Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Moment equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Higher moment equations and the distribution function of the solar-wind plasma.

Study of the higher-moment equations for a collisionless fully ionized plasma. For a collisionless, heat-conducting plasma, the distribution function f is cylindrically symmetric about the direction of the magnetic field. It is shown that under a certain assumption the fourth moments of f can be expressed as simple functions of lower moments. Thus no higher-moment terms appear in the third-moment equations. The two third-moment equations, which are obtained in a simple form, join other lower-moment equations to form a closed set of moment equations. The new equations can be used to study the thermal anisotropy and the heat flux of the solar-wind proton. A special case of the cylindrically symmetric distribution function f is found to resemble the proton distribution function reconstructed from solar-wind data, and this resemblance justifies the assumption needed for decoupling the moment equations.

Whang, Y. C.↗
NASA NTRS1959

Investigation of the Stability of Very Flat Spins and Analysis of Effects of Applying various Moments Utilizing the Three Moment Equations of Motion

Based on linearized equations of motion utilizing only the three moment equations and assuming only flat-spin conditions, it appears that contemporary designs (with the moment of inertia about the wing axis I(sub Y) considerably greater than the moment of inertia about the fuselage axis I(sub X) having positive values of C(sub l, sub p) (rolling-moment coefficient due to rolling) or positive values of C(sub l, sub beta) (rolling-moment coefficient due to sideslip) will probably not have a stable spin in the flat-spin region near an angle of attack of 90 deg. If the damping in pitch in flat-spin attitudes is zero, stable flat-spin conditions may not be possible on an airplane having the mass primarily distributed along the wings. The effect of moving ailerons with the spin or the effect of applying a positive pitching moment producing recovery for contemporary fighter designs will be greatest for large negative values of C(sub n, sub beta) (yawing-moment coefficient due to sideslip). In addition, for a certain critical value of positive C(sub n, sub beta), the rolling moment applied by moving ailerons with the spin or the application of a positive pitching moment will have no effect on reducing the spin rate.

Klinar, Walter J.↗
NASA NTRS1991

A shock-layer theory based on thirteen-moment equations and DSMC calculations of rarefied hypersonic flows

Grad's thirteen-moment equations are applied to the flow behind a bow shock under the formalism of a thin shock layer. Comparison of this version of the theory with Direct Simulation Monte Carlo calculations of flows about a flat plate at finite attack angle has lent support to the approach as a useful extension of the continuum model for studying translational nonequilibrium in the shock layer. This paper reassesses the physical basis and limitations of the development with additional calculations and comparisons. The streamline correlation principle, which allows transformation of the 13-moment based system to one based on the Navier-Stokes equations, is extended to a three-dimensional formulation. The development yields a strip theory for planar lifting surfaces at finite incidences. Examples reveal that the lift-to-drag ratio is little influenced by planform geometry and varies with altitudes according to a 'bridging function' determined by correlated two-dimensional calculations.

Cheng, H. K.↗
NASA NTRS1974

Wave propagation in a random medium - A complete set of the moment equations with different wavenumbers

The propagation of waves in a random medium is studied in the 'quasi-optics' and the 'Markov random process' approximations. Under these assumptions, a Fokker-Planck equation satisfied by the characteristic functional of the random wave field is derived. A complete set of moment equations with different transverse coordinates and different wave numbers is then obtained from the Fokker-Planck equation of the characteristic functional. The application of those results to the pulse smearing of the pulsar signal and the frequency correlation function of the wave intensity in interstellar scintillation is briefly discussed.

Lee, L. C.↗
NASA NTRS1991

Advances in modeling the pressure correlation terms in the second moment equations

In developing turbulence models, various model constraints were proposed in an attempt to make the model equations more general (or universal). The most recent of these are the realizability principle, the linearity principle, the rapid distortion theory, and the material indifference principle. Several issues are discussed concerning these principles and special attention is payed to the realizability principle. Realizability (defined as the requirement of non-negative energy and Schwarz' inequality between any fluctuating quantities) is the basic physical and mathematical principle that any modeled equation should obey. Hence, it is the most universal, important and also the minimal requirement for a model equation to prevent it from producing unphysical results. The principle of realizability is described in detail, the realizability conditions are derived for various turbulence models, and the model forms are proposed for the pressure correlation terms in the second moment equations. Detailed comparisons of various turbulence models with experiments and direct numerical simulations are presented. As a special case of turbulence, the two dimensional two-component turbulence modeling is also discussed.

Shih, Tsan-Hsing↗
NASA NTRS1992

Advances in modeling the pressure correlation terms in the second moment equations

In developing turbulence models, various model constraints were proposed in an attempt to make the model equations more general (or universal). The most recent of these are the realizability principle, the linearity principle, the rapid distortion theory, and the material indifference principle. Several issues are discussed concerning these principles and special attention is payed to the realizability principle. Realizability (defined as the requirement of non-negative energy and Schwarz' inequality between any fluctuating quantities) is the basic physical and mathematical principle that any modeled equation should obey. Hence, it is the most universal, important and also the minimal requirement for a model equation to prevent it from producing unphysical results. The principle of realizability is described in detail, the realizability conditions are derived for various turbulence models, and the model forms are proposed for the pressure correlation terms in the second moment equations. Detailed comparisons of various turbulence models with experiments and direct numerical simulations are presented. As a special case of turbulence, the two dimensional two-component turbulence modeling is also discussed.

