SEARCH · Engineering Papers

Results for “Multi-Mission Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

NASA NTRS1984

The Planetary Observer Program

An overview is presented of NASA's plans for the Planetary Observer Program, whose key element is to control the cost of each mission while establishing a long-term, stable base for the planetary sciences. The SSEC (Solar System Exploration Committee) has endorsed the view that many high science priority inner solar system missions are possible through the use of spacecraft derived from existing earth-orbital spacecraft. It has also recommended the application of space hardware such as that used on the Voyager and Galileo missions, development of both a new modular spacecraft for outer planet, comet, and main-belt asteroid missions (Mariner Mark II Program), and a multi-mission operations system to support future missions after the Venus Radar Mapper (VRM), and Galileo. A set of missions for the SSEC's Core Program has been recommended; they include: the VRM, the Mars Geoscience/Climatology Observer, the Comet Rendezvous/Asteroid Flyby, the Lunar Geoscience Orbiter, the Near-Earth Asteroid Rendezvous, the Venus Atmosphere Probe, the Mars Aeronomy Orbiter, the Mars Surface Probe, and the Comet Intercept Sample Return.

Blume, W. H.↗

NASA NTRS1981

Sea based support aircraft alternatives

Multi-mission, CTOL, STOL and V/STOL aircraft concepts were sized for the Navy ASW/ASUW missions and comparatively evaluated. Initially, technology levels in the areas of lift, control systems, propulsion, advanced materials and avionics were established for the early 1990's. The aircraft were compared to determine the impact of multi-mission requirements, operational considerations, chiefly takeoff mode, as well as the technology advancements. Results presented include performance envelopes, weight statements, growth factors, impact of technology on weight reduction and the impact of design constraints.

Priestley, R. T.↗

NASA NTRS1985

The Space Flight Operations Center development project

This paper presents an overview of the Jet Propulsion Laboratory's (JPL) plan for developing a multi-mission facility called the Space Flight Operations Center (SFOC). The SFOC development is a five-year project with the objective of developing and adapting up-to-date computing, networking and data management technology to meet the future data processing and data management requirements for JPL's flight project mission operations. Presented are the project background, basic goals and objectives, design concept and project implementation approach.

Ebersole, M. M.↗

NASA NTRS1991

SHARP: Automated monitoring of spacecraft health and status

Briefly discussed here are the spacecraft and ground systems monitoring process at the Jet Propulsion Laboratory (JPL). Some of the difficulties associated with the existing technology used in mission operations are highlighted. A new automated system based on artificial intelligence technology is described which seeks to overcome many of these limitations. The system, called the Spacecraft Health Automated Reasoning Prototype (SHARP), is designed to automate health and status analysis for multi-mission spacecraft and ground data systems operations. The system has proved to be effective for detecting and analyzing potential spacecraft and ground systems problems by performing real-time analysis of spacecraft and ground data systems engineering telemetry. Telecommunications link analysis of the Voyager 2 spacecraft was the initial focus for evaluation of the system in real-time operations during the Voyager spacecraft encounter with Neptune in August 1989.

Atkinson, David J.↗

NASA NTRS1984

Concepts for a global resources information system

The objective of the Global Resources Information System (GRIS) is to establish an effective and efficient information management system to meet the data access requirements of NASA and NASA-related scientists conducting large-scale, multi-disciplinary, multi-mission scientific investigations. Using standard interfaces and operating guidelines, diverse data systems can be integrated to provide the capabilities to access and process multiple geographically dispersed data sets and to develop the necessary procedures and algorithms to derive global resource information.

Billingsley, F. C.↗

NASA NTRS1972

Program management aid for redundancy selection and operational guidelines

Although this criterion was developed specifically for use on the shuttle program, it has application to many other multi-missions programs (i.e. aircraft or mechanisms). The methodology employed is directly applicable even if the tools (nomographs and equations) are for mission peculiar cases. The redundancy selection criterion was developed to insure that both the design and operational cost impacts (life cycle costs) were considered in the selection of the quantity of operational redundancy. These tools were developed as aids in expediting the decision process and not intended as the automatic decision maker. This approach to redundancy selection is unique in that it enables a pseudo systems analysis to be performed on an equipment basis without waiting for all designs to be hardened.

