Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Moon's properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Phase Transitions and Thermal Equation of State of Fe‐9wt.%Si Applied to the Moon and Mercury

Abstract Accurate knowledge of the phase transitions and thermoelastic properties of candidate iron alloys, such as Fe‐Si alloys, is essential for understanding the nature and dynamics of planetary cores. The phase diagrams of some Fe‐Si alloys between 1 atm and 16 GPa have been back‐extrapolated from higher pressures, but the resulting phase diagram of Fe 83.6 Si 16.4 (9 wt.% Si) is inconsistent with temperature‐induced changes in its electrical resistivity between 6 and 8 GPa. This study reports in situ synchrotron X‐ray diffraction (XRD) measurements on pre‐melted and powder Fe 83.6 Si 16.4 samples from ambient conditions to 60 GPa and 900 K using an externally heated diamond‐anvil cell. Upon compression at 300 K, the bcc phase persisted up to ∼38 GPa. The hcp phase appeared near 8 GPa in the pre‐melted sample, and near 17 GPa in the powder sample. The appearance of the hcp phase in the pre‐melted sample reconciles the reported changes in electrical resistivity of a similar sample, thus resolving the low‐pressure region of the phase diagram. The resulting high‐temperature Birch‐Murnaghan equation of state (EoS) and thermal EoS based on the Mie‐Gruneisen‐Debye model of the bcc and hcp structures are consistent with, and complement the literature data at higher pressures. The calculated densities based on the thermal EoS of Fe‐9wt.%Si indicate that both bcc and hcp phases agree with the reported core density estimates for the Moon and Mercury.

Berrada, Meryem↗
DOE OSTI2024

Strength, plasticity, and spin transition of Fe-N compounds in planetary cores

Elastic and plastic properties of Fe-light element alloys and compounds are needed to determine the compositions and dynamics of planetary cores. Elastic strength and plastic deformation mechanisms and their relationship to electronic properties of ε-Fe 7 N 3 and γ’-Fe 4 N mixture were investigated by x-ray diffraction and x-ray emission spectroscopy in the diamond anvil cell from 1 bar up to 60 GPa. X-ray diffraction shows that ε-Fe 7 N 3 reaches a pressure of 15–20 GPa before undergoing bulk plasticity at a differential stress of 4.4–10.4 GPa. ε-Fe 7 N 3 is stronger than γ’-Fe 4 N and hcp-Fe which achieve a flow stress of 1.5–3.6 GPa at 10–15 GPa and 2–3 GPa at ~20 GPa, respectively. X-ray emission spectroscopy shows that a decrease in electronic spin moment begins before and completes after plastic flow onset for each nitride, suggesting that pressure-driven changes in electronic arrangement do not trigger a plastic response although they may modify the strength and plastic behavior of Fe-N compounds. Plastic deformation in ε-Fe 7 N 3 and hcp-Fe results in a preferred orientation of (0001) normal to maximum compression, while γ’-Fe 4 N develops a maximum in the (110). Furthermore, these observations may be combined with measurements of elasticity to model seismic properties of cores of small planetary bodies such as Mars, Mercury, and the Moon.

58 GEOSCIENCES↗
DOE OSTI2025

Dimorphos’s Material Properties and Estimates of Crater Size from the DART Impact

On 2022 September 26, the Double Asteroid Redirection Test (DART) spacecraft intentionally collided with Dimorphos, the moon of the binary asteroid system 65803 Didymos. This collision provided the first full-scale test of a kinetic impactor for planetary defense. Images from DART’s DRACO camera revealed Dimorphos to be an oblate spheroid covered in boulders of varying sizes and shapes. Very little was known about Dimorphos prior to DART’s impact, including its shape, structure, and material properties. Approach observations and those following the DART impact have provided crucial knowledge that narrows the parameter space relevant to modeling the impact into Dimorphos. Here we present the results of a suite of hydrocode simulations of the DART impact on Dimorphos. Despite remaining uncertainties, initial models of DART’s kinetic impact provide important information about the results of DART (e.g., potential crater size and morphology, ejecta mass) and the properties of Dimorphos. Simulations here suggest that Dimorphos has near-surface strength ranging from a few Pascals to tens of kPa, which corresponds to crater sizes of ~40–60 m. Simulated crater sizes provide a crucial comparison metric for the European Space Agency Hera mission when it arrives at the Didymos system. Hera’s measurement of crater size in combination with measurement of Dimorphos’s mass will allow us to assess our simulations and provide the information needed to make the DART impact experiment both the first test of a planetary defense mitigation mission and the first full-scale planetary defense simulation validation exercise.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sound velocities and thermal equation of state of fcc -iron-nickel alloys at high pressure and high temperature: Implications for the cores of Moon and several planets

