Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Molten Electrolytes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Molten Salt Electrolytes: Computational Analysis of Transport, Electrochemical Properties and Designing New Mixtures

Electric aircraft propulsion has gained a traction over the last decade due to possible high-energy density electrochemistries with reasonable cycle life and identification of non-flammable chemistries that can guarantee much better safety. Commercial Li-ion batteries cannot reach such high capacities because of weight limitations that arise from the widely used intercalation electrodes. Also, use of organic electrolytes make them highly susceptible to fire on exposure to air and humidity. Currently, use of Lithium metal anode along with conversion electrochemistries such as Li-O2 and Li-S are being pursued to achieve such high energy densities. Safer inorganic solid-state electrolytes, recently discovered Water-in-Salt electrolytes, molten salt electrolytes are some of the alternatives being pursued for a safer/non-flammable battery. Of these safer alternatives, molten-salt electrolytes offer some attractive properties: liquid at operating temperatures resulting in better electrode-wetting, stable interface with Li-metal anodes and good ionic conductivity; their only drawback being high operating temperatures. In this talk, we will discuss some of the computational studies, driven via atomistic simulations, of the properties of molten-salt electrolytes including transport mechanism and interface stability. We will also discuss predicting electrochemical properties of these high-temperature electrolytes. Further, we will discuss a thermodynamic approach to predicting new molten-salt eutectics with lower melting points.

Molten Salt Electrolytes↗
NASA NTRS1972

Rechargeable Al/Cl2 battery with molten AlCl4/-/ electrolyte.

A molten salt system based on Al- and Cl2 carbon electrodes, with an AlCl3 alkali chloride eutectic as electrolyte, offers promise as a rechargeable, high energy density battery which can operate at a relatively low temperature. Electrode kinetic studies showed that the electrode reactions at the Al anode were rapid and that the observed passivation phenomena were due to the formation at the electrode surface of a solid salt layer resulting from concentration changes on anodic or cathodic current flow. It was established that carbon electrodes were intrinsically active for chlorine reduction in AlCl3-alkali chloride melts. By means of a rotating vitreous carbon disk electrode, the kinetic parameters were determined.

Holleck, G. L.↗
NASA NTRS1990

Copper Chloride Cathode For Liquid-Sodium Cell

Rechargeable liquid-sodium cell with copper chloride cathode offers substantial increase in energy density over cells made with other cathode materials. Unit has theoretical maximum energy density of 1135 W.h/kg. Generates electricity by electrochemical reaction of molten sodium and solid copper chloride immersed in molten electrolyte, sodium tetrachloroaluminate at temperature of equal to or greater than 200 degrees C. Wall of alumina tube separates molten electrolyte from molten sodium anode. Copper chloride cathode embedded in pores of sintered nickel cylinder or directly sintered.

Bugga, Ratnakumar V.↗
NASA NTRSDate not supplied

Computational Tools to Design Molten Salt Electrolytes for High-Temperature Environments

Current Li-ion batteries are designed for a small operating window of 5 °C to 55 °C. Modifications to the electrolyte for operation in Mars atmosphere extended this range on the lower bound to ~ -40 °C. These operating-temperature ranges are far from those presented in high-temperature environments, such as the Venus surface, where temperatures are around 450 °C. Protecting the state-of-the-art Li-ion batteries require insulations that decreases the volumetric capacity and limiting the operational time-window. These unique challenges require a paradigm shift in materials used for designing high-temperature batteries. Molten salt electrolyte-based batteries offer a plausible route to designing high-temperature batteries. ZEBRA batteries are known to be one of the safest energy storage devices operating at 270-350 °C. Nitrate based eutectics, operating at 150 °C have also been used in Li-O2 batteries. In this study, we will examine molten-salt electrolyte transport and electrochemical properties using first-principles computations and benchmark against experiments. Further, we will present thermodynamics-based models for designing and predicting melting point of molten salt mixtures. Based on these computational tools, new molten salt mixtures designed with desired operating temperatures and electrochemical windows will be presented. Implications of these new eutectics in the context of high-temperature environment exploration will also be discussed.

