items sold in commercial groceries stores. The new graphite structure and the associated preparation from coal or coal waste feedstocks has been the subject of a U.S. patent application. The systematic experimental processes involving coal cleaning, upgrading, and conversion to high-value carbon products culminated into a developed upgraded coal-to-products (UCP) technology that is being pursued for potential fast-track commercialization, if funding is available. It is envisioned that commercialization of the UCP technology would increase consumption of U.S. domestic coals or coal wastes to make environmentally sustainable high-value products for the electronics industry, high-energy-storage applications, and clean energy technologies such as electric vehicle (EV) lithium-ion batteries (LIBs), for which graphite has become a critical mineral commodity. Croissant graphite microstructures, when observed by field emission scanning electron microscopy (FESEM), display wavy surface morphology and often grow from a base that is made of graphitized particles with honeycomb-like layers, which are believed to be graphene layers. While more studies are needed to fully ascertain the mechanisms of the croissant graphite microstructure formation, it is postulated that their growth may begin from curling of the graphene sheets into ribbon-like structures, and continuous growth and densification of the ribbon-like structures forms croissant microstructures. Additional studies are ongoing to evaluate the electrochemical performance of croissant graphite for LIB applications and to determine the experimental conditions necessary to tune on/off croissant formation so that it can be either optimized or suppressed depending on performance evaluation results. In addition to the discovery of croissant graphite, the graphitization process from the four coal ranks in general was successful. X-ray diffraction (XRD) analysis showed that the degree of graphitization (DoG) ranged from 12% to 80% in an early sample set, and further optimization on lignite coal produces a DoG of about 92%, which was spectacular to see as lignite is the lowest-rank coal. Thus, it is expected that the graphitization performance for higher-rank coals will be similar or better when optimized as well. The coal-derived graphite was used to make GO and rGO. Analytical characterization, e.g., by methods such as Raman spectroscopy, XRD, Fourier transform infrared (FTIR) spectroscopy and FESEM, showed that the sequence of converting the coal to graphite, exfoliating it to GO, and then chemically reducing the GO to rGO was successful. Although coal naturally contains aromatic compounds and some relatively small-sized condensed aromatic units, it does not contain graphene sheets. In the UCP process, the aromatic domains in the coals, particularly low-rank coals, are concentrated and condensed further into graphene sheets, which are ordered into a 3D stack during graphitization. The synthesized graphite is then unpacked by methods such as exfoliation to various graphene products. GQDs were synthesized from all four coal types, and their optical properties were demonstrated to be tunable by the coal precursor preprocessing treatments. In all four coal types, enhanced optical properties were observed for the produced GDQs with incremental improvements made to the coal precursors. GQDs produced from raw coal samples displayed lower ultraviolet–visible (UV–Vis) spectroscopy absorbance intensity compared to those obtained from cleaned and upgraded coal residues. The photoluminescence (PL) intensities also varied with pretreatment conditions and with the concentration of GQDs in aqueous solutions. GQDs obtained from anthracite show longer emission wavelengths and can be excited by visible light as opposed to GQDs derived from the other coal ranks. UV fluorescence 3D maps and spectra revealed that the emission wavelength at which the GQDs solutions display the highest intensity was slightly redshifted based on the coal precursor pretreatments. In low-rank coal (lignite and subbituminous) samples, two clusters were observed in the maps for GQDs, which may suggest that there are potentially two types of fluorophores in solution or two main size populations. The ability to tune the properties of GQDs based on processing methods can be exploited to make GQDs for various optical display or optoelectronics applications. The results also highlight the importance of removing coal-borne impurities to improve the quality of the coal precursor for preparation of graphene products. Coal and/or coal wastes preprocessing methods were developed and applied to clean and upgrade the coal precursors prior to graphitization and subsequent conversion to graphene products. The preprocessing methods involve high specific-gravity separations, mineral acid cleaning (no hydrofluoric acid), and subsequent upgrading by reducing the coal-borne heteroatom (nitrogen, sulfur, and oxygen) content using proprietary chemical agents. Analytical characterization revealed that the preprocessing steps were successful, with ash reductions that range from 38% to 80% and residual ash content that was below the 5 wt% initial target. Based on proximate and ultimate analysis, the heteroatom reduction reactions produced upgraded coal residues with the oxygen content reduced by 8% to 24%, with additional reductions in the nitrogen and sulfur contents. An initial assessment of the waste streams from the UCP process shows very small to negligible environmental impact due to CO 2 , NO x , and SO x because most process steps are performed under inert atmosphere with argon. Consequently, reactive oxygen environments that tend to create these species are avoided. The inorganic and potentially hazardous species are released into aqueous waste streams that are easy to handle for proper disposal. The liquid waste streams were found to contain low-level concentrations of rare-earth elements (REEs), which could be concentrated and recovered as value-added by-products. Additionally, the volatile and gaseous fractions from carbonization and heat treatment contain useful organic compounds that can also be recovered as potential valuable by-products. Thus, the UCP technology is considered an environmentally sustainable and promising emerging technology for making high-value products from coal and coal wastes, with potential additional value-added by-products. Analysis of potential markets for the coal-derived carbon products shows a strong demand in both niche market sectors and across a wide variety of other industrial sectors. Graphite is currently considered a critical mineral commodity that has a large and growing demand in the LIB industry for EV applications. Based on data from Fortune Business Insights (2022) and Marketwatch (2023) reports, the average global graphite market is projected to reach about 33 billion by 2028, growing at a compound annual growth rate (CAGR) of about 7%, with much of this growth expected to be in the LIB industry. GO and rGO have strong market potentials in various application areas, such as coatings for anticorrosion, anti-icing, and antimicrobial protection, thermal barriers, wear resistance, sensors, additive manufacturing such as 3D inks, and others. GQDs are the emerging key player in the bioimaging, photovoltaics, and light-emitting diodes (LEDs) applications, with the potential to replace traditional semiconductor quantum dots (SQDs), which are based on metallic systems that are more toxic and more expensive. Biomedical applications of GQDs are becoming more attractive because of low to no toxicity and extremely low cost compared to SQDs. The major challenges for scale-up and commercialization of coal-derived carbon products such as graphene vary from the inherent attributes of graphene itself to reluctance to accept graphene in new manufacturing processes because of the uncertainty of the unknown. The 2D nature of graphene materials with a thickness of one atom presents significant challenges to proper handling/processing, and process scale-up becomes difficult because it requires high-end, expensive equipment, even for routine handling and analysis for quality assurance and control. Pristine graphene can also be extremely difficult to work into other matrices, thus hindering downstream processibility, especially at large scale. Currently, the cost of graphene and graphene products is still high and presents an economic risk that tends to slow down investment in scaling up emerging technologies. The lack of a standard for graphene materials for quality assurance and quality control poses a great challenge not only for the markets but also for commercialization efforts. A first-look economic feasibility analysis of the UCP technology provided valuable information that suggests the UCP process would be feasible, especially when it is scaled to a pilot scale and could be more competitive at the full scale. Graphitization was found to be the most energy-consuming and most capital-intensive step in the overall process. In small laboratory- and bench-scale experiments, labor is a significant contributor to the total process costs. Although these energy, capital, and labor constraints contribute to a higher selling price for the product, a preliminary economic model suggests that the process would be feasible at large scale when the process is fully integrated, optimized, and automated.

