Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Moon to Mars”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Measuring the Elemental Composition of Phobos: The Mars-moon Exploration with GAmma rays and NEutrons (MEGANE) Investigation for the Martian Moons eXploration (MMX) Mission

The Mars-moon Exploration with GAmma rays and NEutrons (MEGANE) investigation will use gamma-ray and neutron spectroscopy to measure the elemental composition of Mars' moon Phobos. MEGANE is part of the Japanese Martian Moons eXploration (MMX) mission that will make comprehensive remote sensing measurements of both of Mars' moons Phobos and Deimos. MMX will also return to Earth regolith samples of Phobos. The science goals of the MEGANE investigation mirror those of the MMX mission. MEGANE will use elemental composition measurements to determine if Phobos is a captured asteroid or the end result of a giant impact event on Mars, study Phobos surface processes, provide reconnaissance to support the sample site selection, and supply compositional context for the returned samples. To accomplish its measurements, MEGANE will use a high-purity Ge gamma-ray spectrometer (GRS), and a neutron spectrometer (NS) that consists of two 3He gas proportional neutron sensors. The GRS derives heritage from similar instruments from NASA's MErcury Surface, Space ENvironment, GEochemistry, and Ranging mission and the Psyche mission that is currently in development; the NS is based on similar instruments used for NASA's Lunar Prospector and Psyche missions.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation damage and annealing of three coaxial n-type germanium detectors: Preparation for spaceflight missions to asteroid 16 Psyche and Mars’ moon Phobos

Three n-type high-purity germanium (HPGe) detectors were irradiated with protons at solar and galactic cosmic ray energies, with fluences corresponding to 3 years of exposure to the interplanetary radiation environment. Following 1 GeV proton irradiations (8x10 8 protons cm –2 ), annealing of the detectors at 105° and 115 °C resulted in full energy resolution recovery after 240 and 140 h of annealing, respectively. A second irradiation, consisting of 7.25x10 9 protons cm –2 with a solar-proton-like energy spectrum, resulted in full recovery within <316 h of annealing at 105 °C. Prior spaceflight experience raised concerns about annealing-induced leakage currents. During this study, one of the three detectors was annealed for a cumulative time of 57 days, and there was no evidence for increased leakage currents. However, gamma-ray photopeak detection efficiency was found to be strongly anti-correlated with cumulative anneal time for all three detectors. The energy- and time-dependence of the efficiency loss is consistent with the loss of active volume at the inner borehole, which we attribute to thermal diffusion of the lithium contact during annealing. The data collected during this study validate aspects of the design of two in-development planetary gamma-ray spectrometers; one to the asteroid (16) Psyche and one to Mars’ moon Phobos. The annealing strategy and operations concepts for these two instruments are informed by the results of this study.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Moon, Mars and Minds: Evaluating Parkinson’s disease mortality among U.S. radiation workers and veterans in the million person study of low-dose effects

Background: Radiation is one of the most important stressors related to missions in space beyond Earth’s orbit. Epidemiologic studies of exposed workers have reported elevated rates of Parkinson’s disease. The importance of cognitive dysfunction related to low-dose rate radiation in humans is not defined. A meta-analysis was conducted of six cohorts in the Million Person Study (MPS) of low-dose health effects to learn whether there is consistent evidence that Parkinson’s disease is associated with radiation dose to brain. Materials and methods: The MPS evaluates all causes of death among U.S. radiation workers and veterans, including Parkinson’s disease. Systematic and consistent methods are applied to study all categories of workers including medical radiation workers, industrial radiographers, nuclear power plant workers, atomic veterans, and Manhattan Projects workers at the Los Alamos National Laboratory and at Rocky Flats. Consistent methods for all cohorts are used to estimate organ-specific doses and to obtain vital status and cause of death. Results: The meta-analysis include 6 cohorts within the MPS, consisting of 517,608 workers and 17,219,001 person-years of observation. The mean dose to brain ranged from 6.9 to 47.6 mGy and the maximum dose from 0.76 to 2.7 Gy. Five of the 6 cohorts revealed positive associations with Parkinson’s disease. The overall summary estimate from the meta-analysis was statistically significant based on 1573 deaths due to Parkinson’s disease. The summary excess relative risk at 100 mGy was 0.17 (95% CI: 0.05; 0.29). Conclusions: Parkinson’s disease was positively associated with radiation in the MPS cohorts indicating the need for careful evaluation as to causality in other studies, delineation of possible mechanisms, and assessing possible implications for space travel as well as radiation protection guidance for terrestrial workers.

