Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIOBIUM 96”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Design, fabrication, RF test at 2 K of 1050MHz, β=0.49 single cell large and fine grain niobium cavity

BARC is developing a technology for the accelerator driven subcritical system (ADSS) that will be mainly utilized for the transmutation of nuclear waste and enrichment of U233. Design and prototyping of a superconducting medium velocity cavity has been taken up as a part of the ADSS project. The cavity design for {beta} = 0.49, f = 1050 MHz has been optimized to minimize the peak electric and magnetic fields, with a goal of 5 MV/m of accelerating gradient at a Q > 5 x 10{sup 9} at 2 K. After the design optimization, two single cell cavities were fabricated from polycrystalline (RRR > 200) and large grain (RRR > 96) Niobium material. The cavities have been tested at 2 K in a vertical cryostat at Jefferson Lab and both achieved the performance specifications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-spin states in {sup 96,97}Nb

The high-spin level structures of the {sup 96,97}Nb isotopes have been studied. The isotopes were produced in the fission of the compound systems formed in two heavy-ion-induced reactions, {sup 24}Mg (134.5 MeV) + {sup 173}Yb and {sup 23}Na (129 MeV) + {sup 176}Yb. Gamma-ray spectroscopy was accomplished with the Gammasphere array. High-spin states are observed for the first time in both isotopes with excitation energies up to 5.2 and 6.6 MeV in {sup 96,97}Nb, respectively. The coupling of the odd proton occupying the g{sub 9/2} orbital to the yrast states in the subshell closure nucleus of {sup 96}Zr can account for the first excited states of {sup 97}Nb. A comparison with the first excited states in {sup 95}Zr is also attempted. The addition of a neutron hole in {sup 96}Nb results in a much more fragmented level scheme.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 96

Experimental data on ground- and excited-state properties for all known nuclei with mass number A = 96 have been compiled and evaluated. States populated in radioactive decay, as well as in nuclear reactions, have been considered. For these nuclei, level and decay schemes, as well as tables of nuclear properties, are presented. This work supersedes the 1993 evaluation by L.K. Peker (1993Pe02). In summary, three isomers were identified in {sup 96}Ag (2003Ba39,1997Gr02), even though the relative energies were not established. In {sup 96}Ru a nuclear fluorescence experiment (2005Li59) determined the spin, branching ratios and transition strengths of dipole excitations; high-spin level properties were reported by 2000Kh02 and 2002Kl07. High spin levels in {sup 96}Tc were studied in 2001Bu19. For {sup 96}Mo, there are new high-spin data (2000Ch42), as well as low-spin levels produced in (n,n{sup '}{gamma}) (2007Le05) and ({gamma},{gamma}{sup '}) (2004Fr30). High spin data (2005Pa48) were obtained for {sup 96}Zr using heavy-ion induced fission. For {sup 96}Sr, new levels were deduced using alpha-induced (2005Pa48) and spontaneous fission. The decay of a (10-) isomer in {sup 96}Rb was studied by 2005Pi13. Several new mass measurements for neutron rich nuclides have been published, which were used to obtain Q-values and separation energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modeling a Nb3Sn Cryounit in GPT at UITF

Nb₃Sn is a prospective material for future superconducting RF (SRF) accelerator cavities. The material can achieve higher quality factors, higher temperature operation and potentially higher accelerating gradients (E_{acc} 96 MV/m) compared to conventional niobium. In this work, we performed modeling of the Upgraded Injector Test Facility (UITF) at Jefferson Lab utilizing newly constructed Nb₃Sn cavities. We studied the effects of the buncher cavity and varied the gun voltages from 200-500 keV. We have calibrated and optimized the SRF cavity gradients and phases for the Nb₃Sn five-cell cavities energy gains with the framework of General Particle Tracer (GPT). Our calculations show the beam goes cleanly through the unit. There is full energy gain out of the second SRF cavity but not from the first SRF cavity due to non-relativistic phase shifts.

Pokharel, S.↗

Crystal and magnetic structures of Cr{sub 1∕3}NbSe{sub 2} from neutron diffraction

Neutron diffraction measurements of the Cr intercalated niobium diselenide Cr{sub 1∕3}NbSe{sub 2} together with magnetization measurements have revealed that this compound exhibits ferromagnetic ordering below T{sub C} = 96 K unlike a chiral helimagnetic order observed in the sulfide compound Cr{sub 1∕3}NbS{sub 2}. As derived from neutron diffraction data, the Cr magnetic moments μ{sub Cr} = 2.83 ± 0.03 μ{sub B} in Cr{sub 1∕3}NbSe{sub 2} are aligned within basal plane. The discrepancy in the magnetic states of Cr{sub 1∕3}NbS{sub 2} and Cr{sub 1∕3}NbSe{sub 2} is ascribed to the difference in the preferential site occupation of Cr ions in crystal lattices. In Cr{sub 1∕3}NbSe{sub 2}, the Cr ions are predominantly distributed over 2b Wyckoff site, which determines a centrosymmetric character of the crystal structure unlike Cr{sub 1∕3}NbS{sub 2}, where the Cr ions are mainly located in 2c position and the crystal structure is non-centrosymmetric.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron Tunneling and X-Ray Photoelectron Spectroscopy Studies of the Superconducting Properties of Nitrogen-Doped Niobium Resonator Cavities