Fcc-Fe-Ni alloy is believed to be the most dominant solid constitute of moderate-sized terrestrial planetary cores. Investigating the physical properties, especially the density and sound velocity of Fe-Ni alloys and comparing them with seismic observations is an indispensable approach to constructing compositional models for planetary interiors. In this study, we conducted sound velocity measurements on Fe-Ni alloys with 10 wt.% and 20 wt.% Ni up to ∼13.5 GPa and 1073 K, using the ultrasonic interferometry technique in a multi-anvil apparatus in conjunction with synchrotron radiation. By fitting the experimental data to finite strain equations, the bulk and shear moduli and their pressure and temperature derivatives are derived, yielding K S0 =145.8(14) GPa, G 0 = 73.2(7) GPa, K S0 ’ = 5.89(24), G 0 ’ = 2.89(8), (∂K S /∂T) P = -0.0181(12) GPa/K and (∂G/∂T) P = -0.0393(10) GPa/K for fcc-Fe 80 Ni 20 . An examination of the density-velocity relationship shows that compressional wave velocity is insensitive to temperature within the current pressure and temperature range, while shear wave velocity exhibits a large reduction with increasing temperature. Here, extrapolation of the sound velocities following the finite strain theories suggests that much slower Vs should be expected at pressure and temperature conditions corresponding to those of the lunar core. Possible core density and velocity profiles for other moderate planets and satellites, such as Mars, Mercury, and Ganymede are also calculated.

Equation of state↗
DOE OSTI2026

Passive Microwave Radiometry and Active Radar Sounding as Complementary Tools for Geophysical Investigations of Icy Ocean Worlds

Juno Microwave Radiometer (MWR) observations of Europa and Ganymede offer critical insights into the icy shells of these moons ahead of NASA's Europa Clipper and ESA's JUpiter ICy moons Explorer (JUICE) missions. Both missions are equipped with active radar sounders designed to address key unknowns such as ice shell thickness, thermal state, and composition. In this study, we explore how passive microwave radiometry and active radar sounding can constrain ice shell properties, focusing on Europa. Using modeled microwave brightness temperature observations at 0.6 and 1.2 GHz alongside simulated radar attenuation rate observations, we show that each instrument can independently produce robust ice shell thickness constraints under idealized conditions. We then relax these assumptions, quantifying how uncertainties from non-ideal properties—including convective layers, freezing-point depression, and chloride-doped ice—affect thickness estimates. Finally, we demonstrate how combining observations from these complementary techniques breaks degeneracies between ice shell properties, enabling more robust constraints than either method alone. This approach will maximize the science return of Europa Clipper and JUICE, advancing our understanding of the thermophysical structure and habitability of icy ocean worlds.

58 GEOSCIENCES↗
DOE OSTI2024

Microscale mechanical property variations of Al-substituted LLZO: insights from compression testing and molecular dynamics simulations

Ceramic solid electrolytes based on LLZO (Li 7 La 3 Zr 2 O 12 ) are promising candidates for all-solid-state batteries due to their high ionic conductivity and good apparent stability vs. lithium metal, however they are prone to mechanical failure. Lithium metal intrusions, alongside cell stack pressure, transition polycrystalline solid electrolyte grains into a compressed state that promotes crack propagation and fracture. Here this work examines the mechanical response of Al-substituted LLZO to compressive forces by measuring ultimate strength under pillar compression with a flat punch tip. Failure modes characterized by in situ scanning electron microscopy show diverse splitting patterns arising from internal porosity, grain boundaries, and slip planes. Large correlated variations in compressive strength (0.93–2.63 GPa) and Young's modulus (72.1–150.97 GPa) are observed across microscale regions of the solid electrolyte. Molecular dynamics simulations of LLZO with different porosities describe the variation of compressive strength and Young's modulus, and enable a microscale porosity model to be fit accounting for Young's modulus reduction across the solid electrolyte. Overall, the results indicate the importance of microscale mechanical testing of ceramic solid electrolytes to identify preferential sites for mechanical degradation and Li intrusion, and ensure the robust design of all-solid-state lithium metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Cooperative Effects Associated with High Electrolyte Concentrations in Driving the Conversion of CO2 to C2H4 on Copper