60 APPLIED LIFE SCIENCES↗

Extensibility of the fission surface power (FSP) system from the moon to Mars

Fission reactors have great near-term potential to power human and robotic missions/outposts on the surface of the Moon and Mars (and potentially other planets, moons, and asteroids). The ability to provide a power-rich environment that is independent of solar intensity, nights, dust storms, etc., is of significant (perhaps enabling) importance to the further expansion of humans into our solar system. NASA's Reference Fission Surface Power (FSP) System is a 40 kWe system that has been primarily designed for lunar applications. This paper examines the extensibility of the FSP design and technology for potential missions on Mars. Possible impacts include the effects of changes in heat sink, gravity, day-night cycles, mission transit time, communication delay, and the chemistry of the regolith and atmosphere. One of the biggest impacts might be differences in the potential utilization of in-situ materials for shielding. Another major factor is that different missions will likely require different performance requirements, e.g. power, lifetime and mass. This paper concludes that the environmental differences between potential mission locations will not require significant changes in design and technologies, unless performance requirements for a specific mission are substantially different than those adopted for the FSP The primary basis for this conclusion is that the FSP has been designed with robust materials and design margins.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Mars, the Moon, and the Ends of the Earth: Autonomy for Small Reactor Power Systems

In recent years, the National Aeronautics and Space Administration (NASA) has been considering deep space missions that utilize a small-reactor power system (SRPS) to provide energy for propulsion and spacecraft power. Additionally, application of SRPS modules as a planetary power source is being investigated to enable a continuous human presence for nonpolar lunar sites and on Mars. A SRPS can supply high-sustained power for space and surface applications that is both reliable and mass efficient. The use of small nuclear reactors for deep space or planetary missions presents some unique challenges regarding the operations and control of the power system. Current-generation terrestrial nuclear reactors employ varying degrees of human control and decision-making for operations and benefit from periodic human interaction for maintenance. In contrast, the control system of a SRPS employed for deep space missions must be able to accommodate unattended operations due to communications delays and periods of planetary occlusion while adapting to evolving or degraded conditions with no opportunity for repair or refurbishment. While surface power systems for planetary outposts face less extreme delays and periods of isolation and may benefit from limited maintenance capabilities, considerations such as human safety, resource limitations and usage priorities, and economics favor minimizing direct, continuous human interaction with the SRPS for online, dedicated power system management. Thus, a SRPS control system for space or planetary missions must provide capabilities for operational autonomy. For terrestrial reactors, large-scale power plants remain the preferred near-term option for nuclear power generation. However, the desire to reduce reliance on carbon-emitting power sources in developing countries may lead to increased consideration of SRPS modules for local power generation in remote regions that are characterized by emerging, less established infrastructures. Additionally, many Generation IV (Gen IV) reactor concepts have goals for optimizing investment recovery and economic efficiency that promote significant reductions in plant operations and maintenance staff over current-generation nuclear power plants. To accomplish these Gen IV goals and also address the SRPS remote-siting challenges, higher levels of automation, fault tolerance, and advanced diagnostic capabilities are needed to provide nearly autonomous operations with anticipatory maintenance. Essentially, the SRPS control system for several anticipated terrestrial applications can benefit from the kind of operational autonomy that is necessary for deep space and planetary SRPS-enabled missions. Investigation of the state of the technology for autonomous control confirmed that control systems with varying levels of autonomy have been employed in robotic, transportation, spacecraft, and manufacturing applications. As an example, NASA has pursued autonomy for spacecraft and surface exploration vehicles (e.g., rovers) to reduce mission costs, increase efficiency for communications between ground control and the vehicle, and enable independent operation of the vehicle during times of communications blackout. However, autonomous control has not been implemented for an operating terrestrial nuclear power plant nor has there been any experience beyond automating simple control loops for space reactors. Current automated control technologies for nuclear power plants are reasonably mature, and fully automated control of normal SRPS operations is clearly feasible. However, the space-based and remote terrestrial applications of SRPS modules require autonomous capabilities that can accommodate nonoptimum operations when degradation, failure, and other off-normal events challenge the performance of the reactor while immediate human intervention is not possible. The independent action provided by autonomous control, which is distinct from the more limited self action of automated control, can satisfy these conditions. Key characteristics that distinguish autonomous control include: (1) intelligence to confirm system performance and detect degraded or failed conditions, (2) optimization to minimize stress on SRPS components and efficiently react to operational events without compromising system integrity, (3) robustness to accommodate uncertainties and changing conditions, and (4) flexibility and adaptability to accommodate failures through reconfiguration among available control system elements or adjustment of control system strategies, algorithms, or parameters.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CHEMISTRY OF IMPACT-GENERATED SILICATE MELT-VAPOR DEBRIS DISKS

