Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEODYMIUM 140”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A=140☆

The 2006 evaluation of A=140 was updated using experimental results published before November 2018 from the various reaction and decay studies leading to the nuclei {sup 140}Sb, {sup 140}Te, {sup 140}I, {sup 140}Xe, {sup 140}Cs, {sup 140}Ba, {sup 140}La, {sup 140}Ce, {sup 140}Pr, {sup 140}Nd, {sup 140}Pm, {sup 140}Sm, {sup 140}Eu, {sup 140}Gd, {sup 140}Tb, {sup 140}Dy, {sup 140}Ho. These data are summarized and presented, together with adopted level schemes and properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparing some predictions between Davidson-like potentials and interacting boson model: X(5) behavior of even-even {sup 128-140}Nd isotopes

We denote that the level scheme of the transitional nuclei {sup 128-140}Nd also presents the characteristic X(5) pattern, not only in the ground-state band, but also in some low-lying bands. An adequate point of the model leading to the X(5) symmetry is therefore confirmed. We also carry out calculations of positive-parity states of even-mass Nd nuclei within the framework of the interacting-boson model, and then the calculated energy values are compared with the experimental data along with the Davidson potential predictions. By comparing transitional behavior in the Nd nuclei with the predictions of an X(5) critical symmetry, we investigate an achievable degree of agreement between the predictions of the model leading to this symmetry and the interacting-boson model (IBM-1 and IBM-2). They agree well with the predictions of the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Search for one-phonon mixed-symmetry states in the radioactive nucleus {sup 140}Nd

Low-spin excited states of {sup 140}Nd have been studied via the {sup 140}Ce({sup 3}He,3n){sup 140}Nd reaction. The data show that one of the candidates for the one-phonon mixed-symmetry state (MSS) of {sup 140}Nd, namely, the 2{sub 3}{sup +} state at 2140 keV with an effective lifetime of 220(90) fs, exhibits a fast M1 decay to the 2{sub 1}{sup +} state. Thus, this state can be considered, at least, as a fragment of the one-phonon MSS of {sup 140}Nd. This is the first example where mixed symmetry character is tentatively assigned to a state of an unstable nucleus from the mass A{approx_equal}140 region based on the data on absolute M1 transition rates. However, the data are not conclusive on whether this decay exhausts the total M1 strength or whether the one-phonon MSS of {sup 140}Nd is fragmented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A search for low-lying mixed symmetry states in {sup 140}Nd

Multipole mixing ratios for transitions between excited 2{sup +} states and the 2{sub 1}{sup +} state in {sup 140}Nd are measured using angular correlation techniques for beta decay reactions. Two transitions with dominant M1 components are identified, and the higher-lying 2{sup +} states involved in these transitions are presented as candidates for the one-phonon mixed-symmetric 2{sup +} state in {sup 140}Nd. Assuming pure two-state mixing between the one-phonon 2{sup +} state and a presumed three-phonon symmetric state yields a mixing matrix element between these states, which is discussed in terms of shell effects on mixed-symmetric behavior in the N = 80 isotones.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Candidates for low-lying mixed-symmetry states in {sup 140}Nd

The nucleus {sup 140}Nd was investigated using {gamma}-{gamma} coincidence and angular-correlation techniques following the {epsilon}/{beta}{sup +} decay of {sup 140}Sm and {sup 140}Pr. Spins, {gamma}-decay intensities, and E2/M1 mixing ratios were extracted from the data. The 2{sub 3}{sup +} and 2{sub 4}{sup +} states were identified as possible mixed-symmetry states, based on mixing ratios obtained for observed decays to the 2{sub 1}{sup +} state. The relationship between the decay pattern of these two candidate states and underlying shell structure in this mass region is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigation of the neutron activation of endohedral rare earth metallofullerenes

Endohedral lanthanide metallofullerenes and their water-soluble biocompatible derivatives have been synthesized. The effect that fast-neutron irradiation has on the stability and nuclear physical properties of endohedral metallofullerenes that are used as magnetocontrast materials ({sup 46}Sc, {sup 140}La, {sup 141}Nd, {sup 153}Sm, {sup 152}Eu, {sup 154}Eu, {sup 153}Sm, {sup 160}Tb, {sup 169}Yb, {sup 170}Tm (isomers I and III), and {sup 177}Lu) is studied. Our hypothesis, according to which carbon-shell relaxation is based on the fast nonradiative processes of an electron shake-off type, is confirmed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic analysis on the basis Judd–Ofelt theory of Nd{sup 3+} in (Y{sub 0.985}Nd{sub 0.015}){sub 2}O{sub 3}: A transparent laser-host ceramic