Compared to a conventional electrolyte concentration of 1 M HCOOK, the use of a highly concentrated 7.1 M HCOOK electrolyte increases the Faradaic efficiency (FE) ratio of C2H4/CO from 2.2 +- 0.3 to 18.3 +- 4.8 at -1.08 V vs. reversible hydrogen electrode (RHE) on a Cu gas-diffusion electrode. Based on electrochemical analysis and ab initio molecular dynamics (AIMD) simulation, the identity and concentration of the cation and anion play more important roles in controlling the CO2R reaction pathway than the bulk CO2 solubility and the bulk pH of electrolytes. In situ attenuated reflectance surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) suggests that, unlike 1 M HCOOK, the *CO-bridge-binding mode on Cu is dominant in 7.1 M HCOOK electrolyte, which potentially results in less CO release and higher yield of C2H4. This study demonstrates that although we can tailor the electrolyte composition to shift product selectivity, the factors that control the product selectivity are numerous and cannot be distilled down into one correlated property-reactivity relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating and contrasting the mechanisms for Mg and Ca sulfate ion-pair formation with multi-level embedded quantum mechanics/molecular dynamics simulations

Here, solutions and minerals containing sulfate (SO 4 2- ), and Ca 2+ and Mg 2+ cations, are ubiquitous throughout the lithosphere and are significant components of seawater, thus presenting a prototypical system for the study of strong electrolytes and crystal nucleation mechanisms. However, despite their relative abundance, key questions remain unanswered about the most fundamental atomic-level steps of their mineralization pathways and aqueous dynamics. Here, we carry out enhanced sampling multi-level molecular dynamics (MD) embedded correlated wavefunction theory simulations to elucidate ion-pairing mechanisms for Mg–SO 4 and Ca–SO 4 in concentrated aqueous solution, accurately capturing effects arising from both structural dynamics and electron exchange–correlation. We predict contact-ion-pair formation to be barrierless and highly exoergic for Ca–SO 4 , in agreement with its minimal solubility, whereas for Mg–SO 4 , solvent-shared and contact ion pairs have similar free energies, qualitatively consistent with its higher solubility. Finally, we demonstrate that brief high-temperature pre-equilibration may be utilized to accelerate convergence of free energies in blue-moon-ensemble enhanced-sampling MD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hofstadter butterfly and quantum transport benchmarks in PVA-exfoliated graphene heterostructures

Polymer exposure during van der Waals heterostructure fabrication is widely regarded as compromising the integrity of the electronic system required for hosting emergent quantum physics. This assumption has persisted largely because electronic benchmarking of heterostructures from polymer-exposed graphene has remained limited to only foundational transport metrics, such as mobility and charge inhomogeneity. Here, we challenge this assumption by establishing that graphene heterostructures produced by polyvinyl alcohol (PVA)-assisted exfoliation and encapsulated in hexagonal boron nitride using elevated-temperature lamination satisfy demanding quantum transport benchmarks. Beyond exhibiting ultra-high mobility and ballistic transport, these heterostructures yield quantum scattering times comparable to the best polymer-free devices. Most demanding of all, moiré superlattices from PVA-exposed graphene exhibit Hofstadter butterfly spectra, confirming spatially uniform interlayer coupling across the device area. These results establish that PVA exposure is compatible with low-disorder electronic systems, relaxing the trade-off between scalable fabrication and low-disorder quantum transport. This study motivates further development of polymer-assisted assembly with engineered residue-removal protocols.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tailoring Interlayer Coupling in Few-Layer MoS 2 with Stacking Configuration

Here we manipulated the stacking configuration of a few-layer MoS 2 to investigate the impact of interlayer coupling on electrical band engineering. By simultaneously synthesizing two distinct stacking types of MoS2 islands, wedding cake (W) and spiral (S), on the same substrate, we explored layer-dependent electrical properties under identical experimental conditions. We used multiple scanning probe microscopy techniques to map local electronic properties with respect to the number of layers, stacking configurations, and local heterogeneities. First-principles calculations verified the role of distinct interlayer coupling in terms of the interlayer distance. Our findings highlight the critical role of interlayer coupling in applications of transition metal dichalcogenides.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Permanently Porous Chalcogen-Bonded Organic Framework