In the giant impact theory for lunar origin, the Moon forms from material ejected by the impact into an Earth-orbiting disk. Here we report the initial results from a silicate melt-vapor equilibrium chemistry model for such impact-generated planetary debris disks. In order to simulate the chemical behavior of a two-phase (melt+vapor) disk, we calculate the temperature-dependent pressure and chemical composition of vapor in equilibrium with molten silicate from 2000 to 4000 K. We consider the elements O, Na, K, Fe, Si, Mg, Ca, Al, Ti, and Zn for a range of bulk silicate compositions (Earth, Moon, Mars, eucrite parent body, angrites, and ureilites). In general, the disk atmosphere is dominated by Na, Zn, and O{sub 2} at lower temperatures (<3000 K) and SiO, O{sub 2}, and O at higher temperatures. The high-temperature chemistry is consistent for any silicate melt composition, and we thus expect abundant SiO, O{sub 2}, and O to be a common feature of hot, impact-generated debris disks. In addition, the saturated silicate vapor is highly oxidizing, with oxygen fugacity (f{sub O{sub 2}}) values (and hence H{sub 2}O/H{sub 2} and CO{sub 2}/CO ratios) several orders of magnitude higher than those in a solar-composition gas. High f{sub O{sub 2}} values in the disk atmosphere are found for any silicate composition because oxygen is the most abundant element in rock. We thus expect high oxygen fugacity to be a ubiquitous feature of any silicate melt-vapor disk produced via collisions between rocky planets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tarda and Tagish Lake: Samples from the same outer Solar System asteroid and implications for D- and P-type asteroids

Here, we report a comprehensive study of the ungrouped type 2 carbonaceous chondrite, Tarda, which fell in Morocco in 2020. This meteorite exhibits substantial similarities to Tagish Lake, Wisconsin Range 91600, and Meteorite Hills 00432, which are generally considered to have originated from a D-type asteroid(s). We constrain the compositions and petrologies of the materials present in a potential sample of a D-type asteroid by reporting the petrography, bulk chemical compositions, bulk H, C, N, Cr, and Ti isotopic compositions, reflectance spectra, and in situ chemical compositions of metals, sulfides, carbonates, and FeO-poor and FeO-rich chondrule silicates of Tarda. We also present new data for Tagish Lake. We then compare Tarda with the other Tagish Lake-like meteorites. Tarda and Tagish Lake appear to be from the same parent body, as demonstrated by their similar petrologies (modal abundances, chondrule sizes), mineral compositions, bulk chemical and isotopic compositions, and reflectance spectra. While the two other Tagish Lake-like meteorites, Wisconsin Range 91600 and Meteorite Hills 00432, show some affinities to Tagish Lake and Tarda, they also share similar characteristics to the Mighei-like carbonaceous (CM) chondrites, warranting further study. Similarities in reflectance spectra suggest that P-type asteroids 65 Cybele and 76 Freia are potential parent bodies of Tarda and the Tagish Lake-like meteorites, or at least have similar surface materials. Since upcoming spacecraft missions will spectrally survey D-type, P-type, and C-type Trojan asteroids (NASA's Lucy) and spectrally study and return samples from Mars' moon Phobos (JAXA's Martian Moons eXploration mission), which is spectrally similar to D-type asteroids, these meteorites are of substantial scientific interest. Furthermore, since Tarda closely spectrally matches P-type asteroids (but compositionally matches the D-type asteroid like Tagish Lake meteorite), P-type and D-type asteroids may represent fragments of the same or similar parent bodies.