Scanning tunneling microscopy and spectroscopy and X-ray photoelectron spectroscopy (XPS) have been used to investigate the differences between the surface electronic structures and chemical structure of typically prepared and N-doped Nb cutouts from superconducting radio frequency (SRF) cavities. The goal of this work is to get insights into the fundamental physics and materials mechanisms behind the striking decrease of the surface resistance with the radiofrequency magnetic field, which has been observed by many groups on N-doped Nb cavities. In particular, we address the effects of N-doping on the superconducting properties at the surface of SRF cavities. XPS measurements reveal a significantly more oxidized Nb 3d states on the N-doped Nb surfaces which is confirmed by tunneling spectroscopy measurements. Analysis of the tunneling spectra in the framework of a recent model (A. Gurevich and T. Kubo Phys. Rev. B 96, 184515 (2017)) shows that the N-doping greatly reduces local distribution of superconducting properties on the surface, causes a significant shrinkage of the metallic suboxide and changes the contact resistance between the metallic suboxide and the bulk niobium toward an optimum value, resulting in a lower surface resistance. Combination of these factors enables one to effectively tune the density of states at the surface and to reveal the decrease of the surface resistance with the radio frequency field which follows from the BCS theory. A slightly reduced average gap and a smaller coherence length, revealed by tunneling spectroscopy in the vortex cores, have been found in the N-doped Nb samples compared to typically prepared Nb samples, indicating a stronger impurity scattering caused by nitrogen doping in a moderately disordered material.

Lechner, Eric M.↗

Experimental study of neutron-rich nuclei near the N = 82 closed shell using the {sub 40}{sup 96}Zr+{sub 50}{sup 124}Sn reaction with GASP and PRISMA-CLARA arrays

In this contribution an experimental study of the deep-inelastic reaction {sub 40}{sup 96}Zr+{sub 50}{sup 124}Sn at 530 MeV, using the GASP and PRISMA-CLARA arrays, is presented. The experiments populate a wealth of projectile-like and target-like binary fragments, in a large neutron-rich region around N ≥ 50 and Z ≈ 40. Preliminary results on the study of the yrast and near-yrast states for {sup 95}Nb will be shown, along with a comparison of the experimental yields obtained in the experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Efficient Workflows for Curation of Heterogeneous Data Supporting Modeling of U-Nb Alloy Aging

These are slides from a presentation summarizing a graduate research associate's summer project. The following topics are covered in these slides: data challenges in materials, aging in U-Nb Alloys, Building an Aging Model, Different Phase Trans. in U-Nb, the Challenge, Storing Materials Data, Example Data Source, Organizing Data: What is a Schema?, What does a "XML Schema" look like?, Our Data Schema: Nice and Simple, Storing Data: Materials Data Curation System (MDCS), Problem with MDCS: Slow Data Entry, Getting Literature into MDCS, Staging Data in Excel Document, Final Result: MDCS Records, Analyzing Image Data, Process for Making TTT Diagram, Bottleneck Number 1: Image Analysis, Fitting a TTP Boundary, Fitting a TTP Curve: Comparable Results, How Does it Compare to Our Data?, Image Analysis Workflow, Curating Hardness Records, Hardness Data: Two Key Decisions, Before Peak Age? - Automation, Interactive Viz, Which Transformation?, Microstructure-Informed Model, Tracking the Entire Process, General Problem with Property Models, Pinyon: Toolkit for Managing Model Creation, Tracking Individual Decisions, Jupyter: Docs and Code in One File, Hardness Analysis Workflow, Workflow for Aging Models, and conclusions.

36 MATERIALS SCIENCE↗

Precipitation and mechanical properties of Nb-modified ferritic stainless steel during isothermal aging

The influence of isothermal aging on precipitation behavior and mechanical properties of Nb-modified ferritic stainless steel was investigated using Thermo-calc software, scanning electron microscopy and transmission electron microscopy. It was observed that TiN, NbC and Fe{sub 2}Nb formed in the investigated steel and the experimental results agreed well with the results calculated by Thermo-calc software. During isothermal aging at 800 deg. C, the coarsening rate of Fe{sub 2}Nb is greater than that of NbC, and the calculated average sizes of NbC and Fe{sub 2}Nb of the aged specimen agreed with the experimental results. In addition, the tensile strength and micro-hardness of the ferritic stainless steel increased with increased aging time from 24 h to 48 h. But aging at 800 deg. C for 96 h caused the coarsening of the precipitation, which led to a decrease of tensile strength and micro-hardness.