Hodge, P. W.↗

NASA NTRS1979

Standard power regulator for the multi-mission modular spacecraft

The Standard Power Regulator Unit (SPRU) which forms the central building block of the Modular Power Subsystem (MPS) for the Multi-mission Modular Spacecraft (MMS) is described. A functional description of the SPRU is presented, detailing key design features, operational characteristics, and internal redundancy as well as giving block and schematic diagrams for all major subassemblies. The description of a qualification test program consisting of ten sequences ranging from a physical examination of the unit to calculating vibration and sine sweep of power on shock tests is presented. The results showed that some significant anomalies were encountered but no catastrophic failures were indicated, although several power module failures were found due to overvoltage malfunctions of the solar array stimulator.

Kichak, R. A.↗

DOE OSTI2025

Delving into the depths of NGC 3783 with XRISM II. Cross-calibration of X-ray instruments used in the large, multi-mission observational campaign

Context. Accurate X-ray spectroscopic measurements are fundamental for deriving basic physical parameters of the most abundant baryon components in the Universe. The plethora of X-ray observatories currently operational enables a panchromatic view of the high-energy emission of celestial sources. However, uncertainties in the energy-dependent calibration of the instrument transfer functions (e.g. the effective area, energy redistribution, or gain) can limit - and historically, did limit - the accuracy of X-ray spectroscopic measurements. Aims. We revised the status of the cross-calibration among the scientific payload on board four operation missions: Chandra, NuSTAR, XMM-Newton, and the recently launched XRISM. XRISM carries the micro-calorimeter Resolve, which yields the best energy resolution at energies ≥2 keV. For this purpose, we used the data from a 10-day-long observational campaign targeting the nearby active galactic nucleus NGC 3783, carried out in July 2024. Methods. We present a novel model-independent method for assessing the cross-calibration status that is based on a multi-node spline of the spectra with the highest-resolving power (XRISM/Resolve in our campaign). We also estimated the impact of the intrinsic variability of NGC 3783 on the cross-calibration status due to the different time coverages of participating observatories and performed an empirical reassessment of the Resolve throughput at low energies. Results. Based on this analysis, we derived a set of energy-dependent correction factors of the observed responses, enabling a statistically robust analysis of the whole spectral dataset. They will be employed in subsequent papers describing the astrophysical results of the campaign. Aims. We revised the status of the cross-calibration among the scientific payload on board four operation missions: Chandra, NuSTAR, XMM-Newton, and the recently launched XRISM. XRISM carries the micro-calorimeter Resolve, which yields the best energy resolution at energies ≥2 keV. For this purpose, we used the data from a 10-day-long observational campaign targeting the nearby active galactic nucleus NGC 3783, carried out in July 2024. Methods. We present a novel model-independent method for assessing the cross-calibration status that is based on a multi-node spline of the spectra with the highest-resolving power (XRISM/Resolve in our campaign). We also estimated the impact of the intrinsic variability of NGC 3783 on the cross-calibration status due to the different time coverages of participating observatories and performed an empirical reassessment of the Resolve throughput at low energies. Results. Based on this analysis, we derived a set of energy-dependent correction factors of the observed responses, enabling a statistically robust analysis of the whole spectral dataset. They will be employed in subsequent papers describing the astrophysical results of the campaign.

Active Galactic Nuclei, individual: NGC 3783↗

NASA NTRS1977

LANDSAT D operations control center study

Various aspects of the planned LANDSAT D system are discussed. LANDSAT D incorporates the Thematic Mapper (TM) as a sensor, it utilizes the Multi-mission Modular Spacecraft (MMS), it makes use of the Tracking and Data Relay Satellite System (TDRSS) and it employs a more advanced ground system. Each of these represent significant improvements in the state-of-the-art.