Balachandran Radhakrishnan↗
DOE OSTI2026

Electro-carburization of mild steel through two-step reaction in molten-salt electrolyte

The rapid carburization of mild steel is demonstrated via the electrochemical deposition of solid carbon, followed by thermochemical iron-carbon (Fe-C) reaction using a molten lithium-potassium carbonate (LiKCO 3 ) salt electrolyte and carbon dioxide as the carbon source. Depth-dependent microstructural and compositional changes in the steel are shown to be controlled by the applied cell voltage and reaction temperatures. Reaction temperatures above the Fe-C eutectoid temperature promote faster carburization due to carbon dissolution into austenite. The carbon deposition rate is regulated by the applied cell voltage: At - 2.4 V, carbon deposition occurs much faster than its diffusion into the steel, resulting in the accumulation of a carbon-rich layer exceeding 1 mm, which does not diffuse into the steel. In contrast, at - 1.8 V, all deposited carbon effectively diffuses into the steel, leaving a minimal external deposit. In both cases, carbon ingress forms a carbide-rich surface layer and precipitates additional carbides along the grain boundaries within the steel electrode. This method offers a potential approach to increase the carbon content of mild or low-carbon steel feedstocks, such as scrap or direct reduced iron, for industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2013

Advanced Materials and Fabrication Techniques for the Orion Attitude Control Motor

Rhenium, with its high melting temperature, excellent elevated temperature properties, and lack of a ductile-to-brittle transition temperature (DBTT), is ideally suited for the hot gas components of the ACM (Attitude Control Motor), and other high-temperature applications. However, the high cost of rhenium makes fabricating these components using conventional fabrication techniques prohibitive. Therefore, near-net-shape forming techniques were investigated for producing cost-effective rhenium and rhenium alloy components for the ACM and other propulsion applications. During this investigation, electrochemical forming (EL-Form ) techniques were evaluated for producing the hot gas components. The investigation focused on demonstrating that EL-Form processing techniques could be used to produce the ACM flow distributor. Once the EL-Form processing techniques were established, a representative rhenium flow distributor was fabricated, and samples were harvested for material properties testing at both room and elevated temperatures. As a lower cost and lighter weight alternative to an all-rhenium component, rhenium- coated graphite and carbon-carbon were also evaluated. The rhenium-coated components were thermal-cycle tested to verify that they could withstand the expected thermal loads during service. High-temperature electroforming is based on electrochemical deposition of compact layers of metals onto a mandrel of the desired shape. Mandrels used for electro-deposition of near-net shaped parts are generally fabricated from high-density graphite. The graphite mandrel is easily machined and does not react with the molten electrolyte. For near-net shape components, the inner surface of the electroformed part replicates the polished graphite mandrel. During processing, the mandrel itself becomes the cathode, and scrap or refined refractory metal is the anode. Refractory metal atoms from the anode material are ionized in the molten electrolytic solution, and are deposited onto the cathodic mandrel by electrochemical reduction. Rotation of the mandrel ensures uniform distribution of refractory material. The EL-Form process allows for manufacturing in an inert atmosphere with deposition rates from 0.0004 to 0.002 in./h (10.2 to 50.8 m/h). Thicknesses typically range from microns to greater than 0.5 in. (13 mm). The refractory component produced is fabricated, dependably, to within one micron of the desired tolerances with no shrinkage or distortion as in other refractory metal manufacture techniques. The electroforming process has been used to produce solid, nonporous deposits of rhenium, iridium, niobium, tungsten, and their alloys.