36 MATERIALS SCIENCE↗

Role of angular momentum in the production of complex fragments in fusion and quasifission reactions

The influence of angular momentum on the competition between complete fusion followed by the decay of compound nucleus and quasifission channels is treated within the dinuclear system model. The charge distributions of the products in the reactions {sup 28}Si+{sup 96}Zr, {sup 4}He+{sup 130}Te, and {sup 40}Ca+{sup 82}Kr are predicted at bombarding energies above the Coulomb barrier. The results of calculations for the reactions {sup 93}Nb+{sup 9}Be,{sup 12}C,{sup 27}Al; {sup 84}Kr+{sup 27}Al; {sup 86}Kr+{sup 63}Cu; {sup 139}La+{sup 12}C,{sup 27}Al; and {sup 45}Sc+{sup 65}Cu are compared with the available experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New routes for production of proton-rich Tc isotopes

Proton-rich Tc radionuclides have been identified as potential candidates for specific clinical and biological applications in the last decade. So far, these radionuclides have been produced either by proton-induced reaction on Mo targets or {alpha}-particle-induced reaction on Nb targets. This article lightens two heavy-ion-induced production routes of {sup 93,94,95,96}Tc radionuclides through {sup 7}Li+{sup nat}Zr and {sup 9}Be+{sup nat}Y reactions and provides important cross-sectional information in the projectile energy ranges 37-45 MeV and 30-48 MeV, respectively. Excitation functions of those reactions have been measured using the stacked-foil technique followed by the off-line {gamma}-spectrometric studies. Measured cross-sectional data have been interpreted comparing theoretical predictions of the two nuclear reaction model codes PACE-II and ALICE91. Experimental cross sections agreed with the theory. Measured production cross sections of {sup 94,95}Tc have been compared with those produced from the {alpha}+{sup 93}Nb reaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of duration of 120 oC baking on the performance on superconducting radio frequency niobium cavities

Over the last decade much attention was given in increasing the quality factor of superconducting radio frequency (SRF) cavities by impurity doping. Prior to the era of doping, the final cavity processing technique to achieve the high accelerating gradient includes the ?in situ? low temperature baking of SRF cavities at temperature ~ 120 oC for several hours. Here, we present the results of a series of measurements on 1.3 GHz TESLA shape single-cell cavities with successive low temperature baking at 120 oC up to 96 hours. The experimental data were analyzed with available theory of superconductivity to elucidate the effect of the duration of low temperature baking on the superconducting properties of cavity materials as well as the rf performance. In addition, the rf loss related to the trapping of residual magnetic field refereed as flux trapping sensitivity was measured with respect to the duration of 120 oC bake.

Khanal, B. D.↗

Performance characteristics of narrow linewidth fiber laser pumped mid-IR difference frequency mixing light source for methane detection

A high-power, narrow-linewidth Yb fiber laser with a fiber Bragg grating (FBG) pumped difference frequency generation (DFG) in a periodically poled lithium niobate (PPLN) crystal was investigated in detail. A mid-IR power of approximately 2.3 microW at 3.3 micrometers with a slope efficiency of 0.85 mW/W2 was achieved. A Doppler-broadened absorption spectrum of CH4 at 3038.497 cm-1 (3.2911 micrometers) was obtained with a 0.1-m long-gas cell at a pressure of 133 Pa. The linewidth of the DFG source was evaluated to be less than 96 MHz from the observed spectral linewidth. Real-time monitoring of CH4 (approximately 1.78 ppm) in ambient air in a multipass cell which has an optical path length of 10 m was also demonstrated.

Non-NASA Center↗

Insight to the Duration of 120 °C Baking on the Performance of SRF Niobium Cavities

Low-temperature baking at 100 °C - 140 °C in ultra-high vacuum for several hours is the final cavity processing technique to achieve the highest accelerating gradient cavity by eliminating the high field Q-slope, typically on cavities made of high purity fine grain niobium and subjected to electropolishing. The temperature and duration of baking control the onset of the high field Q-slope and overall quality factor over the baseline measurements. The increase in quality factor is generally related to the reduction in the temperature-dependent surface resistance, which refers to BCS surface resistance due to the reduction in the electronic mean free path and elimination of high field Q-slope is still being actively investigated. Here, we present the results of a series of measurements on 1.3 GHz TESLA shape single-cell cavities with successive low-temperature baking at 120 °C up to 96 hours. The rf loss related to the trapping of residual magnetic field refer to flux trapping sensitivity was measured with respect to the duration of 120 °C bake.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} alloy in different structural states