01 COAL, LIGNITE, AND PEAT↗

Nitrogen derived from Combined Algal Processing supports algae cultivation for biofuels

Algae biomass, a biofuel feedstock with potential to reduce global CO 2 emissions, is currently too expensive Nitrogen, a significant input and life cycle cost, requires research on recycling and additional sources to reduce costs. Integral to nitrogen recycling is the knowledge of actual nitrogen requirements in outdoor ponds, thus data from the Unified Field Studies of the Algae Testbed Public-Private Partnership was analyzed. The data showed that Nannochloropsis oceanica used 14–24 mg/L NH 4 + per harvest cycle for robust growth. Nitrogen recycled directly from the algae conversion process will likely be the primary source of nitrogen for algae cultivation. Harvested algae can be fractionated via Combined Algal Processing (CAP), where algae are pretreated, fermented, and the fuel feedstocks (e. g. ethanol, lipids) are removed leaving a nitrogen rich slurry. Chlorella vulgaris grew robustly in nitrogen-free media supplemented with CAP residues through 4 harvest cycles with no inhibition. The amount of nitrogen as free ammonium available for recycling directly without further processing was insufficient (~4% of total needed), thus the nitrogen fixing bacteria, Azotobacter vinelandii, was investigated as a means for increasing ammonium concentration in CAP residues. This organism was shown to be proficient at growth on sugars liberated from algae biomass during pretreatment and sustained algae growth using A. vinelandii supernatants was also demonstrated. Using Azotobacter to increase ammonium concentrations on-site using an inexpensive biological process to generate the necessary ammonium for outdoor algae cultivation improves sustainability of algae biofuels by avoiding the energy intensive steps of typical ammonium production and transport. Furthermore, these results show that byproducts of algae conversion begin to close nitrogen demand and, with further supplementation by diazotrophic bacteria or protein hydrolysis, may completely replace current energyintensive and costly industrial nitrogen sources offering a path to increased economic feasibility and improved life cycle analysis of algae-based biofuels.

09 BIOMASS FUELS↗