Gorti, Sridhar↗
DOE OSTI2026

Precious metal oxygen-evolving anodes for electrolytic reduction of metal oxides in molten LiCl-Li 2 O electrolyte

Understanding the electrochemical stability of oxygen-evolving anode materials in molten salt electrolytes is essential to enable decarbonized electrolytic reduction of metal oxides (e.g., used nuclear oxide fuels). Here, this work investigated three precious metals (Ir, Ru, and Pt) as oxygen-evolving anodes in molten LiCl-Li 2 O (99.0-1.0 wt%) at 650 °C. For consistent measurements, this work employed a three-electrode cell comprised of a two-phase Li-Bi (65-35 at%) reference electrode and a NiO counter electrode. Anodic polarization behavior of each anode was investigated via cyclic voltammetry (CV) and chronoamperometry. The onset potential for oxygen evolution was observed at E > 2.9 V (vs. Li/Li + ) for the Ir and Ru anodes and anodic current density was as high as 1.0 A cm -2 at 3.23 V. The dimensional stability of each anode was evaluated from long-term electrolysis experiments (10.0-32.1 h) at 3.23 V. Rapid consumption of the Pt anode was observed after the application of 26,453 C cm -2 with a reduction in diameter of about 15.8% due to the formation of a non-protective Li 2 PtO 3 compound. The formation of this compound was also observed during CV measurements as additional anodic waves at potentials more negative than that of oxygen evolution. In contrast, both the Ir and Ru anodes exhibited excellent dimensional stability with a reduction in diameter or thickness of less than 1.5% even after applying greater charge density of ~41,100 C cm -2 , demonstrating superior stability during oxygen evolution in the LiCl-Li 2 O electrolyte.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1994

Fundamental Aspects of Ion Transport in Solid Electrolytes

Solid electrolytes (also termed as superionic solids or fast ion conductors) are characterized by high electrical conductivity, comparable to concentrated liquid electrolytes or even molten salt electrolytes, made possible by rapid transport of ions in the crystalline lattice.

electrochemistry solid state ionics superionic sol↗
NASA NTRS1990

Symposium on Rechargeable Lithium Batteries, Hollywood, FL, Oct. 19-24, 1989, Proceedings

Recent advances in the technology and applications of rechargeable Li cells are discussed in reviews and reports. A general overview of the field is provided, and sections are devoted to organic electrolyte systems, polymeric electrolyte systems, inorganic electrolytes systems, and molten-salt electrolytes. Particular attention is given to electrolyte stabilization, the effects of organic additives on electrolyte performance, a cycle-life sensor, consumer-product applications, in situ measurements of gas evolution in Li secondary cells, ultrathin polymer cathodes, electrochemical growth of conducting polymers, and sealing Li/FeS(x) cells for a bipolar battery.

Subbarao, S.↗
DOE OSTI2026

Development of a Chlorine Cathode and Anode Basket Assembly for Production of Uranium Chloride

A chlorine cathode has been developed for in situ chlorination of metals, oxides, and oxychlorides in molten chloride electrolytes that could be used to support synthesis of chloride fuel salts for molten salt reactors. The chlorine cathode is designed to electrochemically reduce chlorine gas to generate chloride ions that, when paired with a metal anode, chlorinate that metal as it is oxidized into the salt. The designed porous carbon electrode effectively distributes Cl 2 to the electrode surface and efficiently generates Clions in the molten chloride electrolyte. This report highlights recent improvements made to the electrode assembly, with a focus on operational control of the anode basket stability. Synthesis tests demonstrated the successful chlorination of uranium metal, resulting in 3.6 wt% uranium generated in the LiCl-KCl base salt in 45 minutes, performed in a bench-scale chlorination apparatus. Higher concentrations could be achieved by applying longer chlorination times or increasing the amount of uranium loaded in the anode basket. Overall, the chlorine cathode can be used with an appropriately designed anode to chlorinate uranium in situ for synthesis of molten salt reactor fuel salts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1982

Studies of metals electroprocessing in molten salts

Fluid flow patterns in molten salt electrolytes were observed in order to determine how mass transport affects the morphology of the metal deposit. Studies conducted on the same metal, both in aqueous electrolytes in which coherent solid electrodeposits are produced, as well as in transparent molten salt electrolytes are described. Process variables such as current density and composition of the electrolyte are adjusted to change the morphology of the electrodeposit and, thus, to permit the study of the nature of electrolyte flow in relation to the quality of the electrodeposit.