The nature of connectivity between constituent atomic or molecular building blocks is fundamental in shaping the properties and functionality of materials. The extrapolation of emergent interatomic interactions to enable functional materials has driven transformative technological advancements. However, the bonding interactions used in material design have been largely static since the emergence of dynamic covalent chemistry ~30 years ago. Here we demonstrate that non-covalent chalcogen bonding (Ch-bonding) is a distinct mode of interatomic connectivity for constructing functional materials by design. This is established by leveraging self-complementary assembly of 1,2,5-telluradiazole moieties to construct a honeycomb-type permanently porous Ch-bonded organic framework, assembled and stabilized solely through non-covalent Te...N contacts. Empirical and computational studies of electronic structure, structural healing and lattice dynamics highlight the pi-type electronic communication, controlled assembly and modulated lattice dynamics in Trip3Tez-I arising directly from the unique nature of the Te...N Ch-bonding that holds substantial implications for next generation crystalline semiconductors. In addition to introducing a distinct class of permanently porous frameworks, this work establishes Ch-bonding as a programmable molecular tool for constructing functional materials with distinct properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magneto-optical Evidence of the Tilting Effect in Coupled Weyl Bands

Theories have revealed the universality of the band tilting effect in topological Weyl semimetals (WSMs) and its implications for the material physical properties. However, the experimental identification of tilted Weyl bands remains less explored. Here, we report the magneto-optical evidence of the tilting effect in WSM niobium phosphide. Specifically, we observe Landau level transitions with rich features that are well reproduced within a model of coupled tilted Weyl points. Our analysis indicates that the tilting effect relaxes the selection rules and leads to transitions that would otherwise be forbidden in the non-tilt case. Additionally, we observe unconventional interband transitions with flat and negative magnetic field dispersions, highlighting the importance of coupling between Weyl points. Our results not only emphasize the significance of the tilting effect in the optical responses of WSMs but also demonstrate magneto-optics as an effective tool for probing the tilting effect in electronic band structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

From vortex to bubble: Unraveling formation of merons and skyrmions in van der Waals ferromagnet $\textrm{Fe}_{5-\textrm{x}}\textrm{GeTe}_2$

Magnetic topology, such as merons and skyrmions, is important from the perspective of both fundamental physics and next-generation spintronic devices. We observe/demonstrate the coexistence of merons and skyrmions in the van der Waals ferromagnet Fe 5-x GeTe 2 . Merons remain stable across a wide temperature range, from 100 K to 290 K, whereas skyrmions are only present within a narrower range from 100 K to approximately 170 K. Our finding reveals that the formation of merons or skyrmions is governed by the local magnetocrystalline anisotropy. Furthermore, the spatial variations in local magnetic anisotropy are attributed to subtle fluctuations in Fe content.

2D materials↗
DOE OSTI2024

Density Measurements of Molten LiF–BeF 2 and LiF–BeF 2 –LaF 3 Salt Mixtures by Neutron Radiography

The densities of eutectic (LiF) 2 –BeF 2 and mixtures of this salt (FLiBe) with LaF 3 were measured by dilatometry and by neutron attenuation from 673 K to 1,073 K. Because LaF 3 has a limited solubility in FLiBe, it was necessary to determine the amount of LaF 3 in solution before the density could be determined. The FLiBe density determination was favorably benchmarked against the literature data. A simple comparison was not available for the LaF 3 –FLiBe mixtures, so extrapolation of published data was necessary based on analysis using the Molten Salt Thermal Properties Database-Thermochemistry, or MSTDB-TC, developed by the US Department of Energy. Solubilities for LaF 3 in FLiBe ranged from 1 to 4 mol % over 673 to 1,073 K. The salt system was heated and cooled over 24 h to evaluate potential changes in composition and hysteresis during the measurement. Changes in the meniscus were observed, and these were included in the correction for density determinations. Salt surface tension may have led to supersaturation of LaF 3 in the salt because the solubility curve was nonlinear with respect to the inverse temperature, as would be expected for an ideal system. Surface tension measurements are currently underway to test this hypothesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Titanium alloy response sensitivity to variations in spectral reconstructions of National Ignition Facility xenon line-emission x-ray sources

Thermomechanical shock experiments on the National Ignition Facility (NIF) aim to study high strain rate dynamic material response. In such experiments, the NIF laser is used to generate high fluence x-ray emission sources, which irradiate material samples of interest. Under sufficiently high x-ray energy deposition, thermomechanical impulses are generated in the materials. While it is known that the characteristics of x-ray generated impulses vary as a function of incident x-ray spectra, it remains unclear how spectral assumptions and uncertainties in NIF spectral reconstructions affect our interpretation of impulsive loading. Here, in this paper, we simulate the response of a standard titanium alloy baseline sample to synthetic analytically derived and measured NIF xenon line-emission x-ray sources with a radiation hydrodynamics code. We vary the source spectral characteristics based on different source reconstruction techniques to understand the resulting variation in baseline sample response and compare the simulated response with experimental results. We find that the response is highly sensitive to assumptions made about the spectral contents and that knowledge of spectral uncertainties bounds our understanding of the resulting material response. The results of this effort help to extend our ability to use baseline material samples to extract quantitative properties from x-ray experiments on the NIF.