58 GEOSCIENCES↗

Development towards stable chlorine isotope measurements of astromaterials using the modified Middleton source of an accelerator mass spectrometer

The volatile element Cl can be lost during the formation and evolution of planetary bodies, leading to fractionation of its two stable isotopes 35 Cl and 37 Cl. Chlorine isotope variations (reported as δ 37 Cl in parts per thousand (‰) relative to Standard Mean Ocean Chloride, SMOC) are documented to exceed 80‰ between different lunar rock samples and have been variably interpreted as the fingerprint of degassing during accretion, magma ocean, or volcanic portions of lunar history. The large intersample and intrasample variations observed by both bulk isotope ratio mass spectrometry (IRMS) and in-situ secondary ion mass spectrometry (SIMS) methods are difficult to interpret in part because of a paucity of bulk Cl isotope measurements. This lack of high-precision bulk data is due to the relative rarity of IRMS laboratories capable of making these high precision measurements on small samples of precious planetary materials such as those returned by human or robotic exploration. Here we present a new method for performing high precision δ 37 Cl measurements using the modified Middleton ion source of an existing accelerator mass spectrometer. For samples with as little as 1 μg Cl–the equivalent of 2–4 mm 3 of a typical lunar rock sample–the average cathode accuracy is ~1‰. Finally, cathode reproducibility is typically ~1‰ (2σ) for samples with at least 10 μg of Cl, increasing to ~3–6‰ for aliquots with ~1–2 μg Cl, similar to published SIMS results and sufficient to study astromaterials from the Moon, Mars, or 4 Vesta, which have tens of ‰ observed variations.

07 ISOTOPE AND RADIATION SOURCES↗

Non-traditional stable isotope measurements using laser desorption Orbitrap mass spectrometry: Implications for planetary missions.

Isotopic fractionation recorded in planetary materials provides insights into physical, chemical, and/or potential biological processes occurring on Solar System bodies. As we enter into the next decades of planetary exploration, the crucial information revealed by isotopic compositions of rocky and icy samples mandates that next generation spaceflight instrumentation possess the capability to measure isotope ratios in situ with sufficient precision/accuracy to distinguish between such processes. Here, in addition to identifying and fingerprinting complex organic materials with high accuracy and ultrahigh mass resolutions, laser desorption Orbitrap™ mass spectrometry (LD-O-MS) has the capability to determine the elemental and isotopic composition of solid planetary materials such as rock, regolith, organics, ice, etc. Here, we use a space-qualified LD-O-MS instrument comprising a 266 nm ultraviolet (UV) laser and Orbitrap mass analyzer ruggedized for planetary applications to investigate the stable isotopic composition of Ti and Zn metal plates. Based on the isotopic analyses, we constrain the performance of the CORALS instrument to sub per mille (‰) level accuracy and precision for Ti and at the per mille (‰) level for Zn. An LD-O-MS instrument is a versatile instrument capable of measuring isotopic composition of a variety of planetary samples and would constitute a critical instrument in the exploration of various planetary bodies including but not limited to Moon, Mars, Enceladus and other ocean or icy worlds, Ceres and other asteroids, and comets, thereby answering several high-priority questions pertaining to the formation and evolution of our Solar System.