Sadoway, D. R.↗
NASA NTRS2010

Performance Testing of Molten Regolith Electrolysis with Transfer of Molten Material for the Production of Oxygen and Metals on the Moon

Previously, we have demonstrated the production of oxygen by electrolysis of molten regolith simulants at temperatures near 1600 C. Using an inert anode and suitable cathode, direct electrolysis (no supporting electrolyte) of the molten silicate is carried out, resulting in the production of molten metallic products at the cathode and oxygen gas at the anode. Initial direct measurements of current efficiency have confirmed that the process offer potential advantages of high oxygen production rates in a smaller footprint facility landed on the moon, with a minimum of consumables brought from Earth. We now report the results of a scale-up effort toward the goal of achieving production rates equivalent to 1 metric ton O2/year, a benchmark established for the support of a lunar base. We previously reported on the electrochemical behavior of the molten electrolyte as dependent on anode material, sweep rate and electrolyte composition in batches of 20-200g and at currents of less than 0.5 A. In this paper, we present the results of experiments performed at currents up to 10 Amperes) and in larger volumes of regolith simulant (500 g - 1 kg) for longer durations of electrolysis. The technical development of critical design components is described, including: inert anodes capable of passing continuous currents of several Amperes, container materials selection, direct gas analysis capability to determine the gas components co-evolving with oxygen. To allow a continuous process, a system has been designed and tested to enable the withdrawal of cathodically-reduced molten metals and spent molten oxide electrolyte. The performance of the withdrawal system is presented and critiqued. The design of the electrolytic cell and the configuration of the furnace were supported by modeling the thermal environment of the system in an effort to realize a balance between external heating and internal joule heating. We will discuss the impact these simulations and experimental findings have on the design of a suitable prototype for lunar applications

Sibille, Laurent↗
NASA NTRS1982

Electro Processing Research

Electroprocessing which is concerned with fluid dynamics of the electroreduction process to determine how it may be modified to improve the quality of the deposit was studied. Experimental techniques are used in this research. These techniques include laser Schlieren photography, laser Doppler velocimetry, and frequency spectrum analysis. Projects involve fluid flow studies of zinc plating in aqueous and molten salt electrolytes, study of cell design for magnesium chlorides electrolysis, digital signal analysis of manganese electrodeposition in molten chlorides, and electroplating of molybdenum from low melting salts. It is anticipated that the use of refractory metals as constructed materials in engineering will increase. Their electrodeposition from molten salt electrolytes is important in the extraction metallurgy of refractory metals.

Source record↗
DOE OSTI2024

Chemical and electrochemical pathways to low-carbon iron and steel

Currently, the iron and steel industry is responsible for 7% of global CO 2 emissions. In this review, we summarize the operational principles of current emissions-intensive steelmaking technologies and review emerging low- and zero-carbon technologies that could substantially reduce emissions. Current technologies that are discussed include blast furnaces, electric arc furnaces, and smelting. Promising low-carbon routes include use of alternative reductants for ore processing (hydrogen direct reduction, hydrogen plasma-smelting, hydrogen smelting, and ammonia-based reduction), electrolytic iron production (with aqueous and molten oxide electrolytes) and biocarbon-based electric arc furnace operation. Advantages of each approach are presented, and remaining research hurdles are identified.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multi-species electrolyte migration kinetics with directed flow

Here, this paper investigates an electrochemical process designed to control mixing kinetics in liquid electrolytes. The process utilizes an electrochemical cell with anode and cathode chambers connected by a channel without a membrane. This configuration depletes multiple electroactive species in the cathode chamber while selectively replenishing them in the anode chamber. A key application is the removal of impurity species from the cathode chamber electrolyte and the selective replenishment of primary electroactive species in the anode chamber. Aqueous cell experiments were conducted to validate the theoretical model, and simulations were performed for molten salt electrolytes. This approach minimizes waste by reducing the need for additional electrolyte supplies and extends the utilization of anion species, contributing to environmentally sustainable electrochemical materials processing.

Electrochemical Process↗