Highlights: • Transparent Y{sub 2}O{sub 3} ceramic with 1.5 atm% doping of neodymium (Nd) was fabricated and its spectroscopic properties were investigated using Judd–Ofelt theory. • The Judd–Oflet parameters, computed from the absorption bands of Nd{sup 3+} ion, are Ω{sub 2} = 8.84 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 9.82 × 10{sup −20} cm{sup 2} and Ω{sub 6} = 4.44 × 10{sup −20} cm{sup 2}. These parameters were used to determine absorption line strength, radiative transition probabilities, fluorescence branch ratio and radiative lifetime for different transitions of Nd{sup 3+}. • The branching ratios for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition are 0.548 and 0.389, respectively. The spectroscopic quality factor was determined to be 2.21, which is higher than 1.0 atm% neodymium doped Y{sub 2}O{sub 3} ceramic. A calculated radiation decay time (τ = 140 μs) is reasonably close to the experimentally measured life time (153 μs). The life time for 1.5 mol% Nd doped Y{sub 2}O{sub 3} ceramic which is lower than that of 1.0 atm% neodymium doped ceramic. The lowering of life time was attributed to the presence of concentration quenching effects. • The room temperature emission cross-section for individual Stark bands of {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transitions was determined. The total emission cross section for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition was found to be 25.49 × 10{sup −20} and 37.04 × 10{sup −20} cm{sup 2}, which is significantly higher than 1.0 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3}ceramic. - Abstract: Spectroscopic investigation of 1.5 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3} transparent ceramic was performed for different emission wavelengths. Judd–Oflet parameters, computed from the absorption bands of Nd{sup 3+} ion, are Ω{sub 2} = 8.84 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 9.82 × 10{sup −20} cm{sup 2} and Ω{sub 6} = 4.44 × 10{sup −20} cm{sup 2}. These parameters were used to determine absorption line strength, radiative transition probabilities, fluorescence branch ratio and radiative lifetime for different transitions of Nd{sup 3+}. The branching ratios for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition are 0.548 and 0.389, respectively. The calculated radiative lifetime (140 μs) is in good agreement with the measured lifetime (153 μs). The room temperature emission cross-section of individual Stark bands of {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transitions was determined. The total emission cross section for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition was found to be 25.49 × 10{sup −20} and 37.04 × 10{sup −20} cm{sup 2}, which is significantly higher than 1.0 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3}ceramic.

36 MATERIALS SCIENCE↗

The magnetic behavior of the intermetallic compound NdMn{sub 2}Ge{sub 2} studied by magnetization and hyperfine interactions measurements

The magnetic behavior of the intermetallic compound NdMn{sub 2}Ge{sub 2} was investigated by bulk magnetization measurements and measurements of hyperfine interactions using perturbed γ–γ angular correlation (PAC) spectroscopy. Magnetization measurements indicate the presence of four magnetic transitions associated with the Mn and Nd magnetic sublattices. At high temperatures, magnetic measurements show a change in the slope of the magnetization due to an antiferromagnetic transition around T{sub N} ∼ 425 K and a well defined ferromagnetic transition at T{sub C} ∼ 320 K. Moreover, at ∼210 K a peak is observed in the magnetization curve, which is assigned to the reorientation of the Mn spin, and at ∼25 K an increase in the magnetic moment is also observed, which is ascribed to the ordering of Nd ions. PAC measurements using {sup 140}La({sup 140}Ce) and {sup 111}In({sup 111}Cd) probe nuclei allowed the determination of the temperature dependence of the magnetic hyperfine field (B{sub hf}) at Nd and Mn sites, respectively. PAC results with {sup 111}Cd probe nuclei at Mn sites show that the dependence of B{sub hf} with temperature follows the expected behavior for the host magnetization associated with the magnetic ordering of Mn ions. From these results, the antiferromagnetic transition followed by a ferromagnetic ordering is clearly observed. PAC results with {sup 140}Ce probe nuclei at Nd sites, however, showed a strong deviation from the Brillouin function, which is attributed to the Ce 4f-electron contribution to B{sub hf}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of the keV-neutron capture cross section and capture gamma-ray spectrum of isotopes around N=82 region