58 GEOSCIENCES↗

Radiation Stability of Mixed Tin-Lead Halide Perovskites: Implications for Space Applications

Mixed organic-inorganic halide perovskite solar cells (PSCs) have received considerable attention in recent years for their impressive solar to electrical power efficiency gains and potentially lower material and processing costs for optoelectronic applications. In addition to terrestrial applications, PSCs are of interest to the space power markets for their low cost, low weight, adaptability to flexible architectures, and tolerance to high energy particle irradiation (mainly protons and electrons). Here we investigate the properties of mixed formamidinium-methylammonium tin-lead iodide (FASn)0.6(MAPb)0.4I3 perovskites which lower the lead content as well as the bandgap, making them attractive for the low bandgap absorber material in tandem PSCs. Through current density-voltage (JV) characterization at lower temperatures, majority carrier transport is hindered and a barrier to photogenerated carrier extraction is evident. This is attributed to the thermally induced change of the bandgap of the absorber layer relative to the energy selective contacts in the device. We find that although the architecture used here hinders the performance at temperatures below 225 K, the tolerance to high energy (3.7 MeV) protons is impressive, considerably out-performing commercially available thin-film CIGS. These results suggest further improvements to structural and interface stability as well as lightweight encapsulation could lead to all perovskite flexible tandem arrays deployed for power generation on missions to low Earth orbit, the moon, Mars, and beyond.

perovskite solar cells↗

Transformational Technologies to Expedite Space Access and Development

Throughout history the emergence of new technologies has enabled unforeseen breakthrough capabilities that rapidly transformed the world. Some global examples from the twentieth century include AC electric power, nuclear energy, and turbojet engines. At the systems level, success of both Apollo and the Space Shuttle programs depended upon taming hydrogen propulsion and developing high-temperature atmospheric reentry materials. Human space development now is stymied because of a great need for breakthrough technologies and strategies. It is believed that new capabilities exist within the present states-of-the-art of superconducting technology that can be implemented to transform the future of human space development. This paper is an overview of three other papers presented within this forum, which summarizes the principles and consequences of StarTram, showing how the resulting breakthrough advantages can lead directly to safe space tourism and massive development of the moon, Mars and the outer solar system. StarTram can implement cost-effective solar power from space, simple utilization of asteroid material to protect humans from ionizing radiation, and effective defense of the Earth from devastating cosmic impacts. Synergistically, StarTram technologies will revolutionize ground transportation on the Earth, leading to enormous reduction in energy consumption and creation of millions of jobs. High energy lasers will also be discussed because of their importance to power beaming applications.

42 ENGINEERING↗

Noble Gas Thermochronology of Extraterrestrial Materials

Rocks from extraterrestrial bodies in the Solar System are influenced by thermal processes occurring within planetary interiors and on their surfaces. These range from the extremely hot and brief, in the case of impact events, to the comparatively cool and protracted, in the case of solar irradiation of rocks residing in regoliths for millions to billions of years. Noble gas thermochronology has been applied to meteorites and extraterrestrial materials returned by space missions and has enabled us to decipher the histories of these materials and thereby understand fundamental aspects of the evolution of terrestrial planetary bodies, including the Moon, Mars, and asteroids.

79 ASTRONOMY AND ASTROPHYSICS↗

In-situ resource utilization-derived water purification and hydrogen and oxygen production

This disclosure provides an integrated system and method for producing purified water, hydrogen, and oxygen from contaminated water. The contaminated water may be derived from regolith-based resources on the moon, Mars, near-Earth asteroids, or other destination in outer space. The integrated system and method utilize a cold trap to receive the contaminated water in a vapor phase and selectively freeze out water from one or more volatiles. A heat source increases temperature in the cold trap to vaporize the frozen contaminated water to produce a gas stream of water vapor and volatiles. A chemical scrubber may remove one or more volatiles. The integrated system and method utilize ionomer membrane technology to separate the water vapor from remaining volatiles. The water vapor is delivered for crew use or delivered to an electrolyzer to produce hydrogen and oxygen.