This paper reports the observation of the clear Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} bulk metallic glass. The Invar effects of (Fe{sub 71.2}B{sub 24}Y{sub 4.8}){sub 96}Nb{sub 4} alloys in different structural states are also investigated in situ through cyclic thermal dilation tests at different cyclic temperatures. The results show that these Invar effects are strengthened in the relaxation amorphous state, weakened in the nanocrystalline state, and absent in the complete crystalline state. X-ray diffraction and Moessbauer spectroscopy demonstrate that the structural influences on Invar effects can be explained by the different local atomic arrangements around Fe atoms in different structural states.

36 MATERIALS SCIENCE↗

Phase chemistry of the system Nb–Rh–O

Phase relations in the system Nb–Rh–O at 1223 K were investigated by isothermal equilibration of eleven compositions and analysis of quenched samples using OM, XRD, SEM and EDS. The oxide phase in equilibrium with the alloy changes progressively from NbO to NbO₂, NbO₂.₄₂₂ and Nb₂O 5–x with increasing Rh. Only one ternary oxide NbRhO₄ with tetragonal structure (a=0.4708 nm and c=0.3017 nm) was detected. It coexists with Rh and Nb₂O₅. The standard Gibbs energy of formation of NbRhO₄ from its component binary oxides measured using a solid-state electrochemical cell can be represented by the equation; ΔG f,ox o (J/mol)=-38,350+5.818×T(±96) Constructed on the basis of thermodynamic information of the various alloy and oxide phases are oxygen potential diagram for the system Nb–Rh–O at 1223 K and temperature–composition diagrams at constant partial pressures of oxygen. - Graphical abstract: Isothermal section of ternary phase diagram for the system Nb–Rh–O at 1223 K. Highlights: • First complete isothermal section for the system Nb–Rh–O has been established. • An electrochemical cell is used to measure the thermodynamic properties of NbRhO₄. • Oxygen potential diagram at 1223 K is computed from thermodynamic data. • Temperature–composition diagrams at constant oxygen partial pressures. • A complete thermodynamic characterization of the system Nb–Rh–O is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constant permeability of (Fe{sub 0.75}B{sub 0.20}Si{sub 0.05}){sub 96}Nb{sub 4} bulk metallic glass prepared by B{sub 2}O{sub 3} flux melting and Cu-mold casting

The effect of B{sub 2}O{sub 3} flux melting on the soft magnetic properties of (Fe{sub 0.75}B{sub 0.20}Si{sub 0.05}){sub 96}Nb{sub 4} bulk metallic glass prepared by casting has been investigated. Ring-shaped bulk specimens that were prepared by B{sub 2}O{sub 3} flux melting and Cu-mold casting (fluxed specimens) show a flat hysteresis curve, indicating a good linear relationship between the magnetic induction and the applied magnetic field. Although the permeability of the fluxed specimens is lower than that of the specimens prepared by conventional Cu-mold casting by one order of magnitude, their coercivities are almost same. These results show that it is possible to develop a new soft magnetic material that exhibits constant permeability with low core loss.

36 MATERIALS SCIENCE↗

FeCoSiBNbCu bulk metallic glass with large compressive deformability studied by time-resolved synchrotron X-ray diffraction

By adding 0.5 at. % Cu to the strong but brittle [(Fe{sub 0.5}Co{sub 0.5}){sub 0.75}Si{sub 0.05}B{sub 0.20}]{sub 96}Nb{sub 4} bulk metallic glass, fully amorphous rods with diameters up to 2 mm were obtained. The monolithic samples with 1 mm diameter revealed a fracture strain of 3.80% and a maximum stress of 4143 MPa upon compression, together with a slight work-hardening behavior. SEM micrographs of fractured samples did neither reveal any shear bands on the lateral surface nor the typical vein patterns which characterize ductile fracture. However, some layers appear to have flowed and this phenomenon took place before the brittle final fracture. An estimate of the temperature rise ΔT in the shear plane gives 1039 K, which is large enough to melt a layer of 120 nm. The overall performance and the macroscopic plastic strain depend on the interaction between cleavage-like and viscous flow-like features. Mechanical tests performed in-situ under synchrotron radiation allowed the calculation of the strain tensor components, using the reciprocal-space data and analyzing the shift of the first (the main) and the second broad peak positions in the X-ray diffraction patterns. The results revealed that each atomic shell may have a different stiffness, which may explain the macroscopic compressive plastic deformation. Also, there were no signs of (nano) crystallization induced by the applied stress, but the samples preserve a monolithic amorphous structure until catastrophic failure occurs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