The keV-neutron capture cross section and capture {gamma}-ray spectra of nuclides with a neutron magic number N= 82, {sup 139}La and {sup 142}Nd, were newly measured by the time-of-flight method. Capture {gamma}-rays were detected with an anti-Compton NaI(T1) spectrometer, and the pulse-height weighting technique was applied to derive the neutron capture cross section. The results were provided with our previous measurements of other nuclides around N= 82, {sup 140}Ce, {sup 141}Pr, {sup 143}Nd and {sup 145}Nd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross sections of the {sup 143}Nd(n,{alpha}){sup 140}Ce and {sup 147}Sm(n,{alpha}){sup 144}Nd reactions in the MeV neutron energy region

Cross sections and forward/backward ratios in the laboratory reference system were measured for the {sup 143}Nd(n,{alpha}){sup 140}Ce reaction at 4.0, 5.0, and 6.0 MeV and for the {sup 147}Sm(n,{alpha}){sup 144}Nd reaction at 5.0 and 6.0 MeV. A twin-gridded ionization chamber and large-area back-to-back {sup 143}Nd{sub 2}O{sub 3} samples and {sup 147}Sm{sub 2}O{sub 3} samples were employed. Experiments were performed at the 4.5 MV Van de Graaff accelerator of Peking University, China. Fast neutrons were produced through the {sup 2}H(d,n){sup 3}He reaction by using a deuterium gas target. A small {sup 238}U fission chamber was employed for absolute neutron flux determination, and a BF{sub 3} long counter was used as the neutron flux monitor. Present experimental data are compared with previous measurements, evaluations, and model calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Power neodymium-glass amplifier of a repetitively pulsed laser

A neodymium-glass diode-pumped amplifier with a zigzag laser beam propagation through the active medium was elaborated; the amplifier is intended for operation in a repetitively pulsed laser. An amplifier unit with an aperture of 20 Multiplication-Sign 25 mm and a {approx}40-cm long active medium was put to a test. The energy of pump radiation amounts to 140 J at a wavelength of 806 nm for a pump duration of 550 {mu}s. The energy parameters of the amplifier were experimentally determined: the small-signal gain per pass {approx}3.2, the linear gain {approx}0.031 cm{sup -1} with a nonuniformity of its distribution over the aperture within 15%, the stored energy of 0.16 - 0.21 J cm{sup -3}. The wavefront distortions in the zigzag laser-beam propagation through the active element of the amplifier did not exceed 0.4{lambda} ({lambda} = 0.63 {mu}m is the probing radiation wavelength).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of chemical composition and crystal structure in sintered Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet

The substitution of cerium, a more abundant rare-earth element, for sintered Nd-Fe-B magnets has drawn intense interest. In the present work, nominal composition of Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} (wt. %), with cerium constitutes increased to 50% of the total rare-earth content, was used. And Ce-free Nd{sub 30}Fe{sub bal}B{sub 1} (wt. %) was prepared by the same preparation process as comparison. The microstructure of the sintered magnets has been investigated by means of X-ray diffraction and transmission electron microscope. The results show that there are three kinds of RE-rich phases in the same magnet, i.e., fcc-(Ce,Nd)O{sub x} (a=0.547nm), hcp-(Ce,Nd){sub 2}O{sub 3} (a=0.386nm, c=0.604nm) and bcc-(Ce,Nd){sub 2}O{sub 3} (a=1.113nm). Ors of (140)(Ce,Nd){sub 2}Fe{sub 14}B// (1-21)bcc-(Ce,Nd){sub 2}O{sub 3}(∼3°), [001](Ce,Nd){sub 2}Fe{sub 14}B// [-214]bcc-(Ce,Nd){sub 2}O{sub 3}; (01-1)(Ce,Nd){sub 2}Fe{sub 14}B// (101)fcc- (Ce,Nd)O{sub x}(∼2°), [101](Ce,Nd){sub 2}Fe14B// [12-1]fcc-(Ce,Nd)O{sub x} were found through selected area electron diffraction (SAED) analysis. According to the analysis, it can be concluded that cerium has partly substituted for neodymium by occupying the corresponding atom sites in the Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet, without changing the crystal configuration.