Finger, Barry Wynns↗

A New Martian Crater Chronology: Implications for Jezero Crater

Crater chronologies are a fundamental tool to assess the relative and absolute ages of planetary surfaces when direct radiometric dating is not available. Martian crater chronologies are derived from lunar crater spatial densities on terrains with known radiometric ages, and thus they critically depend on the Moon-to-Mars extrapolation. This extrapolation requires knowledge of the time evolution of the impact flux, including contributions from various impactor populations, factors that are not trivially connected to the dynamical evolution of the early Solar System. In this paper, we will present a new Martian crater chronology based on current dynamical models, and consider the main sources of uncertainties (e.g., impactor size–frequency distribution; dynamical models with late and early instabilities, etc.). The resulting “envelope” of Martian crater chronologies significantly differs from previous chronologies. The new Martian crater chronology is discussed using two interesting applications: Jezero crater’s dark terrain (relevant to the NASA Mars 2020 mission) and the southern heavily cratered highlands. Our results indicate that Jezero’s dark terrain may have formed ∼3.1 Ga, i.e., up to 0.5 Gyr older than previously thought. In addition, available crater chronologies (including our own) overestimate the number of craters larger than 150 km on the southern highlands, suggesting either that large craters have been efficiently erased over Martian history or that dynamical models need further refinement. Further, our chronology constrains the age of Isidis basin to be 4.05–4.2 Ga and that of the Borealis basin to be 4.35–4.40 Ga; these are predictions that can be tested with future sample and return missions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

THE LAST STAGES OF TERRESTRIAL PLANET FORMATION: DYNAMICAL FRICTION AND THE LATE VENEER

The final stage of terrestrial planet formation consists of the clean-up of residual planetesimals after the giant impact phase. Dynamically, a residual planetesimal population is needed to damp the high eccentricities and inclinations of the terrestrial planets to circular and coplanar orbits after the giant impact stage. Geochemically, highly siderophile element (HSE) abundance patterns inferred for the terrestrial planets and the Moon suggest that a total of about 0.01 M{sub Circled-Plus} of chondritic material was delivered as 'late veneer' by planetesimals to the terrestrial planets after the end of giant impacts. Here, we combine these two independent lines of evidence for a leftover population of planetesimals and show that: (1) a residual population of small planetesimals containing 0.01 M{sub Circled-Plus} is able to damp the high eccentricities and inclinations of the terrestrial planets after giant impacts to their observed values. (2) At the same time, this planetesimal population can account for the observed relative amounts of late veneer added to the Earth, Moon, and Mars provided that the majority of the accreted late veneer was delivered by small planetesimals with radii {approx}< 10 m. These small planetesimal sizes are required to ensure efficient damping of the planetesimal's velocity dispersion by mutual collisions, which in turn ensures sufficiently low relative velocities between the terrestrial planets and the planetesimals such that the planets' accretion cross sections are significantly enhanced by gravitational focusing above their geometric values. Specifically, we find that, in the limit that the relative velocity between the terrestrial planets and the planetesimals is significantly less than the terrestrial planets' escape velocities, gravitational focusing yields a mass accretion ratio of Earth/Mars {approx}({rho}{sub Circled-Plus }/{rho}{sub mars})(R{sub Circled-Plus }/R{sub mars}){sup 4} {approx} 17, which agrees well with the mass accretion ratio inferred from HSEs of 12-23. For the Earth-Moon system, we find a mass accretion ratio of {approx}200, which, as we show, is consistent with estimates of 150-700 derived from HSE abundances that include the lunar crust as well as the mantle component. We conclude that small residual planetesimals containing about {approx}1% of the mass of the Earth could provide the dynamical friction needed to relax the terrestrial planet's eccentricities and inclinations after giant impacts, and also may have been the dominant source for the late veneer added to Earth, Moon, and Mars.

79 ASTRONOMY AND ASTROPHYSICS↗

Sulfides from Martian and Lunar Basalts: Comparative Chemistry for Ni Co Cu and Se