Alexander, L.↗

NASA NTRS1979

Concept for a large multi-mission amphibian aircraft

A very large aircraft has been proposed for meeting both civil cargo and military transport needs for 1995 and beyond. The concept includes a wide noncircular fuselage cross section with a low wing, thick inner wing section, fuselage-mounted engines, and an air cushion landing gear. The civil freighter operates independently of congested passenger airports, using sheltered water as a runway and a waterfront land site for parking and ground operations. The military transport can operate from a wide variety of surfaces and temporary bases. The air cushion landing gear weighs substantially less than conventional gear and permits the use of extended takeoff distance resulting in improved payload/gross weight ratio.

Vaughan, J. C., III↗

NASA NTRS1977

BRAVO economic study of LANDSAT follow-on

The LANDSAT Follow-On satellite consists of two major systems: the instrument module and the Multi-Mission Modular Spacecraft (MMS). The instrument module contains the thematic mapper and the five-band multispectral scanner instruments. The instrument module also includes the solar array, the tracking and data relay satellite (TDRS) antenna, and the wideband data module. The MMS contains the modularized and standardized power, propulsion, attitude control, and command and data handling subsystems. The Shuttle will be supporting the LANDSAT Follow-On system. The LANDSAT Follow-On Project plans two Delta 3910 launches. The first is scheduled for 1981; the second Delta launch will occur as needed to keep one satellite operational on orbit. The second satellite will be ready six months after the first. It could be launched any time after that. Shuttle support of the system could begin in early 1983 but would be scheduled to start after the second Delta launch.

Pritchard, E. I.↗

NASA NTRS1986

Space Infrared Telescope Facility/Multimission Modular Spacecraft Attitude Control System conceptual design

A control system utilizing the Multi-mission Modular Spacecraft (MMS) Attitude Control System (ACS) was developed and analyzed for the Space Infrared Telescope Facility (SIRTF) spacecraft. Alternative torquer augmentation schemes were studied to determine viable ACS approaches. A control law was developed to use a dual set of single-axis Control Moment Gyros (CMGs) for two-axis control. Flexible structural models were developed using a high fidelity, flight tested NASTRAN model of the MMS, coupled with a NASTRAN model of the SIRTF telescope. Modal significance criteria were employed to reduce the structural model. Multivariable interactive techniques were used to synthesize the control system (including the structural filters). Control system performance for the SIRTF operational modes (quiescent inertial hold, slewing, nodding, and rastering) was then determined using both single-axis and three-axis simulations). The control system described met performance requirements for all modes but the raster with the use of CMGs. The raster performance was limited by the structural flexibility.

Class, Brian F.↗

NASA NTRS1975

Design of multi-mission chemical propulsion modules for planetary orbiters. Volume 1: Summary report

Results are presented of a conceptual design and feasibility study of chemical propulsion stages that can serve as modular propulsion units, with little or no modification, on a variety of planetary orbit missions, including orbiters of Mercury, Saturn, and Uranus. Planetary spacecraft of existing design or currently under development, viz., spacecraft of the Pioneer and Mariner families, are assumed as payload vehicles. Thus, operating requirements of spin-stabilized and 3-axis stabilized spacecraft have to be met by the respective propulsion module designs. As launch vehicle for these missions the Shuttle orbiter and interplanetary injection stage, or Tug, plus solid-propellant kick motor was assumed. Accommodation constraints and interfaces involving the payloads and the launch vehicle are considered in the propulsion module design. The applicability and performance advantages were evaluated of the space-storable high-energy bipropellants. The incentive for using this advanced propulsion technology on planetary missions is the much greater performance potential when orbit insertion velocities in excess of 4 km/sec are required, as in the Mercury orbiter. Design analyses and performance tradeoffs regarding earth-storable versus space-storable propulsion systems are included. Cost and development schedules of multi-mission versus custom-designed propulsion modules are examined.

Source record↗

NASA NTRS1971

Mission operations for unmanned nuclear electric propulsion outer planet exploration with a thermionic reactor spacecraft.

Mission operations are presented for comet rendezvous and outer planet exploration NEP spacecraft employing in-core thermionic reactors for electric power generation. The selected reference missions are the Comet Halley rendezvous and a Jupiter orbiter at 5.9 planet radii, the orbit of the moon Io. The characteristics of the baseline multi-mission NEP spacecraft are presented and its performance in other outer planet missions, such as Saturn and Uranus orbiters and a Neptune flyby, are discussed. Candidate mission operations are defined from spacecraft assembly to mission completion. Pre-launch operations are identified. Shuttle launch and subsequent injection to earth escape by the Centaur D-1T are discussed, as well as power plant startup and the heliocentric mission phases. The sequence and type of operations are basically identical for all missions investigated.