36 MATERIALS SCIENCE↗

Comparison of the electron density measurements using Thomson scattering and emission spectroscopy for laser induced breakdown in one atmosphere of helium

Thomson scattering from laser-induced plasma in atmospheric helium was used to obtain temporally and spatially resolved electron temperature and density profiles. Electron density measurements at 5 {mu}s after breakdown are compared with those derived from the separation of the allowed and forbidden components of the 447.1 nm He I line. Plasma is created using 9 ns, 140 mJ pulses from Nd:YAG laser at 1064 nm. Electron densities of {approx}5 x 10{sup 16 }cm{sup -3} are in good agreement with Thomson scattering measurements, benchmarking this emission line as a useful diagnostic for high density plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fission Product Yields from Fission Spectrum n+{sup 239}Pu for ENDF/B-VII.1

We describe a new cumulated fission product yield (FPY) evaluation for fission spectrum neutrons on plutonium that updates the ENDF/B-VI evaluation by England and Rider, for the forthcoming ENDF/B-VII.1 database release. We focus on FPs that are needed for high accuracy burnup assessments; that is, for inferring the number of fissions in a neutron environment. Los Alamos conducted an experiment in the 1970s in the Bigten fast critical assembly to determine fission product yields as part of the Interlaboratory Reaction Rate (ILRR) collaboration, and this has defined the Laboratory's fission standard to this day. Our evaluation includes use of the LANL-ILRR measurements (not previously available to evaluators) as well as other Laboratory FPY measurements published in the literature, especially the high-accuracy mass spectrometry data from Maeck and others. Because the measurement database for some of the FPs is small - especially for {sup 99}Mo - we use a meta-analysis that incorporates insights from other accurately-measured benchmark FP data, using R-value ratio measurements. The meta-analysis supports the FP measurements from the LANL-ILRR experiment. Differences between our new evaluations and ENDF/B-VI are small for some FPs (less than 1-2%-relative for {sup 95}Zr, {sup 140}Ba, {sup 144}Ce), but are larger for {sup 99}Mo (4%-relative) and {sup 147}Nd (5%-relative, at 1.5 MeV) respectively. We present evidence for an incident neutron energy dependence to the {sup 147}Nd fission product yield that accounts for observed differences in the FPY at a few-hundred keV average energy in fast reactors versus measurements made at higher average neutron energies in Los Alamos' fast critical assemblies. Accounting for such FPY neutron energy dependencies is important if one wants to reach a goal of determining the number of fissions to accuracies of 1-2%. An evaluation of the energy-dependence of fission product yields is given for all A values based on systematical trends in the measured data, with a focus on the energy dependence over the fast neutron energy range from 0.2-2 MeV. Based on these trends, we present an evaluation of the FPY data at 0.5 and 2.0 MeV average incident neutron energies. This new set of ENDF/B-VII data will enable users to linearly interpolate between the pooled FPY data at {approx}0.5 MeV and our new data at 2 MeV to obtain FPYs at other energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nonlinear thermally induced distortions of a laser beam in a cryogenic disk amplifier

Taking into account the temperature dependences of the heat conductivity, the refractive index, and the thermal expansion coefficient, we calculated the temperature, elastic stresses, a thermally induced lens and depolarisation of a beam in a cryogenic disk amplifier (an Yb:YAG disk placed between a copper cylinder and a sapphire disk cooled by liquid nitrogen). When the active element (the thickness is 0.6 mm, the orientation is [001], the atomic concentration of Yb is 10%) is pumped by radiation from a diode laser (the beam diameter is 6 mm), the temperature does not exceed 140 K for the heat release power of 100 W. In this case, elastic stresses in the active element are six times lower than the maximum permissible value. The focal distance of the thermally induced lens is 5.5 m and the depolarisation rate is 0.038% per two passes through the active element. Although the heat conductivity of the active element rapidly decreases with temperature, the thermal load can be increased by 1.5-2 times when the dimensions of the active element remain constant. (active media)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fission Product Data Measured at Los Alamos for Fission Spectrum and Thermal Neutrons on {sup 239}Pu, {sup 235}U, {sup 238}U