Here Mars and Moon are used as 'natural laboratories' with Moon displaying lower oxygen fugacities ({approx}IW-1) than Mars ({approx}IW to FMQ). Moon has lower concentrations of Ni and Co in basaltic melts than does Mars. The major sulfides are troilite (FeS) in lunar basalts and pyrrhotite (Fe{sub 1-x}S) in martian basalts. This study focuses on the concentrations of Ni, Co, Cu, and Se. We chose these elements because of their geochemical importance and the feasibility of analyzing them with a combination of synchrotron X-ray fluorescence (SXRF) and electron microprobe (EPMA) techniques. The selenium concentrations could only be analyzed, at high precision, with SXRF techniques as they are <150 ppm, similar to concentrations seen in carbonaceous chondrites and interplanetary dust particles (IDPs). Nickel and Co are in higher concentrations in martian sulfides than lunar and are higher in martian olivine-bearing lithologies than olivine-free varieties. The sulfides in individual samples show very large ranges in concentration (e.g., Ni ranges from 50 000 ppm to <5 ppm). These large ranges are mainly due to compositional heterogeneities within individual grains due to diffusion and phase separation. Electron microprobe wavelength-dispersive (WDS) mapping of Ni, Co, and Cu show the diffusion trajectories. Nickel and Co have almost identical diffusion trajectories leading to the likely nucleation of pentlandite (Ni,Co,Fe){sub 9}S{sub 8}, and copper diffuses along separate pathways likely toward chalcopyrite nucleation sites (CuFeS{sub 2}). The systematics of Ni and Co in lunar and martian sulfides clearly distinguish the two parent bodies, with martian sulfides displaced to higher Ni and Co values.

58 GEOSCIENCES↗

National Academy of Science, Engineering, and Medicine, NASA Planetary Science and Astrobiology Decadal Survey (Chapter 3)

Our inner Solar System has the four terrestrial planets, Mercury, Venus, Earth, and Mars, along with Earth’s large Moon, two small moons of Mars, dwarf planet Ceres, numerous 100-km class asteroids, and a multitude of small bodies that populate the asteroid belt and the inner planet region. To what extent does this structure reflect a deterministic outcome of general Solar System formation processes, and how much of it is instead a consequence of stochastic events that would change in unpredictable ways if the system’s formation could be rerun? This fundamental question motivates scientific investigations of the inner Solar System, with implications not only for understanding our own planet’s origin but also for the origin of planetary systems and Earth-like planets beyond our own.

79 ASTRONOMY AND ASTROPHYSICS↗

NEW TITANIUM ISOTOPE DATA FOR ALLENDE AND EFREMOVKA CAIs

We measured the titanium (Ti) isotope composition, i.e., {sup 50}Ti/{sup 47}Ti, {sup 48}Ti/{sup 47}Ti, and {sup 46}Ti/{sup 47}Ti, in five calcium-rich-aluminum-rich refractory inclusions (CAIs) from the oxidized CV3 chondrite Allende and in two CAIs from the reduced CV3 chondrite Efremovka. Our data indicate that CAIs are enriched in {sup 50}Ti/{sup 47}Ti and {sup 46}Ti/{sup 47}Ti and are slightly depleted in {sup 48}Ti/{sup 47}Ti compared to normal Ti defined by ordinary chondrites, eucrites, ureilites, mesosiderites, Earth, Moon, and Mars. Some CAIs have an additional {sup 50}Ti excess of {approx}8{epsilon} relative to bulk carbonaceous chondrites, which are enriched in {sup 50}Ti by {approx}2{epsilon} relative to terrestrial values, leading to a total excess of {approx}10{epsilon}. This additional {sup 50}Ti excess is correlated with nucleosynthetic anomalies found in {sup 62}Ni and {sup 96}Zr, all indicating an origin from a neutron-rich stellar source. Bulk carbonaceous chondrites show a similar trend, however, the extent of the anomalies is either less than or similar to the smallest anomalies seen in CAIs. Mass balance calculations suggest that bulk Allende Ti possibly consists of a mixture of at least two Ti components, anomalous Ti located in CAIs and a normal component possibly for matrix and chondrules. This argues for a heterogeneous distribution of Ti isotopes in the solar system. The finding that anomalous Ti is concentrated in CAIs suggests that CAIs formed in a specific region of the solar system and were, after their formation, not homogeneously redistributed within the solar system. Combining the CAI data with improved model predictions for early solar system irradiation effects indicates that a local production scenario for the relatively short lived radionuclides can be excluded, because the production of, e.g., {sup 10}Be, {sup 26}Al, and {sup 41}Ca, would result in a significant collateral shift in Ti isotopes, which is not seen in the measured data.

79 ASTRONOMY AND ASTROPHYSICS↗