Alloys↗
DOE OSTI2024

Location-Specific Microstructure Characterization Within AM Bench 2022 Nickel Alloy 718 3D Builds

Abstract The Additive Manufacturing Benchmark Test Series (AM Bench) is a broad effort to produce rigorous measurement datasets for validating AM computer simulations across the range of processing, structure, and properties, for many additive manufacturing (AM) build methods and material classes. Here, the microstructures of nickel alloy 718 AM Bench 2022 test artifacts produced using laser-based powder bed fusion (PBF-LB), in both as-built and fully heat-treated conditions, are examined. Cross sections are primarily characterized using large area scanning electron microscopy (SEM) electron backscatter diffraction (EBSD) and example analyses of the crystallographic textures are described. These data are part of a large set of in situ and ex situ measurements from both three-dimensional builds and laser tracks on bare plates. All the measurement data are available online with download links at www.nist.gov/ambench .

Levine, L. E. (ORCID:0000000334484229)↗
DOE OSTI2025

Electronic Spin Relaxation and Clustering in High-Pressure High-Temperature Synthesized Microcrystalline Diamond Particles with Reduced Nitrogen Content

The negatively charged nitrogen-vacancy (NV – ) color center in diamonds is widely studied because of numerous applications of this unique quantum system in sensing and quantum information sciences. While substitutional nitrogen is required to form the NV – centers in diamond, it also yields other paramagnetic defects─primarily the neutrally charged substitutional nitrogen centers (P1)─that decrease NV – spin coherence, which in turn degrades performance in applications. Herein, we investigate high-pressure high-temperature synthesized diamond microparticles (ca. 140–185 μm) having lower─ranging from 3 to 38 ppm─than the typical nitrogen content of type 1b diamond ( ca. 100 ppm and higher) typically used for the production of fluorescent diamond particles with NV – centers. A suite of electron paramagnetic resonance, optically detected magnetic resonance, and nuclear magnetic resonance methods are used to characterize spin properties of P1 and NV – centers in the particles. Upon decreasing the nitrogen content from 29 to 3 ppm, the ensemble NV – T 2 relaxation time increased by about 3-fold as measured directly in the Hahn Echo experiment at magnetic field of 1.2 T. Analysis of electronic relaxation of P1 centers revealed the existence of at least two distinct populations of P1 centers, consisting of fast and slower relaxing spins and allowed for an estimation of local concentrations. Even with <10 ppm nitrogen contents, the analysis indicated a highly heterogeneous distribution of P1 centers, suggesting the possibility of P1 spin clustering even at low nitrogen concentrations. The combined data demonstrate that the particles prepared from HPHT diamond with a low nitrogen content offer improved spin properties that are beneficial for NV – sensing applications.

Carbon↗
DOE OSTI2024

How Rigid Are Anthranilamide Molecular Electrets?

As important as molecular electrets are for electronic materials and devices, conformational fluctuations strongly impact their macrodipoles and intrinsic properties. Herein, we employ molecular dynamics (MD) simulations with the polarizable charge equilibrium (PQEq) method to investigate the persistence length (L P ) of molecular electrets composed of anthranilamide (Aa) residues. The PQEq-MD dissipates the accepted static notions about Aa macromolecules, and L P represents the shortest Aa rigid segments. The classical model with a single L P value does not describe these oligomers. Introducing multiple L P values for the same macromolecule follows the observed trends and discerns the enhanced rigidity in their middle sections from the reduced stiffness at their terminal regions. Furthermore, L P distinctly depends on solvent polarity. The Aa oligomers maintain extended conformations in nonpolar solvents with L P exceeding 4 nm, while in polar media, increased conformational fluctuations reduce L P to about 2 nm. These characteristics set key guidelines about the utility of Aa conjugates for charge-transfer systems within organic electronics and energy engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