We describe measurements of fission product data at Los Alamos that are important for determining the number of fissions that have occurred when neutrons are incident on plutonium and uranium isotopes. The fission-spectrum measurements were made using a fission chamber designed by the National Institute for Standards and Technology (NIST) in the BIG TEN critical assembly, as part of the Inter-laboratory Liquid Metal Fast Breeder Reactor (LMFBR) Reaction Rate (ILRR) collaboration. The thermal measurements were made at Los Alamos' Omega West Reactor. A related set of measurements were made of fission-product ratios (so-called R-values) in neutron environments provided by a number of Los Alamos critical assemblies that range from having average energies causing fission of 400-600 keV (BIG TEN and the outer regions of the Flattop-25 assembly) to higher energies (1.4-1.9 MeV) in the Jezebel, and in the central regions of the Flattop-25 and Flattop-Pu, critical assemblies. From these data we determine ratios of fission product yields in different fuel and neutron environments (Q-values) and fission product yields in fission spectrum neutron environments for {sup 99}Mo, {sup 95}Zr, {sup 137}Cs, {sup 140}Ba, {sup 141,143}Ce, and {sup 147}Nd. Modest incident-energy dependence exists for the {sup 147}Nd fission product yield; this is discussed in the context of models for fission that include thermal and dynamical effects. The fission product data agree with measurements by Maeck and other authors using mass-spectrometry methods, and with the ILRR collaboration results that used gamma spectroscopy for quantifying fission products. We note that the measurements also contradict earlier 1950s historical Los Alamos estimates by {approx}5-7%, most likely owing to self-shielding corrections not made in the early thermal measurements. Our experimental results provide a confirmation of the England-Rider ENDF/B-VI evaluated fission-spectrum fission product yields that were carried over to the ENDF/B-VII.0 library, except for {sup 99}Mo where the present results are about 4%-relative higher for neutrons incident on {sup 239}Pu and {sup 235}U. Additionally, our results illustrate the importance of representing the incident energy dependence of fission product yields over the fast neutron energy range for high-accuracy work, for example the {sup 147}Nd from neutron reactions on plutonium. An upgrade to the ENDF library, for ENDF/B-VII.1, based on these and other data, is described in a companion paper to this work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

(γ, 2n)-Reaction cross-section calculations of several even-even lanthanide nuclei using different level density models

There are several level density models that can be used to predict photo-neutron cross sections. Some of them are Constant Temperature + Fermi Gas Model (CTFGM), Back-Shifted Fermi Gas Model (BSFM), Generalized Superfluid Model (GSM), Hartree-Fock-Bogoliubov microscopic Model (HFBM). In this study, the theoretical photo-neutron cross sections produced by (γ, 2n) reactions for several eveneven lanthanide nuclei such as {sup 140,142}Ce, {sup 142,144,146,148,150}Nd, {sup 144,148,150,152,154}Sm, and {sup 160}Gd have been calculated on the different level density models as mentioned above by using TALYS 1.6 and EMPIRE 3.1 computer codes for incident photon energies up to 30 MeV. The obtained results have been compared with each other and available experimental data existing in the EXFOR database. Generally, at least one level density model cross-section calculations are in agreement with the experimental results for all reactions except {sup 144}Sm(γ, 2n){sup 142}Sm along the incident photon energy, TALYS 1.6 BSFM option for the level density model cross-section calculations can be chosen if the experimental data are not available or are improbable to be produced due to the experimental difficulty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Study of (n, 2n) Reaction Cross Sections for Ce and Nd Isotopes up to 20 MeV

Neutron cross section calculations for {sup 136}Ce(n, 2n){sup 135}Ce, {sup 138}Ce(n, 2n){sup 137}Ce, {sup 140}Ce(n, 2n){sup 139}Ce, {sup 142}Ce(n, 2n){sup 141}Ce, {sup 142}Nd(n, 2n){sup 141}Nd, {sup 144}Nd(n, 2n){sup 143}Nd, {sup 146}Nd(n, 2n){sup 145}Nd, {sup 148}Nd(n, 2n){sup 147}Nd, and {sup 150}Nd(n, 2n){sup 149}Nd were done in the incident energy range from 10 to 20 MeV. The calculations were performed using three codes TALYS-1.6 for two-component Exciton model, EMPIRE-3.2 Malta for Exciton model, and ALICE/ASH for the Geometry-Dependent Hybrid (GDH) model. The results of model calculations were compared with the available experimental data and also with the evaluated data in the TENDL-2015 (based on the modified TALYS code), ENDF/B-VII.1 libraries. The calculated cross section data were compared with the available experimental data obtained from EXFOR and also compared with semiempirical formulas around 14–15 MeV. The results of model calculation were found to be in good agreement with the experimental data given in literature and semiempirical data around 14–15MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