Shih, Tsan-Hsing↗
NASA NTRS1982

Linear force and moment equations for an annular smooth shaft seal perturbed both angularly and laterally

Coefficients are derived for equations expressing the lateral force and pitching moments associated with both planar translation and angular perturbations from a nominally centered rotating shaft with respect to a stationary seal. The coefficients for the lowest order and first derivative terms emerge as being significant and are of approximately the same order of magnitude as the fundamental coefficients derived by means of Black's equations. Second derivative, shear perturbation, and entrance coefficient variation effects are adjudged to be small.

Fenwick, J.↗
NASA NTRS1954

Lift and moment equations for oscillating airfoils in an infinite unstaggered cascade

Aerodynamic coefficients similar to those of the isolated airfoil are obtained as functions of the cascade geometry and the phasing between successive blades; the phasings considered are zero, 90 degrees, and 180 degrees. These aerodynamic coefficients are plotted for the special case when all the airfoils are vibrating in bending in phase (360 degree phasing). It is shown that the effect of cascading for this case is to reduce greatly the aerodynamic damping. (author)

Mendelson, Alexander↗
NASA NTRS1993

Carrying the mass flux terms exactly in the first and second moment equations of compressible turbulence

In compressible turbulence models, it is assumed that the Favre-mean velocities are suitable approximations to the Reynolds-mean velocities in order to close unknown terms. This neglects, in the mean momentum and energy equations, the contribution to the stress and work terms by the mean of the fluctuating Favre velocity, a quantity proportional to the turbulent mass flux. As the stress and work terms do not introduce any new unknown correlations requiring closure in either k-epsilon or Reynolds stress closures and because the exact form of the terms can, with little additional work, be carried there is no need to make any modeling assumptions. In the Reynolds stress equations the viscous terms appear naturally in Reynolds variables while the problem is posed in Favre variables. In the process of splitting the viscous terms into the viscous transport terms, carried in Favre variables, and the dissipation terms, carried in Reynolds variables, important contributions from the mass flux appear. The accurate accounting of these terms is important for any consistent near wall modeling and the retention of the mass flux terms is important in complex compressible turbulent flows.

Ristorcelli, J. R.↗
NASA NTRS1984

Problems in simulating the stratocumulus-topped boundary layer with a third-order closure model

The Andre et al. (1976, 1978) third-order closure model, in which the time rate of change terms, the relaxation and rapid effects for pressure-related terms, and the clipping approximation are used along with the quasi-normal closure, is invoked in the study of turbulence in a cloudy layer that is radiatively cooled from above. A spurious oscillation whose greatest amplitude lies near the inversion is shown by analysis to arise from the mean gradient and buoyancy terms of the triple-moment equations. An attempt is made to damp the oscillation through the introduction of diffusion terms into the triple-moment equations. The results obtained are noted to be sensitive to the ad hoc eddy coefficient applied in the third-moment equations.

Moeng, C.-H.↗
NASA NTRS2014

The Aerodynamics of Axisymmetric Blunt Bodies Flying at Angle of Attack

The Mars Science Laboratory entry capsule is used as an example to demonstrate how a blunt body of revolution must be treated as asymmetric in some respects when flying at a non-zero trim angle of attack. A brief description of the axisymmetric moment equations are provided before solving a system of equations describing the lateral-directional moment equations for a blunt body trimming at an angle of attack. Simplifying assumptions are made which allow the solution to the equations to be rearranged to relate the roll and yaw stability with sideslip angle to the frequency of oscillation of the vehicle body rates. The equations show that for a blunt body the roll and yaw rates are in phase and proportional to each other. The ratio of the rates is determined by the static stability coefficients and mass properties about those axes. A trajectory simulation is used to validate the static yaw stability parameter identification equation and a simple method of identifying the oscillation frequency from the body rates. The approach is shown to successfully extract the modeled yaw stability coefficient along a simulated Mars entry in agreement with data earlier analysis of MSL flight data.

Schoenenberger, Mark↗
NASA NTRS1991

Six-degree-of-freedom simulation of an astronaut detumble system

The problem of stabilizing the attitude of an untethered astronaut in a three-axis tumble is addressed. A simple six thruster detumbling system mounted on the astronaut's Portable Life Support System backpack is analyzed as a possible solution. A six-degree-of-freedom dynamical model is constructed using the Clohessy-Wiltshire equations, Euler's moment equations, and quaternions. The six thruster system produces both moments and forces when activated. However, it is shown that the thrust forces acting on the body during detumbling do not significantly affect the translational motion.

Fowler, W. T.↗