Spera, R. J.↗

NASA NTRS1972

Thermionic reactor ion propulsion system /TRIPS/ - Its multi-mission capability.

The unmanned planetary exploration to be conducted in the last two decades of this century includes many higher energy missions which tax all presently available propulsion systems beyond their limit. One candidate with the versatility and performance to meet these mission objectives is nuclear electric propulsion (NEP). Additionally, the NEP System is feasible in orbit raising operations with the Shuttle or Shuttle/Tug combination. A representative planetary mission is described (Uranus-Neptune flyby with probe), and geocentric performance and tradeoffs are discussed. The NEP System is described in more detail with particular emphasis on the power subsystem consisting of the thermionic reactor, heat rejection subsystem, and neutron shield.

Peelgren, M. L.↗

NASA NTRS1974

Earth Observatory Satellite system definition study. Report 5: System design and specifications. Volume 1: Baseline system description

A system baseline design oriented to the requirements of the next generation of Earth Observatory Satellite missions is presented. The first mission (EOS-A) is envisioned as a two-fold mission which (1) provides a continuum of data of the type being supplied by ERTS for the emerging operational applications and also (2) expands the research and development activities for future instrumentation and analysis techniques. The baseline system specifically satisfies the requirements of this first mission. However, EOS-A is expected to be the first of a series of earth observation missions. Thus the baseline design has been developed so as to accommodate these latter missions effectively as the transition is made from conventional, expendable launch vehicles and spacecraft to the Shuttle Space Transportation System era. Further, a subset of alternative missions requirements including Seasat, SEOS, SMM and MSS-5 have been analyzed to verify that the spacecraft design to serve a multi-mission role is economically sound. A key feature of the baseline system design is the concept of a modular observatory system whose elements are compatible with varying levels of launch vehicle capability. The design configuration can be used with either the Delta or Titan launch vehicles and will adapt readily to the space shuttle when that system becomes available in the early 1980's.

Source record↗

NASA NTRS1984

Space exploration outlook

The exploration of the solar system has been one of NASA's most significant achievements. Currently Voyager 2 is on its way to Uranus and Neptune, and Galileo is being readied for detailed investigation of Jupiter and its Galilean satellites. A new phase of exploration will be inaugurated in the mid-80s with the start of the Planetary Observers and Mariner Mark II missions. A major thrust during this phase will be to cut mission costs by emphasizing spacecraft inheritance and multi-mission automated mission operations. More ambitious missions, e.g., Mars Sample Return, are under study but probably will not be candidates for new start funding till the mid-90s. Another exciting area is the potential utilization of resources on the moon and near earth asteroids.

Rea, D. G.↗

NASA NTRS1966

A Modular Nuclear Vehicle System with Multi-Mission Capability for Mars Stopover Missions

In depth studies conducted over the past two years have established a modular nuclear stage concept which offers multi-mission capability with a maximum of hardware commonality, i.e., a concept which minimizes total hardware development effort and investment in facilities while providing a logical development evolution from ground test systems to flight test and from initial to more ambitious space applications. Recent results oriented toward the definition and application of such a vehicle concept for the manned Mars landing mission are presented. The basic modular concept employing NERVA nuclear rocket engines is reviewed and the mission peculiar factors affecting the module sizes and number of modules required are discussed. Specific results presented are restricted primarily to the 1982 Mars landing mission via the opposition class mission mode since this is the earliest anticipated date for such a mission. The realistic effects of orbital launch windows are considered and brief discussions of orbital assembly and packaging options with a modular approach are given. Typical ground launch and orbital assembly operations are defined assuming an uprated Saturn V class launch vehicle and the connecting mode of orbital assembly, in which all modules are orbited fully loaded with propellant. The effect of a significant increase in nuclear engine specific impulse is discussed.

Harris, Ronald J.↗